ST1332 MICR Printer
| Source Technologies MICR Printers |
Fully refurbished with 90-day warranty
4527-MN1 1332 MICR
Looking for 1332 Parts?
Magnetic Ink Character Recognition (MICR) printing
Provides a secure, flexible method of printing checks on demand.
Issuing checks and other negotiable documents presents a wide range of issues that, if not managed properly, can cost your company hundreds of thousands of dollars a year. IBM's Infoprint 1000 and 4000 printer families help you securely and efficiently manage your check issuance systems. Whether in a production or on-demand environment, IBM's MICR printers automate your check issuance and offer improved security, greater control and total flexibility.
Improved security
IBM MICR printers offer extensive hardware security features including MICR toner sensing, reprint suppression, jam recovery disable and tray locks. When combined with payment software, higher levels of security and control are available like print data encryption/decryption, IP address & electronic serial confirmation and bidirectional print verification. These features virtually eliminate official check fraud by offering the most secure check issuance system available today.
Greater control
With IBM's MICR printers you will gain full control over your critical business processes with enterprise-wide visibility of all disbursements. Configurable, real-time approval cycle & exception handling and complete audit trail & centralized reporting make these systems robust and easy-to-use.
Total flexibility
IBM engineers a wide range of printers specifically for printing MICR documents. Whether you require desktop, workgroup, light-production or production MICR printing, you will find a printer that is right for you. Whether you want to automate your check issuance system or upgrade your negotiable documents system, IBM Infoprint 1000 secure MICR printers can help make a critical difference in daily operations. Excessive manual processes, which are intended to reduce check issuance errors and control official check fraud, are costly and oftentimes ineffective.
On-demand MICR check printing can streamline your issuance processes, saving your organization time and money, while also reducing or even eliminating official check fraud.
In distributed locations, you can achieve secure, on-demand check printing with centralized control and management oversight High priorities for anyone issuing significant volumes of checks including staffing, hospitality, insurance, government and of course, banks and credit unions.
To streamline check issuance as part of complex business process workflows, you can opt for MICR multi-function printers that consolidate functions including printing, scanning, copying and faxing.
Comprehensive solutions
In cooperation with Source Technologies, IBM's exclusive MICR provider, IBM can help you equip your organization with comprehensive solutions that include reliable IBM Infoprint 1000 MICR printers with payment systems software that integrates with your enterprise systems to provide even higher levels of security and control.
Whether you are looking to print locally, corporate-wide, or inter-enterprise, these solutions offer the most flexible and secure way to print checks on-demand.
Enhanced print security
With bi-directional communication, centralized approval capability, and real-time monitoring of print activity and job status, you can have constant oversight of your printing systems. In addition, advanced SSL and 3-DES encryption can help to ensure data privacy and security throughout the entire distributed process.
Reduce risk and cost
With an IBM Infoprint 1000 MICR solution you can replace costly pre-printed check stock and other forms with high-quality simplex or duplex printing that can include logos, bar codes and signatures. It will also enable you to reduce labor costs and fixed operating costs, while also dramatically reducing the likelihood of official check fraud.
| Supplies | |
| Toner Cartridge 75p4302 75p4303 | 75P4303 IBM Return Program High Yield Toner Cartridge New 75p4303 75p4302 21K Page yield (New) $399.00 |
| Fuser Unit 56p1333 | |
| Fuser Maintenance Kit 56p1409 | |
| Options | |
 75p4687 4820 Card for IPDS & SCS/TNe | |
75p4700 4821 ImageQuick Card | |
75p4701 75p4698 4870 Bar Code Card | |
| 75p4696 4120 Token-Ring | 75p4696 Token Ring Card Fully refurbished with 90-day warranty 75P4696 Retired, no longer available: Contact for alternatives |
 75p4833 4162 Ethernet 10/100BaseTX | |
 75p4706 4138 RS-232C Serial Interface card | |
 75p4707 4139 Parallel 1284-B Interface card |
|
 28p1836 4121 Token-Ring-3 Port |
|
 28p1839 4163 Ethernet 10/100BaseTX-1 Port | |
 28p1841 4165 Ethernet 10/100TX/10Base/2T | |
 28p1840 4164 Ethernet 10/100BaseTX-3 Port | |
 28p1842 4141 Twinax/Coax Adapter for SCS | |
 28p1845 4132 External Serial Adapter | |
 53p7947 4401 250-Sheet Duplex Unit | |
 28p1980 4502 500-Sheet Tray | |
| 28p1982 400-sheet Universal | |
 28p1983 4505 250-Sheet Drawer | |
 28p1984 4506 500-Sheet Drawer | |
| 28p1985 4507 250-Sheet Universal Adjustable Drawer | |
| 28p1986 4508 400-Sheet Universal Adjustable Drawer | |
 28p1987 4511 Envelope Feeder | |
 28p1988 4520 2000-Sheet Drawer (Letter) | |
 28p1989 4521 2000-Sheet Drawer (A4) | |
 28p1990 4620 Output Expander | |
 28p1991 4621 StapleSmart Finisher | |
 28p1993 4630 High Capacity Output Stacker | |
 28p1994 Mailbox | |
53p7601 4308 8 MB Memory DIMM | |
53p7602 4316 16 MB Memory DIMM | |
53p7603 4332 32 MB Memory DIMM | |
53p7604 4364 64 MB Memory DIMM | |
53p7605 4390 128 MB Memory DIMM |
|
75p4690 4036 16 MB Flash Card | |
75p4691 4038 32 MB Flash Card | |
| 75p4692 4329 20+GB Hard disk with Adapter | |
75p4693 4881 Optra Forms**32 MB Flash Card | 75P4693 Optra Forms 32MB Flash New 75P4693 (New) Retired, no longer available: Contact for alternatives |
75p4694 4876 Optra Forms**16 MB Flash Card | |
| 75p4695 4877 Optra Forms**20+GB Hard Disk | 75P4695 Optra Forms 20+GB Hard Disk New 75P4695 (New) Retired, no longer available: Contact for alternatives |
| 4180 10 ft. Parallel Cable | |
| 4181 20 ft. Parallel Cable | |
| 4183 50 ft. Serial Cable | |
 4501 250-Sheet Tray | 4527 FC4501 Paper Tray Fully refurbished with 90-day warranty 4527 FC4501 Retired, no longer available: Contact for alternatives |
| 4503 250-Sheet Universal Tray | |
| 4504 400-Sheet Universal Tray |
Model Abstract 4527-001
The IBM 4527 Infoprint 1332 Model 001 is a low-voltage base model with 32 MB of memory soldered onboard.Model Abstract 4527-N01
The IBM 4527 Infoprint 1332 Model N01 is a low-voltage network model. with 64 MB of memory soldered onboard.Model Abstract 4527-004
The IBM 4527 Infoprint 1332 Model 004 is a low-voltage base government model with 32 MB of memory soldered onboard.Model Abstract 4527-N04
The IBM 4527 Infoprint 1332 Model N04 is a low-voltage network government model with 64 MB of memory soldered onboard.| Highlights |
- The Infoprint 1332 (35 PPM maximum Speed) provides a high-speed laser printer with the highest levels of reliability, flexible input, output, and finishing options, and a smart implementation of networking options that small to medium-size workgroups will appreciate.
Description |
This printer is ideal for small, medium, and even large workgroups because of its speed, scalable input and output capacity, durability, and highly reliable printing. The IBM Infoprint 1332 is small enough to fit on a desktop but can also be adapted to floor-standing units with optional input options that can enable input capacities up to 3850 sheets. These 1332 printers also offer a wide range of output options, including stapling capabilities which can expand the printers' output capacity up to 2750 sheets on the Infoprint 1332.
This printer supports a robust line of networking options, which includes Fast Ethernet, Token-Ring, Twinax, and Coax. All models have a Universal Serial Bus (USB) port standard for local connections and optional parallel, and serial connections are available. The base model additionally comes with parallel standard. In terms of datastreams, the capability to integrate PCL 6 and PostScript 3 emulation, Page Printer Data Stream (PPDS), and PDF v1.2 and PDF v1.3 come standard; Intelligent Printer Data Stream (IPDS) is optional.
Infoprint 1332 PrinterThe Infoprint 1332 is a monochrome printer that supports up to A4/Letter-size media at up to 35 pages per minute (PPM).
Infoprint 1332 Models
The printer comes in base models and network models.
- Base Models:
The base models come standard with 32 MB of memory, a 100-sheet auxiliary tray, and one 250-sheet drawer. Standard input capacity is 350 sheets and standard output capacity is 250 sheets. Model 001 is the low-voltage model and 002 is the high-voltage model.
- Network Models:
The network models come standard with 64 MB of memory, a 100-sheet auxiliary tray, one 250-sheet drawer, and a 10/100BaseTX Fast Ethernet port. Standard input capacity is 350 sheets and standard output capacity is 250 sheets. Model n01 is the low-voltage model and n02 is the high-voltage model.
All models have a maximum input capacity of 3,850 sheets and a maximum output capacity of 2,750 sheets.
The Infoprint 1332 has special models for the U.S. government. Model 004 is the base low-voltage model and 005 is the base high-voltage model. Model n04 is the network low-voltage model and n05 is the network high-voltage model.
High Performance Controller
The Infoprint 1332 controller features a 300 MHz processor. It comes with PostScript 3 and PCL 6 emulation, PDF v1.2 and v1.3 as standard data streams and a PPDS migration tool.
- Memory:
The controller has two slots for memory DIMMs, two slots for flash memory cards or application solution cards, and one slot for internal network adapters, local adapters, or hard drives.
The base models come with 32 MB of memory soldered onboard and can support a maximum of 288 MB of memory with two 128 MB DIMMs installed. The network models come with 64 MB of memory soldered onboard and can support a maximum of 320 MB of memory with two 128 MB DIMMs installed. A 20+ GB hard disk with adapter feature is available.
Flash memory up to 32 MB is supported using the flash memory cards. Flash memory cards can be installed in either flash memory slot, but the controller supports only one flash memory card.
- Printer System Attachment Interfaces
The base models come with an IEEE 1284 Parallel interface with a type B connector and a Universal Serial Bus (USB) interface as standard.
The network models come with a USB interface, and a 10/100BaseTX Fast Ethernet interface as standard. It does not have a Parallel interface. The standard Fast Ethernet interface does not take up the network adapter slot. Wireless Ethernet is supported through the wired Ethernet port on either the base model with the Ethernet option installed or the network models.
Usage Rates
The maximum monthly usage is 175,000 impressions. IBM does not recommend printing to the monthly maximum on a consistent basis.
Print Quality
The resolutions of the Infoprint 1332 are:
- 1200 x 1200 dpi
- 1200 Image Quality
- 600 x 600 dpi
- 300 x 300 dpi
The Toner Darkness setting offers 10 user-selectable settings to balance print darkness and toner savings. The higher the setting, the darker the print. Within the range of print darkness settings, up to 50% toner savings can be realized. The factory default setting is 8.
Font Support
The Infoprint 1332 printers' resident fonts include support for following:
Emulation Number of Scalable Fonts Number of Bitmapped Fonts
------------ ------------------------ -------------------------
PCL 6 89 2
PostScript 3 158 0
PPDS 39 5
?
Media Handling Features
The Infoprint 1332 supports the following media handling options:
- 250-Sheet Drawer
- 500-Sheet Drawer
- 2000-Sheet Drawer
- 250-Sheet Tray
- 500-Sheet Tray
- 250-Sheet Duplex Unit (Infoprint 1332 only)
- Envelope Feeder
- Output Expander
- High Capacity Output Stacker
- StapleSmart Finisher
- 250-sheet Universally Adjustable Tray or Drawer (UAT)
- 400-sheet Universally Adjustable Tray or Drawer (UAT)
Accessibility by People with Disabilities
For Hardware Offerings
The following features support use by people with disabilities:
- Controls and latches are operable with one hand and minimal dexterity.
- Keys are discernible by touch without activating them.
- The display, controls, latches, and levers are accessible to someone in a wheel chair.
- Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.
| Models |
Model Summary Matrix
Model Type Voltage Special
----- ------- ------- ----------
001 Base Low -
N01 Network Low -
004 Base Low Government
N04 Network Low Government
005 Base High Government
N05 Network High Government
Customer Setup (CSU)
Yes.
Devices Supported
Hardware Options
Mach Feature Part
Type Model Number Number Description UPC
---- ----- ------- ------- ------------------------------ ---------------
53P7947 250-Sheet Duplex Unit 0-87944-85139-4
53P7946 500-Sheet Duplex Unit 0-87944-85138-7
53P7949 250-Sheet Duplex Unit(Gov Kit) 0-87944-85255-1
53P7948 500-Sheet Duplex Unit(Gov Kit) 0-87944-85254-4
28P1979 250-Sheet Tray 0-87944-67818-2
28P1980 500-Sheet Tray 0-87944-67819-9
28P1983 250-Sheet Drawer 0-87944-67816-8
28P1984 500-Sheet Drawer 0-87944-67817-5
28P1988 2000-Sheet Drawer (Letter) 0-87944-67820-5
28P1989 2000-Sheet Drawer (A4) 0-87944-67821-2
28P1987 Envelope Feeder 0-87944-67823-6
28P1990 Output Expander 0-87944-67824-3
28P1994 5-Bin Mailbox 0-87944-67825-0
28P1993 High Capacity Output Stacker 0-87944-67826-7
28P1991 StapleSmart Finisher 0-87944-67827-4
28P1981 250-Sheet Universal Tray 0-87944-67830-4
28P1982 400-Sheet Universal Tray 0-87944-67828-1
28P1985 250-Sheet Universal Adj. Drawer0-87944-67831-1
28P1986 400-Sheet Universal Adj. Drawer0-87944-67829-8
53P7601 8 MB Memory DIMM 0-87944-82183-0
53P7602 16 MB Memory DIMM 0-87944-82230-1
53P7603 32 MB Memory DIMM 0-87944-81970-7
53P7604 64 MB Memory DIMM 0-87944-81971-4
53P7605 128 MB Memory DIMM 0-87944-81972-1
28P1862 Optra Forms**Software 0-87944-67844-1
28P1863 Optra Forms**Director Software 0-87944-67845-8
53P9307 Optra Forms**Manager 0-87944-72539-8
28P1869 Optra Forms**2-Key Security 0-87944-67850-2
28P1870 Optra Forms**3-Key Security 0-87944-67851-9
28P1842 Coax/Twinax Adapter for SCS 0-87944-73644-8
28P1836 Token-Ring-3 Port 0-87944-67906-6
28P1839 Ethernet 10/100BaseTX-1 Port 0-87944-67903-5
28P1840 Ethernet 10/100BaseTX-3 Port 0-87944-67905-9
28P1841 Ethernet 10/100TX/10Base2-1 Pt 0-87944-67904-2
53P7854 802.11b Wireless Adapter 0-87944-83617-9
28P1845 External Serial Adapter 0-87944-67911-0
28P1871 10 ft. Parallel Cable 0-87944-67916-5
28P1872 20 ft. Parallel Cable 0-87944-67917-2
28P1874 50 ft. Serial Cable 0-87944-67919-6
28P1875 2-meter USB Cable 0-87944-67918-9
53P7950 Printer Stand with Cabinet 0-87944-85382-4
53P7951 Printer Stand 0-87944-85383-1
53P7952 Low-Profile Printer Stand 0-87944-85384-8
53P7953 Scanner Stand with Cabinet 0-87944-85385-5
Performance Specifications
The Infoprint 1332 maximum print speeds are shown in the following table. Actual performance depends on:
- Interface to the host (serial, parallel, network)
- Host system and application
- Network complexity and traffic
- Page complexity and content
- Certain printer options installed and selected
- Printer memory
- Printer resolution
- Media size, media type setting and tray source
Continuous Print Speeds in pages-per-minute (ppm) are shown in the following table:
Infoprint 1332
300, 600,
Media 1200IQ 1200
-------- ---------- ---------
Simplex
- Letter 35.1 ppm 18.0 ppm
- A4 33.2 ppm 17.1 ppm
- Legal 28.0 ppm 14.6 ppm
Duplex
- Letter 30.6 spm 16.9 spm
- A4 29.2 spm 16.1 spm
- Legal 22.6 spm 14.4 spm
Time to First Print values are shown in the following table:
Time from Time from
Input Source Standby Mode Power Saver Mode
-------------- ------------ ----------------
Infoprint 1332
Tray 1 <8.5 sec. <50 sec.
Note: Time to first print is defined as the elapsed time when the print engine receives the Start Command from the printer controller to when the trailing edge of the first sheet exits the printer's exit feed rollers into the output bin. All measurements are with letter size paper, long-edge-feed and standby mode.
Print Area
The Infoprint 1332 printable area is limited to within 4.2 mm (0.167 in.) of top, bottom, left or right edges of the media. Any information placed outside this specified printable area will not print.
Print Quality
General Statement on Print Quality
During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure high quality printing and good performance throughout the life of the printer.
Data Streams
The Infoprint 1332 supports the following data streams:
- PostScript Level 3 Emulation
- PCL 6 Emulation
- PPDS (Page Printer Data Stream) Migration Tool
Fonts
Fonts and Symbol Sets
The fonts in PCL emulation are compatible with the fonts in the HP4500 and include nine additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with all 136 fonts in Adobe PostScript 3 and include 22 additional fonts.
Additional fonts can be downloaded to the printer RAM or optional Flash memory. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts. Font cards and font cartridges are not supported.
Media Support
Infoprint 1332
All models come standard with one 250-sheet paper drawer and a 100-sheet auxiliary tray. One 250-sheet output bin is standard. See tables below for standard and maximum media capacities.
Input Media Combinations and Capacities (sheets)
Standard Optional Optional Optional Optional Total
Aux. Tray Drawer 1 Drawer 2 Drawer 3 Drawer 4 Drawer 5 Capacity
--------- -------- -------- -------- -------- -------- --------
Standard 100 250 350
Maximum 100 250 500 500 500 2000 3850
Output Media Capacities (sheets)
Optional Optional Optional
Standard Output 5-Bin Optional High-cap Total
Output Bin Expander Mailbox Finisher Stacker Capacity
---------- -------- -------- -------- -------- --------
Standard 250 250
Maximum with 250 3x650 2200
Expander(1)
Maximum with 250 650 750 1650
Finisher(2)
Maximum with 250 650 1850 2750
High-cap stacker(3)
Note: (1) Maximum of three Output Expanders can be installed.
Note: (2) Maximum of one Staplesmart Finisher and one Output Expander can be installed. The Staplesmart Finisher and High-Capacity Output Stacker are mutually exclusive.
Note: (3) Maximum of one High-Capacity Output Stacker and one Output Expander can be installed.
Media Sizes Supported
Media Capacity for Infoprint 1332
Stack
Source Media Height Reference Capacity
---------------------- --------------- ------ --------------------
Inputs
- 250-Sheet Tray(2)
Plain Paper(1) 25 mm 250 sheets (75 gsm)
Transparencies 225 transparencies
Paper labels 100 paper labels(3)
- 500-Sheet Tray(2)
Plain Paper(1) 55 mm 500 sheets (75 gsm)
Transparencies 450 transparencies
Paper labels 200 paper labels(3)
- 2000-Sheet Tray(2)
Plain Paper(1) 212 mm 2000 sheets (75 gsm)
Transparencies NA NA
Paper labels NA NA
- Envelope Feeder(2)
Envelopes 64.7mm 85 envelopes (75 gsm)
- Auxiliary Tray(2)
Plain Paper 10 mm 100 sheets (75 gsm)
Envelopes 10 envelopes (75 gsm)
Paper labels Various quantities
Outputs
- 500-sheet Output(1),(2)
Plain Paper 85 mm 500 sheets (75 gsm)
Transparencies 300 transparencies
Paper labels 200 paper labels(3)
Envelopes 50 envelopes (75 gsm)
- Output Expander(1),(2)
Plain Paper 80 mm 650 sheets (75 gsm)
Envelopes 50 envelopes (75 gsm)
(6)
- 5-Bin Mailbox(1),(2),(7)
Plain Paper 15 mm 100 sheets (75 gsm)
Envelopes NA
- High Capacity Output(1),(2)
Plain Paper 200 mm 1850 sheets (75 gsm)
Envelopes Various quantities(5)
- Staplesmart Finisher
Plain Paper 750 sheets (75 gsm)
unstapled
Note: (1) 20 lb xerographic paper at ambient environment.
Note: (2) Capacity may vary and is subject to media specs and operating environment.
Note: (3) Capacity will vary with label material and construction.
Note: (4) Capacity will vary depending on weight and type of media.
Note: (5) Stack height will not reach max. due to weight of envelopes concentrated on one side of option tray.
Note: (6) Estimate based on capacity of 500-sheet output bin.
Note: (7) Available on Infoprint 1352 only.
Input Media for Infoprint 1332
250 1 250- 400-
500- Sheet Sheet 2000-
Tray Sheet Univ. Univ. Sheet Env.
Paper Size & Type Aux. 1/2 Tray Tray Tray Drawer Feed
----------------------- ---- ---- ----- ----- ----- ------ ----
A4 (210x297 mm) Yes Yes Yes No No Yes No
Letter (8.5"x11"] Yes Yes Yes No No Yes No
A5 (148x210 mm) Yes Yes Yes No No Yes No
B5-JIS (182x257 mm) Yes Yes Yes No No Yes No
Legal (8.5"x14"] Yes Yes Yes No No Yes No
Executive (7.25"x10.5"] Yes Yes Yes@ No No Yes No
Folio (8.5"x13"] Yes Yes Yes No No No No
Statement (5.5"x8.5"] Yes Yes Yes No No No No
7 3/4 Env. (98x191 mm) Yes No No No No No Yes
9 Env. (98x225 mm) Yes No No No No No Yes
Commercial #10 Env. Yes No No No No No Yes
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No No No No No Yes
B5 Env. (176x250 mm) Yes No No No No No Yes
DL Env. (110x220 mm) Yes No No No No No Yes
Other Env.(1) Yes No No No No No Yes
Universal(2) Yes Yes Yes Yes Yes No No
Universal(3) Yes No No Yes Yes No No
Universal(4) Yes Yes Yes Yes Yes No No
Paper Yes Yes Yes Yes Yes Yes No
Transparencies Yes Yes Yes Yes Yes No No
Cardstock Yes Yes Yes Yes Yes No No
Paper Labels Yes Yes Yes Yes Yes No No
Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).
Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).
Note: (3) Size 69.85x127mm to 215.9x355.6mm (2.75x5 in. to 8.5x14 in.).
- 250-sheet Universal tray does not support index cards
- 400-sheet Universal tray supports paper no shorter than 7 in.
Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
Output Media for Infoprint 1332
Std 5-bin high- Fin. Fin.
Out. Output Mail cap. Output Staple
Paper Size & Type Dup. Bin Expand box(5) Stack Bin. Jogger
----------------------- ---- ---- ------ ----- ----- ------ ------
A4 (210x297 mm) Yes Yes Yes Yes Yes Yes Yes
Letter (8.5"x11"] Yes Yes Yes Yes Yes Yes Yes
A5 (148x210 mm) Yes Yes Yes No Yes No No
B5-JIS (182x257 mm) Yes Yes Yes Yes Yes Yes No
Legal (8.5"x14"] Yes Yes Yes Yes Yes Yes Yes
Executive (7.25"x10.5"] Yes Yes Yes Yes Yes Yes No
Folio (8.5"x13"] Yes Yes Yes Yes Yes Yes Yes
Statement (5.5"x8.5"] No Yes Yes No Yes No No
7 3/4 Env. (98x191 mm) No Yes Yes No Yes No No
9 Env. (98x225 mm) No Yes Yes No Yes No No
Commercial #10 Env. No Yes Yes No Yes No No
(104.8x241.3 mm)
C5 Env. (169x229 mm) No Yes Yes No Yes Yes No
B5 Env. (176x250 mm) No Yes Yes No Yes Yes No
DL Env. (110x220 mm) No Yes Yes No Yes No No
Other Env.(1) No Yes Yes No Yes No No
Universal(2) No Yes Yes No Yes No No
Universal(3) No Yes Yes No Yes No No
Universal(4) Yes Yes Yes No Yes No No
Paper Yes Yes Yes Yes Yes Yes Yes
Cardstock Yes Yes Yes No Yes Yes Yes@
Transparencies No Yes Yes No Yes Yes Yes@
Paper Labels No Yes Yes No Yes No No
Note: @ Supported by offsetting only, not stapler function.
Note: Dup = Duplex.
Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).
Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).
Note: (3) Size 69.85x127mm to 215.9x355.6mm (2.75x5 in. to 8.5x14 in.).
Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
Media Type and Weights Supported
Input Media for Infoprint 1332
Aux & 250-Sht 500-Sheet tray
Print Media (5) (6) 2000-Sht Drwr Env. Feeder
------------------ ------------- -------------- ------------- -----------
Copier/Xerographic 60-135 gsm 60-176 gsm 60-135 gsm No
16-36 lb 16-47 lb 16-36 lb
Card Stock Upper
Limit grain Long(1)
- Index-Bristol 120 gsm (67lb) 163 gsm (90lb) No No
- Tag 120 gsm (74lb) 163 gsm (100lb) No No
- Cover 135 gsm (50lb) 176 gsm (65lb) No No
Card Stock Upper
Limit grain Short(1)
- Index-Bristol 163 gsm (90lb) 199 gsm (110lb) No No
- Tag 163 gsm (125lb)203 gsm (125lb) No No
- Cover 176 gsm (65lb) 216 gsm (80lb) No No
Transparencies 138-146 gsm 138-146 gsm No No
37-39 lb 37-39 lb No No
Labels Upper Limit
- Paper 163 gsm (43lb) 180 gsm (48lb) No No
Integrated Forms
- Pressure Area(2) 140-175 gsm 140-175 gsm No No
- Paper Base 75-135 gsm 75-135 gsm No No
20-36 lb 20-36 lb
Envelopes(5) 60-105 gsm No No 60-105 gsm
(Sulfite, wood-free 16-28lb bond(3) 16-28 lb(4)
or up to 100%
cotton bond)
Note: All media specified in lb is bond.
Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.
Note: (2) Pressure sensitive area must enter the printer first.
Note: (3) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond envelopes are limited to 25% cotton content. This spec applies to the auxiliary tray, not the optional 250-sheet drawer.
Note: (4) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond. bond envelopes are limited to 25% cotton content.
Note: (5) The duplex option supports the same weights and types as the printer except for transparencies, envelopes, and labels. Integrated trays include the standard 500 tray and the 400-UAT tray in the integrated tray position.
Note: (6) Optional 250-drawers include the 250-UAT drawer. Optional 500-drawers include the 400-UAT drawer.
Output Media for Infoprint 1332
Print Media Std/Expd/Stak Finisher Bin Fin stple/Off Mailbox(5)
------------------ ------------- -------------- ------------- -----------
Copier/Xerographic 60-176 gsm 60-176 gsm 60-90 gsm 60-90 gsm
grain long, 16-47 lb 16-24 lb 16-24 lb
16-47 lb
Card Stock Upper
Limit grain Long(1)
- Index-Bristol 163 gsm (90lb) 163 gsm (90lb) No No
- Tag 163 gsm(100lb) 163 gsm (100lb) No No
- Cover 176 gsm (65lb) No No No
Card Stock Upper
Limit grain Short(1)
- Index-Bristol 199 gsm (110lb)199 gsm (110lb) No No
- Tag 203 gsm (125lb)203 gsm (125lb) No No
- Cover 216 gsm (80lb) 216 gsm (80lb) No No
Transparencies 138-146 gsm 138-146 gsm Offsetting No
37-39 lb 37-39 lb 138-146 gsm No
37-39 lb
Labels Upper Limit
- Paper 180 gsm (48 lb) No No No
Integrated Forms
- Pressure Area(2) 140-175 gsm No No No
up to 47 lb
- Paper Base 75-135 gsm No No No
(long grain) 20-36 lb
Envelopes 60-105 gsm No No No
(Sulfite, wood-free 16-28 lb bond(3)(4)
or up to 100%
cotton bond)
Note: All media specified in lb is bond.
Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.
Note: (2) Pressure sensitive area must enter the printer first.
Note: (3) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond envelopes are limited to 25% cotton content. This spec applies to the auxiliary tray, not the optional 250-sheet drawer.
Note: (4) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond envelopes are limited to 25% cotton content.
Note: (5) Not supported on Infoprint 1332.
Paper Sensing for Infoprint 1332
Standard Optional Optional Optional
Input 250/500 2000-Sht. Envelope
Sensing Function Trays Drawers Drawer Feeder
--------------------------- --------- -------- --------- --------
Paper Size Sensing
Paper Tray Yes Yes Yes No
Auxiliary Tray No No No No
Paper Out Sensing
Paper Tray Yes Yes Yes Yes
Auxiliary Tray Yes No No No
Tray Present Sensing
Paper Tray Yes Yes Yes No
Auxiliary Tray No No No No
Envelope Conditioning Yes No No No
Misc. Other
Narrow Media Yes No No No
Auto Size Yes No No No
Tray Low Yes Yes No No
Pass Through No Yes Yes Yes
Cover Open/
Cartridge Present Yes No No No
Input Sensor Yes No No No
Fuser Exit Yes No No No
?
Optional Optional Optional
Output 5 -Bin High-Cap. Optional
Sensing Function Expander Mailbox Stacker Finisher
--------------------------- --------- -------- --------- --------
Output Bin Near Full Yes No Yes Yes
Output Bin Full Yes Yes Yes Yes
Output Bin Empty No Yes No Yes
Envelope Conditioning
Misc. Other
Pass Through Yes Yes Yes Yes
Stapling Sensing
Paper In Stapler No No No Yes
Stapler Low No No No Yes
Staple Cartridge Present No No No Yes
Stapler Empty No No No Yes
Stapler Top Cover No No No Yes
Stapler Access Door No No No Yes
?
Additional Media Guidelines for Infoprint 1332
Follow the media guidelines below for successful printing:
Paper
- Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
- Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.
- Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with these printers.
- Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.
- Recycled paper less than 80g/sqm may cause unacceptable results.
Envelopes
- All envelopes should be new, unused, and without package damage.
- Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
- Minimum weight: 75 g/m2 (20 lb.)
- The following envelopes should not be used:
- Envelopes with windows, holes, perforations, cutouts, or deep embossing.
- Envelopes with metal clasps, string ties, or metal folding bars.
- Envelopes with exposed flap adhesive when the flap is in the closed position.
- For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
- Under high humidity conditions (over 60%), envelopes may seal during printing.
Transparencies
- Use letter or A4-size sheets only.
- Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint 1332.
Labels
Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability. VINYL AND POLYESTER LABELS ARE NOT SUPPORTED.
Differences Between These Printer's IPDS and Previous IBM Printers
These workgroup printers have a different level IPDS support than the previous IBM workgroup printers. Some key differences are:
- For emulation, the Infoprint 1000 Series printers emulate the 4028, 4312, 4317, 4324, 3812/16, and 3112/16. These are LF1 emulations ONLY.
- Infoprint 1332 printers do not support "Manage IPDS Dialog".
Details on Card for IPDS and SCS/TNe Emulation
Product Overview:
- The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident web server, a browser and the printer's IP address.
- For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.
These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM iSeries applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).
IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:
- PDF417 2D bar code, Data Matrix, MaxiCode 2D bar code support
- Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.
- Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
- No changes to host applications.
- Supports emulation of common IBM IPDS and SCS printers.
- Additional or new remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.
- One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or iSeries documents (AFP/IPDS, SCS).
With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an iSeries or System/390 computer.
With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or iSeries host printer. See the compatibility section for details.
With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an iSeries or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the compatibility section for more details.
For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.
The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.
The IPDS emulation supports the IPDS data and resource towers. SBCS fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.
The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.
Fonts
AFP/IPDS Font and Typestyle Support:
The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).
The following languages are supported:
- Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English
- Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian
- Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian
- Greek
- Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.
The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.
The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.
The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.
The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.
Font Capture
Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.
PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.
Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.
If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.
The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.
iSeries
On the iSeries, Font capture is supported by OS/400 V5R1 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG/CHGPSFCFG), set FNTCAPTURE (*YES).
Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Verify that *YES is specified for the Font Capture attribute. Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.
For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.
Mainframe (OS/390 or z/OS)
Font capture is supported by PSF for OS/390 or z/OS. Use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.
SCS Font and Typestyle Support
The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.
On the iSeries, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.
A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.
These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).
Compatibility
For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.
Support Notes:
- Microcode updates and User's Guides are available from the IBM web site.
- See the appropriate User's Guide for configuration instructions.
- When the printer is emulating an IBM printer, the function supported depends on the IBM host software.
For Direct Network Attachment - Hardware Compatibility
When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:
- Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
- MarkNet(tm) N2000 Series print servers
- MarkNet X2000 Series print servers (AFP/IPDS only)
- MarkNet Pro print servers (AFP/IPDS only)
The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.
Notes:
- MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.
- For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.
- Any MarkNet X2000 microcode level provides AFP/IPDS support only.
- For IPDS printing, a minimum of 16MB of printer memory is required.
Software Compatibility for AFP/IPDS Printing Over TCP/IP
The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:
- OS/400 V5R1 or later through PSF/400 (See Note).
Note: With OS/400 V5R1, to print IPDS over TCP/IP through PSF/400.
Software Compatibility for SCS LU1 Printing Over TCP/IP
The IBM iSeries software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:
- OS/400 V5R1 or later with all PTFs applied
Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same.
The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:
- IBM Communications Server (CS) for OS/390 or z/OS Version 2 Release 5 or later on ESA systems (Note: All appropriate APARs must be applied)
- TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)
- TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature
- Using Cisco 7500 Series Routers
SCS LU1 Printing Using a Gateway and TCP/IP
If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or iSeries. Examples of these gateways are:
- IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp
- Microsoft NetResults SNA Server 4.0
- Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server
- Attachmate E-Vantage SNA Gateway 2.0
- Barr Systems Communications Server
- Cisco TN3270 Server
- OpenConnect using the WebConnect SNA Access Server or SNA Print Server
Printer Stand Recommendations
- To minimize the possibility of tipping when the printer is configured with three or more paper drawers, the use of a printer stand is recommended.
- Under no circumstances should the bottom of the base printer or the bottom of the duplex unit, if installed, be higher than 38.1 mm (1.5 in.) above the printer stand side shelves.
The following table shows the recommended limit for input and output options to use with each respective printer stand.
Maximum Recommended Configurations
Low Profile Printer Stand
Stand with Cabinet Printer Stand
--------------- --------------- --------------- -------------
Input Options: Any 4 250/500 Any 4 250/500 Any 4 250/500
sheet drawers sheet drawers sheet drawers
OR OR OR
2000-sheet drwr 2000-sheet drwr 2000-sheet drwr
plus 1 250/500 plus 1 250/500 plus 3 250/500
sheet drawers sheet drawers sheet drawers
Output Options: Full Support Full Support Full Support
?
Printer Stand Dimensions
Width Depth Height Weight(1)
------------ ------------ ------------ ------------
Low Profile Stand 772mm(30.4"] 594mm(23.2"] 584mm(23.0"] 24.6Kg(54lb)
Printer Stand 772mm(30.4"] 594mm(23.2"] 808mm(31.8"] 34.1Kg(75lb)
with Cabinet
Printer Stand 772mm(30.4"] 594mm(23.2"] 808mm(31.8"] 30.9Kg(68lb)
?
MarkNet** Compatibility
The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:
- TCP/IP
- Novell (IPX/SPX including NetWare Directory Services)
- AppleTalk**
- LexLink** (DLC/LLC)
The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:
- IPP: Internet Printing Protocol
- SLP: Service Location Protocol
- NTP: Network Timing Protocol
The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.
The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.
IBM Host Connection Features
iSeries (formerly AS/400)
IBM iSeries with OS/400 V5R1 or later utilizing OS/400 Host Print Transform. Use Manufacturer Type and Model (MFRTYPMDL) of LEXOPTRAT** (in OS/400 Version 4 Release 2 or later), LEXOPTRAS**, or LEXOPTRA**.
Certifications
Infoprint 1332 complies with the global safety standard for Information Technology Equipment, i.e. IEC 60950, and its country equivalents in the markets we serve. The following sections highlight the approvals and certifications that Infoprint 1332 is expected to receive.
110V Version
- Underwriters Laboratories, Inc. UL 60650, Third Edition, Information Technology Equipment
- U.S. FDA, CDRH registration per 21 CFR Chapter I, Subchapter J, Section 1040
- Energy Star compliant
- Canadian Standards Association CAN/CSA-C22.2 No. 950-95, Third Edition, Information Technology Equipment
- FCC Class B per FCC Rules, Parts 2 and 15 - all geographies
- Industry Canada (EMC) Compliance Statement
- IEC 320, International Standard Electrical Appliance Connectors
- BSMI (Taiwan) Class B
230V Version
- IEC 60825-1, International Standard Safety of Laser Products
- CB Certificate and Test report to include the country differences of all participating CB Scheme members as listed at:
- www.cbscheme.com
With the exception of Canada (CA), Japan (JP), and U.S.A. (US). CB assessment shall be to IEC 60950 2nd ED. + A1+A2+A3+A4
- TUV "GS"
- SEMKO "S" mark
- CE mark Class B
- Argentina "S" Mark from UL
Software
MarkVision Professional and printer drivers are provided on the Drivers, MarkVision, and Utilities CD that is packaged with the printer. See Publications section for details. MarkVision Professional for Sun Solaris, SuSE Linux, Red Hat Linux, HP-UX and IBM AIX operating systems are available from the IBM Web site.
The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.
Operating Systems
Infoprint 1332 is compatible with applications running under the following operating systems for either local or network connections: For information about USB connections, see Local Connections.
Apple Macintosh
- Apple MacOS 8.6 or later
Microsoft Windows
- Microsoft Windows 95 4.00.950 or later
- Microsoft Windows 98, 2nd Edition
- Windows Me
- Microsoft Windows NT 4.00
- Microsoft Windows NT 4.00 Server
- Microsoft Windows 2000 Professional
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows XP
- Microsoft Windows Server 2003
Note: Download the latest printer drivers from the IBM Web site.
Novell
- Novell NetWare** 3.x, 4.x, 5.x including full DNS and NDPS support
- Novel** Distributed Print ServicesTM (NDPSTM) 2.0 or later with IBM NDPS IP Gateway.
- Novel NetWare Enterprise Print Services (NES) with IBM NDPS IP Gateway.
Note: Download the NDPS IP Gateway from the IBM Web site.
Linux
- Caldera eDesktop 2.4
- Red Hat Linux 7.1, 7.2, 7.3
- SuSE Linux 7.2, 7.3, 8.0
- TurboLinux Workstation 6.0, 6.1
Note: Download the Enhanced Printer Drivers from the IBM Web site.
UNIX
- Compaq Tru64 (Digital) UNIX 4.0D
- HP-UX 10.x, 11.x
- IBM AIX 4.3.3, 5.1
- SCO OpenServer 5.0.4 or higher
- SGI IRIX 6.5x
- Sun Solaris x86 2.6, 7, 8
- Sun Solaris 2.6, 7, 8, 9
- UnixWare 2.1.3, 7.1
Note: Download the Enhanced Printer Drivers from the IBM Web site.
Other
- Virtually any platform supporting TCP/IP
- IBM iSeries Systems with TCP/IP with OS/400(r) V5R1 or later using OS/400 Host Print Transform.
The software applications that operate with most Apple LaserWriter printers will generally operate with the Infoprint 1332. The Macintosh 128, 512, and 512e Computers are not supported.
Management Solutions (MarkVision**)
MarkVision Professional, MarkVision Messenger, NetPnP and Software Installation and Distribution tools are provided on Drivers, MarkVision and Utilities CDs.
MarkVision Professional
MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a Web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.
MarkVision Messenger
MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.
NetPnP (provided on CD)
NetPnP senses when a new IBM printer is attached to the network and automatically creates a shared printer object on the Windows NT 4.0 or Windows 2000 system. Furthermore, NetPnP notifies end-users via e-mail that the new network printer is available for printing. Designed for Windows NT 4.0 and Windows 2000 environments, Net PnP makes the Infoprint 1332 printers available to end-users within seconds of network attachment.
Software Installation and Distribution tools (provided on CD)
In Windows NT 4.0 and Windows 2000 environments, these tools enable administrators to push printer software installation to other Windows NT 4.0 or Windows 2000 workstations or to write a script that will install specified printer software on specified Windows NT 4.0 or Windows 2000 workstations on the network. In Windows 9X environments, it enables administrators to write installation scripts that can then be distributed to other workstations. When executed, these scripts will silently install all specified IBM software.
Solaris Ready for Sun customers
These printers are certified Solaris Ready by Sun and include Infoprint 1332 Enhanced Printer Drivers for Sun Systems and Sun specific documentation seamless installation and use in Sun Solaris environments. The IBM network printers are Ethernet-ready for use in Sun networks.
The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances. MarkVision Professional is available from the IBM Web site.
IBM Infoprint Manager
Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.
Network Printer Resource Utility (NPRU)
NPRU will not support the Infoprint 1332.
TCP/IP Network Port Monitor Utility
This utility will not support the Infoprint 1332.
LPR Remote Printing Client Utility
This utility will not support the Infoprint 1332.
802.11g Wireless to Ethernet
Specifications
Model ACR-201-G
Standard IEEE 802.11g, 802.11g WPA-TKIP, WPA-PSK
Host Interface Ethernet, 802.3, RJ-45 receptacle
Frequency 2.4835 GHz (US and Europe)
RF Channels 11 channels (US, Canada)
13 channels (Europe, except France)
4 channels (France)
Transmission power 14 dBm at antenna input typical for 802.11g
16.2 dBm at antenna input typical for 802.11b
Receiver sensitivity -65dBm @ 54Mbps, -80sBm @11Mbps at 1e-5 BER
Typical
Antenna Dipole antenna with ~2dBi gain
Data Rate 1/ 2/ 5.5/ 6/ 9/ 11/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Modulation OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) DBPSK,
DQPSK, CCK (11b)
Link Distance ~1200 ft in open space
Network Types Support both the ad hoc mode and the
infrastructure mode
Data Encryption Support WPA-TKIP, WPA-PSK and 128/64-bit WEP
LED Indicators 4: Power, Transmission, Receiving,
Link/Ethernet-connection
Network Protocol TCP/IP, IPX/SPX, AppleTalk
Support
?
Printer Management Utilities
MarkVision Professional (provided on the printer CDs)
MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser. It provides IT administrators with real time device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.
The 802.11g Wireless to Ethernet acts as a wireless Ethernet bridge. When used with a Lexmark printer that supports MarkVision Professional management capabilities, the wireless bridge provides the same level of functionality as if the printer were connected to the network via a wired connection.
MFP Information / Compatibility
When used with a network-capable MFP, the 802.11g Wireless to Ethernet provides network capabilities equivalent to a MFP connected to a wired 10/100BaseTX Ethernet network.
Network Security
The 802.11g wireless to Ethernet supports the following wireless security methods and protocols:
- WPA-Personal-level security:
- TKIP
- Pre-Shared Key (PSK)
- WEP:
- 64-bit
- 128-bit
These security modes cannot be used in combination. For example, if a user selects WPA-personal, the user cannot enable WEP security features.
In addition to the wireless security methods, the 802.11g Wireless to Ethernet included with the printer or MFP provides the following access control methods that an be used in conjunction with any wireless security methods stated above:
- Device configuration password protection
- Restricted Server List
Operating System Support
- Workstation Operating Systems:
- Apple Mac OS 8.6-9.x (LPR printing)
- Apple Mac OS X.2 and above (Zero Configuration support)
- Windows 98SE, Me
- Windows NT 4.0(1)
- Windows 2000
- Windows XP
- Red Hat Linux 7.3, 8.0, 9.0(1)
- SuSE Linux 8.0, 8.1, 8.2(1)
- Server Operating Systems:
- Apple Mac OS X.2 Server and above
- Windows NT 4.0 Server(1)
- Windows 2000 Terminal Server
- Windows 2000 Server, Advanced Server
- Windows Server 2003
- IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(1)
- Virtually any platform supporting TCP/IP(1)
- Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
- Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(1)
- Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(1)
- Red Hat Linux 7.3, 8.0, 9.0(1)
- SuSE Linux 8.0, 8.1, 8.2(1)
Note: (1) May require initial configuration through Ad-hoc mode.
Printing Protocols
The 802.11g Wireless to Ethernet feature is compatible with all network protocols supported by the printer.
802.11g Wireless to USB
Network Security
The 802.11g wireless to USB supports the following wireless security methods and protocols:
- WPA-Personal:
- TKIP
- Pre-Shared Key (PSK)
- WEP:
- 64-bit
- 128-bit
These security modes cannot be used in combination. For example, if a user selects WEP, the WPA-Personal cannot be enabled. In addition to the wireless security methods, the print server provides the following access control methods:
- Device configuration password protection
- Restricted Server List
Operating System Support
- Workstation Operating Systems:
- Apple Mac OS 8.6, 9.x (LPR printing)
- Apple Mac OS X 10.2 and above (Zero Configuration support)
- Windows 98SE, Me
- Windows NT 4.0(2)
- Windows 2000
- Windows XP
- Red Hat Linux 7.3, 8.0, 9.0(2)
- SuSE Linux 8.0, 8.1, 8.2(2)
- Server Operating Systems:
- Apple Mac OS X.2 Server and above
- Windows NT 4.0 Server(2)
- Windows 2000 Terminal Server
- Windows 2000 Server, Advanced Server
- Windows Server 2003
- IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(2)
- Virtually any platform supporting TCP/IP(2)
- Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
- Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(2)
- Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(2)
- Red Hat Linux 7.3, 8.0, 9.0(2)
- SuSE Linux 8.0, 8.1, 8.2(2)
Note: (2) May require initial configuration through Ad-hoc mode.
Printing Protocols
The following print protocols are supported:
- Direct IP (TCP 9100)
- LPR/LPD (TCP 515)
- IPP (Internet Printing Protocol) (TCP 631 or TCP 80)
- HBN (Host Based Networking)
Address Management Protocols
The following address management protocols are supported:
- Auto-IP
- DHCP
- DDNS
- mDNS
- ARP
- WINS
Device Management Protocols
The following device management protocols are supported:
- Zero Configuration
- HTTP
- ICMP
- SNMP
- HCP Host Configuration Protocol
- Telnet 9000
File Transfer Protocols
The following file transfer protocols are supported:
- FTP (printing, UCF file configuration)
- TFTP (printing, code updating)
IPDS is not supported through the USB port.
Network Management
These features provide management capabilities primarily via its embedded web server. Basic network management is also provided using traditional TCP/IP functions.
Basic Management
The following basic management applications are supported:
- Ping
- Finger
- Telnet 9000
- Discovery Utility
Advanced Management
These features are designed to allow the user to learn network status and configure network settings remotely. The printer server support
- the following management methods:
- Embedded Web Server
- SNMP
- Universal Configuration Files (UCF)
Embedded Web Server Function
Supported Web Browsers
- Microsoft Internet Explorer 5.0, 6.0 and newer
- Netscape 4.0, 7.0 and newer
- Safari 1.0 and newer
Primary Web Server Functions
The following items are available regardless of the status of the USB-attached device:
- Name and picture of print server
- Wireless status (connect speed, signal strength, Access Point)
- Print Server Setup Page
- Configuration of all general adapter settings (LAA, Contact Name, Locations, Etc.)
- Configuration of all TCP/IP settings
- Configuration of password
- Links and Index section
- Link to Troubleshooting
- Applet to flash update
Certifications
802.11g wireless to Ethernet
These features meet the following standards and has obtained the appropriate approvals.
- UL 60950-1: Safety of Information Technology Equipment
- Code of Federal Regulations 47, FCC Part 15 (Class B)
- FCC Part 15 Subpart C Section 15.247
- FCC Declaration of Conformity (DoC) Mark on the label
- Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
- Industry Canada RSS-210
- UL 60950 3rd Edition
802.11g wireless to USB
These features meet the following standards and has obtained the appropriate approvals.
- Code of Federal Regulations 47, FCC Part 15 (Class B)
- FCC Part 15 Subpart C Section 15.247
- FCC Declaration of Conformity (DoC) Mark on the label
- Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
- Industry Canada RSS-210
- Underwriters Laboratories, Inc., UL 60950-1
Physical Specifications
Dimensions
Infoprint 1332
Width Depth Height Weight(1)
--------- --------- --------- ---------
Base 421.0 mm 498.0 mm 345.0 mm 17.0 kg
Model (16.6 in) (19.6 in) (13.6 in) (38.0 lb)
Note: (1) Weights for low-voltage and high-voltage models are the same.
Recommended Clearances
Infoprint 1332
Left Right Front Rear
-------- -------- -------- --------
Base 304.8 mm 304.8 mm 508.0 mm 304.8 mm
Model (12 in) (12 in) (20 in) (12 in)
Operating Environment
- Operating Environment 16C to 32C (60F to 90F)
- Relative humidity: 8% to 80%
- Altitude: 3,048 meters (10,000 feet)
- Storage and Shipping Environment: -40C to 43C (-4 to 110F)
- Relative humidity: 5% to 95% RH
- Altitude: 0.25 atmospheric pressure (equivalent to 10,300 m, 34,000 ft)
- Storage Environment: -20C to 40C (-4 to 104F)
- Relative humidity: 8% to 80% RH
Electrical Specifications
Low-Voltage Models
- 110 - 127 V ac at 50/60 Hz nominal
- 100 - 137 V ac at 50/60 Hz extreme
High-Voltage Models
- 220 - 240 V ac at 50/60 Hz nominal
- 198 - 259 V ac at 50/60 Hz extreme
Power Consumption
Infoprint 1332
Base/Network
Models
Printing States Power
------------------------------ --------------
Continuous Printing 580 watts
Standby (Power Saver Off) 95 watts
Standby (Power Saver On) 15 watts
Maximum current while printing
Low-Voltage Printer 10.5 amps
High-Voltage Printer 5.0 amps
?
Note: Using a 220 V ac to 110 V ac power converter with the low-voltage model is not recommended.
Note: All models are Energy Star compliant.
Acoustics
All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Meter Average Sound Pressure, dBa.
Infoprint 1332
1-Meter Average Declared Sound
Mode Sound Pressure Power Level
---------------- --------------- --------------
Standby 31 dBa 4.6 Bels
Simplex Printing 52 dBa 6.7 Bels
Duplex Printing 55 dBa
| Publications |
All publications are downloadable from the IBM Web site. The following publications are shipped with the products:
- Infoprint 1332 or 1352 Setup Guide
- IBM Quick Reference Guide and Sleeve
- Registration/Fulfillment Card
- Op Panel Overlays (country dependent)
Special Feature Codes -- Chargeable
Mach Feature Part
Type Model Number Number Description UPC
---- ----- ------- ------- ------------------------------ ---------------
4527 001 75P4400 Infoprint 1332 NA (LV) 0-87944-91585-0
4527 n01 75P4401 Infoprint 1332 n NA (LV) 0-87944-91586-7
4527 004 75P4724 Infoprint 1332 GOV (LV) 0-87944-95655-6
4527 n04 75P4725 Infoprint 1332 n GOV (LV) 0-87944-95656-3
4527 005 75P4726 Infoprint 1332 GOV (HV) 0-87944-95657-0
4527 n05 75P4727 Infoprint 1332 n GOV (HV) 0-87944-95658-7
75P4690 16 MB Flash Card 0-87944-94256-6
75P4691 32 MB Flash Card 0-87944-94257-3
75P4692 20+GB Hard disk with Adapter 0-87944-94258-0
75P4694 Optra Forms* 16 MB Flash Card 0-87944-94260-3
75P4693 Optra Forms* 32 MB Flash Card 0-87944-94259-7
75P4695 Optra Forms* 20+GB Hard Disk 0-87944-94521-5
75P4297 Card for IPDS & SCS/TNe 0-87944-89052-2
75P4697 ImageQuick Card 0-87944-94522-2
75P4698 Bar Code Card 0-87944-94523-9
75P4696 Token-Ring 0-87944-94264-1
75P4833 Ethernet 10/100BaseTX 0-87944-94529-1
75P4706 RS-232C Serial Interface card 0-87944-94265-8
75P4707 Parallel 1284-B Interface card 0-87944-94266-5
75P4806 Printer Base 0-87944-94267-2
75P5009 T2 Scanner Shelf 0-87944-95667-9
75P5013 Operator Panel Cover 0-87944-95714-0
75P4703 Simplified Chinese Font Card 0-87944-94261-0
75P4704 Traditional Chinese Font Card 0-87944-94262-7
75P4705 Japanese Font Card 0-87944-94263-4
ServicePacs
Machine Electronic
Type Model Description Part Number
------- ------- ------------------------------- -----------
4527 001,n01 SVCPAC PTR 2YR DEPOT EZS 9X5/ND 96P2318
4527 001,n01 SVCPAC PTR 3YR DEPOT EZS 9X5/ND 96P2319
4527 001,n01 SVCPAC PTR 1YR IOR 9X5/NXTDAY 96P2322
4527 001,n01 SVCPAC PTR 2YR IOR 9X5/NXTDAY 96P2323
4527 001,n01 SVCPAC PTR 3YR IOR 9X5/NXTDAY 96P2324
4527 001,n01 SVCPAC PTR 4YR IOR 9X5/NXTDAY 96P2325
4527 001,n01 SVCPAC PTR 5YR IOR 9X5/NXTDAY 96P2326
4527 001,n01 SVCPAC PTR 1YR IOR 24X7/SAMDAY 96P2327
4527 001,n01 SVCPAC PTR 2YR IOR 24X7/SAMDAY 96P2328
4527 001,n01 SVCPAC PTR 3YR IOR 24X7/SAMDAY 96P2329
4527 001,n01 SVCPAC PTR 4YR IOR 24X7/SAMDAY 96P2330
4527 001,n01 SVCPAC PTR 5YR IOR 24X7/SAMDAY 96P2331
Mach Feature Part
Type Model Number Number Description
---- ----- ------- ------- ------------------------------
4401 250-Sheet Duplex Unit
4501 250-Sheet Tray
4502 500-Sheet Tray
4505 250-Sheet Drawer
4506 500-Sheet Drawer
4520 2000-Sheet Drawer (Letter)
4521 2000-Sheet Drawer (A4)
4511 Envelope Feeder
4620 Output Expander
4630 High Capacity Output Stacker
4621 StapleSmart Finisher
4503 250-Sheet Universal Tray
4504 400-Sheet Universal Tray
4507 250-Sheet Universal Adjustable Drawer
4508 400-Sheet Universal Adjustable Drawer
4811 Simplified Chinese (SC) Font Card
4812 Traditional Chinese (TC) Font Card
4810 Japanese Font Card
4308 8 MB Memory DIMM
4316 16 MB Memory DIMM
4332 32 MB Memory DIMM
4364 64 MB Memory DIMM
4390 128 MB Memory DIMM
4036 16 MB Flash Card
4038 32 MB Flash Card
4329 20+GB Hard disk with Adapter
4876 Optra Forms**16 MB Flash Card
4881 Optra Forms**32 MB Flash Card
4877 Optra Forms**20+GB Hard Disk
4871 Optra Forms**Software
4872 Optra Forms**Director Software
4880 Optra Forms**Manager
4878 Optra Forms**2-Key Security
4879 Optra Forms**3-Key Security
4820 Card for IPDS & SCS/TNe
4821 ImageQuick Card
4870 Bar Code Card
4170 802.11b Wireless Adapter
4141 Twinax/Coax Adapter for SCS
4120 Token-Ring
4121 Token-Ring-3 Port
4162 Ethernet 10/100BaseTX
4163 Ethernet 10/100BaseTX-1 Port
4164 Ethernet 10/100BaseTX-3 Port
4165 Ethernet 10/100TX/10Base2-1 Pt
4132 External Serial Adapter
4138 RS-232C Serial Interface card
4139 Parallel 1284-B Interface card
4180 10 ft. Parallel Cable
4181 20 ft. Parallel Cable
4183 50 ft. Serial Cable
4184 2-meter USB Cable
4533 T Printer Stand with Cabinet
4534 T Printer Stand
4535 T Low-Profile Printer Stand
4546 Scanner Stand with Cabinet
4536 Printer Base
4547 T2 Scanner Shelf
4548 Operator Panel Cover
Printer Features
All printer features are customer installable. FC = feature code.
Input, Output and Other Media Features
The Infoprint 1332 media features include:
(#4505, P/N 28P1983) 250-Sheet Drawer
- Minimum required = 0, maximum allowed = 4
- Prerequisite = none, Co-requisite = none
This input option can be installed beneath the printer to offer an added input source which holds approximately 250 sheets of 20 lb. Paper. Multiple optional drawers are supported simultaneously.
(#4506, P/N 28P1984) 500-Sheet Drawer
- Minimum required = 0, maximum allowed = 4
- Prerequisite = none, Co-requisite = none
This optional input source installs beneath the printer, and it holds approximately 500 sheets of (20 lb.) paper. Multiple optional drawers are supported simultaneously.
(#4520, P/N 28P1988) 2,000-Sheet Drawer for Letter
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of letter (20 lb.) paper.
(#4521, P/N 28P1989) 2,000-Sheet Drawer for A4
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of A4 (20 lb.) paper.
(#4501) 250-Sheet Tray
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 250 sheets of (20 lb.) paper.
(#4502, P/N 28P1980) 500-Sheet Tray
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 500 sheets of (20 lb.) paper.
(#4401, P/N 53P7947) 250-Sheet Duplex Unit
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This option offers two-sided printing capability for the Infoprint 1332 printer.
(#4511, P/N 28P1987) Envelope Feeder
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
Although occasional envelope printing is supported through the printer's multi-purpose tray, this option is available for more frequent envelope printing. It holds up to 85 envelopes.
(#4620, P/N 28P1990) Output Expander
- Minimum required = 0, maximum allowed = 3
- Prerequisite = none, Co-requisite = none
This output option installs above the printer's primary output bin. It offers an additional output destination, which holds up to 650 sheets of 20 lb paper. Multiple output expanders are supported, as indicated in Media Support.
(#4630, P/N 28P1993) High Capacity Output Stacker
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = this feature is mutually exclusive with the StapleSmart Finisher (FC 4621)
This option is a solution for very large print jobs that need to be sent as a whole to one large bin (as opposed to splitting the large job up to separate smaller bins). The High-Capacity Output Stacker holds approximately 1850 sheets (20 lb paper). This option is designed to install directly above the printer's primary output bin. The printers support an output expander in addition to the High Capacity Output Stacker, for a total capacity of up to 3000 pages of output. When both an output expander and High Capacity Output Stacker are installed, the output expander must be installed above the High Capacity Output Stacker.
(#4621, P/N 28P1991) StapleSmart Finisher
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = this feature is mutually exclusive with the High Capacity Output Stacker (FC 4630)
This output option offers stapling, offsetting, and an additional output bin. Utilizing the same "floating" tray system as the High Capacity Output Stacker, the Finisher can support up to 750 sheets of unstapled media. For stapled media, the output bin supports up to 40 stapled sets or 600 sheets. The stapler can staple a maximum of 25 sheets per set. For additional output, one output expander OR one 5-bin mailbox can be placed on top of the Finisher. The Finisher must be the first option attached to the printer. The staple cartridge contains 3000 staples. Refill staple cartridges are available in packages of three cartridges. The StapleSmart Finisher has two handy storage compartments for storing extra staple cartridges.
(#4503, P/N 28P1981) 250-sheet Universally Adjustable Tray (UAT)
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This tray supports a range of narrow media not supported by the standard paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 250-sheet UAT is 3x5 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.
(#4504) 400-sheet Universally Adjustable Tray (UAT)
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This tray supports a range of narrow media not supported by the standard paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x5 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 500-sheet integrated tray in the appropriate base printer.
(#4507) 250-sheet Universally Adjustable Drawer
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 250-sheet UAT is 3x5 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.
(#4508) 400-sheet Universally Adjustable Drawer
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x7 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 500-sheet integrated tray in the appropriate base printer.
Memory and Flash Memory Features
The Infoprint 1332 has two slots for memory DIMMs and two slots for flash memory cards and application solution cards. Only one flash memory card is allowed.
The memory features include the following SDRAM features:
(#4308) 8 MB Memory DIMM
- Minimum required = 0, maximum allowed = 2
- Prerequisite = none, Co-requisite = none
(#4316) 16 MB Memory DIMM
- Minimum required = 0, maximum allowed = 2
- Prerequisite = none, Co-requisite = none
(#4332) 32 MB Memory DIMM
- Minimum required = 0, maximum allowed = 2
- Prerequisite = none, Co-requisite = none
(#4364) 64 MB Memory DIMM
- Minimum required = 0, maximum allowed = 2
- Prerequisite = none, Co-requisite = none
(#4390) 128 MB Memory DIMM
- Minimum required = 0, maximum allowed = 2
- Prerequisite = none, Co-requisite = none
The flash memory features include:
(#4036, P/N 75P4690) 16 MB Flash Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(#4038, P/N 75P4691) 32 MB Flash Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
If larger storage is required, an optional hard disk feature is also available. The hard disk with adapter feature is required for a hard disk support. The adapter plugs into the internal network adapter slots. Multiple hard disk features may be ordered although only one hard disk can be installed at a time.
(#4329, P/N 75P4692) 20+ GB Hard Disk with Adapter
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
Connection Features
In addition to the standard USB port for all models and standard parallel port on the non-network models, each Infoprint 1332 model has one slot for an optional hard disk, optional internal print servers, or optional local connections.
Internal Local Connection Features
The following local connection options are supported:
(#4132) External Serial Adapter
- Minimum required = 0, maximum allowed = 1
- Prerequisite = base printer model or Parallel 1284-B Interface Card (FC 4139), Co-requisite = none
This adapter is installed on the printer's parallel port and receives its power through the parallel port. It utilizes a standard 25-pin D-shell females connector and supports baud rates up to 19,200 bps for RS-232C or 38,400 bps for RS-422.
(#4139) Parallel 1284-B Interface Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = network model, Co-requisite = none
This card provides a IEEE 1284-B parallel port.
(#4138) RS-232C Serial Interface Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This card provides an RS-232C serial port.
Cable Features
(#4180) 10 Ft. Parallel Cable
- Prerequisite = none, Co-requisite = none
For parallel attachment, this cable is recommended for ten feet or less and may be ordered by the customer.
(#4181) 20 Ft. Parallel Cable
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
For parallel attachment, this cable is recommended for twenty feet or less and may be ordered by the customer.
(#4183) 50 Ft. Serial Cable
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
For serial attachment, this cable is recommended for fifty feet or less and may be ordered by the customer.
(#4184) 2-meter USB Cable
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
For USB attachment, this USB cable is recommended and may be ordered by the customer.
Network Connection Features
Network cards plug into the internal interface adapter slots (one slot for Infoprint 1332). Only one card is allowed per network protocol. That is, only one Ethernet and only one Token-Ring card. One Ethernet and one Token-Ring card are allowed. Any of the non base models have Ethernet onboard and cannot have a 10/100BaseTX card installed. These models can have the 10Base/2 card installed but it will disable the onboard Ethernet.
Network Cards for Internal Print Server Features
Infoprint 1332 network models come standard with Fast Ethernet 10/100BaseTx built-in to the controller board. Additionally, both printers support the following MarkNet** N2000 Series Internal Print Servers:
(#4120, P/N 75P4696) Token Ring attachment
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(#4162, P/N 75P4833) Ethernet 10BaseT/100BaseTX
- Minimum required = 0, maximum allowed = 1
- Prerequisite = base model, Co-requisite = none
Network Cards for External Print Servers Features
These features are external standalone boxes that connect to the printer's parallel or serial ports. Network models require the Parallel 1284-B Interface Card (FC 4139). The following features provide MarkNet X2000 Series external network connection:
(#4163) Ethernet 10BaseT/100BaseTX-1 port
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This external print server has one parallel port to connect to an Ethernet 10BaseT/100BaseTX network.
(#4165) Ethernet 10/100BaseTX/10Base2-1 port
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This external print server has one parallel port to connect to an Ethernet 10BaseT/100BaseTX or 10Base2 network.
(#4164) Ethernet 10BaseT/100BaseTX-3 port
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This external print server has two parallel ports and one serial port to connect up to three printers to an Ethernet 10BaseT/100BaseTX network.
(#4121) Token Ring-3 port
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This external print server has two parallel ports and one serial port to connect up to three printers to a Token-Ring network.
(#4170) 802.11b Wireless Adapter
- Minimum required = 0, maximum allowed = 1
- Prerequisite = network model or Ethernet feature, Co-requisite =none
This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11b wireless standard. This standard operates at speeds of up to 11 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building construction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.
The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.
(#4171) Ethernet to USB Adapter
- Minimum required: 0
- Maximum allowed: 1
- Prerequisite: USB port
- Co-requisite: None
This adapter attaches to the printer's USB port and has one 10/100BaseTX RJ-45 port for connection to the network.
Note: This features is customer installable.
MarkNet** Compatibility
The MarkNet N2000 Series also supports and works in Infoprint 1332 printers.
The MarkNet N2000 Series and MarkNet X2000 Series support Network Plug and Print 2.0 on Windows NT 4.0 and Windows 2000 systems.
The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:
- TCP/IP
- Novell (IPX/SPX including NetWare Directory Services)
- AppleTalk**
- LexLink** (DLC/LLC)
The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:
- IPP: Internet Printing Protocol
- SLP: Service Location Protocol
- NTP: Network Timing Protocol
The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.
The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.
Optra Forms Features
(#4871) Optra Forms Software Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = Optra Forms flash or Hard Disk
Optra Forms uses 'up-to-the-minute' data directly from customer applications and combines it with printer resident electronic forms with text and graphics to produce (print) completed forms such as invoices, statements, pick slips, labels, purchase orders or confirmations with bar codes or other specialized graphics on a variety of paper types. For Optra Forms:
For Optra Forms:
- No Server-based or host based merge program or software is required.
- Use with virtually any ASCII text print file from any platform, mainframe, iSeries, UNIX or workstation, over Coax, Twinax, parallel, serial or LAN (TCP/IP).
- Generally, make no changes to database applications.
- Print different forms at different locations from the same database, possibly using the same data.
- Update forms quickly and easily (globally) over the LAN
- Provides support for bar codes, color, duplex, multipage form sets and more.
- Store forms as efficient, compact forms in flash.
Optra Forms is supported by the Infoprint 1332 printer using the Optra Forms 2, 4, 8 and 16MB Flash DIMMs or Optra Forms Hard Disk.
(#4872) Optra Forms Director Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = Optra Forms Software (FC 4871), Co-requisite = none
Optra Forms Director is a Windows NT or Windows 2000 server-based program. Using additional host software (AS/400, UNIX or Mainframe), the host application sends a print spool file to a Windows NT or 2000 print queue. Optra Forms Director service automatically pareses the print spool file into single or multiple print jobs using Microsoft Visual Basic Script or JScript methods and Named Pipes.
The spool file which may contain many individual documents is customized by separating it into individual jobs or by adding data or particular commands to the individual documents that are then sent to IP, LPR, or Windows printer destinations. The additional data or commands may be to staple, separate documents with a cover page, copy and collate, print on both sides, offset stack, fax, or hole punch each individual job. Print jobs are customized and distributed electronically to network printers automatically without making any changes to host applications.
Optra Forms is supported on the Infoprint 1332 using a Optra Forms flash or Hard Disk. Only one Optra Forms flash DIMM is supported.
(#4880) Optra Forms Manager
- Minimum required = 0, maximum allowed = 1
- Prerequisite = Optra Forms Flash (FCs 4876, 4881) or Optra Forms Hard Disk w/Adapter (FC 4877) and Optra Forms Software (FC 4871), Co-requisite = none
Optra Forms Manager enables administrators to manage and distribute forms to multiple printers over a TCP/IP network. This includes loading new forms and updating existing forms on an Optra Forms printer over a TCP/IP network.
Optra Forms Manager lets you:
- Keep a master copy of all forms on a PC
- Update all printers at same time over TCP/IP after a printer query for its resident Styles and creation dates. Only matching Styles (flash files) with different creation dates are downloaded to the printer over TCP/IP.
- Import a printer IP address txt file (also from MarkVision** registry)
- Select the printers to which the Download or Update operations apply.
- Run the update as a batch job
- Create a log file to know successful printer updates
- Create a Style report and save it to a comma separated variable (CSV) file giving better knowledge about the forms in all the printer. The Style report includes the printer listed by their IP address or DNS name and a description, Style names and their versions and the Optra Forms Merge program version in each printer.
- Create PDF files (using Acrobat Distiller) of the data merged with forms after retrieving archive data files from the Optra Forms hard disk. The PDF file can be saved as a softcopy archive file.
Note: With an Optra Forms hard disk, create a job buffering partition or change its size. After the disk is formatted and partitioned, the Optra Forms Merge program is written to the disk.
To use Optra Forms Manager, the Optra Forms printers must be connected to a TCP/IP network. The LPR protocol is also supported to download forms.
Optra Forms Manager is now available on a separate CD for those customers who want to use this program to more effectively manage their Optra Forms printers over TCP/IP. Other third party service providers can also manage their customers forms more cost effectively.
(#4876) Optra Forms 16 MB Flash Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = Optra Forms Software
(#4881) Optra Forms 32 MB Flash Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = Optra Forms Software
(#4877) Optra Forms 20+ GB Hard Disk with Adapter
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = Optra Forms Software
(#4878) Optra Forms 2-Key Security
- Minimum required = 0, maximum allowed = 1
- Prerequisite = Serial Port & Optra Forms SW, Co-requisite = none
For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 3-key security feature (FC 4879).
(#4879) Optra Forms 3-Key Security
- Minimum required = 0, maximum allowed = 1
- Prerequisite = Serial Port & Optra Forms SW, Co-requisite = none
For added security, confidential forms printing can be restricted to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 2-key security feature (#4878).
IBM Host Connection Features
(#4141) Coax/Twinax Adapter for SCS Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The Coax/Twinax Adapter for SCS provides SCS (for Coax, DSC/DSE) data stream support with Infoprint 1332 printers for IBM mainframe and AS/400 customers who must print SCS over distributed SNA networks using a coaxial or twinaxial cable connected printer.
For Direct Twinaxial Attachment - Hardware Compatibility
When the printer contains an optional Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS (P/N 28P1842) with a twinaxial cable, the printer attaches to the following IBM hardware:
- iSeries servers and e-systems
- iSeries Twinaxial Workstation Controllers
- iSeries Advanced System/36 Twinaxial Workstation Controller
- 5494 Remote Control Unit
- 5394 Remote Control Unit
Notes:
- Coax/Twinax Adapter for SCS (P/N 28P1842) microcode level H02-8491 or later is required.
- There must be two separate twinax addresses, one for the SCS emulation using the Adapter for SCS and another for the Card's IPDS emulation. The Adapter for SCS does not require the Card for IPDS and SCS/TNe to support SCS.
- The Coax/Twinax Adapter for SCS provides SCS data stream support for a twinax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.
For Direct Coaxial Attachment - Hardware Compatibility
When the printer contains the Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:
- IBM 3174 Control Unit
- ES/9000 Work Station Subsystem Controller
- IBM 3174 compatible control units
Notes:
- Coax/Twinax Adapter for SCS microcode level H01-9072 or later is required.
- The Coax/Twinax Adapter for SCS provides SCS data stream support for a coax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.
For Direct Coaxial Attachment - Software Compatibility
The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:
- Any application or host software that generates the AFP/IPDS data stream for one of the emulated printers such as:
- PSF/VSE V2.2.1
- PSF/VM V2.1.1 (with maintenance)
- PSF for OS/390
- PSF/400
- Infoprint Manager
- GDDM V2.3 with APARs
- RSCS V3.2 or later
(#4823) Decryption Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = Infoprint 1120, 1125, 1130, 1140, 1145, 1226, 1332, 1352, 1372 printer with a standard network connection (n or dn models). Infoprint 1120 must have 32 MB of memory.
- Co-requisite = none
- Conflict = the decryption feature plugs into the firmware slot in the printer and is mutually exclusive with the application solution features including Card for IPDS and SCS/TNe (FC 4820), Bar Code (FC 4870) and ImageQuick Card (FC 4821). This feature cannot be installed on any of the "in" models.
Encryption Overview
This feature offers an encryption solution for print output on hosts such as a mainframe, UNIX server, Microsoft Windows PC or Apple workstation that connect over a TCP/IP network to the IBM workgroup printer. The decryption card is installed in the printer and decryption takes place at the printer for maximum security.
This decryption solution is based on Federal Information Processing Standard (FIPS-197) for the Advanced Encryption Standard (AES). This standard specifies Rijndael as the encryption algorithm. AES is the new encryption standard that replaces DES, the old standard. AES is a symmetric algorithm supporting key lengths of 128, 192, and 256 bits for encryption. A symmetric algorithm uses a single key for both encryption and decryption. A key length of 256 bits provides 1.1 times 10 to the power of 77 possible combinations which makes it extremely difficult for eavsdroppers to decrypt intercepted print jobs.
The decryption feature also supports sessions keys. Session keys are used during a specific host session with the printer. The key is different for every session providing maximum security. Most competitive decryption solutions don't support session keys.
Connectivity Requirements for Decryption Feature
The printer must be connected to an ethernet network using TCP/IP. This feature only work on printer models with a standard ethernet port. It will not work with any of the optional ethernet print server features. The decryption card plugs into the firmware slot in the printer and is mutually exclusive with the application solution features such as IPDS, Bar Code, and ImageQuick.
Unique TCP/IP port numbers are used for encrypted print jobs. The decryption card decrypts and prints information appropriate for the port.
This feature is supported on the following IBM drivers:
- Sun Solaris 7, 8, 9
- HP-UX 11
- IBM AIX 4.3, 5.0
- Linux (Re Hat, Caldera, SuSE, TurboLinux)
- Windows 98/Me/NT4.0/2000/XP
- Mac OS X
Font Cards
These features plug into the two flash memory/application solutions slots. These font cards are mutually exclusive.
(#4811) Simplified Chinese Font Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The feature contains Simplified Chinese fonts.
(#4812) Traditional Chinese Font Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The feature contains Traditional Chinese fonts.
(#4810) Japanese Font Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The feature contains Japanese fonts.
Applications Solution Features
These features plug into the two flash memory/application solutions slots. These three features are mutually exclusive.
(#4870) Bar Code Card Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The Bar Code Option Card enables the Infoprint 1332 laser printers to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Bar Code Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM( (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.
(#4821) ImageQuickTM Card Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The ImageQuick Option Card enables the Infoprint 1332 laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.
IBM Environment Solution Features
(#4820) Card for IPDS and SCS/TNe Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This feature is installed in the flash memory/applications solutions slots.
The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM mainframe and iSeries computers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers or over distributed SNA networks using the Coax/Twinax Adapter for SCS with a coaxial or twinaxial cable connected printer.
Detailed information on this feature is provided below. This feature is installed in the optional firmware slot. It supports monochrome printing only.
IPDS is only supported for Single Byte Character Set and does not support Double Byte Character Set.
Furniture Features
(#4534) T Printer Stand Feature
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
The standard printer stand (without cabinet) is a solution for an office environment where the user desires a printer at approximately table height. It is solid grey in color.
(#4535) T Low-Profile Printer Stand Feature
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
The low-profile printer stand is targeted for an office environment where:
- The printer is usually accessed by a user who is sitting down (for example directly behind a desk), or
- Reduced access height to the printer and output options is desired, or
- It's required to meet ADA needs.
It is solid grey in color.
(#4533) T Printer Stand with Cabinet Feature
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
The standard printer stand with cabinet is targeted for an environment where:
- the user desires the printer to reside approximately at table height, or
- An increased height is desired for input option access, or
- A storage bin is desired.
It is solid grey in color.
(#4536, P/N 75P4806) Printer Base
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This base includes casters to allow the printer to be moved easily.
(#4546) Scanner Stand with Cabinet Feature
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = M22, M26 or M30 MFP Option, Co-requisite = none
This feature is solid grey in color and provides a stand for the scanner included in MFP Options. It includes a cabinet.
(#4547, P/N 75P5009) T2 Scanner Shelf
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This feature is solid grey in color and provides a stand for the scanner included in the MFP Options.
(#4548, P/N 75P5013) Operator Panel Cover
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
(P/N 75P6446) Barcode Card Feature (Infoprint 1145)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The Barcode Option Card enables the Infoprint 1145 MFP to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Barcode Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM( (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.
(P/N 75P6444) ImageQuickTM Card Feature (Infoprint 1145)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The ImageQuick Option Card enables the Infoprint 1332/1352 laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.
(P/N 75P6857) 802.11g Wireless to Ethernet
- Minimum required = 0, maximum allowed = 1,
- Prerequisite = network model or model with internal Ethernet card, Co-requisite = none
The IBM 802.11g Wireless to Ethernet allows customers to quickly place Ethernet-capable workgroup printers or multifunction priners (MFPs) on a wireless network. This wireless print adapter is a bridge that uses the existing Ethernet port of the printer or MFP, which in turn provides a wireless solution that is flexible and easy to use. It supports both 802.11b and 802.11g wireless standards. This feature includes one Ethernet (RJ-45) port for connection to the printer.
Very few steps are required to configure the 802.11g adapter. A setup utility is not needed, as the setup is done using your Windows-based browser. The 802.11g Wireless Print Adapter is also supported in a Mac OS X environment using the printer or MFP Zero Configuration networking, that allows automatic printer discovery to make it easier for users to locate devices on a network.
By using the existing Ethernet on the printer or MFP, the adapter supports all the networking capabilities the internal Ethernet card provides. This includes TCP/IP printing support (including port 9100 printing) and printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows the adapter to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.
Since the 802.11g wireless to Ethernet is transparent to MarkVision Professional, all mass management capabilities available in printers and MFPs are available to the administrator when using the 802.11g wireless to Ethernet. In addition to these capabilities, the device includes an embedded web server.
An embedded web server allows administrators to easily manage the wireless adapter through a standard web browser. While settings on the adapter are optimized for most environments, through a web browser an administrator can easily make changes to the device.
(P/N 75P6854) 802.11g Wireless to USB
- Minimum required = 0, maximum allowed = 1,
- Prerequisite = none, Co-requisite = none
The 802.11g Wireless to USB is a Wi-Fi Certified device supporting both 802.11b and 802.11g networking technologies and offers a USB 2.0 Full Speed port to connect to the printer. Its WPA personal security offers a high level of protection for value conscious consumers.
Setup is a breeze with this print server. In Microsoft Windows environments (98SE and above), it offers an intuitive setup wizard to guide the user through installation of most printers.
The 802.11g Wireless to USB also provides an easy installation for Mac OS X environments using Zero Configuration networking which allows automatic printer discovery, making it easier for users to locate devices on a network.
By offering TCP printing support (including port 9100 printing), this feature provides network printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows this feature to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.
An embedded web server allows administrators to easily manage the print server through a standard web browser. While settings on the print server are optimized for most environments, through a web browser an administrator can easily make changes to the device. Customizable settings allow the network administrator to get the most from this feature.
This feature provides a cover for the operator panel.
Trademarks
(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.? IBM Corporation 2006.