Xerox DocuPrint N4525 Parts
Please call for parts
1 2 3 4 5 6 7 | |
1 2 3 4 5 Plate, Cover 6 Stud, Docking (part of 99) 7 Bracket, Left Docking (part of 99) 8 Bracket, Rear Docking (part of 99) 9 Switch, Front Cover Interlock (part of 11) 10 Harness Assembly, Front Interlock (part of 11) (FS237 FS235/FS236) 11 (with 9~10) 12 99 (with 6~8) | |
1 2 3 4 | |
1 (with 2~19 & PL 2.2) 2 Plate, Bottom (part of 1) 3 Pad, Bottom (part of 1) 4 Plate, Tongue (part of 1) 5 Shaft Assembly, Tongue (part of 1) 6 Bearing (part of 1) 7 Guide Assembly, Side (part of 1) 8 Lever (part of 1) 9 Shaft (part of 1) 10 Spring, Compression (part of 1) 11 Plate, Side (part of 1) 12 Actuator (part of 1) 13 Link (part of 1) 14 Spring, Torsion (part of 1) 15 Stopper, Left Hand (part of 1) 16 Housing, Tray (part of 1) 17 2 Washer (part of 1) 18 Washer (part of 1) 19 Cap, Tray (part of 1) | |
1 Guide Assembly, End (part of PL 2.1, item 1) 2 Plate Assembly, End (part of PL 2.1, item 1) 3 Assembly, Actuator (part of PL 2.1, item 1) 4 2 Assembly, Cable (part of PL2.1, item 1) 5 2 Spring, Tension (part of PL 2.1, item 1) 6 2 Pulley (part of PL 2.1, item 1) 7 Actuator, Guide (part of PL 2.1, item 1) 99 | |
1 (Custom - with 2~21 & PL 2.4) 2 Plate, Bottom (part of 1) 3 Pad, Bottom (part of 1) 4 Plate, Tongue (part of 1) 5 Shaft Assembly, Tongue (part of 1) 6 Bearing (part of 1) 7 Guide Assembly, Side (Custom) (part of 1) 8 Lever (part of 1) 9 Shaft (part of 1) 10 Spring, Compression (part of 1) 11 Plate, Side (part of 1) 12 Actuator (part of 1) 13 Link (part of 1) 14 Spring, Torsion (part of 1) 15 Stopper, Left Hand (part of 1) 16 Housing, Tray (part of 1) 17 2 Washer (part of 1) 18 Washer, Side Guide (part of 1) 19 Cap, Tray (part of 1) 20 2 Roller, Tray (part of 1) 21 Spring, Tray (Custom) (part of 1) | |
1 Guide, Paper End (part of PL 2.3, item 1) 2 Label, End-Guide (part of PL 2.3, item 1) 3 Washer, Nylon (part of PL 2.3, item 1) 4 Pinslide (Custom) (part of PL 2.3, item 1) 5 Spring, Torsion (part of PL 2.3, item 1) 6 Plate Assembly, End (part of PL 2.3, item 1) 7 Guide, Actuator (part of PL 2.3, item 1) | |
1 2 3 Actuator, Sensor (part of 99) 4 Support, Actuator (part of 99) 5 (J103) - Lift Up Sensor) (J102) - No Paper Sensor 6 7 8 9 Spacer, Left 10 (Tray only) 11 809E05870 Spring, Torsion 99 (with 3~4) | |
1 Gear, 46T (part of 99) 2 Clutch Assembly (part of 99) 3 Gear, 28T (part of 99) (for Tray only) 4 Clutch, One-Way (part of 99) (for Tray only) 5 (with 6~14) 6 2 Roller Assembly (part of 5) 7 Clutch Assembly, One-Way (part of 5) 8 Clutch Gear, 25T (part of 5) 9 Bearing (part of 5) 10 Shaft, Feed (part of 5) 11 Gear, 31T (part of 5) 12 Gear, 25T (part of 5) 13 Support Assembly, Pick (part of 5) 14 Bearing (part of 5) 15 Support, Brush 16 Web, Feed 17 Brush Assembly, Feed (with items 15 & 16) 98 (with item 6, Qty. 6) 99 (with 1~4) | |
1 Retard Assembly, (with 2~8) {part of 98} 2 Spacer, Retard {part of 1} 3 Shaft Assembly, Retard (part of item 1) 4 Bearing (part of item 1) 5 Roller Assembly (part of item 1) 6 Spacer (part of item 1) 7 Clutch Assembly, Friction 8 Support, Retard (part of item 1) 9 2 Bearing {part of 98} 10 Gear, 22T {part of 98} {part of 99} 11 Spacer {part of 98} 12 Gear Stopper {part of 98} 13 Bearing, {part of 98} 14 Bearing, {part of 98} 15 Roller Assembly {part of 98} 16 Bearing {part of 98} 17 Bearing {part of 98} 18 {part of 98} 19 Chute, Feed In {part of 98} 20 Gear, 22/20T {part of 98} {part of 99} 21 {part of 98} 22 809E27440 Spring {part of 98} 23 Retard Frame {part of 98} 98 (with 1~23) 99 (with 10 & 20) | |
1 2 3 Actuator, Sensor (part of item 99) 4 Support, Actuator (part of item 99) 5 6 (for Tray 2 only) 7 40X7036 System card assembly New 40X7036 Advanced Exchange (New) This part is electronically branded upon installation, and therefore NON-RETURNABLE IF OPENED $438.42 8 9 Spacer, Left 10 11 809E05870 Spring, Torsion 99 (with 3 & 4) | |
1 Gear, 46T {part of 97} 2 Clutch Assembly {part of 97} 3 Gear, 28T (for Tray 2 only) {part of 97} 4 (for Tray 2 and High Capacity Feeder only) {part of 97} 5 (with 6-14) 6 2 Roller Assembly {part of item 5} 7 Clutch Assembly, One-Way {part of item 5} 8 Clutch Gear, 25T {part of item 5} 9 Bearing {part of item 5} 10 Shaft, Feed {part of item 5} 11 Gear, 31T {part of item 5} 12 Gear, 25T {part of item 5} 13 Support Assembly, Pick {part of item 5} 14 Bearing {part of item 5} 15 Support, Brush 16 Web, Feed 17 Brush Assembly, Feed (with items 15 & 16) 97 (with 1-4) 98 (with 6, Qty. 6) | |
1 Retard Assembly, (with 2~8), {part of item 98} 2 Gear, 22T {part of item 1}, {part of item 99} 3 Shaft Assembly, Retard {part of item 1} 4 2 Bearing {part of item 1} 5 Roller Assembly {part of item 1} 6 Spacer {part of item 1} 7 Clutch Assembly, Friction {part of item 1} 8 Support, Retard {part of item 1} 9 Gear, 22T {part of item 98}, {part of item 99} 10 3 Bearing {part of item 98} 11 Gear Stopper {part of item 98} 12 Roller Assembly {part of item 98} 13 Bearing {part of item 98} 14 054E08680 Chute, Feed Out {part of item 98} 15 Chute, Feed In 16 Gear, 22/20 {part of item 99} 17 809E27440 Spring 18 Bracket, Stopper 98 (with 1, 9~15 & 17) 99 (with 9 & 16) | |
1 --br> 2 Gear, 30T {part of item 99} 3 -- -- 4 Support Assembly {part of item 99} 5 Gear, 31T {part of item 99} 6 Gear, 33T {part of item 99} 7 Gear. 16/22T {part of item 99} 8 Link Assembly {part of item 99} 9 Spring, Torsion {part of item 99} 10 Bearing, {part of item 99} 11 Harness Clamp {part of item 99} 12 Shaft/Gear 16T Assembly 99 (2, 4~12) | |
1 2 3 068K11630 Support Assembly - Multi-Sheet Bypass Feeder Fully refurbished with 90-day warranty 068K11630 4 (J603<>J604) 5 Spring, Front Damper 6 Spring, Rear Damper 7 059K14753 Feeder Assembly - Multi-sheet Bypass Fully refurbished with 90-day warranty 059K14753 $285.00 (with 8 - 12 & PL 4.2) 8 {part of item 7} 9 Bracket Spring {part of item 7} 10 Stud {part of item 7} 11 Spring, Torsion {part of item 7} 12 Clamp, Cable {part of item 7} | |
1 Feeder Assembly, Multi-sheet Bypass (with 2 - 17 & PL 4.3) {part of PL 4.1} 2 Gear, 16/22 {part of item & PL 4.1} 3 Link Assembly {part of item & PL 4.1} 4 Spring, Torsion {part of item & PL 4.1} 5 Plate, Tie {part of item & PL 4.1} 6 {part of item 1 & PL 4.1} 7 Pin, Retard {part of item & PL 4.1} 8 Shaft, Multi-sheet Bypass Feeder Pad {part of item & PL 4.1} 9 Spring, Multi-sheet Bypass Feeder Pad {part of item & PL 4.1} 10 Guide, Paper {part of item & PL 4.1} 11 Bracket, Frame, Front {part of item & PL 4.1} 12 Latch Assembly, Front {part of item & PL 4.1} 13 Latch Assembly, Rear {part of item & PL 4.1} 14 Latch, Front {part of item & PL 4.1} 15 2 Spring, Latch {part of item & PL 4.1} 16 Support, Retard {part of item & PL 4.1} 17 Latch, Rear {part of item & PL 4.1} | |
1 Feeder Assembly, Upper (with 2~26) {part of PL 4.2, item 1} 2 {part of item 1} 3 Bearing {part of item 1} 4 Shaft Assembly, Feed {part of item 1} 5 Gear, Spur, 40T {part of item 1} 6 Bearing {part of item 1} 7 Spring, Torsion {part of item 1} 8 2 Bearing {part of item 1} 9 022K57020 Roller - Feed - Multi-sheet Bypass Feeder Fully refurbished with 90-day warranty 022K57020 {part of item 1} 10 {part of item 1} 11 Bracket Assembly {part of item 1} 12 2 Gate, Reset {part of item 1} 13 Harness Assembly, Multi-sheet Bypass Feeder (P604<>J108 /P107 /P208) {part of item 1} 14 (with 15 - 25) {part of item 1} 15 Support Assembly, Pick Roller {part of item 1} {part of item 14} 16 Cover, Gear {part of item 1} {part of item 14} 17 Gear, Spur, 30T {part of item 1} {part of item 14} 18 Bearing {part of item 1} {part of item 14} 19 2 Gate, Multi-sheet Bypass Feeder {part of item 1} {part of item 14} 20 20 Bearing {part of item 1} {part of item 14} 21 Shaft Assembly, Pick Roller {part of item 1} {part of item 14} 22 {part of item 1} {part of item 14} 23 {part of item 1} {part of item 14} 24 Spacer {part of item 1} {part of item 14} 25 Gear, Spur {part of item 1} {part of item 14} 26 Chute Assembly, Upper {part of item 1} | |
1 050K42631 Tray Assembly - Multi-sheet Bypass Feeder Fully refurbished with 90-day warranty 050K42631 $157.00 (with 2~9) 2 Pad {part of item 1} 3 Guide, Side {part of item 1} 4 130K83360 Size Sensor Assembly - Multi-sheet Bypass Feeder Fully refurbished with 90-day warranty 130K83360 {part of item 1} 5 Spring, Sensor {part of item 1} 6 Link, Sensor {part of item 1} 7 Tray, Cover {part of item 1} 8 Tray, Low {part of item 1} 9 Tray, Multi-sheet Bypass Feeder {part of item 1} | |
1 (with 2 - 7) 2 2 Spring, Exit {part of item 1} 3 2 Spring, Compression {part of item 1} 4 2 Bearing, In {part of item 1} 5 2 Bearing {part of item 1} 6 Roller Assembly, Pinch {part of item 1} 7 Bracket, Pinch {part of item 1} 8 (with 9, 10 and 13) 9 Spring, Earth {part of item 8} 10 Cover, Left, Low {part of item 8} 11 Feeder Assembly 12 13 Pad, {part of item 8} 14 Spring, Front, Electro-Magnetic Emission | |
1 (with 2, 3, 9~11, 14 and 23) 2 Cover, Left Hand {part of item 1} 3 (with 4~8 and 21) {part of item 1} 4 2 Bearing, Out {part of item 3} 5 2 Bearing, In {part of item 3} 6 Roller Assembly, Pinch {part of item 3} 7 2 Spring, Exit {part of item 3} 8 Bracket, Pinch {part of item 3} 9 Handle Assembly, Left Hand {part of item 1} 10 Support, Cover, Outboard {part of item 1} 11 Support, Cover, Inboard {part of item 1} 12 Hinge, Cover, Outboard 13 Hinge, Cover, Inboard 14 Support, Cover {part of item 1} 15 16 Chute Assembly, Upper 17 2 Spring, Electro-Magnetic Emission 18 Cap 19 20 Support, Rear 21 2 Washer, Nylon {part of item 3} 22 Harness Assembly, Left Hand (J607<>J143 /J144) 23 Pad {part of item 1} | |
1 2 2 Bearing 3 4 (with 5 & 6) 5 Chute, Registration {part of item 4} 6 Eliminator, Static {part of item 4} 7 8 99 (with 2 (qty. 2)) | |
1 Shaft, Hinge 2 Shaft, Hinge Rear 3 802K10631 Cover Assembly - Left Hand New 802K10631 (New) Retired, no longer available: Contact for alternatives (with 4~14 and PL 6.3) 4 Chute, Lower {part of item 3} 5 Guide, Paper {part of item 3} 6 2 Spring, Compression {part of item 3} 7 (with 8 - 13) {part of item 3} 8 2 Spring, Extension {part of item 3} {part of item 7} 9 Roller Assembly, Registration, Left Hand {part of item 3} {part of item 7} 10 Chute Assembly, Registration, Left Hand (with 12) {part of item 3} {part of item 7} 11 Guide, Paper {part of item 3} {part of item 7} 12 Guide, Paper {part of item 3} {part of item 7} {part of item 10} 13 2 Pulley {part of item 3} {part of item 7} 14 {part of item 3} | |
1 Spring, Bias Transfer Roller, In {part of item 18} 2 Chute, Transport {part of item 18} 3 Plate, Eliminator {part of item 18} 4 2 Sleeve, Bias Transfer Roller {part of item 18} 5 2 Spring, Rod {part of item 18} 6 2 Rod, {part of item 18} 7 Chute Assembly, Inlet {part of item 18} 8 Cover Assembly, Left Hand 9 Pad 10 Bracket, Left Hand 11 Plate, Contact, Left Hand 12 Plate, Contact, Left Hand 13 Fimg altrame, Left Hand, Front 14 Frame, Left Hand, Rear 15 Handle Assembly, Left Hand 16 Shield, Bias Transfer Roller {part of item 18} 17 Shield, Bias Transfer Roller {part of item 18} 18 Chute Assembly, Transport (with 1~7, 16 and 17) {part of PL 6.2} | |
1 | |
1 2 Lever, Bias Transfer Roller, OUT {part of item 1} 3 2 Roller, Tracking, Bias Transfer Roller {part of item 1} 4 Roller, Bias Transfer Roller {part of item 1} 5 Spacer, Bias Transfer Roller {part of item 1} 6 Lever, Bias Transfer Roller, IN {part of item 1} 7 (with 8 - 10) 8 Guide, Bias Transfer Roller, IN {part of item 7} 9 12 Plate, Bias {part of item 7} 10 Plate, Contact {part of item 7} 11 12 Spring, Rod Exit 13 14 15 (with 16 - 19) 16 Harness, Laser Print Cartridge Memory (J454<>J606) {part of item 15} 17 Bracket, Connector {part of item 15} 18 2 Spring, Compression {part of item 15} 19 2 Stud, Screw {part of item 15} 20 Guide, Bias Transfer Roller, OUT 21 22 (with 23 and 24) 23 Bracket, Interlock Switch {part of item 22} 24 Switch Assembly, Interlock {part of item 22} 25 Clamp Guide, Bias Transfer Roller 26 27 28 | |
1 (with 2) 2 2 Holder, Nip-Clip Note: Remove and discard the two Nip-Clip Holders when installing a replacement Fuser Assembly. 99A (110 VAC) | |
1 (with 2~22, PL 9.2, PL 9.3 and PL 9.4) 2 {part of item 1} 3 Link, Solenoid {part of item 1} 4 Spring {part of item 1} 5 {part of item 1} 6 Lower Assembly, Chute, Offset (with 7 - 15) {part of item 1} 7 Spring, Pinch {part of item 6} {part of item 1} 8 Spring, Pinch {part of item 6} {part of item 1} 9 Spring, Pinch {part of item 6} {part of item 1} 10 Roller, Pinch {part of item 6} {part of item 1} 11 Roller, Pinch {part of item 6} {part of item 1} 12 {part of item 6} {part of item 1} 13 Chute, Lower {part of item 6} {part of item 1} 14 Eliminator, Static {part of item 6} {part of item 1} 15 Spring, Pinch {part of item 6} {part of item 1} 16 -- 17 -- 18 -- 19-- 20 Frame Assembly, Front {part of item 1} 21 Chute, Lower {part of item 1} 22 Bracket Assembly, Drive {part of item 1} 23 Harness Assembly, Face Up Tray (J601<>P109 /P110/P133/P210) 99 | |
1 4 Bearing {part of PL 9.1, item 1} 2 {part of PL 9.1, item 1} 3 {part of PL 9.1, item 1} 4 (with 5 - 12) {part of PL 9.1, item 1} 5 Rack, Offset {part of item 4} {part of PL 9.1, item 1} 6 Bracket, Offset {part of item 4} {part of PL 9.1, item 1} 7 Sleeve, Offset {part of item 4} {part of PL 9.1, item 1} 8 Roller Assembly {part of item 4} {part of PL 9.1, item 1} 9 Bearing, IN {part of item 4} {part of PL 9.1, item 1} 10 Bearing, OUT {part of item 4} {part of PL 9.1, item 1} 11 Shaft, Offset {part of item 4} {part of PL 9.1, item 1} 12 Pin {part of item 4} {part of PL 9.1, item 1} 13 Gear, 19T {part of PL 9.1, item 1} | |
1 (with 2~16) {part of PL 9.1, item 1} 2 {part of item 1} 3 Plate, Tie {part of item 1} 4 Spring, Plate {part of item 1} 5 Spring Assembly, Pinch {part of item 1} 6 Spring Assembly, Pinch {part of item 1} 7 Roller, Pinch {part of item 1} 8 Roller, Pinch {part of item 1} 9 Chute, Upper {part of item 1} 10 Guide, Paper {part of item 1} 11 Guide, Paper {part of item 1} 12 Chute, Middle {part of item 1} 13 Gate, Exit {part of item 1} 14 Spring, Exit {part of item 1} 15 Spring Assembly, Pinch {part of item 1} 16 Spring Assembly, Pinch {part of item 1} | |
1 (with 2 - 17) {part of PL 9.1, item 1} 2 Support, Exit Drive {part of item 1} 3 Pulley, Exit Drive Idler {part of item 1} 4 Gear, Exit {part of item 1} 5 Gear, Exit 2 {part of item 1} 6 Bracket, Exit Gear 2 {part of item 1} 7 Gear, Exit Idler {part of item 1} 8 Spring, Exit Ratchet {part of item 1} 9 Gear, 25T {part of item 1} 10 {part of item 1} 11 2 Shaft, Clutch {part of item 1} 12 2 Bearing {part of item 1} 13 Gear, 42T {part of item 1} 14 Gear/Clutch Assembly, Friction {part of item 1} 15 Gear, 42T {part of item 1} 16 Bracket, Inverter {part of item 1} 17 Harness Assembly {part of item 1} (J602<>J218/J219) | |
1 2 Clamp, Harness 3 4 Flange, Flywheel 5 Support, Harness 6 Bracket 7 Clamp, Harness 8 Clamp, Harness | |
1 (with 2- 9, 14 & 15) 2 Gear, 22T {part of item 1} 3 Spring {part of item 1} 4 Bracket Assembly {part of item 1} 5 Bracket {part of item 1} 6 Spring, Exit {part of item 1} 7 Bracket {part of item 1} 8 Frame Assembly, Exit, Rear {part of item 1} 9 Holder {part of item 1} 10 Clamp, Harness, 1 11 Clamp, Harness, 2 12 Clamp, Harness, 3 13 162K53843 Connector, Fuser (P12<>J31/J32/J33/J600) 14 Connector (P104) 15 Connector (P602) | |
1 with 6 2 Cover Assembly, Low Voltage Power Supply 3 Harness Assembly, AC Main (J3, J1<>J13, J30, P20) 4 Connector, Outlet 5 Bracket, Finisher 6 7 3 Clamp 8 Clamp | |
1 2 Bracket, System Controller, Rear 3 105K15631 High Voltage Power Supply - R1 HVPS Fully refurbished with 90-day warranty 105K15631 $214.00 (with 5 & 6) 5 Board, Input/Output {part of item 4} 6 Bracket, Board {part of item 4} 7 8 Bracket, Switch 9 Lever, Switch 10 Support, Harness 11 3 Support, Board 12 Clamp, Mini-Saddle 13 Bracket Assembly, AC Driver 14 Harness, Tray 15 Harness, Output 16 Harness, Duplex 17 Bracket, Connector 18 Harness Assembly, Exit 19 105E09921 Transformer (220 VAC version only) 20 105E09290 High Voltage Power Supply - R2 HVPS Fully refurbished with 90-day warranty 105E09290 $119.00 | |
1 (with 2 - 9, 11, 12, and 17) 2 Bracket Assembly, Board {part of item 1} 3 160K74034 Board Assembly, Print Engine Controller 110 VAC {part of item 1} 4 Saddle, Bush {part of item 1} 5 Guide {part of item 1} 6 {part of item 1} 7 Bracket, Fan {part of item 1} 8 Box Assembly, System Controller {part of item 1} 9 Panel, Rear {part of item 1} 10 Cover, System Controller 11 Rail, {part of item 1} 12 3 Clamp {part of item 1} 13 (with item 14) 14 Panel, System Controller Drawer {part of item 13} 15 Harness Assembly, Laser Scanner (J409<>P430) 16 (NJ417<>J401) 17 Clamp {part of item 1} | |
1 048E37272 Cover, Left High Capacity Feeder 2 802E08720 Cover, Front 3 3 Spring, Ground 4 802E12540 Cover, Right 5 048E37260 Cover, Rear 6 Frame Assembly, Cabinet, High Capacity Feeder (with 7 & 8) 7 017E91970 2 Caster 8 017E91980 2 Caster 9 049E30790 Docking Bracket, Left 10 049E30781 Docking Bracket, Right 11 2 Screw 12 2 Guard, Safety 13 830E44280 3 Bracket, Foot 14 017K92561 3 Adjuster, Foot Assembly 15 802E08710 3 Cover, Foot 99 600K65520 Kit, HCF Mounting (with 9~11) | |
1 (with 2~4) 2 Motor Assembly, Feed, High Capacity Feeder 3 Damper Assembly, Motor 4 Bracket, Motor 5 423W47353 Belt, Synchronous 6 Gear, 27/26 T 7 Gear, 88 T 8 Gear, 87T 9 2 Gear, 46 T 10 Gear, 44/40 T 11 12 4 Support Board 13 162K55240 Cable Assembly, High Capacity Feeder (P613<>J480) 14 Harness Assembly, High Capacity Feeder (J484<>J120 /J116 /J119, J485<>P215 /J216) 15 Harness Assembly - High Capacity Feeder A (J482<>J121 /J114 /P211 /J212 /J214 /P213, J483 <> J111 /J112 /J110 /J115 /J117/ J118, J486<>J126) 16 Clip Wire 99. 600K60990 Kit, High Capacity Feeder Drive Gear (with 6~10) | |
1 2 Sensor Actuator, Trays 3 & 4 3 2 Support Actuator, Trays 3 & 4 4 5 6 054K08820 Chute Assembly, Front (Tray 4) 7 110K07040 Switch Assembly, Paper Size (Tray 3) 8 110K98760 2 Switch Assembly, Paper Size (Trays 4 & 5) 9 127K19080 2 Motor Assembly (Trays 4 & 5) 10 003E23672 Tray Stopper, Front (Tray 3) 11 003E23690 Tray Stopper, Rear (Tray 3) 12 Spacer, Left (Tray 3) 13 4 Slider, Right (Tray 3) 14 4 Holder, Harness 15 Guide, Tray (Trays 4 & 5) 16 Clamp 17 Clamp 99 | |
1 Sensor Actuator, Tray 5 2 Support Actuator, Tray 5 3 4 Stopper Link, Trays 3 & 5 5 Stopper Link, Tray 4 6 Spring, Torsion 7 8 Bracket, Stopper 9 Cable Tie 10 Clamp 11 Clamp 12 Clamp 13 Connector 14 Support, Chute 15 Chute, Front Right 16 Holder, Harness 17 Clamp 18 Clamp, Locking 19 Mini Saddle 20 2 Clamp 21 Bush Closed 22 Edge Saddle 99 | |
1 Clutch Assembly 2 Gear, 28T 3 4 5 Roller Assembly 6 Clutch Assembly, One Way 7 Clutch Gear, 25T 8 Bearing 9 Shaft, Feed 10 Gear, 31T 11 Gear, 25T 12 Support Assembly 13 Bearing 14 Guide, Paper 98 99 600K65530 Kit, Tray 3 Clutch (with 1~3) | |
1 Gear, 22/20T 2 Spacer, Retard 3 809E27440 Spring 4 Retard Assembly, (with 5~10) 5 Roller Assembly 6 Spacer 7 Clutch Assembly, Friction 8 Shaft Assembly, Retard 9 2 Bearing 6 10 Support, Retard 11 Gear, 22T 12 Gear Stopper 13 Bearing 14 Bearing 15 Roller Assembly, Take Away 16 Bearing 17 Chute, Feed Out 18 Chute, Feed In 97 604K01130 Kit, Feed Roller (item 5 (Qty. 6)) 98 99 | |
1 Clutch Assembly 2 Bearing, Feed 3 4 Bearing 5 2 Roller Assembly 6 Clutch Assembly One Way 7 Clutch Gear, 25T 8 Bearing 9 Shaft Feed High Capacity Feeder 10 Gear, 31T 11 Gear, 25T 12 Support Assembly Pick 98 99. 600K65550 Kit, Paper Pick Up (with & 2) | |
1 Gear, 22T 2 Spring, Retard 3 4 Roller Assembly 5 Spacer 6 Clutch Assembly, Friction 7 2 Bearing 8 Shaft Assembly, Retard, 9 Support, Retard 10 Support Assembly, Retard 11 Gear Stopper 12 Gear, 22T 13 059K06190 Roller Assembly, Drive 14 Bearing 15 Bearing 98 99 604K01180 Kit, Retard, Take Away Tray 4 (with 1~3 & 10~15) | |
1 Clutch Assembly 2 Bearing, Feed 3 4 Bearing 5 Roller Assembly 6 Clutch Assembly, One-Way 7 Clutch, Gear 25T 8 Bearing 9 Shaft, Feed 10 Gear, 31T 11 Gear, 25T 12 Support Assembly, Pick 13 038E20200 Guide, Paper 98 99 600K65550 Kit, Paper Pickup (with & 2) | |
1 Gear 22 MN 2 Spring, Retard RT 3 Retard Assembly, (with 4~9) 4 Roller Assembly 5 Spacer 6 Clutch Assembly, Friction 7 Bearing 8 Shaft Assembly, Retard 9 Support Retard 10 Shaft Hinge 11 Gear Stopper 12 Joint 13 Spring 14 Bearing 15 Shaft Assembly, Joint 16 Gear, 22T 17 Bearing 18 Bracket Joint 19 Guide, Rod 20 Gear, 22/20T 21 Joint Assembly, Drive (with 12~15) 22 Bracket Assembly, Joint 97 98 600K65570 Kit, Take Away Tray 5 (with 12~20) 99 604K01200 Kit, Retard Take Away Tray 5 (with 1~11) | |
1 802K29120 Cover Assembly, L/H (with 2 ~8) 2 Cover, L/H 3 Bracket Assembly, Pinch 4 Handle Assembly, L/H 5 Support, Cover 6 Support, Cover 7 Pad 8 Chute, Feed, Out, HCF 9 2 Support, L/H Cover 10 Chute, L/H 11 12 | |
1 05K42643 Tray Assembly, LT (with 2~27) 2 Plate, Bottom 3 Gear, 33T 4 Pulley, Cable 5 Cable, Lt 6 Cable, Lt 7 Pulley 8 Guide Wire 9 Bracket Assembly, Brake L (with 10~13) 10 Gear, 12/28T 11 Gear, 12/28T 12 Link Assembly, Brake 13 Bracket Assembly, Brake 14 Stopper, Bracket 15 Tray Stopper, F 16 Guide Assembly, Side 17 Actuator 18 Bracket Guide 19 Housing Assembly, Lt 20 Rail Assembly, Lt 21 802K11920 2 Cover Assembly - Lt 22 Spacer B 23 Spring, Comp 24 Lever Assembly 25 Knob 26 Shaft Assembly, Drive 27 Spacer, Rail 99. 600K61010 Kit, Tray 4 Cables (with 5 & 6) | |
1 050K42653 Tray Assembly, Rt (with 2~23) 2 Plate, Bottom 3 Gear, 33T 4 Pulley, Cable 5 Shaft Assembly, Drive 6 Cable 7 Pulley 8 Guide Wire 9 Bracket Assembly, Brake R (with 10~13) 10 Gear, 12/28T 11 Gear, 12/28T 12 Link Assembly, Brake 13 Bracket Assembly, Brake 14 Bracket, Stopper 15 Stopper, Tray F 16 Guide Assembly, Side 17 Actuator 18 Bracket,Guide 19 Lever Assembly 20 Knob 21 Spring Comp 22 Housing Assembly 23 2 Spacer 99. 600K60950 Kit, Tray 5 Cables (with 6, Qty 4) | |
1 059K14770 Transport Assembly - High Capacity Feeder (with 2~12 2 Chute Assembly, Upper 3 Chute Assembly, Lower 4 Bearing 5 Bearing 6 Roller Assembly, Take Away 7 Bearing, Out 8 Washer, Nylon 9 Bearing, In 10 Spring, Exit 11 Roller Assembly, Pinch 12 Spacer,Rail 13 Screw 14 802K11910 Cover Assembly, Rt 15 Spacer, Rail 16 Rail Assembly, Transport 99 600K85130 Kit, Slide Bar (with 12 (Qty 2) & 16) |