IBM Infoprint 6400-i Parts
Please call for parts assistance
Looking for whole machines?
Click here
Illustrated Parts ListsOnly field-replaceable spares are given part numbers in the illustrated parts lists. Part numbers are not listed for common fasteners and attachment hardware. Items marked "Ref" in the illustrations refer to parts that are not spared or are part of another assembly
| 1 24H8961 Top Cover Kit Includes Mounting Hardware Fully refurbished with 90-day warranty 24H8961 $279.00 2 57G1492 Window- Top Cover (Not visible in diagram) Fully refurbished with 90-day warranty 57G1492 $123.00 Cover Not visible in Figure 3 14H5567 Wireform Paper Guide Assembly Includes mounting hardware Fully refurbished with 90-day warranty 14H5567 $125.00 4 24H8960 Rear Door Kit Includes item 14 5 6 7 8 14H5603 Logo, 6400 9 30H4008 Wire Rope, Front and Rear One on each door 10 30H3986 Shipping Container Kit Cabinet models only 11 14H5572 Hardware Kit 12 13 14 93F7037 Hinge Plate, Top Included in items 4 and 5 15 |  |
| 1 2 30H3981 Runner, Stacker 3 04H4779 Riser, Stacker Runner Clip, Rail 4 Ref Screw (4) 5 14H5296 Spares Kit, Grommet 6 14H5272 Chain Assembly Kit -contains eight chains Fully refurbished with 90-day warranty 14H5272 $65.00 7 9 Ref Grommet, Power Cord (2) Included in item 5 10 75P1181 Rear Tray 11 75P1182 Slide, Ball Bearing, Rear Tray |  |
| 1 2 2 57G1599 Operator Panel Overlay, English 3 Ref Screw, Hex w/Lock Washer (4) 6-32x.375 4 5 Includes ball studs, spring clips, and mounting hardware 6 Ref Screw w/Lock Washer (3) 6-32x.375 7 Ref Screw w/Lock Washer (2) 6-32x.175 8 9 Ref Duct, Air Exhaust 10 173302-001 Paper Entrance Guide Models i20, i24, and i2s 11 173428-001 Spring, Paper Entrance Guide (2) Models i20, i24, and i2s 12 173351-001 Bracket, Paper Entrance Guide, Right Models i20, i24, and i2s 173352-001 Bracket, Paper Entrance Guide, Left Models i20, i24, and i2s |  |
| 1 63H5124 Operator Panel, Pedestal Models 04P, 05P, 08P, 09P, 10P Fully refurbished with 90-day warranty 63H5124 10R3937 153560-002 $225.00 Pedestal Models i5P, i1P 2 3 Ref Screw (5) 6-32x.50 4 63H5125 Bracket, Operator Panel Models i5P, i1P 5 63H5121 Hinge Lid Kit Models i5P, i1P 6 7 Models i5P, i1P 8 Ref Screw (2) 9 Models i5P, i1P 10 Ref Screw (4) 10-32x.625 11 i5P, i1P 12 13 Models i5P, i1P 14 Ref Screw, Captive (2) 15 i5P, i1P 16 63H5122 Lid Accessory Kit Replacement acoustic seals |  |
| 1 54P1464 Shuttle Cover Assembly (Shroud Assembly, Improved Cooling) -i20 Only. Includes items 2 and 11 14H5235 6400 Shroud Assembly Air (Shuttle Cover) Fully refurbished with 90-day warranty 14H5235 $91.00 Includes items 2 and 11 2 Ref Screw, Captive (2) 10-24x.62 with O-ring, .125x.250x.06 3 Ref Screw, Thread Forming (4) 6-32x.25 4 Ref Barrier Shield 5 54P0729 Paper Guide Assembly, V2 All cabinet models 6 Ref Screw, w/Lock Washer (3) 6-32x.25 and #6 Flat Washer 7 54P1379 Platen/Paper Feed Cover Kit Paper feed belt cover Fully refurbished with 90-day warranty 54P1379 8 9 08H7954 Anti-Static Brush Kit Mounts to top of item 4 10 Ref Power Supply Shield Taped to card cage along upper edge 11 14H5179 Paper Scale All except -i20 and -i24 54P1458 Paper Scale, Improved Cooling -i20 and -i24 12 Ref Shim, Paper Path Inserted between item 5 and card cage on -i20 and i24 models only. |  |
| 1 14H5235 6400 Shroud Assembly Air (Shuttle Cover) Fully refurbished with 90-day warranty 14H5235 $91.00 2 Ref Screw, Captive (2) 10-24x.62 with O-ring, .125x.250x.06 3 Ref Screw, Thread Forming (4) 6-32x.25 4 Ref Barrier Shield 5 6 08H7954 Anti-Static Brush Kit 7 Ref Power Supply Shield Taped to card cage along upper edge 8 9 54P1379 Platen/Paper Feed Cover Kit Paper feed belt cover Fully refurbished with 90-day warranty 54P1379 10 14H5179 Paper Scale |  |
| 1 Ref Nut, 6-32 (1) Upper right fan corner only 2 3 Ref Fan Guard 4 Ref Screw, w/Lock Washer (4) 6-32x.1.75 5 Ref Card Cage, Pedestal 6 14H5571 Circuit Breaker 7 Ref Motor Sensor, Left, Cable Assy Housing Connector Kit 14H5288 8 Ref Hammer Bank Logic Cable Assy 9 Ref Shuttle Motor Cable Assy 10 Ref Hammer Bank Power Cable Assy 11 Ref Motor Sensor, Right, Cable Assy Housing Connector Kit 14H5288 12 14H5522 Centronics / Dataproducts Adapter Optional cable assembly 13 Ref Control Panel Cable Assy 14 14H5211 Clamp, Shaft, Receiving 15 Ref Screw, Captive, Power Supply (3) 16 Ref SIMM, Flash Memory 17 Ref SIMM, DRAM 18 |  |
| 1 i05, i5P 1 i10, i1P 1 i15 2 54P1536 IBM 6400-i5P, i05, 050 Shuttle Frame Assembly 500 Fully refurbished with 90-day warranty 54P1536 $595.00 i05, i5P 54P1537 IBM 6400-i10 IBM 6400-i1P Shuttle Frame Assembly 1000 Fully refurbished with 90-day warranty 54P1537 Advanced Exchange 54P1537 IBM 6400-i10 IBM 6400-i1P Shuttle Frame Assembly 1000 Fully refurbished with 90-day warranty 54P1537 i10, i1P 54P1538 IBM 6400-i15 Shuttle Frame Assembly 1500 New 54P1538 Advanced Exchange (New) Retired, no longer available: Contact for alternatives 54P1538 IBM 6400-i15 Shuttle Frame Assembly 1500 Fully refurbished with 90-day warranty 54P1538 Advanced Exchange i15 i05, i5P i10, i1P 54P1529 Hammer Spring (Fret) 1500 New 54P1529 24h8933 (New) Retired, no longer available: Contact for alternatives i15 3 4 Ref P101 Cable Connector Part of item 6 5 Ref Cable Assy, AC-In, Power Supply Part of Field Kit AC Assy 14H5289 6 90H3271 Controller Board, CMX, V5.5, 40MHz Fully refurbished with 90-day warranty 90H3271 Exchange $249.00 All except i20, i2s, i24 7 14H5288 Housing- Connector Kit (P106/P107) P106- Motor Sensor Fully refurbished with 90-day warranty 14H5288 8 75P8157 Single Hammer Bank Logic Cable Protector 9 10 02N6214 Single Hammer Bank Power Cable Assy 11 14H5288 Housing- Connector Kit (P106/P107) P106- Motor Sensor Fully refurbished with 90-day warranty 14H5288 12 14H5522 Centronics / Dataproducts Adapter Optional. 13 14 14H5211 Clamp, Shaft, Receiving 15 Ref Screw, Captive, Power Supply (3) 16 17 18 14H5509 Security Module, Base 14H5490 Security Module, Graphics 19 02N8261 Connector Clip 20 |  |
| 1 54P1466 Hammer Bank Cover Assembly, i20 and i24 Includes items 3 and 4 2 54P1465 Ribbon Mask, i20 and i24 3 Ref Ribbon Mask Clamp Plate (3) 4 Ref Screw, Torx T-10 12 for hammer bank cover 6 for ribbon mask 5 i20 and -i24 6 54P1463 Power Supply PCBA i20 and -i24 7 Ref Hammer Bank Port 8 Ref Cable Assembly, AC-In, Power Supply Part of Field Kit, AC Assy, 14H5289 9 75P2661 6400-I20 CFX Assembly Card V3 Fully refurbished with 90-day warranty 75P2661 Advanced Exchange i20 i24 10 14H5288 Housing- Connector Kit (P106/P107) P106- Motor Sensor Fully refurbished with 90-day warranty 14H5288 11 54P1457 Hammer Bank Logic Cable Assembly 12 13 54P1455 Hammer Bank Power Cable Assy 14 14H5288 Housing- Connector Kit (P106/P107) P106- Motor Sensor Fully refurbished with 90-day warranty 14H5288 15 16 17 14H5211 Clamp, Shaft, Receiving 18 Ref Screw, Captive, Power Supply (3 Places) 19 i20 i24 20 75P2809 41U1159 DIMM- SDRAM- 32MB- 144 Pin (V5 controller only) SD Fully refurbished with 90-day warranty 75P2809 i24 21 14H5509 Security Module Model i20 14H5490 Security Module, Graphics Base Model i20 Security Key (Comes with emulation) Model i24 22 Ref Paper Feed Motor 23 54P1456 Phase Driver Control 24 |  |
| 1 i2s 2 75P2815 Shuttle Frame Assembly 2000LPM Single Fully refurbished with 90-day warranty 75P2815 174539-001 i2s 75P2817 Hammer Spring Assembly 6400-i2s 6500-V20 Fully refurbished with 90-day warranty 75P2817 44D9035 $375.00 i2s 3 54P1463 Power Supply PCBA 4 Ref P101 Cable Connector Part of item 6 5 Ref Cable Assy, AC-In, Power Supply Part of Field Kit AC Assy 14H5289 6 i2s 7 14H5288 Housing- Connector Kit (P106/P107) P106- Motor Sensor Fully refurbished with 90-day warranty 14H5288 8 75P1623 Hammer Bank Logic Cable Assembly 9 Ref Shuttle Drive Cable Assembly 10 54P1455 Hammer Bank Power Cable Assembly 11 14H5288 Housing- Connector Kit (P106/P107) P106- Motor Sensor Fully refurbished with 90-day warranty 14H5288 12 13 14 14H5211 Clamp, Shaft, Receiving 15 Ref Screw, Captive, Power Supply (3) 16 17 75P2809 41U1159 DIMM- SDRAM- 32MB- 144 Pin (V5 controller only) SD Fully refurbished with 90-day warranty 75P2809 18 Ref Security Key (Comes with emulation) 19 Ref Paper Feed Motor 20 Ref Hammer Bank Port 21 Ref Hammer Phase Driver Control 22 |  |
| 1 2 Ref Screw, Socket Cap, 6-32x.38 3 30H3985 Spring, Hammer Bank 4 5 Ref Shuttle Motor Cable Connector 6 176507-001 Anti-Rotation Spring Constraint Model 6400-i2s only |  |
| 1 Ref Screw, Socket Cap, 4-40x.25 Part of item 19 2 Ref Washer, Flat #4 Part of item 19 3 Ref Knob, Tractor Adjust Part of item 19 4 Ref Bushing, Tractor Adjust Part of item 19 5 Ref Washer, Curved Spring (2) Part of item 19 6 Ref Ring, Grip Part of item 18 7 Ref Bearing, Nylon .626 Part of item 18 8 Ref Link Spring Part of item 18 9 Ref Spring, Extension 1.00L Part of item 18 10 Ref Screw, Hex w/Lock Washer, 4-20x.50 Part of item 11 11 57G1521 Ground Clip, Splined Shaft Early i05, i10, i15 models 12 Early i05, i10, i15 models 13 Ref Screw, Thread Forming, 6-32x.25 Part of item 18 14 Ref Clamp, Bearing Part of item 18 15 Ref Tractor Support Shaft Part of item 19. Early i05, i10, i15 models. 16 Early i05, i10, i15 models without Power Stacker. Includes L and R tractors. Will sub to 54P1450 17 Ref E-Ring Part of item 19 18 14H5217 IBM 6400-XXX Tractor Shaft Hardware Kit Fully refurbished with 90-day warranty 14H5217 $72.00 19 20 Ref Bushing Part of item 18 21 24H8593 Paper Support (2) Used on early and newer i05 and i10 models 22 Ref Link, Splined Shaft Skew Adjustment 23 54P1451 Tractor Set, Ironer Roller, LH & RH Installed at factory on all i10 and i15 models with Power Stacker. |  |
| 1 Ref Screw, Socket Cap, 4-40x.25 Part of item 19 2 Ref Washer, Flat #4 Part of item 19 3 Ref Knob, Tractor Adjust Part of item 19 4 Ref Bushing, Tractor Adjust Part of item 19 5 Ref Washer, Curved Spring (2) Part of item 19 6 Ref Ring, Grip Part of item 18 7 Ref Bearing, Nylon .626 Part of item 18 8 Ref Link Spring Part of item 18 9 Ref Spring, Extension 1.00L Part of item 18 10 Ref Screw, Hex w/Lock Washer, 4-20x.50 Part of item 11 11 57G1521 Ground Clip, Splined Shaft Early i05, i10, i15 models 12 Early i05, i10, i15 models 13 Ref Screw, Thread Forming, 6-32x.25 Part of item 18 14 Ref Clamp, Bearing Part of item 18 15 Ref Tractor Support Shaft Part of item 19. Early i05, i10, i15 models. 16 Early i05, i10, i15 models without Power Stacker. Includes L and R tractors. Will sub to 54P1450 17 Ref E-Ring Part of item 19 18 14H5217 Tractor Shaft Hardware Kit Not shown in Figure 54 19 14H5214 Tractor Shaft Kit Not shown in Figure 54 20 Ref Bushing Part of item 18 21 24H8593 Paper Support (2) Used on early and newer i05 and i10 models 22 Ref Link, Splined Shaft Skew Adjustment 23 54P1451 Tractor Set, Ironer Roller, LH & RH Installed at factory on all i10 and i15 models with Power Stacker. |  |
| 1 Ref Screw, Socket Cap, 6-32x.312 Trilob (Self-Tapping) (2) 2 Ref Plate, Tractor Shaft, Left 3 54P1474 Bearing, Ball, Sealed Models i20, i24, i2s, and newer i05, i10, i15 4 54P1459 Guide, Paper Path (4)Models i20, i24, i2s, and newer i05, i10, i15 24H8593 Paper Support (2) 5 54P1475 Tolerance Ring,.37X.25,.006 THK,SS Models i20, i24, i2s, and newer i05, i10, i15 6 54P1468 Splined Shaft i20, i24, i2s, and newer i05, i10, i15 7 Ref Screw, Socket Cap, 6-32x.312 Trilob (Self-Tapping) 8 Ref Plate, Tractor Shaft, Right 9 57P1181 Support Shaft Models i20, i24, i2s, and newer i05, i10, i15 10 54P1451 Tractor Set, Ironer Roller Models i20, i24, i2s with or without power stacker. Includes L&R tractors. Tractor Set Newer i05, i10, i15 without Power Stacker. Includes L&R tractors. Will sub to 54P1450 6408 6400-008 6400-009 (L & R) Tractor Set Fully refurbished with 90-day warranty 54P1450 $155.00 11 Ref Right Side Plate 12 Ref Left Side Plate |  |
| 1 Ref Setscrew Part of item 25 2 Ref Bracket, Platen (2) Part of item 25 3 57G1469 Ironer Assembly, Reverse Paper Feed 4 Ref Screw, Thread Forming (3) 6-32x.25 5 54P1476 Ironer Bracket/Plate Field Kit 6 Ref Plate, Ironer Part of item 5 7 08H7936 Platen Assembly 8 Ref Washer, Flat (2) Part of item 25 9 Ref Screw (2) Part of item 11 10 Ref Washer, Flat #4 (2) Part of item 11 12 Ref Screw, Socket Cap, 6-32x.75 Part of item 15 13 Ref Washer Part of item 15 14 Ref Nut Part of item 15 15 75P8170 Platen Lever Assembly 16 Ref Spring, Extension 1.12L Part of item 25 17 Ref Link, Spring Part of item 25 18 Ref Bearing, Nylon .376 Part of item 25 19 Ref Bracket, Switch Mount Part of item 11 20 Ref Wear Saddle, Platen (2) Part of item 25 21 22 Ref Screw, Socket Cap, 6-32x.44 Part of item 21 23 57G1467 Belt, Timing, 312W, 87 Teeth Platen Open Belt Fully refurbished with 90-day warranty 57G1467 141516-001 141516-901 $49.00 24 54P1379 Platen/Paper Feed Cover Kit Paper feed belt cover Fully refurbished with 90-day warranty 54P1379 25 14H5169 Platen Hardware Kit 26 Ref Platen Washer Part of item 25 27 75P8169 Paper Ironer, Auxiliary On models 6400-i15 and -i2s only, install this part in front of item 3; that is, on the shuttle side |  |
| 1 Ref Setscrew (2) Part of item 30 2 Ref Bracket, Platen Adjust (2) Part of item 30 3 57G1469 Ironer, Paper 4 Ref Screw, Thread-forming (3) 6-32x.313 Trilob 5 54P1476 Ironer Bracket/Plate Field Kit 6 Ref Plate, Ironer Part of item 5 7 54P1477 Platen Includes items 25, 26, 27, and 28 8 Ref Screw (2) Part of item 10 9 Ref Washer, Flat #4 (2) Part of item 10 10 Includes items 8, 9, 18 11 Ref Screw, Socket Cap, 6-32x.75 Part of item 14 12 Ref Washer Part of item 14 13 Ref Nut Part of item 14 14 75P8170 Platen Lever Assembly Includes items 11, 12, 13 15 Ref Spring, Extension 1.12L 16 Ref Link, Spring 17 Ref Bearing, Nylon .376 18 Ref Bracket, Switch Mount Part of item 10 19 Ref Wear Saddle, Platen (2) Part of item 30 20 Ref Platen Drive Pulley 21 Ref Screw, Socket Cap, 6-32x44 22 57G1467 Belt, Timing, 312W, 87 Teeth Platen Open Belt Fully refurbished with 90-day warranty 57G1467 141516-001 141516-901 $49.00 23 Ref Cover, Platen Belt Part of platen/paper feed cover kit 54P1379 24 Ref Platen Washer 25 Ref Platen Spring (2) Part of item 7 26 Ref Anchor, Platen Spring (2) Part of item 7 27 Ref Screw, Button Head, 6-32x.25 Part of item 7 28 Ref Shim, Platen Adjust Wear Part of item 7 29 Ref Bearing, Roller, Platen Shaft (2) 30 57P1473 Camshaft Kit Includes items 1, 2, and 19 31 75P2177 Platen Bracket Kit |  |
| 1 2 Ref Screw, w/Lock Washer (3) Two 6-32x1.75 on bottom One 6-32x0.50 on top left 3 14H5281 6400-XXX Paper Detector Switch Assembly Fully refurbished with 90-day warranty 14H5281 152415-901 152415-001 $68.00 02N7169 Paper Detector Switch Assy Black Back forms 4 Ref Screw, Thread Forming, 6-32x.375 (2) 5 Models i05, i10, and i15 54P1462 Paper Feed Motor Assy, Model i20, i24, and i2s Model i2s only: Re-use the original heat sink. Install it on the motor base and torque the mounting screws to 18 inch-pounds (2.03 N- -m). (The heat sink is not shown in Figure 58.) 6 Ref Motor Pulley, Platen Open, Driver 10 Ref Screw, Hex w/Lock Washer (2) 10-32x.50 11 24H8894 Ribbon Guide Kit Includes Left And Right Ribbon Guides Fully refurbished with 90-day warranty 24H8894 $95.00 12 Includes item 6 13 Ref Washer, Flat #4 (2) 14 Ref Screw, Hex w/Lock Washer (2) 4-40x.38 15 Ref Screw, Hex w/Lock Washer (2) 10-32x.50 16 Ref Shield, Card Cage Fan 17 18 Ref Screw, Hex w/Lock Washer (2) 6-32x.50 19 Ref Washer, Flat #6 (2) 20 i50, i10, i15 i20 and i24 75P1480 Ribbon Hub Kit, i2s 21 Ref Screw, w/Lock Washer (2) 6-32x1.25 22 i05, i10, i15> i20, i24, i2s 23 Ref Boot Cabinet models only 24 Ref Screw, Socket Cap, 10-24x.75 25 Ref Post, Platen Belt Spring 26 Ref Spring, Platen Belt 27 Ref Shim, Ribbon Motor, Left Thin shim 28 Ref Shim, Ribbon Motor, Right Thick shim |  |
| 1 14H5571 Circuit Breaker 2 Ref IEC 320 AC Power Connector Connector J301 3 Ref Chassis Ground Stud 4 Ref Connector P1 To power supply board connector J1 AC 5 Ref Cable Assy, AC-In, Power Supply Part of Field Kit, AC Assy 14H5289 |  |
| 1 Ref Screw (2) 2 Ref Card Cage 3 4 Ref Screw, Captive 5 Ref Standoff, Hex, 3/16 inch M/F, .813 Lg. 6 24H8535 Adapter, Expansion Connector 60-pin 7 Ref Controller Board 8 Ref Controller Board Connector J111 |  |
| 1 75P2811 PCBA, PCI-CT, V2 2 Ref Plate, PCI Cover 3 Ref Card Cage 4 Ref Screw 5 Ref Controller Board |  |
| 1 Ref Screw, Connector Cover (2) 2 Ref Cover Plate, Centronics 3 Ref Ferrite Clamp Used on CMX/CFX controller boards only. 4 14H5287 Centronics I/O Cable Assembly 5 6 Ref Rear of Card Cage 7 Ref Screw (2) |  |
| 1 Sale75P2812 PCBA, PCI-Network Ethernet Fully refurbished with 90-day warranty 75P2812 41U1157 17R7301 2 Ref Plate, PCI Cover 3 Ref Rear of Card Cage 4 Ref Screw 5 Ref Controller Board |  |
| 1 2 Ref Screw 3 75P1625 Cable Assembly, RS-422, I/O 4 Ref RS-422 Connector, 9-Pin 5 Ref Connector J15 6 Ref Controller Board 7 Ref Connector J201, RS-232, 9-Pin 8 Ref Cover Plate |  |
| 1 (Smart-T-) 2 75P2813 Cable, Extension, Smart-T Required in printers with the power stacker so the twinax auto-termination cable will clear the stacker elevator. 3 Ref PCI-CT Twinax Connector |  |