IBM Infoprint Color 1357 (4928)
New
4928-N04 75p4317 (New)
4928 IBM Infoprint Color 1357 and 1357n (75p4317)
28 Page-Per-Minute (PPM) Printer
Large-size media support, (12 x 18 in. paper)
Banner media support, (12 x 36 in.)
| Supplies | |
 53P9396 Toner Cartridge, Black 14,000 | |
 53P9393 Toner Cartridge, Cyan 14,000 | |
 53P9394 Toner Cartridge, Magenta 14,000 | |
 53P9395 Toner Cartridge, Yellow 14,000 | |
 53P9397 Color Photodeveloper Kit (contains 1 each - cyan, magenta, yellow) 28,000 | |
 53P9398 Black Photodeveloper Kit 28,000 | |
 39V0298 Oil Coating Roller | |
 56P9694 Transfer Belt Assy (ITU) | |
 56P9751 Fuser Assembly | |
| Options | |
 53P9377 550 Drawer LTR/LGL/A3 | |
 53P9378 550-Sheet Heavy Media Tray | |
53P9379 High Capacity Feeder | |
53P9380 2x550-Sheet Drawer with Base | 53P9380 2x550-Sheet Drawer with Tray with Base Fully refurbished with 90-day warranty 53P9380 $380.00 |
 53p9381 Duplexer | |
 53P9382 IBM Infoprint 3-hole Punch Finisher | |
53P9383 Staple/Punch Finisher (4 hole) | |
53P9340 Optra Forms**4 MB Flash DIMM | 53P9340 Optra Forms**4 MB Flash DIMM New 53P9340 (New) Retired, no longer available: Contact for alternatives |
| 75P4299 IPDS | |
| 75P4393 ImageQuick Card | |
| 75P4394 Bar Code Card | |
53p9391 Printer Cabinet | |
53P9392 Stand for IBM Color Laser Printer | |
| 53P9584 Parallel 1284 C-B adapter | |
| 53p9585 Parallel Card And C-B Adapter | |
| 53P9328 64 MB memory DIMM | |
| 53p9329 IBM Brand 128MB Memory DIMM | |
| 53p9330 IBM Brand 256MB Memory DIMM | |
| 53P9331 4 MB flash SIMM | |
| 53P9332 8 MB flash SIMM | |
| 53P9333 16 MB flash SIMM | |
 53P9338 5+GB ISP Hard Disk w/Adapter | |
 75p5008 20+ GB Hard Drive | |
| 53P9341 Optra Forms**8 MB Flash DIMM | 53P9341 Optra Forms**8 MB Flash DIMM New 53P9341 (New) Retired, no longer available: Contact for alternatives |
| 53P9342 Optra Forms**16 MB Flash DIMM | 53P9342 Optra Forms**16 MB Flash DIMM New 53P9342 (New) Retired, no longer available: Contact for alternatives |
| 53P9343 Optra Forms**Hard Disk w/Adapt | 53P9343 Optra Forms**Hard Disk w/Adapt New 53P9343 (New) Retired, no longer available: Contact for alternatives |
| 53P9344 Fiber Print Server SC | |
| 53P9346 Fiber Print Server MTRJ | |
| 53P9353 Parallel Card and 1284-C Cable | |
28p1862 Optra Forms* Software | 28P1862 Optra Forms Software New 28P1862 (New) Retired, no longer available: Contact for alternatives |
28p1863 Optra Forms** Director Software | 28P1863 Optra Forms Director Software New 28P1863 (New) Retired, no longer available: Contact for alternatives |
| 28p1869 | Optra Forms**2-Key Security |
| 28p1870 | Optra Forms**3-Key Security |
| 28P1835 Token ring | 28P1835 Token Ring Fully refurbished with 90-day warranty 28P1835 Retired, no longer available: Contact for alternatives |
28P1836 Token-Ring-3 Port | |
28P1839 Ethernet 10/100BaseTX-1 Port | |
| 28p1838 Ethernet for IBM InfoPrint | |
 28P1837 10/100 Ethernet card | |
28P1840 Ethernet 10/100BaseTX-3 Port | |
28P1841 Ethernet 10/100TX/10Base2-1 Pt | |
 28p1845 External serial attachment | |
28p1842 Coax/Twinax Infoprint Series | |
| 28p1843 Tri-Port Adapter | |
| 28p1844 Infrared Adapter | |
| 28p1846 USB/PAR 1284C CARD | |
 28p1871 10 ft. Parallel Cable 1284 | |
| 28p1872 20 ft. Parallel Cable | |
| 28p1874 50 ft Serial Cable | |
| 28p1873 Parallel 1284 A-C Cable 3M | |
 28p1875 USB 2 meter cable |
The IBM 4928 Infoprint Color 1357 is a superior-quality, medium-volume, wide-format color printing solution for the workgroup environment. The printer offers great value with up to 28 pages-per-minute (PPM) monochrome and 28 PPM color capabilities all for an affordable price.
Model Abstract 4928-004
The IBM 4928 Infoprint Color 1357 Model 004 is a low-voltage base model color printer with 128 MB memory, up to 28 PPM print speed in both monochrome and color, fast 600 MHz processor for high-performance color printing, A3/Ledger and tabloid support, PostScript 3 and PCL 6 emulation standard, one 550-sheet tray and one 100-sheet auxiliary tray standard, one 550-sheet face-down output bin, one 100-sheet face-up output bin, optional duplex for two-sided printing, and language support.
Model Abstract 4928-N04
The IBM 4928 Infoprint Color 1357 Model N04 is a low-voltage network model color printer with 256 MB memory, 10/100BaseTX Fast Ethernet card, up to 28 PPM print speed in both monochrome and color, fast 600 MHz processor for high-performance color printing, A3/Ledger and tabloid support, PostScript 3 and PCL 6 emulation standard, one 550-sheet tray and one 100-sheet auxiliary tray standard, a second 550-sheet drawer, one 550-sheet face-down output bin, one 100-sheet face-up output bin, optional duplex for two-sided printing, and language support.
| Highlights |
The Infoprint 1357 is a high-value, wide-format workgroup color printer that delivers up to 28 PPM with outstanding performance and reliability.
This printer can help you improve productivity with:
- Up to 28 PPM print speed in both monochrome and color
- Fast 600 MHz processor for high-performance color printing
- Large-size media support (12 x 18 in. paper)
- Banner media support (12 x 36 in.)
- 128 MB (base models) and 256 MB (network models) memory standard
- Flexibility with A3/Ledger and tabloid support and a broad range of paper handling options
- Document quality with 2400 image quality emulation
- Data stream support with PCL 6 and PostScript Level 3 standard
| Description |
The Infoprint Color 1357 provides:
- High-performance controller with color LED technology using a 600 MHz processor
- A3/Ledger media support
- Large-size media support, (12 x 18 in. paper)
- Banner media support, (12 x 36 in.)
- 128 MB of memory standard on base models and 256 MB standard on network models
- Toner saver mode for reduced toner usage
- Automatic color correction
- Optional Token-Ring, Ethernet, and Coax/Twinax connectivity options
- Optional finisher with stapling, hole punching, and job offsetting
- PCL XL emulation support
- Robust driver support, including Linux
The IBM Infoprint Color 1357 is an A3/Ledger color laser printer with print speeds of up to 28 pages per minute.
Its media handling capabilities include:
- One 550-sheet tray and one 100-sheet auxiliary tray standard for a total of 650 sheets standard input capacity on all models. The network module comes with a second 550-sheet drawer for 1,200 sheets standard input capacity.
- Optional 550-sheet drawers and one 3,000-sheet high capacity feeder for a maximum 5,300 sheets input capacity.
- Optional duplex for two-sided printing.
- One 550-sheet face-down output bin and one 100-sheet face-up output bin standard for a total of 650 sheets standard output capacity.
- Optional staple/punch finisher with a 1,000-sheet output bin for 1,650 sheets maximum output capacity. It requires either printer cabinet or 2x550-sheet drawer with base or two 550-sheet drawers and printer base as prerequisites.
The maximum monthly usage is 100,000 impressions. IBM does not recommend printing to the monthly maximum on a consistent basis.
Infoprint Color 1357 Models
The Infoprint 1357 printer has two base models and two network models. The base models include the printer with 128 MB memory standard. Model 004 is the low-voltage model and Model 005 is the high-voltage model.
The network models include 256 MB of memory, a 10/100BaseTX Fast Ethernet card, and a second 550-sheet drawer standard. Model n04 is the low-voltage model and Model n05 is the high-voltage model.
High-Performance Controller
The Infoprint Color 1357 controller has a 600 MHz RM7000C processor. It provides robust data stream support with PostScript 3 emulation and PCL 6 emulation standard.
- Memory:
There are two slots available for SDRAM memory and flash memory. The controller supports a maximum of 512 MB of SDRAM memory and a maximum of 16 MB of optional flash memory. - Printer System Attachment Interfaces:
- The base printer models come standard with an IEEE 1284 Parallel interface with a Type B connector and a USB interface.
- The network printer models come standard with USB interface and an integrated 10/100BaseTX Fast Ethernet interface.
- Optional features are available for other network connections.
The Infoprint Color 1357 supports 2400 image quality resolution.
The Toner Darkness setting offers four user-selectable levels to balance your needs for print darkness and toner savings. The higher the value selected, the darker the print (level 4 is the darkest setting). On the other hand, a lower number means more toner savings (level 1 is the lightest setting). Level 4 is the default setting.
The printer offers up to 50% toner savings with a setting of "1", up to 35% toner savings with a setting of "2", and up to 20% toner savings with a setting of "3", thus reducing the cost of printing.
The Toner Darkness menu is available through the operator panel under the Print Quality menu.
Font Support for Infoprint Color 1357
The printer's resident fonts include support for the following:
Number of Number ofEmulation Scalable Fonts Bitmapped Fonts
------------ -------------- ---------------
PCL 6 84 2
PostScript 2 156 0
PPDS 39 5
Accessibility by People with Disabilities
For Hardware Offerings
The following features support use by people with disabilities:
- Controls and latches are operable with one hand and minimal dexterity.
- Keys are discernible by touch without activating them.
- The display, controls, latches, and levers are accessible to someone in a wheel chair.
- Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.
The Infoprint Color 1357 maximum print speeds are shown in the following table. Actual performance depends on:
- Interface to the host (serial, parallel, network)
- Host system and application
- Network complexity and traffic
- Page complexity and content
- Certain printer options installed and selected
- Printer memory
- Printer resolution
- Media size, media type setting and tray source
Media Drawer Feeder Tray
-------------------- -------- ------------- ---------
Simplex Printing
(Pages per Minute)
Letter-LEF 28.0 ppm 28.0 ppm 28.0 ppm
Ledger-SEF 16.0 ppm NS 16.0 ppm
Legal-SEF 19.0 ppm NS 19.0 ppm
A3-SEF 16.0 ppm NS 16.0 ppm
A4-LEF 29.0 ppm 29.0 ppm 29.0 ppm
A5/Exec-LEF NS NS 38.0 ppm
B4-SEF 18.0 ppm NS 18.0 ppm
B5-LEF NS NS 32.0 ppm
12 x 18 in. NS NS 14.0 ppm
11 x 36 in. NS NS N/A
Transparencies-LEF 22.0 ppm NS 22.0 ppm
Cardstock-LEF NS NS 11.0 ppm
Envelopes-LEF NS NS 11.0 ppm
Paper Labels 22.0 ppm NS 22.0 ppm
Duplex Printing
(Impressions per Minute)
Letter-LEF 19.0 ipm 19.0 ipm 19.0 ipm
Ledger-SEF 11.0 ipm NS 11.0 ipm
Legal-SEF 12.0 ipm NS 12.0 ipm
A3-SEF 11.0 ipm NS 11.0 ipm
A4-LEF 19.0 ipm 19.0 ipm 19.0 ipm
A5/Exec-LEF NS NS 20.0 ipm
B4-SEF 12.0 ipm NS 12.0 ipm
B5-LEF NS NS 19.0 ipm
12 x 18 in. NS NS NS
11 x 36 in. NS NS NS
Transparencies-LEF NS NS NS
Cardstock-LEF NS NS NS
Envelopes-LEF NS NS NS
Paper Labels NS NS NS
Note:
- LEF=Long Edge Feed
- SEF=Short Edge Feed
- NS=Not Supported
First Copy Times are shown in the following table.
Printer Mode Time (seconds)
---------------- --------------
From Standby
- Monochrome 15.0
- Color 15.0
From Power Saver
- Monochrome <150.0
- Color <150.0
Note: First Copy time is defined as the elapsed time when hitting enter on the PC to the page exiting to the output bin. Paper is picked from the primary tray and paper exits to the primary output bin. Media is letter size paper printed in 300 and 600 dpi simplex printing.
Print Area
The Infoprint Color 1357 printable area is limited to within 4.2 mm (0.167 in.) of top, bottom, left or right edges of the media. Any information placed outside this specified printable area will not print.
Print Quality
General Statement on Print Quality
The Infoprint Color 1357 will provide satisfactory print quality and feed reliability when using paper designed for use with xerographic copiers and laser printers. During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure high quality printing and good performance throughout the life of the printer.
Color Registration and Density
The Infoprint Color 1357 performs plane-to-plan color registration automatically. When prompted, the printer images directly on the transfer belt (rather than the media), measures the color registration and adjusts the image timing appropriately.
Printer Default Settings
The default settings for the Infoprint Color 1357 are listed below:
- Toner Darkness: 4
- Print Mode: Color
- Printer Usage: Max Speed
- Print Resolution: 2400IQ
- Color Correction: Auto
Color Correction Settings
The Infoprint Color 1357 will offer the following color correction settings:
- Auto (Default) - Applies different color correction to each object on the printed page depending upon the type of object and how the color for each object is specified.
- Vivid - Applies a color correction algorithm that produces brighter, more saturated colors.
- Off - No color correction is implemented.
- CMYK - Applies color correction to approximate SWOP R color output.
- Display - Applies color correction to approximate the colors on a computer display. Based on the sRGB standard.
- Manual - Allows users to customize color correction output from the Op Panel. Setting selectable from the Driver.
"Auto/default" Color Correction Setting
Incoming Color Format Color Correction Output
--------------------- -----------------------
RGB Graphics sRGB Vivid
RGB Image sRGB Display
RGB Text sRGB Vivid
CMYK Graphics US CMYK
CMYK Image US CMYK
CMYK Text US CMYK
"Manual" Color Correction Output Op Panel Selections
Incoming Color Correction
Color Foramt Default Other Output Selections
------------- ------------------ ----------------------------
RGB Graphics sRGB Vivid Vivid, sRGB Display, RGB Off
RGB Image sRGB Display sRGB Vivid, Vivid, RGB Off
RGB Text sRGB Vivid Vivid, SRGB Display, RGB Off
CMYK Graphics Euro CMYK, US CMYK Vivid CMYK, CMYK Off
CMYK Image Euro CMYK, US CMYK Vivid CMYK, CMYK Off
CMYK Text Euro CMYK, US CMYK Vivid CMYK, CMYK Off
"Manual" Color Correction Output Selection Definitions
- Vivid - Applies a color correction algorithm that produces brighter, more saturated colors. May be selected for all incoming color formats.
- sRGB Display - Applies color correction to produce output that approximates the colors displayed on a computer monitor.
- sRGB Vivid - Increased color saturation for the sRGB Display color correction.
- RGB Off - No color correction is implemented.
- US CMYK - Applies color correction to approximate SWOP R color output.
- Vivid CMYK - Increased color saturation for the US CMYK color correction.
- CMYK Off - No color correction is implemented.
- Euro CMYK - Applies color correction to approximate EuroScale color output
Data Streams
The Infoprint Color 1357 supports the following data streams:
- PostScript Level 3 Emulation
- PCL 6 Emulation
- PCL XL Emulation
Fonts and Symbol Sets
There are 83 symbol sets in the PCL 6 emulation to support all the languages that use these characters. The symbol set names are listed below. Not all symbol sets are supported by all fonts. Refer to the Technical Reference manual or use the printer operator panel to find which symbol sets are supported by each font.
The Infoprint Color 1357 will have UTF-8 code support standard. UTF-8 code is a particular way in which fonts are accessed. UTF-8 code is a particular way in which fonts are accessed. UTF-8 is available for PCL and PostScript fonts.
The fonts in the PCL emulation are compatible with the fonts in the HP5500** and include four additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible and include 20 additional fonts above and beyond the Adobe PostScript 3 fonts.
Additional fonts can be downloaded to the printer RAM or optional Flash DIMM or Hard Disk. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts, and PPDS emulation supports only downloadable bitmapped fonts. Font cards and font cartridges are not supported.
Included on the CD-ROM shipped with the printer are a variety of downloadable fonts for Hebrew and Arabic and additional support for the Euro currency character.
Also included on the CD-ROM is the FontVision Font Management utility and screen fonts to match the resident scalable fonts.
PostScript 3 Font Names - 156 Scalable Fonts
Note: Font order is partially alphabetical and partially functional.
AlbertusMT
AlbertusMT-Italic
AlbertusMT-Light
AntiqueOlive-Roman
AntiqueOlive-Italic
AntiqueOlive-Bold
AntiqueOlive-Compact
ArialMT
Arial-ItalicMT
Arial-BoldMT
Arial-BoldItalicMT
AvantGarde-Book
AvantGarde-BookOblique
AvantGarde-Demi
AvantGarde-DemiOblique
Bookman-Light
Bookman-LightItalic
Bookman-Demi
Bookman-DemiItalic
Coronet-Regular
Courier
Courier-Oblique
Courier-Bold
Courier-BoldOblique
CourierPS Bold Oblique
Courier-BoldOblique
Garamond-Antiqua
Garamond Halbfett
Garamond-Kursiv
Garamond-KursivHalbfett
Helvetica-Light
Helvetica-LightOblique
Helvetica-Black
Helvetica-BlackOblique
Helvetica
Helvetica-Oblique
Helvetica-Bold
Helvetica-BoldOblique
Helvetica-Narrow
Helvetica-Narrow-Oblique
Helvetica-Narrow-Bold
Helvetica-Narrow-BoldOblique
Intl-CG-Times
Intl-CG-Times-Italic
Intl-CG-Times-Bold
Intl-CG-Times-BoldItalic
Intl-Univers-Medium
Intl-Univers-MediumItalic
Intl-Univers-Bold
Intl-Univers-BoldItalic
Intl-Courier
Intl-Courier-Oblique
Intl-Courier-Bold
Intl-Courier-BoldOblique
LetterGothic
LetterGothic-Slanted
LetterGothic-Bold
LetterGothic-BoldSlanted
Marigold
NewCenturySchlbk-Roman
NewCenturySchlbk-Italic
NewCenturySchlbk-Bold
NewCenturySchlbk-BoldItalic
Optima
Optima-Bold
Optima-BoldItalic
Optima-Italic
Palatino-Roman
Palatino-Italic
Palatino-Bold
Palatino-BoldItalic
Symbol
Times-Roman
Times-Italic
Times-Bold
Times-BoldItalic
TimesNewRomanPSMT
TimesNewRomanPS-ItalicMT
TimesNewRomanPS-BoldMT
TimesNewRomanPS-BoldItalicMT
Univers
Univers-Oblique
Univers-Bold
Univers-BoldOblique
Univers-Condensed
Univers-CondensedOblique
Univers-CondensedBold
Univers-CondensedBoldOblique
Wingdings-Regular
ZapfChancery-MediumItalic
ZapfDingbats
Univers-Extended
Univers-ExtendedObl
Univers-BoldExt
Univers-BoldExtObl
Univers-Light
Univers-LightOblique
Clarendon
Clarendon-Light
Clarendon-Bold
Helvetica-Condensed
Helvetica-Condensed-Bold
Helvetica-Condensed-BoldObl
Helvetica-Condensed-Oblique
StempelGaramond-Bold
StempelGaramond-BoldItalic
StempelGaramond-Italic
StempelGaramond-Roman
Apple-Chancery
Chicago
Geneva
Monaco
NewYork
Oxford
Taffy
MonaLisa-Recut
Candid
Bodoni
Bodoni-Italic
Bodoni-Bold
Bodoni-BoldItalic
Bodoni-Poster
Bodoni-PosterCompressed
CooperBlack
CooperBlack-Italic
Copperplate-ThirtyTwoBC
Copperplate-ThirtyThreeBC
Eurostile
Eurostile-Bold
Eurostile-ExtendedTwo
Eurostile-BoldExtendedTwo
GillSans
GillSans-Italic
GillSans-Bold
GillSans-BoldItalic
GillSans-Condensed
GillSans-BoldCondensed
GillSans-Light
GillSans-LightItalic
GillSans-ExtraBold
Goudy
Goudy-Italic
Goudy-Bold
Goudy-BoldItalic
Goudy-ExtraBold
HoeflerText-Regular
HoeflerText-Italic
HoeflerText-Black
HoeflerText-BlackItalic
HoeflerText-Ornaments
JoannaMT
JoannaMT-Italic
JoannaMT-Bold
JoannaMT-BoldItalic
LubalinGraph-Book
LubalinGraph-BookOblique
LubalinGraph-Demi
LubalinGraph-DemiOblique
PCL 6 Font Names - 84 Scalable Fonts
Note: Font order is partially alphabetical and partially functional.
Albertus Medium
Albertus Extra Bold
Antique Olive
Antique Olive Italic
Antique Olive Bold
Arial
Arial Italic
Arial Bold
Arial Bold Italic
ITC Avant Garde Book
ITC Avant Garde Book Oblique
ITC Avant Garde Demi
ITC Avant Garde Demi Oblique
ITC Bookman Light
ITC Bookman Light Italic
ITC Bookman Demi
ITC Bookman Demi Italic
Clarendon Condensed Bold
Coronet
CourierPS
CourierPS Oblique
CourierPS Bold
CourierPS Bold Oblique
CG Omega
CG Omega Bold
CG Omega Italic
CG Omega Bold Italic
Garamond Antiqua
Garamond Halbfett
Garamond Kursiv
Garamond Kursiv Halbfett
Helvetica Light
Helvetica Light Oblique
Helvetica Black
Helvetica Black Oblique
Helvetica
Helvetica Italic
Helvetica Bold
Helvetica Bold Italic
Helvetica Narrow
Helvetica Narrow Italic
Helvetica Narrow Bold
Helvetica Narrow Bold Italic
CG Times
CG Times Italic
CG Times Bold
CG Times Bold Italic
Univers Medium
Univers Medium Italic
Univers Bold
Univers Bold Italic
Courier
Courier Italic
Courier Bold
Courier Bold Italic
Letter Gothic
Letter Gothic Italic
Letter Gothic Bold
Marigold
Century Schoolbook Roman
Century Schoolbook Italic
Century Schoolbook Bold
Century Schoolbook Bold Italic
Palatino Roman
Palatino Italic
Palatino Bold
Palatino Bold Italic
SymbolPS
Symbol
Times Roman
Times Italic
Times Bold
Times Bold Italic
Times New Roman
Times New Roman Italic
Times New Roman Bold
Times New Roman Bold Italic
Univers Condensed Medium
Univers Condensed Medium Italic
Univers Condensed Bold
Univers Condensed Bold Italic
Wingdings
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbats
ZapfDingbats
2 bitmapped fonts
Line Printer 16
POSTNET Barcode
Symbol Sets/Names
ABICOMP Brazil/Portugal
ISO 8859-1 Latin 1 (ECMA-94)
Math-8
ABICOMP International
ISO 8859-2 Latin 2
Greek-8
DeskTop
ISO 8859-5 Latin/Cyrillic
Turkish-8
Legal
ISO 8859-7 Latin/Greek
Roman-8
MC Text
ISO 8859-9 Latin 5
Roman-9
Microsoft Publishing
ISO 8859-10 Latin 6
Roman Extension
Russian-GOST
ISO 8859-15 Latin 9
Ukrainian
Ventura ITC Zapf Dingbats
PCL ITC Zapf Dingbats
PC-8 Bulgarian
Ventura International
PS ITC Zapf Dingbats
PC-8 Danish/Norwegian (437N)
Ventura Math
PS Math
PC-8 Greek Alternate (437G)
Ventura US
PS Text
PC-8 Turkish (437T)
Pi Font
PC-8 Latin/Greek
Windows 3.0 Latin 1
Symbol
PC-8 PC Nova
Windows 98 Cyrillic
Wingdings
PC-8 Polish Mazovia
Windows 98 Greek
POSTNET Barcode
PC-8 Code Page 437
Windows 98 Latin 1
Windows 98 Latin 2
ISO : German
PC-775 Baltic (PC-8 Latin 6)
Windows 98 Latin 5
ISO : Spanish
PC-850 Multilingual
Windows 98 Latin 6 (Baltic)
ISO 2: IRV (Int'l Ref Version)
PC-851 Greece
ISO 4: United Kingdom
PC-852 Latin 2
ISO 6: ASCII
PC-853 Latin 3 (Turkish)
ISO 10: Swedish
PC-855 Cyrillic
ISO 11: Swedish for Names
PC-857 Latin 5 (Turkish)
ISO 14: JIS ASCII
PC-858 Multilingual Euro
ISO 15: Italian
PC-860 Portugal
ISO 16: Portuguese
PC-861 Iceland
ISO 17: Spanish
PC-863 Canadian French
ISO 21: German
PC-865 Nordic
ISO 25: French
PC-866 Cyrillic
ISO 57: Chinese
PC-869 Greece
ISO 60: Norwegian version 1
PC-911 Katakana
ISO 61: Norwegian version 2
PC-1004 OS/2
ISO 69: French
ISO 84: Portuguese
ISO 85: Spanish
Note: Not all fonts support all of the symbol sets. Refer to the Technical Reference manual for your specific printer or use your printer operator panel to find which symbol sets are supported by each font.
Media Support
All models come standard with one 550-sheet paper drawer and one 100-sheet auxiliary tray. One 550-sheet face down output bin and one 100-sheet face up output bin are standard. See tables below for standard and maximum media capacities.
Input Media Capacities (Sheets)
Drawer Drawer Drawer Drawer High Cap. Total
Aux Tray 1 2 3 4 Feeder Capacity
-------- ------ ------ ------ ------ --------- --------
Standard 100 550 650
Maximum 100 550 550 550 550 3000 5300
Output Media Capacities (Sheets)
Standard Optional
Face Down Face Up(1) Finisher Total
Output Bin Output Bin Output Bin Capacity
---------- ---------- ---------- --------
Standard 550 100 650
Maximum 550 100 1000 1650
Note: (1) This is either the standard face up output bin or the finisher face up output bin if the finisher is installed.
Media Sizes Supported
Input Media
550- Heavy High
Aux. Sheet Media Capacity
Paper Size & Type Tray Drawer Tray Feeder Duplex
------------------------ ---- ------ ----- -------- ------
A4 (210x297 mm) Yes Yes Yes Yes Yes
Letter (8.5"x11"] Yes Yes Yes Yes Yes
A5 (148x210 mm) Yes No Yes No Yes
B5-JIS (182x257 mm) Yes No No No Yes
B4-JIS (364x252 mm) Yes Yes Yes No Yes
Legal (8.5"x14"] Yes Yes Yes No Yes
Executive (7.25"x10.5"] Yes No No No Yes
Ledger (11"x17"] Yes Yes Yes No Yes
Tabloid (11"x17"] Yes Yes Yes No Yes
A3 (297x420 mm) Yes Yes Yes No Yes
12 x 18 (12"x18"] Yes No No No No
11.69 x 36 (11.69"x36"] Yes No No No No
7 3/4 Env.(98.4x190.5mm) Yes No No No No
9 Env. (98x225 mm) Yes No No No No
Commercial #10 Env. Yes No No No No
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No No No No
C4 Env. Yes No No No No
B5 Env. (176x250 mm) Yes No No No No
DL Env. (110x220 mm) Yes No No No No
Other Env.(297x297 mm) Yes No No No No
Universal(1) Yes No No No Yes
Universal(2) Yes No No No Yes
Paper Yes Yes Yes Yes Yes
Transparencies Yes No Yes No No
Cardstock Yes No No No No
Glossy Paper Yes Yes Yes No Yes
Paper Labels Yes No Yes No No
Note: (1) Size 69.85x127mm to 229x355.6mm (2.75x5 in. to 9.01x14 in.) 250-sheet Universal tray does not support index cards 400-sheet Universal tray supports paper no shorter than 7 in.
Note: (2) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.)
Output Media
Standard Finisher Finisher
Face Down Face Up(1) Face Down Face Up
Paper Size & Type Output Bin Output Bin Output Bin Output Bin
----------------------- ---------- ---------- ---------- ----------
A4 (210x297 mm) Yes Yes Yes Yes
Letter (8.5"x11"] Yes Yes Yes Yes
A5 (148x210 mm) Yes Yes Yes No
B5-JIS (182x257 mm) No Yes Yes No
B4-JIS (364x252 mm) Yes Yes Yes No
Legal (8.5"x14"] Yes Yes Yes No
Executive (7.25"x10.5"] Yes Yes Yes No
Ledger (11"x17"] Yes Yes Yes No
Tabloid (11"x17"] Yes Yes No Yes
A3 (297x420 mm) Yes Yes Yes No
12 x 18 (12"x18"] Yes No No No
11.69 x 36 (11.69"x36"] Yes No No No
7 3/4 Env.(98.4x190.5mm) No Yes No No
9 Env. (98x225 mm) No Yes No No
Commercial #10 Env. No Yes No No
(104.8x241.3 mm)
C5 Env. (169x229 mm) No Yes Yes No
C4 Env. No Yes Yes No
B5 Env. (176x250 mm) No Yes Yes No
DL Env. (110x220 mm) No Yes Yes No
Other Env.(297x297 mm) No Yes Yes No
Universal(2) No Yes Yes No
Universal(3) No Yes Yes No
Paper Yes Yes Yes Yes
Transparencies No Yes Yes No
Cardstock Yes Yes Yes No
Glossy Paper Yes Yes Yes Yes
Paper Labels No Yes Yes No
Note: (1) This is either the standard face up output bin or the finisher face up output bin if the finisher is installed.
Note: (2) Size 69.85x127mm to 229x355.6mm (2.75x5 in. to 9.01x14 in.) 250-sheet Universal tray does not support index cards 400-sheet Universal tray supports paper no shorter than 7 in.
Note: (3) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.)
Media Type and Weights Supported
Input Media
Standard Heavy Media High Capacity
Print Media Aux. Tray Tray Tray Feeder
----------------- ----------- ----------- ----------- -------------
Copier/ 60-105 gsm 60-105 gsm 105-176 gsm 60-105 gsm
Xerographic 16-28 lb 16-28 lb 28-47 lb 16-28 lb
Specialty Paper/ 120 gsm 120 gsm 120 gsm NS
Glossy Laser 80 lb book/ 80 lb book/ 80 lb book/
32 lb bond 32 lb bond 32 lb bond
Card Stock/ 165 gsm NS NS NS
Index Bristol 90 lb index
44 lb bond
Transparencies/ 170 gsm NS 170 gsm NS
Color Laser 45.2 lb bond 45.2 lb bond
Paper Labels 180 gsm NS 180 gsm NS
Upper - Limit 48 lb bond 48 lb bond
12 x 18/ 90 gsm NS NS NS
Xerographic 24 lb bond
Banner Paper/ 90 gsm NS NS NS
Xerographic 24 lb bond
Envelopes 75-105 gsm NS NS NS
20-28 lb
Note: NS = Not Supported.
Output Media
Standard Face Up Face Down
Print Media Output Bin Bin
----------------- ----------- ----------- -------------
Copier/ 60-105 gsm 60-105 gsm 105-176 gsm
Xerographic 16-28 lb 16-28 lb 28-47 lb
Specialty Paper/ 120 gsm 120 gsm 120 gsm
Glossy Laser 80 lb book/ 80 lb book/ 80 lb book/
32 lb bond 32 lb bond 32 lb bond
Card Stock/ 165 gsm 165 gsm NS
Index Bristol 90 lb index 90 lb index
44 lb bond 44 lb bond
Transparencies/ 175 gsm 175 gsm NS
Color Laser 47 lb bond 47 lb bond
Paper Labels 180 gsm 180 gsm NS
Upper - Limit 48 lb bond 48 lb bond
12 x 18/ 90 gsm 90 gsm NS
Xerographic 24 lb bond 24 lb bond
Banner Paper/ 90 gsm NS NS
Xerographic 24 lb bond
Envelopes NS 75-105 gsm NS
20-28 lb
Note: NS = Not Supported.
Additional Media Guidelines
Follow the media guidelines below for successful printing:
Paper
- Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
- Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.
- Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the Infoprint Color 1357
- Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.
- Recycled paper less than 75 gsm (20 lb) may cause unacceptable results.
Envelopes
- All envelopes should be new, unused, and without package damage.
- Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
- Minimum weight: 90 g/m2 (24 lb.)
- The following envelopes should not be used:
- Envelopes with windows, holes, perforations, cutouts, or deep embossing.
- Envelopes with metal clasps, string ties, or metal folding bars.
- Envelopes with exposed flap adhesive when the flap is in the closed position.
- For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
- Under high humidity conditions (over 60%), envelopes may seal during printing.
Transparencies
- Use letter or A4-size sheets only.
- Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint Color 1357.
Labels
Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.
Media Size and Auto Size Sensing
The Infoprint Color 1357 printer has the following sensors:
Input Sensors
Paper Size Paper Out Tray Low Tray Present
--------------------- ---------- --------- -------- ------------
Integrated 550-sheet Yes Yes Yes Yes
Optional 550-sheet Yes Yes Yes Yes
High Capacity Feeder Yes Yes Yes Yes
Auxiliary Tray No Yes No Yes
Heavy Media Tray No Yes No Yes
Output Sensors
Near Full Full Staple Empty Tray Present
--------------------- --------- ------ ------------ ------------
Standard 550-sheet Yes Yes No No
Standard (Face Up) No No No Yes
Finisher (Face Up) No No No No
Finisher (Face Down) Yes Yes Yes Yes
Other Sensing
Sensing
------------------------------ ---------
Narrow Media Yes
OCR New/Present Yes
Toner Cart. new/present Yes
Photodeveloper new/present Yes
Cover open.cart. present Yes
Transparency present (in path) Yes
Certifications
Infoprint Color 1357 complies with the global safety standard for Information Technology Equipment, i.e. IEC 60950, and its country equivalents in the markets we serve. The following sections highlight the approvals and certifications that Infoprint Color 1357 is expected to receive.
120V Version
- Underwriters Laboratories, Inc. UL 1950, Third Edition, Information Technology Equipment deviations D1 and D2
- U.S. FDA, CDRH registration per 21 CFR Chapter I, Subchapter J, Section 1040
- Energy Star compliant
- FCC Class B (w/o network cable) and FCC Class A (with network cable) per FCC Rules, Parts 2 and 15
- Canadian Standards Association CAN/CSA-C22.2 No. 950-95, Third Edition, Information Technology Equipment deviations D1 and D2 Note
- This and the UL standard are a single "bi-national" document, published jointly with UL
- Industry Canada (EMC) Compliance Statement
- Official Mexican State Agency approval & import registration to equipment standard NOM-018-SCFI-1993 Safety of Data Processing Equipment
- IEC 320, International Standard Electrical Appliance Connectors
Software
MarkVision Professional and printer drivers are provided on the Drivers, MarkVision, and Utilities CD that is packaged with the printer. See Publications section for details. MarkVision Professional for Sun Solaris, SuSE Linux, Red Hat Linux, HP-UX and IBM AIX operating systems are available from the IBM Web site.
The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.
Operating Systems
The Infoprint Color 1357 is compatible with applications running under the following operating systems for either local or network connections: For information about USB connections, see Local Connections.
Apple Macintosh
- Apple MacOS 8.6 or later
Microsoft Windows
- Microsoft Windows 95 4.00.950 or later
- Microsoft Windows 98, 2nd Edition
- Windows Me
- Microsoft Windows NT 4.00
- Microsoft Windows NT 4.00 Server
- Microsoft Windows 2000 Professional
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
Download the latest printer drivers from the IBM Web site.
Novell
- Novell NetWare** 3.x, 4.x, 5.x including full DNS and NDPS support
- Novel** Distributed Print Services (NDPSTM) 2.0 or later with IBM NDPS IP Gateway.
- Novel NetWare Enterprise Print Services (NES) with IBM NDPS IP Gateway.
Download the NDPS IP Gateway from the IBM Web site.
Linux
- Caldera eDesktop 2.4
- Red Hat Linux 6.1, 6.2, 7.0
- SuSE 6.3, 6.4, 7.0 Linux
- TurboLinux Workstation 6.0, 6.1
Download the Enhanced Printer Drivers from the IBM Web site.
UNIX
- Compaq Tru64 (Digital) UNIX 4.0D
- HP-UX 10.x, 11.x
- IBM AIX 4.2.1 or higher
- SCO OpenServer 5.0.4 or higher
- SGI IRIX 6.x
- Sun Solaris x86 2.6, 7, 8
- Sun Solaris 2.6, 7, 8
- UnixWare 7.x
Download the Enhanced Printer Drivers from the IBM Web site.
Other
- Virtually any platform supporting TCP/IP
- IBM iSeries Systems with TCP/IP with OS/400** V5R1 or later using OS/400 Host Print Transform.
The software applications that operate with most Apple LaserWriter printers will generally operate with the Infoprint 1312. The Macintosh 128, 512, and 512e Computers are not supported.
Management Solutions (MarkVision**)
MarkVision Professional, MarkVision Messenger, NetPnP and Software Installation and Distribution tools are provided on Drivers, MarkVision and Utilities CDs.
MarkVision Professional
MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a Web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.
MarkVision Messenger
MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.
NetPnP (Provided on CD)
NetPnP senses when an additional IBM printer is attached to the network and automatically creates a shared printer object on the Windows NT 4.0 or Windows 2000 system. Furthermore, NetPnP notifies end-users via e-mail that the new network printer is available for printing. Designed for Windows NT 4.0 and Windows 2000 environments, Net PnP makes the Infoprint Color 1357 printers available to end-users within seconds of network attachment.
Software Installation and Distribution Tools (Provided on CD)
In Windows NT 4.0 and Windows 2000 environments, these tools enable administrators to push printer software installation to other Windows NT 4.0 or Windows 2000 workstations or to write a script that will install specified printer software on specified Windows NT 4.0 or Windows 2000 workstations on the network. In Windows 9X environments, it enables administrators to write installation scripts that can then be distributed to other workstations. When executed, these scripts will silently install all specified IBM software.
Solaris Ready for Sun customers
These printers are certified Solaris Ready by Sun and include Infoprint Color 1357 Enhanced Printer Drivers for Sun Systems and Sun specific documentation seamless installation and use in Sun Solaris environments. The IBM network printers are Ethernet-ready for use in Sun networks.
The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances. MarkVision Professional is available from the IBM Web site.
IBM Infoprint Manager
Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.
Network Printer Resource Utility (NPRU)
NPRU will not support the Infoprint Color 1357.
TCP/IP Network Port Monitor Utility
This utility will not support the Infoprint Color 1357.
LPR Remote Printing Client Utility
This utility will not support the Infoprint Color 1357.
802.11g Wireless to Ethernet
Specifications
Model ACR-201-G
Standard IEEE 802.11g, 802.11g WPA-TKIP, WPA-PSK
Host Interface Ethernet, 802.3, RJ-45 receptacle
Frequency 2.4835 GHz (US and Europe)
RF Channels 11 channels (US, Canada)
13 channels (Europe, except France)
4 channels (France)
Transmission power 14 dBm at antenna input typical for 802.11g
16.2 dBm at antenna input typical for 802.11b
Receiver sensitivity -65dBm @ 54Mbps, -80sBm @11Mbps at 1e-5 BER
Typical
Antenna Dipole antenna with ~2dBi gain
Data Rate 1/ 2/ 5.5/ 6/ 9/ 11/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Modulation OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) DBPSK,
DQPSK, CCK (11b)
Link Distance ~1200 ft in open space
Network Types Support both the ad hoc mode and the
infrastructure mode
Data Encryption Support WPA-TKIP, WPA-PSK and 128/64-bit WEP
LED Indicators 4: Power, Transmission, Receiving,
Link/Ethernet-connection
Network Protocol TCP/IP, IPX/SPX, AppleTalk
Support
Printer Management Utilities
MarkVision Professional (provided on the printer CDs)
MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser. It provides IT administrators with real time device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.
The 802.11g Wireless to Ethernet acts as a wireless Ethernet bridge. When used with a Lexmark printer that supports MarkVision Professional management capabilities, the wireless bridge provides the same level of functionality as if the printer were connected to the network via a wired connection.
MFP Information / Compatibility
When used with a network-capable MFP, the 802.11g Wireless to Ethernet provides network capabilities equivalent to a MFP connected to a wired 10/100BaseTX Ethernet network.
Network Security
The 802.11g wireless to Ethernet supports the following wireless security methods and protocols:
- WPA-Personal-level security:
- TKIP
- Pre-Shared Key (PSK)
- WEP:
- 64-bit
- 128-bit
These security modes cannot be used in combination. For example, if a user selects WPA-personal, the user cannot enable WEP security features.
In addition to the wireless security methods, the 802.11g Wireless to Ethernet included with the printer or MFP provides the following access control methods that an be used in conjunction with any wireless security methods stated above:
- Device configuration password protection
- Restricted Server List
Operating System Support
- Workstation Operating Systems:
- Apple Mac OS 8.6-9.x (LPR printing)
- Apple Mac OS X.2 and above (Zero Configuration support)
- Windows 98SE, Me
- Windows NT 4.0(1)
- Windows 2000
- Windows XP
- Red Hat Linux 7.3, 8.0, 9.0(1)
- SuSE Linux 8.0, 8.1, 8.2(1)
- Server Operating Systems:
- Apple Mac OS X.2 Server and above
- Windows NT 4.0 Server(1)
- Windows 2000 Terminal Server
- Windows 2000 Server, Advanced Server
- Windows Server 2003
- IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(1)
- Virtually any platform supporting TCP/IP(1)
- Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
- Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(1)
- Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(1)
- Red Hat Linux 7.3, 8.0, 9.0(1)
- SuSE Linux 8.0, 8.1, 8.2(1)
Note: (1) May require initial configuration through Ad-hoc mode.
Printing Protocols
The 802.11g Wireless to Ethernet feature is compatible with all network protocols supported by the printer.
802.11g Wireless to USB
Network Security
The 802.11g wireless to USB supports the following wireless security methods and protocols:
- WPA-Personal:
- TKIP
- Pre-Shared Key (PSK)
- WEP:
- 64-bit
- 128-bit
These security modes cannot be used in combination. For example, if a user selects WEP, the WPA-Personal cannot be enabled. In addition to the wireless security methods, the print server provides the following access control methods:
- Device configuration password protection
- Restricted Server List
Operating System Support
- Workstation Operating Systems:
- Apple Mac OS 8.6, 9.x (LPR printing)
- Apple Mac OS X 10.2 and above (Zero Configuration support)
- Windows 98SE, Me
- Windows NT 4.0(2)
- Windows 2000
- Windows XP
- Red Hat Linux 7.3, 8.0, 9.0(2)
- SuSE Linux 8.0, 8.1, 8.2(2)
- Server Operating Systems:
- Apple Mac OS X.2 Server and above
- Windows NT 4.0 Server(2)
- Windows 2000 Terminal Server
- Windows 2000 Server, Advanced Server
- Windows Server 2003
- IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(2)
- Virtually any platform supporting TCP/IP(2)
- Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
- Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(2)
- Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(2)
- Red Hat Linux 7.3, 8.0, 9.0(2)
- SuSE Linux 8.0, 8.1, 8.2(2)
Note: (2) May require initial configuration through Ad-hoc mode.
Printing Protocols
The following print protocols are supported:
- Direct IP (TCP 9100)
- LPR/LPD (TCP 515)
- IPP (Internet Printing Protocol) (TCP 631 or TCP 80)
- HBN (Host Based Networking)
Address Management Protocols
The following address management protocols are supported:
- Auto-IP
- DHCP
- DDNS
- mDNS
- ARP
- WINS
Device Management Protocols
The following device management protocols are supported:
- Zero Configuration
- HTTP
- ICMP
- SNMP
- HCP Host Configuration Protocol
- Telnet 9000
File Transfer Protocols
The following file transfer protocols are supported:
- FTP (printing, UCF file configuration)
- TFTP (printing, code updating)
IPDS is not supported through the USB port.
Network Management
These features provide management capabilities primarily via its embedded web server. Basic network management is also provided using traditional TCP/IP functions.
Basic Management
The following basic management applications are supported:
- Ping
- Finger
- Telnet 9000
- Discovery Utility
Advanced Management
These features are designed to allow the user to learn network status and configure network settings remotely. The printer server support
- the following management methods:
- Embedded Web Server
- SNMP
- Universal Configuration Files (UCF)
Embedded Web Server Function
Supported Web Browsers
- Microsoft Internet Explorer 5.0, 6.0 and newer
- Netscape 4.0, 7.0 and newer
- Safari 1.0 and newer
Primary Web Server Functions
The following items are available regardless of the status of the USB-attached device:
- Name and picture of print server
- Wireless status (connect speed, signal strength, Access Point)
- Print Server Setup Page
- Configuration of all general adapter settings (LAA, Contact Name, Locations, Etc.)
- Configuration of all TCP/IP settings
- Configuration of password
- Links and Index section
- Link to Troubleshooting
- Applet to flash update
Certifications
802.11g wireless to Ethernet
These features meet the following standards and has obtained the appropriate approvals.
- UL 60950-1: Safety of Information Technology Equipment
- Code of Federal Regulations 47, FCC Part 15 (Class B)
- FCC Part 15 Subpart C Section 15.247
- FCC Declaration of Conformity (DoC) Mark on the label
- Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
- Industry Canada RSS-210
- UL 60950 3rd Edition
802.11g wireless to USB
These features meet the following standards and has obtained the appropriate approvals.
- Code of Federal Regulations 47, FCC Part 15 (Class B)
- FCC Part 15 Subpart C Section 15.247
- FCC Declaration of Conformity (DoC) Mark on the label
- Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
- Industry Canada RSS-210
- Underwriters Laboratories, Inc., UL 60950-1
Physical Specifications
Dimensions
Width Depth Height Weight(1)
--------- --------- --------- --------
Base 695.0 mm 655.0 mm 512.0 mm 80.5 Kg
Printer (27.4 in) (25.8 in) (20.2 in) (177 lb)
Network 695.0 mm 655.0 mm 641.0 mm 99.0 Kg
Printer (27.4 in) (25.8 in) (25.2 in) (218 lb)
Note: (1) Weights for low-voltage and high-voltage models are the same.
Recommended Clearances
Left Right(1) Front Back Top
-------- ------ ------- -------- ------
330.0 mm 152 mm 660 mm 127.8 mm 229 mm
Printer (13 in) (6 in) (26 in) (5 in) (9 in)
Note: (1) Without duplex, 13 in.; with duplex, and 30 in. with HCF.
Operating Environment
- Operating Temperature: 10C to 33C (50F to 91F)
- Powered Off Temperature: 10.0C to 43.3C (50F to 110F)
- Relative Humidity: 20% to 80%
- Altitude: 2,300 meters (7,545 feet)
- Atmospheric: 74.6 kPa Ambient Operating
- Ambient Operating Environment: 15.0 to 27.0C (59 to 80F) and 8% to 80% RH
- Cartridges: -40 to 43.3C (-40 to 110F)
Electrical Specifications
Low-Voltage Models
- 110 - 127 V ac at 50/60 Hz +/-3 Hz, 99 - 135 V ac extreme
High-Voltage Models
- 220 - 240 V ac at 50/60 Hz +/-3 Hz, 198 - 254 V ac extreme
Power Consumption & Thermal Output
Printing States 1357 Base 1357 n
------------------------------ ---------- ---------
Average Power While Printing
- Base Printer 400 watts 400 watts
Average Power While Idle
- Power Saver ON 13 watts 14 watts
- Power Saver OFF 125 watts 125 watts
Maximum Current While Printing
- 110 Volts 13.4 amps 13.4 amps
- 220 Volts 4.3 amps 4.3 amps
Note: Using a 220 V ac to 110 V ac power converter with the low-voltage model is not recommended.
Note: All models are Energy Star compliant.
Acoustics
All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Meter Average Sound Pressure, dBa
- 1-meter Average Sound Pressure:
- 2400IQ printing: 58 dBa
- Idle (Standby): 48 dBa
Mach Feature Part
Type Model Number Number Description UPC
---- ----- ------- ------- ------------------------------ ---------------
4928 004 75P4316 Infoprint Color 1357 NA (LV) 0-87944-91065-7
4928 n04 75P4317 Infoprint Color 1357 n NA (LV) 0-87944-91066-4
75P4299 Card for IPDS & SCS/TNe 0-87944-89054-6
75P4393 ImageQuick Card 0-87944-91582-9
75P4394 Bar Code Card 0-87944-91583-6
75P5008 20+GB ISP Hard Disk w/Adapter 0-87944-95668-6
ServicePacs
Machine Electronic
Type Model Description Part Number
------- ------- ------------------------------ -----------
4928 004,n04 SVCPAC PTR 2YR IOR 9X5/NXTDAY 45P7958
4928 004,n04 SVCPAC PTR 3YR IOR 9X5/NXTDAY 45P7959
4928 004,n04 SVCPAC PTR 4YR IOR 9X5/NXTDAY 45P7960
4928 004,n04 SVCPAC PTR 5YR IOR 9X5/NXTDAY 45P7961
4928 004,n04 SVCPAC PTR 1YR IOR 24X7/SAMDAY 45P7962
4928 004,n04 SVCPAC PTR 2YR IOR 24X7/SAMDAY 45P7963
4928 004,n04 SVCPAC PTR 3YR IOR 24X7/SAMDAY 45P7964
4928 004,n04 SVCPAC PTR 4YR IOR 24X7/SAMDAY 45P7965
4928 004,n04 SVCPAC PTR 5YR IOR 24X7/SAMDAY 45P7966
4032 4 MB flash SIMM
4034 8 MB flash SIMM
4036 16 MB flash SIMM
4120 Token-Ring
4121 Token-Ring-3 port
4132 External Serial Adapter
4133 RS-232-C Serial/Parallel 1284-C
4135 Parallel 1284 C-B Adapter
4136 Parallel Card and 1284-C Cable
4137 Parallel Card and C-B Adapter
4141 Twinax/Coax Adapter for SCS
4161 Ethernet 10BaseT/2
4162 Ethernet 10/100BaseTX
4163 Ethernet 10/100BaseTX-1 port
4164 10/100BaseTX-3 port
4165 Ethernet 10/100TX/10Base2-1 pt
4170 802.11b Wireless Adapter
4180 10 ft. Parallel Cable
4181 20 ft. Parallel Cable
4182 Parallel 1284-C Cable 6 ft.
4183 50 ft. Serial Cable
4184 2-meter USB Cable
4330 20+GB ISP Hard Disk w/Adapter
4364 64 MB memory DIMM
4390 128 MB memory DIMM
4391 256 MB memory DIMM
4402 Duplex Unit
4501 550-Sheet Heavy Media Tray
4505 550-Sheet Drawer
4506 2x550-Sheet Drawer with Base
4520 High Capacity Feeder
4530 Printer Cabinet
4531 Printer Base
4824 Card for IPDS & SCS/TNe
4825 ImageQuick Card
4826 Bar Code Card
4871 Optra Forms Software
4872 Optra Forms Director Software
4874 Optra Forms 4 MB Flash DIMM
4875 Optra Forms 8 MB Flash DIMM
4876 Optra Forms 16 MB Flash DIMM
4877 Optra Forms Hard Disk w/Adapt
4878 Optra Forms 2-Key Security
4879 Optra Forms 3-Key Security
4880 Optra Forms Manager
Printer Features
Note: All printer features are customer installable. FC = feature code.
Input, Output and Other Media Features
(#4402) Duplex Unit
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This option offers two-sided printing capability.
(#4501) Heavy Media Tray
- Minimum required = 0
- Maximum allowed = No maximum
- Prerequisite = None
- Co-requisite = None
This tray is intended for special media, such as transparencies, labels and glossy paper. For such media, this tray may be used in place of the standard tray shipped with the 550-sheet drawer.
Limitations:
- This tray does not support paper with weights below 75 gsm (20 lb.).
- This tray is only supported as tray 1 (highest/top drawer location).
(#4505, P/N 53P9377) 550-Sheet Drawer
- Minimum required = 0
- Maximum allowed = 3 if base models or 2 if network models
- Prerequisite = None
- Co-requisite = None
This input option can be installed beneath the printer to offer an added input source which holds approximately 550 sheets of 20 lb. paper.
(#4506) 2x550-Sheet Drawer with Base
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This input option includes two 550-sheet drawers and the printer base. It raised the printer to the correct height for the High-Capacity Feeder and/or Finisher to be installed.
(#4520) High-Capacity Feeder
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = Printer Cabinet (FC 4530) or 2x550-Sheet Drawer with Base (FC 4506) or two 550-Sheet Drawers (FC 4505) and Printer Base (FC 4531)
- Co-requisite = None
This input option provides an additional input source which holds approximately 3,000 sheets of 20 lb. A4/Letter paper. It does not support cardstock, transparencies, label or envelopes.
This features requires the printer to be at a certain height, see prerequisites.
(#4530, P/N 53P9391) Printer Cabinet
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This option attaches below the printer and raises the printer to the correct height for the High-Capacity Feeder and/or Finisher to be installed.
(#4531, P/N 53P9392) Printer Base
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This option attaches below the printer and when used with two optional 550-sheet drawers, it raises the printer to the correct height for the High-Capacity Feeder and/or Finisher to be installed.
(#4621) Staple/Punch Finisher (3 hole)
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = Printer Cabinet (FC 4530) or 2x550-Sheet Drawer with Base (FC 4506) or two 550-Sheet Drawers (FC 4505) and Printer Base (FC 4531)
- Co-requisite = None
This optional finisher has two output bins with bin full and empty sensing (face down bin only) and supports stapling, hole punching and offset stacking. The finisher installed on the side of the printer. This version of the finisher comes with a 3 hole punch (letter).
Total capacity for the finisher is 1,100 sheets and with 100 sheets for the face up bin and 1,000 sheets for the face down bin. The face up bin on the finisher takes the place of the standard face up bin on the printer.
Stapled jobs go to the face down bin only. Maximum stapled set is 30 sheets (20 lb). Punched jobs can go to either output bin. Offset jobs go to the face down bin only.
Memory and Flash Memory Features
The Infoprint Color 1357 has two slots for memory and flash memory features. A maximum of 512 MB of memory and 32 MB of flash memory is supported.
Only one flash memory feature is allowed. If more than one flash feature is installed, the feature with the largest capacity is used. If a flash feature and an Optra Forms flash feature are both installed, the Optra Forms flash feature is used.
The memory features for the printer include:
(#4032) 4 MB Flash DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
(#4034) 8 MB Flash DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
(#4036) 16 MB Flash DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
If larger storage is required, an optional hard disk feature is also available.
(#4330) 20+GB Hard Disk with Adapter
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
The hard disk with adapter feature is required for a hard disk support. The adapter plugs into a disk interface slot and does not take up a memory or interface slot.
(#4364, P/N 53P7604) 64 MB Memory DIMM
- Minimum required = 0
- Maximum allowed = 2
- Prerequisite = None
- Co-requisite = None
(#4390, P/N 53P7605) 128 MB Memory DIMM
- Minimum required = 0
- Maximum allowed = 2
- Prerequisite = None
- Co-requisite = None
(#4391) 256 MB Memory DIMM
- Minimum required = 0
- Maximum allowed = 2
- Prerequisite = None
- Co-requisite = None
The flash memory features for the printer include:
Internal Local Connection Features
In addition to the standard USB port for all models and standard parallel port on the base models, each Infoprint Color 1357 model has one interface slot that can be used for optional network connections or local connections.
The following local connection options are supported:
(#4132, P/N 28P1845) External Serial Adapter
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = base printer model (001/002) or RS 232-C Serial/Parallel 1284 C card (FC 4133)
- Co-requisite = None
This adapter is installed on the printer's parallel port and receives its power through the parallel port. It utilizes a standard 25-pin D-shell females connector and supports baud rates up to 19,200 bps for RS-232C or 38,400 bps for RS-422.
(#4133) RS 232-C Serial/Parallel 1284 C Card
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This card provides an RS 232-C serial port and 1284-C parallel port.
(#4135) Parallel 1284 C-B Adapter
- Minimum required = 0
- Maximum allowed = No maximum
- Prerequisite = None
- Co-requisite = None
This adapter allows an RS-232C Serial/Parallel port with a type C connector (1284-C) to accept a cable with a type B connector (1284-B).
(#4136) Parallel Card and 1284-C Cable
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This feature includes both the RS-232C Serial/Parallel 1284-C Interface Card and a Parallel 1284-C 6-foot cable.
(#4137) Parallel Card and C-B Adapter
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This feature includes both the Parallel 1284 C-B Adapter (FC 4135) and the RS-232C Serial/Parallel 1284-C Interface Card (FC 4133).
Cable Features
(#4180, P/N 28P1871) 10 Ft. Parallel Cable
- Minimum required = 0
- Maximum allowed = No maximum
- Prerequisite = None
- Co-requisite = None
For parallel attachment, this cable is recommended for ten feet or less and may be ordered by the customer.
(#4181) 20 Ft. Parallel Cable
- Minimum required = 0
- Maximum allowed = No maximum
- Prerequisite = None
- Co-requisite = None
For parallel attachment, this cable is recommended for twenty feet or less and may be ordered by the customer.
(#4182) Parallel 1284-C Cable 6 Ft.
- Minimum required = 0
- Maximum allowed = No maximum
- Prerequisite = None
- Co-requisite = None
For personal Computers and UNIX Workstations, the recommended PC parallel printer cable is required for attachment of the Infoprint Color 1128. It may be ordered by the customer.
(#4183) 50 Ft. Serial Cable
- Minimum required = 0
- Maximum allowed = No maximum
- Prerequisite = None
- Co-requisite = None
For serial attachment, this cable is recommended for fifty feet or less and may be ordered by the customer.
(#4184, P/N 28P1875) 2-meter USB Cable
- Minimum required = 0
- Maximum allowed = No maximum
- Prerequisite = None
- Co-requisite = None
For USB attachment, this USB cable is recommended and may be ordered by ordered by the customer.
Network Connection Features
Network cards plug into the one interface slot. Only card is allowed per network protocol. That is, only one Ethernet and only one Token-Ring card. Any of the non base models have Ethernet onboard and cannot have a 10/100BaseTX card installed. These models can have the 10Base/2 card installed but it will disable the onboard Ethernet.
Network Cards for Internal Print Server Features
Infoprint Color 1357 network models come standard with Fast Ethernet 10/100BaseTx built-in to the controller board. Additionally, Infoprint Color 1357 supports the following MarkNet** N2000 Series Internal Print Servers:
(#4120) Token Ring attachment
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
(#4161) Ethernet 10BaseT/2
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
- Conflict = This feature will disable the onboard ethernet on the netwoek printer models, n01 and n02
(#4162) Ethernet 10BaseT/100BaseTX
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
- Conflict = This feature cannot be installed in the network printer models
(#4170) 802.11b Wireless Adapter
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = network model or Ethernet feature, Co-requisite =none
This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11b wireless standard. This standard operates at speeds of up to 11 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building contruction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with dfont-weight: normal;liistance. The wireless LAN feature is compliant with any WiFi-compliant device.
The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.
Network Cards for External Print Servers Features
These external features plug into a parallel or serial port on the printer. They cannot plug into Parallel 1284 C-B Adapter (FC 4135) or Parallel Card and C-B Adapter (FC 4137). They provide MarkNet X2000 Series external network connections:
(#4171) Ethernet to USB Adapter
- Minimum required: 0
- Maximum allowed: 1
- Prerequisite: USB port
- Co-requisite: None
This adapter attaches to the printer's USB port and has one 10/100BaseTX RJ-45 port for connection to the network.
Note: This features is customer installable.
(#4121, P/N 28P1836) Token Ring-3 port
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
(#4163) Ethernet 10BaseT/100BaseTX-1 port
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
(#4164) Ethernet 10BaseT/100BaseTX-3 port
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
(#4165) Ethernet 10/100BaseTX/10Base2-1 port
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
MarkNet Compatibility
The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:
- TCP/IP
- Novell (IPX/SPX including NetWare Directory Services)
- AppleTalk**
- LexLink** (DLC/LLC)
The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:
- IPP: Internet Printing Protocol
- SLP: Service Location Protocol
- NTP: Network Timing Protocol
The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.
The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.
IBM Host Connection Features
iSeries (formerly AS/400)
IBM iSeries with OS/400 V5R1 or later utilizing OS/400 Host Print Transform. Use Manufacturer Type and Model (MFRTYPMDL) of LEXOPTRAT** (in OS/400 Version 4 Release 2 or later), LEXOPTRAS**, or LEXOPTRA**.
(#4141, P/N 28P1842) Coax/Twinax Adapter for SCS
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This card plugs into the expansion slots. Notes on the Coax/Twinax Adapter for SCS are below:
- Coax/Twinax Adapter for SCS is FCC class A only
- Microcode updates are available from the IBM Web site at:
- www.ibm.com/printers
- When the printer is emulating an IBM printer, the function supported depends on the IBM host software.
- The SCS adapter uses PCL(fonts from the printer for IBM host fonts. The default resolution of the printer determines the resolution of the SCS data and its PCL fonts.
For Direct Twinaxial Attachment
Hardware Compatibility
When the printer contains the optional Coax/Twinax Adapter for SCS with a twinaxial cable, the printer attaches to the following IBM hardware:
- iSeries servers and e-systems
- iSeries Twinaxial Workstation Controllers
- iSeries Advanced System/36 Twinaxial Workstation Controller
- 5494 Remote Control Unit
- 5394 Remote Control Unit
Software Compatibility
The IBM host software requirements for SCS printing when the printer is emulating an IBM 3812 Model 1, 5219 D01/D02, 4214-02, 5225-01, 5224-01 or 5256-03 printer are as follows:
- iSeries OS/400 (All releases)
- iSeries OS/400 V3R6 with System Support Program (SSP) Release 7.5 or later
- iSeries SSP Release 7.1 or later
For Direct Coaxial Attachment - Hardware Compatibility
When the printer contains the optional Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:
- IBM 3174 Control Unit
- ES/9000 Work Station Subsystem Controller
- 3174 compatible control units
Software Compatibility
The IBM host software requirements for DSC/DSE or SCS printing when the printer is emulating an IBM 3812-01, 4224-01, 3287, 3268 or 4214 printer are as follows:
- Any application or host software that generates the SCS or DSC/DSE data streams for one of the emulated printers such as:
- JES/328X Print Facility V2R2 or later
- Graphical Data Display Manager (GDDM) V2.3
- RSCS V3.2 or later
- VTAM
- DisplayWrite/370 V1R2.1 or V2R1 or later (MVS/CICS or VSE/CICS)
The SCS data stream is supported by IBM MVS/CICS and VSE/CICS.
For Direct Coaxial Attachment - Software Compatibility
The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:
- Any application or host software that generates the AFP/IPDS data stream for one of the emulated printers such as:
- PSF/VSE V2.2.1
- PSF/VM V2.1.1 (with maintenance)
- PSF for OS/390
- PSF/400
- Infoprint Manager
- GDDM V2.3 with APARs
- RSCS V3.2 or later
Optra Forms Features
(#4871) Optra Forms Software Feature
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = Optra Forms flash or Hard Disk
Optra Forms uses 'up-to-the-minute' data directly from customer applications and combines it with printer resident electronic forms with text and graphics to produce (print) completed forms such as invoices, statements, pick slips, labels, purchase orders or confirmations with bar codes or other specialized graphics on a variety of paper types. For Optra Forms:
For Optra Forms:
- No Server-based or host based merge program or software is required.
- Use with virtually any ASCII text print file from any platform, mainframe, iSeries, UNIX or workstation, over Coax, Twinax, parallel, serial or LAN (TCP/IP).
- Generally, make no changes to database applications.
- Print different forms at different locations from the same database, possibly using the same data.
- Update forms quickly and easily (globally) over the LAN
- Provides support for bar codes, color, duplex, multipage form sets and more.
- Store forms as efficient, compact forms in flash.
Optra Forms is supported by the Infoprint Color 1357 printers using the Optra Forms 2, 4, 8 and 16MB Flash DIMM's or Optra Forms Hard Disk.
(#4872) Optra Forms Director Feature
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = Optra Forms Software (FC 4871)
- Co-requisite = None
Optra Forms Director is a Windows NT or Windows 2000 server-based program. Using additional host software (AS/400, UNIX or Mainframe), the host application sends a print spool file to a Windows NT or 2000 print queue. Optra Forms Director service automatically pareses the print spool file into single or multiple print jobs using Microsoft Visual Basic Script or JScript methods and Named Pipes.
The spool file which may contain many individual documents is customized by separating it into individual jobs or by adding data or particular commands to the individual documents that are then sent to IP, LPR, or Windows printer destinations. The additional data or commands may be to staple, separate documents with a cover page, copy and collate, print on both sides, offset stack, fax, or hole punch each individual job. Print jobs are customized and distributed electronically to network printers automatically without making any changes to host applications.
Optra Forms is supported on the Infoprint Color 1357 using a Optra Forms flash or Hard Disk. Only one Optra Forms flash DIMM is supported. If a Flash DIMM and Optra Forms Flash DIMM are both installed, the Optra Forms DIMM will be used.
(#4874) Optra Forms 4 MB Flash DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = Optra Forms Software
(#4875) Optra Forms 8 MB Flash DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = Optra Forms Software
(#4876) Optra Forms 16 MB Flash DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = Optra Forms Software
(#4877) Optra Forms 5+ GB Hard Disk with Adapter
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = Optra Forms Software
- Conflict = This feature is mutually exclusive with the 5+GB Hard Disk with Adapter (FC 4329)
(#4878) Optra Forms 2-Key Security
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = Serial Port & Optra Forms SW
- Co-requisite = None
- Conflict = This feature is mutually exclusive with the 3-key security feature (FC 4879)
For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 3-key security feature (FC 4879).
(#4879) Optra Forms 3-Key Security
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = Serial Port & Optra Forms SW
- Co-requisite = None
- Conflict = This feature is mutually exclusive with the 2-key security feature (FC 4878)
For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 2-key security feature (FC 4878).
(#4880) Optra Forms Manager
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = Optra Forms Flash (FCs 4874, 4875, 4876) or Optra Forms Hard Disk w/Adapter (FC 4877) and Optra Forms Software (FC 4871)
- Co-requisite = None
Optra Forms Manager enables administrators to manage and distribute forms to multiple printers over a TCP/IP network. This includes loading new forms and updating existing forms on an Optra Forms printer over a TCP/IP network.
Optra Forms Manager lets you:
- Keep a master copy of all forms on a PC
- Update all printers at same time over TCP/IP after a printer query for its resident Styles and creation dates. Only matching Styles (flash files) with different creation dates are downloaded to the printer over TCP/IP.
- Import a printer IP address txt file (also from MarkVision**) registry)
- Select the printers to which the Download or Update operations apply.
- Run the update as a batch job
- Create a log file to know successful printer updates
- Create a Style report and save it to a comma separated variable (CSV) file giving better knowledge about the forms in all the printer. The Style report includes the printer listed by their IP address or DNS name and a description, Style names and their versions and the Optra Forms Merge program version in each printer.
- Create PDF files (using Acrobat Distiller) of the data merged with forms after retrieving archive data files from the Optra Forms hard disk. The PDF file can be saved as a softcopy archive file. * With an Optra Forms hard disk, create a job buffering partition or change its size. After the disk is formatted and partitioned, the Optra Forms Merge program is written to the disk.
To use Optra Forms Manager, the Optra Forms printers must be connected to a TCP/IP network. The LPR protocol is also supported to download forms.
Optra Forms Manager is now available on a separate CD for those customers who want to use this program to more effectively manage their Optra Forms printers over TCP/IP. Other third party service providers can also manage their customers forms more cost effectively.
Font DIMMs
These features plug into the two flash memory/application solutions slots. The three font DIMM features are mutually exclusive.
(#4810) Japanese Font DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
The feature contains Japanese fonts.
(#4811) Simplified Chinese Font DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
The feature contains Simplified Chinese fonts.
(#4812) Traditional Chinese Font DIMM
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
The feature contains Traditional Chinese fonts.
Applications Solution Features
These features plug into the two flash memory/application solutions slots. These three features are mutually exclusive.
(#4825, P/N 75P4393) ImageQuickTM Card Feature
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
The ImageQuick Option Card enables the Infoprint 1332/1352 laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.
(#4826, P/N 75P4394) Bar Code Card Feature
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
The Bar Code Option Card enables the Infoprint 1332/1352 laser printers to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Bar Code Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM( (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.
IBM Environment Solution Features
(#4824) Card for IPDS and SCS/TNe Feature
- Minimum required = 0
- Maximum allowed = 1
- Prerequisite = None
- Co-requisite = None
This feature is installed in the flash memory/applications solutions slots.
The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM mainframe and iSeries computers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers or over distributed SNA networks using the Coax/Twinax Adapter for SCS with a coaxial or twinaxial cable connected printer.
Detailed information on this feature is provided below. This feature is installed in the optional firmware slot. It supports monochrome printing only.
IPDS is only supported for Single Byte Character Set and does not support Double Byte Character Set.
Differences Between These Printer's IPDS and Previous IBM Printers
These workgroup printers have a different level IPDS support than the previous IBM workgroup printers. Some key differences are:
- For emulation, the Infoprint 11xx printers emulate the 4028, 4312, 4317, 4324, 3812/16, and 3112/16. These are LF1 emulations ONLY.
- Infoprint Color 1357 printer does not support "Manage IPDS Dialog".
Details on Card for IPDS and SCS/TNe Emulation
Product Overview:
- The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident Web server, a browser and the printer's IP address.
- For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.
- For Infoprint Color 1357 IPDS emulation, staple and offset stacking for the finisher are supported.
- For Infoprint and IPDS emulation, offset stacking is supported in the printer's standard bin and the finisher bin. Stapling is supported for the finisher.
These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM iSeries applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).
IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:
- PDF417 2D bar code, Data Matrix, MaxiCode 2D bar codes
- Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.
- Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
- No changes to host applications.
- Supports emulation of common IBM IPDS and SCS printers.
- Additional remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.
- One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or iSeries documents (AFP/IPDS, SCS).
With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an iSeries or System/390 computer.
With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or iSeries host printer. See the compatibility section for details.
With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an iSeries or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the compatibility section for more details.
For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.
The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.
The IPDS emulation supports the IPDS data and resource towers. SBCS fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.
The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.
Fonts
AFP/IPDS Font and Typestyle Support:
The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).
The following languages are supported:
- Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English
- Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian
- Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian
- Greek
- Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.
The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.
The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.
The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.
The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.
Font Capture
Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.
PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.
Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.
If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.
The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.
iSeries
On the iSeries, Font capture is supported by OS/400 V5R1 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG/CHGPSFCFG), set FNTCAPTURE (*YES).
Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Verify that *YES is specified for the Font Capture attribute. Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.
For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.
Mainframe (OS/390 or z/OS)
Font capture is supported by PSF for OS/390 or z/OS. Use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.
Font capture is supported by PSF for OS/390 or z/OS 2.2.1 with APAR DY43969. With PSF for OS/390 or z/OS, use APSRMARK to mark eligible fonts if they are not already marked.
SCS Font and Typestyle Support
The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.
On the iSeries, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.
A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.
These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).
Compatibility
For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.
Notes:
- Microcode updates and User's Guides are available from the IBM Web site.
- See the appropriate User's Guide for configuration instructions.
- When the printer is emulating an IBM printer, the function supported depends on the IBM host software.
For Direct Network Attachment - Hardware Compatibility
When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:
- Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
- MarkNet** N2000 Series print servers
- MarkNet X2000 Series print servers (AFP/IPDS only)
- MarkNet Pro print servers (AFP/IPDS only)
The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.
Notes:
- MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.
- For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.
- Any MarkNet X2000 microcode level provides AFP/IPDS support only.
- For IPDS printing, a minimum of 16MB of printer memory is required.
Software Compatibility for AFP/IPDS Printing Over TCP/IP
The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:
- OS/400 V5R1 or later through PSF/400(1).
Note: (1) With OS/400 V5R1, to print IPDS over TCP/IP through PSF/400.
Software Compatibility for SCS LU1 Printing Over TCP/IP
The IBM iSeries software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:
- OS/400 V5R1 or later with all PTFs applied
Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same.
The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:
- IBM Communications Server (CS) for OS/390 or z/OS Version 2 Release 5 or later on ESA systems
Note: All appropriate APARs must be applied.
- TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)
- TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature
- Using Cisco 7500 Series Routers
(P/N 75P6859) Card for IPDS & SCS/TNe (Infoprint Color 1357)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This feature is installed in the flash memory/applications solutions slots.
The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM mainframe and iSeries computers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers
Color Printing
This affordable Card for IPDS and SCS/TNe provides configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers.
- For IPDS, full color printing including IOCA Function Set 45 has been added. Printing of documents and images in full color is controlled by a Color Mode IPDS menu setting.
- For IPDS, N-up and N-up Explicit Page Placement support has been added. Print 1 to 4 partitions per side or up to 8 pages per sheet when printing duplex pages.
- For IPDS, Quick Response (QR) 2D barcodes are now supported in the bar code tower.
- For IPDS, print DBCS downloaded outline and bitmap fonts from the host. Simplified Chinese, Traditional Chinese, Korean and Japanese can be downloaded and printed from the host
(P/N 75P6446) Barcode Card Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The Barcode Option Card enables the Infoprint 1357 to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Barcode Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM( (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.
(P/N 75P6444) ImageQuickTM Card Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The ImageQuick Option Card enables the Infoprint 1357 laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.
(P/N 75P6857) 802.11g Wireless to Ethernet
- Minimum required = 0, maximum allowed = 1,
- Prerequisite = network model or model with internal Ethernet card, Co-requisite = none
The IBM 802.11g Wireless to Ethernet allows customers to quickly place Ethernet-capable workgroup printers or multifunction priners (MFPs) on a wireless network. This wireless print adapter is a bridge that uses the existing Ethernet port of the printer or MFP, which in turn provides a wireless solution that is flexible and easy to use. It supports both 802.11b and 802.11g wireless standards. This feature includes one Ethernet (RJ-45) port for connection to the printer.
Very few steps are required to configure the 802.11g adapter. A setup utility is not needed, as the setup is done using your Windows-based browser. The 802.11g Wireless Print Adapter is also supported in a Mac OS X environment using the printer or MFP Zero Configuration networking, that allows automatic printer discovery to make it easier for users to locate devices on a network.
By using the existing Ethernet on the printer or MFP, the adapter supports all the networking capabilities the internal Ethernet card provides. This includes TCP/IP printing support (including port 9100 printing) and printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows the adapter to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.
Since the 802.11g wireless to Ethernet is transparent to MarkVision Professional, all mass management capabilities available in printers and MFPs are available to the administrator when using the 802.11g wireless to Ethernet. In addition to these capabilities, the device includes an embedded web server.
An embedded web server allows administrators to easily manage the wireless adapter through a standard web browser. While settings on the adapter are optimized for most environments, through a web browser an administrator can easily make changes to the device.
(P/N 75P6854) 802.11g Wireless to USB
- Minimum required = 0, maximum allowed = 1,
- Prerequisite = none, Co-requisite = none
The 802.11g Wireless to USB is a Wi-Fi Certified device supporting both 802.11b and 802.11g networking technologies and offers a USB 2.0 Full Speed port to connect to the printer. Its WPA personal security offers a high level of protection for value conscious consumers.
Setup is a breeze with this print server. In Microsoft Windows environments (98SE and above), it offers an intuitive setup wizard to guide the user through installation of most printers.
The 802.11g Wireless to USB also provides an easy installation for Mac OS X environments using Zero Configuration networking which allows automatic printer discovery, making it easier for users to locate devices on a network.
By offering TCP printing support (including port 9100 printing), this feature provides network printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows this feature to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.
An embedded web server allows administrators to easily manage the print server through a standard web browser. While settings on the print server are optimized for most environments, through a web browser an administrator can easily make changes to the device. Customizable settings allow the network administrator to get the most from this feature.
Trademarks
(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
IBM Corporation 2006.