Genicom 3860 & 3880
Technology: Serial impact dot matrix
Print Head: 18-pin
speed cps | |||
3880 DP |
| ||
3880 LQ | center>183 | ||
3860 DP | |||
3860 LQ |
Fonts: Gothic, Courier, Wide Gothic, Gothic Italic, Courier Italic, Micro-Gothic, OCR-A, OCR-B
Bar Codes:Codes: Interleaved 2 of 5, Bidirectional 2 of 5, Matrix 2 of 5, Industrial 2 of 5, Code 3 of 9, EAN-2, EAN-5, EAN-8, EAN-13, Code 11, Code BCD, Codabar a/t, Codabar b/n, Codabar c/*, Codabar d/e, UPC-A, UPC-E, UPC-2, UPC-5, Code 93, Code 128 (A-B-C), MSI, POSTNET
Character Sets:DEC VT100 Line Draw; IBM Set I, II, and All Character Set; 18 international character set substitution; IBM Code Page - 437, 850, 852, 863; ISO 8859-1, -2, -3, -4, -9; Roman 8; Mazowia (Poland)
Print Modes:Proportional, compressed, shadow, double strike, underline, expanded (2 to 8 times), superscript, subscript, oversize (2 to 187 times)
Head Slew:75 ips maximum
LF Interval: 35 msec at 6 lpi
Character Spacing: 10, 12, 13, 15, 16.7, 17.1, and 20 cpi, plus program selectable
Line Spacing: 3, 4, 6, and 8 lpi, plus n/144 in. program selectable
Print Line: 13.6 in.
Dot Graphic (dpi): 60 to 400H x 72 to 144V (emulation dependent); supports DEC Sixel Graphics
Print Control
Margins: Left and right any position
Horizontal Tabs: 32*
Vertical Tabs: 12*
Print Position: Absolute and relative HxV head position*
Formats:4 user-defined forms
Auto-Perf Skip:Selectable auto-perf skip
*Emulation dependent
Flexible Paper Handling
Paper Handling:Paper parking, auto top of form, zero-inch tear-off, paper out sensor, auto forms thickness adjustment, and paper motion sensor
Paper Drive: 6-pin push tractors
Paper Dimensions: Continuous forms 3" to 16" W x 22" L maximum
Number of Copies: Original plus 6 in front/bottom path; original plus 5 in rear paper path
Max. Forms Thickness: 0.025 in.
Paper Slew: 5/15 ips
Emulations
ANSI X3.64, GENICOM 3410, Epson FX286e, IBM Proprinter III XL, IBM-GP, DEC LA210
Interfaces and Connectivity
CENTRONICS parallel - 36-pin Amphenol; speed: 30Kbytes/sec
EIA/TIA-232 (RS-232) serial - 25-pin type DB female; speeds: 110, 300, 600, 1200, 2400, 4800, 9600, 19200 baud
Auto interface switching between serial and parallel interfaces
Input Buffer: 64K
Options: RS-422, IBM Coax/Twinax, TCP/IP, Novell
Physical
Size (HxWxD): 12.1 x 26.9 x 13.9 in. (296 x 683 x 353 mm)
Weight: 52 lbs (23.6 kg)
Shipping Weight: 63 lbs (28.5 kg)
Acoustics: Less than 60 dBa
Operating Environment
Voltage: 115 or 230 15% autosensing; 50 or 60 Hz 2 Hz
Power Input:
Standby: 35 watts (120 BTU/Hr)
Printing: 130 watts (433 BTU/Hr)
Temperature: 50 to 104 F (10 to 40 C)
Humidity: 20% to 90% relative
Reliability MTBF: 10,000 hours @ 25% duty cycle
Workload:Up to 35,000 pages per month
MTTR: 30 min. by a qualified technician
Ribbon Life: Standard Life: 15 million draft characters; Extended Life: 25 million draft characters.
Ribbon
Type: Cartridge, clean hands, nylon fabric
Life:15 million draft characters
Accessories and Upgrades
Accessories and Upgrades, Pedestal, Pedestal forms rack, Pedestal paper catch tray, Paper basket, Output paper rack, Ethernet 10/100BaseT, IBM coax SCS or IPDS, IBM twinax SCS or IPDS.