IBM Infoprint 6700-M Thermal Label Printer Family

The IBM 5403 InfoPrint 6700 Model M40 is a compact, midrange thermal printer with a nominal print width of four inches. This model offers a print resolution of 203 or 305 dpi and maximum print speeds up to 10 ips. The primary applications are for the production of RFID tags, bar codes, and graphics on labels and tags in an industrial environment.

Highlights

The InfoPrint 6700 Model M40 midrange thermal printer offers:

A compact, light industrial printer for high-quality bar codes and crisp graphics for labels and tags
Radio frequency identification (RFID) capability for encoding and reading EPC global Class 1 Gen 2 tags
High-quality, high-performance thermal printing in a 4-inch width
High-resolution printhead for sharp 203 or 305 dots per inch (dpi) printing
Powerful remote configuration and printer management
Large ribbon capacity
Easy-to-change supplies
Additional Asian font support to print characters optimized for different Asian regions
A quick change printer cloning cartridge
Asian language support on the operator panel
Monarch Printer Control Language II (MPCL-II) emulation
IER 520A and 520B emulation
Enhanced wireless security for 802.11g
Intelligent Mail barcode
Additional RFID tag support

Description

This printer offers:

Optional RFID for encoding and reading EPC global Class 1 Gen 2 tags
Print speeds up to 10 inches-per-second (ips)(1)
Snap-in interchangeable 203 dpi and 305 dpi printheads
On-demand single label and batch label printing
A print width of up to 4.1 inches
Powerful remote management software

Typical applications include:

Bar codes and RFID for shipping and distribution of a wide range of products
Shipping/receiving labels
Labeling for chemical and hazardous materials
Compliance labeling to meet industrial standards
Inventory control

The InfoPrint 6700 Model M40 is available with a nominal print width of four inches with print resolutions of 203 or 305 dpi. This printer offers a large ribbon capacity for continuous printing, and compatibility with label applications now running on the IBM 4400 and other InfoPrint 6700 Thermal Label Printers. Standard programming languages include native IGP, and emulations for Zebra, TEC, Sato, Intermec, and Datamax printers. Available attachments include the standard USB, serial and parallel ports, and optional wireless and LAN Ethernet.

Available software provides remote configuration and remote management capability.

Note:(1) Exact speed varies depending on document complexity, system configuration, software application, the printer driver, and the printer state.

The InfoPrint 6700 Model M40 is a compact, midrange thermal printer with a nominal print width of four inches. This model offers a print resolution of 203 or 305 dpi and maximum print speeds up to 10 ips.

The primary applications are for the production of RFID tags, bar codes, and graphics on labels and tags in an industrial environment.

Highlights of the InfoPrint 6700 Model M40 include:

Four-inch print width
Optional UHF RFID to read and encode EPC global Class 1 Gen 2 tags
Direct and thermal transfer printing
Primarily metal construction with some plastic features for light industrial applications
Snap-in, interchangeable 203 dpi and 305 dpi printheads
Print Speeds up to 10 ips (both 203 and 305 dpi)
On demand single label and batch label printing
Eight-inch roll diameter media capacity on three-inch core ( 265 mm diameter on 76.2 mm diameter core)
Fanfold media handling
Ribbon capacity 450 m on one-inch core
Easy-to-use LCD Operator Panel, approximately 3 x 1 3/4 in (7.6 x 4.4 cm)
RS-232 serial port
IEEE 1284 parallel port with ECP
USB 2.0 serial port
32-bit Power PC RISC microprocessor controller with 8 MB flash and 32 MB DRAM
PGL, ZGL, TGL, IGL, STGL, DGL co-resident printer languages (ASCII only)
Print Drivers for Windows XP, Windows 2000, and Windows 2003 Server
Printer Management Utility (PMU) for remote printer management
Setup Wizard software CD

Thermal printer technology

With excellent print quality, the InfoPrint 6700 printers use an inline thermal printhead that allows two modes of operation. These modes are:

Thermal transfer
During thermal transfer printing, the heated thermal printhead selectively heats elements in the printhead. When the heated elements contact a thermal ribbon, the heat reacts with the ribbon and bonds the image to the paper. This method is used for abrasive, long-storage applications, and IBM ribbons are available for this type of printing.
Direct thermal
During direct thermal printing, the thermal printhead also selectively heats printhead elements. When these elements contact the coated thermal paper, the dyes and developers in the coating react to the heat and develop an image. This mode of printing is generally used for short-term labeling applications.

RFID on the Model M40

The RFID feature of the InfoPrint 6700 Model M40 printer includes a reader, antenna and associated components to enable programming (encoding) and reading of RFID tags. RFID can be installed on the Model M40 in either the factory or in the field.

The following software emulations support the RFID capability:

IBM IGP
Zebra Graphics Language (ZGL)
Sato Graphics Language (STGL)

RFID Tag Support

The InfoPrint 6700 Model M40 supports EPC global Gen 2 tags only. Supported tags include:

Alien 9440 Squiggle
Alien 9460 Omni Squig
Avery 220 Runway
Generic EPC G2 Phil1
Generic EPC G2 Phil2
Generic EPC G2 Phil3
Generic EPC G2 Phil4
Impinj Banjo
Impinj Propeller
KSW Excalibar
KSW Templar
Omron Loop"
Omron Wave
Raflatec "432-like" Square
Raflatec 704 Short Dipole
Raflatec 790 Frog
FIDentics Flex Wing
Smbol Four T
Smbol Trident
TI Dallas

Class 1, Class 0, Class 0+ tags, Philips 1.19 tags, or other EPC global Gen 2 tags not listed above are not supported.

Print Speed

The print speed is adjustable in 1-ips increments (1 ips to 10 ips for both 203 dpi and 305 dpi). The default print speed is 4 ips. Print speeds are selectable via the control panel menu or via the host interface.

Print Intensity

Print intensity settings shall be selectable from either the printer's control panel menu or the host system.

Print Width and Media Width

The maximum print width is 104 mm (4.1 in) and the maximum media width is 130 mm (5.15 in).

Label Length

The minimum label length is 6 mm (0.25 in) and the maximum label length is 2.5 m (99 in).

Duty Cycle

As a medium duty industrial printer, the printer has a duty cycle of five thousand 4x 6 labels over a 12-hour day (1.5 hours of total print time).

Media Handling Modes

The printer operates in two basic modes: Batch and on demand.

Batch mode is used to print and collect labels for later use. On-demand is used in applications where labels will be used immediately after printing.

The printer supports the following Batch media handling modes.

Batch Continuous:
In this default media-handling mode, the printer:
- Unwinds the media from the media supply spindle or fanfold label stack.
- Prints the labels.
- Delivers the labels without aligning them for immediate removal. The last label is precisely positioned so that the next label to be printed is at top of form.
Batch Rewind:
In batch rewind mode, the printer:
- Unwinds the media from the media supply spindle or fanfold label stack.
- Prints the labels.
- Rewinds the printed media and its carrier web onto the optional rewind spindle.

The printer also supports the following on-demand media handling modes.

Tear-off:
The tear bar is a standard option. In tear-off mode the printer:
- Unwinds the media from the media supply spindle or fanfold label stack.
- Prints the label.
- Aligns the label perforation over the tear bar for removal by the operator.
Peel-off:
This mode requires installation of the Peel w/o Rewind feature (#5715, 5716), or the Peel with Rewind (#5717, 5718).
In peel-off mode, the printer:
- Unwinds the media from the media supply spindle or fanfold label stack.
- Prints the label, and automatically peels the label from the liner, leaving the peeled label at the mouth of the printer.
- The waste liner can then be rewound onto the optional rewind spindle, or directed to the floor if the rewind spindle is not present. The label present sensor detects when a label has been removed, and the printer retracts the media to top of form before printing the next label.
Cut:
This mode requires the cutter option and provides the capability to cut each label, or set of labels.

Standard Host Interfaces

The InfoPrint 6700 Model M40 includes the following host interfaces as standard.

Serial: RS232E with DB 9-pin serial connector for serial data rates of 1200, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k Baud
Parallel: IEEE 1284
Device USB: Universal Serial Bus 2.0 (full speed) with device connector located on the rear panel

Optional Host Interfaces

The InfoPrint 6700 Model M40 contains one slot to install one of the following host interface options. These options can be installed by an end-user.

Ethernet 10/100Base-T
Wireless Ethernet 802.11b/g

Operator Control Panel

The operator control panel consists of the following:

Easy-to-use LCD Operator Panel, approximately 3 x 1 3/4 in (7.6 x 4.4 cm). This backlighted LCD that will display up to four rows of 16 characters each or eight rows of 21 characters each.
Two primary control buttons (Online and Feed)
Seven secondary control buttons (Menu, Menu navigation, Enter, and Cancel)
Two status indicators (Online and Attention)

Printer Languages

The following printer languages are standard:

IGP
Sato Emulation (Sato)
Zebra Emulation (ZGL)
TEC Emulation (TEC)
Intermec Emulation (IGL)
Datamax Emulation (DGL)

Double Byte Character Set Features

The double-byte character set options are summarized in the following table.

 _________________________________________________________________
 | Language   |  Character Set |  Fonts                           |
 | ___________|________________|__________________________________|
 | ___________|________________|__________________________________|
 | Simplified |                |                                  |
 |  Chinese   |   GB18030      |  CITS Song Ti                    |
 | ___________|________________|________________________________  |
 |            |                |                                  |
 | Korean     |                |                                  |
 |  Hangul    |   UHC KSC      |  Monotype Imaging (Agfa Monotype)|
 |            |   5601-1987    |  HYSinMyeong Jo-Medium           |
 | ___________|________________|________________________________  |
 |            |                |                                  |
 | Japanese   |                |                                  |
 |  (Kanji)   |   Shift JIS    |  Monotype Imaging (Agfa Momotype)|
 |            |   with X-208   |  HGMinch0-Light                  |
 | ___________|________________|__________________________________|

Intelligent Mail barcode

The Intelligent Mail barcode is available with IGP (PGL) on the InfoPrint 6700 Model M40 (machine type 5403-M40).

The Intelligent Mail barcode (formally known as the 4-State Customer Barcode) is the next generation of USPS barcode technology used to sort and track letters and flats. Intelligent Mail barcode technology, among other things, combines the capabilities of the POSTNET barcode and the Planet Code barcode into one unique barcode.

Monarch Printer Language emulation (MGL)

This emulation is for the Monarch Printer Control Language II (MPCL-II), including 203 and 300 dpi support.

IER Printer Emulation (IEGL)

The emulation is for the IER 520A (203 dpi) and the IER 520B (300 dpi) printers only.

Enhanced Wireless 802.11g security

The wireless security has been enhanced with the addition of:

MS-CHAPv2: Second release of Microsoft's version of the Challenge-handshake authentication protocol
PEAP: Protected Extensible Authentication Protocol
LEAP: Lightweight Extensible Authentication Protocol

Asian language support on the InfoPrint 6700 Model M40 Operator Panel

Simplified Chinese, Traditional Chinese, and Korean languages are available for display on the operator panel

RFID Tags - Model M40

The InfoPrint 6700 Model M40 (5403-M40) supports GEN 2 tags only. Supported tags include:

Alien Technology
- Alien 9534 2x2
- Alien 9540 Squiggle
- Alien 9554 M-Tag
- Alien 9529 SQ
- Alien 9562 SH
Avery Dennison
- Avery AD222
- Avery AD224
- Avery AD430
- Avery AD812
- Avery AD820
KSW
- KSW Excalibur
- KSW Templar
Omron
- Omron Wave
- Omron Loop
Raflatac
- Raflatec 1282 Short Dipole
- Raflatec 1322 Satellite
- Raflatec 825 Dogbone
- Raflatec 843 Short Dipole
- Raflatec 791 Frog
- Raflatec 1210 Frog
RFIDentics
- RFIDentics Flex Wing
RSI
- RSI IN11 Thin Propeller
- RSI IN22 Jumping Jack
- RSI IN25 Paper Clip
- RSI IN43 Blade
- RSI IN45 Interval
- RSI IN46 Monster
- RSI IN47 Corkscrew
- RSI IN49 KAT2
Symbol
- Symbol Four T
- Symbol Trident
TI
- TI

The InfoPrint 6700 Model M40 supports additional Gen 2 tags through the Custom Tag Menu. Examples are:

EPC Gen2 96
Generic Phillips (yellow)
Generic Phillips (orange)
Generic Phillips (red)
Generic Phillips (blue)
Impinj Banjo
Raflatec 952 Belt

Chargeable features

Andale Japanese Font (#5815) - Initial

Andale Japanese Font (#5816) - MES

The Andale TrueType fonts are available as optional features on the InfoPrint 6700 Model M40.

This feature provides a cartridge that contains Andale TrueType fonts tailored for Japan. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5817, 5818, 5819, 5820, 5821, 5822), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5815
Field installation (MES): Yes, feature number 5816 (customer installable)
Cable order: None

Andale Korean Font (#5817) - Initial

Andale Korean Font (#5818) - MES

This feature provides a cartridge that contains Andale TrueType fonts tailored for Korea. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5819, 5820, 5821, 5822), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times with updated microcode installed after February 6, 2009.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5817
Field installation (MES): Yes, feature number 5818 (customer installable)
Cable order: None

Andale Simplified Chinese Font (#5819) - Initial

Andale Simplified Chinese Font (#5820) - MES

This feature provides a cartridge that contains Andale TrueType fonts tailored for Simplified Chinese. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5817, 5818, 5821, 5822), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5819
Field installation (MES): Yes, feature number 5820 (customer installable)
Cable order: None

Andale Traditional Chinese Font (#5821) - Initial

Andale Traditional Chinese Font (#5822) - MES

This feature provides a cartridge that contains Andale TrueType fonts tailored for Traditional Chinese. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5817, 5818, 5819, 5820), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5821
Field installation (MES): Yes, feature number 5822 (customer installable)
Cable order: None

Quick Change Memory Cartridge (#5607) - Initial

Quick Change Memory Cartridge (#5608) - MES

This feature provides a quick change memory cartridge (QCMC) that provides an easy way to copy a printer's firmware and configuration settings from one printer to another. A snapshot image of the source printer is stored onto the QCMC and a printer operator can easily copy that image to a target printer. The QCMC has its own resident network MAC address that will be used in place of the printer's LAN/WLAN MAC address when the cartridge is left installed in a printer. When the QCMC is removed, the printer will revert back to its internal LAN/WLAN MAC address.

The QCMC provides the ability to quickly duplicate an entire printer's firmware, saved configurations, and custom files through the printer's control panel with a user-friendly interface. No external host or files are needed to transfer this information to the QCMC. The saved snapshot image can be copied to any number of printers using the same QCMC so that the printers will be identically configured. Each printer, both the source and the target, must have the same hardware and options.

This allows a mission-critical printer to be exchanged quickly with a spare printer that will be identically configured, including the network MAC address.

The QCMC uses the same printer card slot as the optional memory cartridge and the font cartridges. This slot is standard on all InfoPrint 6700 Model M40 printers.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5817, 5818, 5819, 5820, 5821, 5822), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: Each printer, both the source and target, must have the same hardware and options.
Initial order: Yes, feature number 5607
Field installation (MES): Yes, feature number 5608 (customer installable)
Cable order: None

h5 style

Product number

                                               Initial   MES
                               Machine         Feature   Feature
Description                    number  Model   Number    Number


Andale Japanese font           5403    M40     5815      5816

Andale Korean font             5403    M40     5817      5818

Andale Simp Chinese font       5403    M40     5819      5820

Andale Trad Chinese font       5403    M40     5821      5822


Quick Change Cartridge         5403    M40     5607      5608

Model conversions: No model conversions are available.

Product charges

                                              Initial
                              Machine         Feature
Description                   number  Model   Number

Initial Order Feature:


Andale Japanese font           5403    M40     5815

Andale Korean font             5403    M40     5817

Andale Simp Chinese font       5403    M40     5819

Andale Trad Chinese font       5403    M40     5821


Quick Change Cartridge         5403    M40     5607


Field-Installable (MES) Features:


Andale Japanese font           5403    M40     5816

Andale Korean font             5403    M40     5818

Andale Simp Chinese font       5403    M40     5820

Andale Trad Chinese font       5403    M40     5822


Quick Change Cartridge         5403    M40     5608

ServiceElect Maintenance charges

For ServiceElect Maintenance Service charges, contact InfoPrint Solutions Company Global Services at 888-4343 (426-4343).

Trademarks

InfoPrint and Ricoh are registered trademarks of Ricoh Co., Ltd. in the United States, other countries, or both.

Ricoh is a registered trademark of Ricoh Co., Ltd. and its affiliated companies.

Wave, PartnerWorld and IBM are registered trademarks of IBM Corporation in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

InfoPrint Solutions Company LLC ("InfoPrint"] products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. InfoPrint Solutions Company LLC ("InfoPrint"] reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only

Printer Compatibility

The InfoPrint 6700 Model M40 is compatible with the IBM 6700 Model R40 in the following ways:

Accepts the same print files using any of the available print languages
Prints the same size image in the same location
Supports the same bar codes
Supports the same fonts
Supports the same character sets
Supports the same graphics files

Application Software

Windows Drivers to support Microsoft Windows XP, Windows 2000, and Windows 2003 Server operating systems are provided with the printer.

The InfoPrint 6700 Model M40 is supported by the Printer Management Utility (PMU) remote management software with the Ethernet 10/100 BaseT

Supplies

Ribbons
Printheads: The printhead must be replaced periodically, and new printheads are obtained as a supply item. The 305 dpi printhead may be ordered to upgrade a 203 dpi machine to 305 dpi.

The above items are considered supplies and, as such, are not available from IBM service or included in the warranty and maintenance service agreement.

Media Handling Options

The following media handling options are available. These options cannot be installed with the RFID option.

Media Cutter (#7350, 7351)
The media cutter is an industrial grade, long life device, capable of cutting a variety of pressure sensitive paper, tag, and synthetic label stock.
Peel w/out Liner Rewind (#5715, 5716)
The value peel option provides the ability to peel labels while discarding the dispensed liner in front of the printer.
Media Rewinder (#5717, 5718)
The optional rewind spindle is capable of rewinding a full 8.0-inch roll of labels on a 3-inch media core.
Peel with Liner Rewinder (#5719, 5720)
The peel and liner rewind feature provides the capability to peel labels and rewind a full 8.0-inch roll of the dispensed liner in peel-off mode.

Memory Cartridge (#5605, 5606)

This feature providesa 32 MB memory cartridge. It can be installed by the end-user and increases the flash memory capacity to store items such as fonts (including optional DBCS), custom forms, logos, and bitmaps. Only one cartridge may be installed in the printer at a time.

The standard printer has 8 MB flash memory. Installing this optional flash memory increases the total flash memory to 40 MB.

Windows Drivers

Customized Windows XP, Windows 2000, and Windows 2003 Server drivers are provided with te InfoPrint 6700 Model M40 printer.

Printer Management Software

The InfoPrint 6700 Model M40 printer supports the IBM 6400/6500/4400/6700 Printer Manager Utility.

Operator Panel translations

The Operator Panel language is customer selectable. The choice of languages are English, French, Italian, German, and Spanish.

TEC Emulation

The TEC Emulation provides support for emulation of TEC printers. This interpreter is compatible with the following TEC printers: Tec B372, B472, B482, B572, B672, B682, B872, and B882.

Accessibility by people with disabilities

The following features support use by people with disabilities:

Controls and latches are operable with one hand and minimal dexterity.
Keys are discernible by touch without activating them.
The display, controls, latches, and levers are accessible to someone in a wheel chair.
Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.

New feature availability:

The non-chargeable function described can be added to installed printers by upgrading to the latest level of microcode after February 6, 2009.

Intelligent Mail barcode

The Intelligent Mail barcode is available with IGP (PGL) on the InfoPrint 6700 Model M40 (machine type 5403-M40).

Monarch Printer Language emulation (MGL)

This emulation is for the Monarch(RTM) Printer Control Language II (MPCL-II), including 203 and 300 dpi support.

IER Printer Emulation (IEGL)

The emulation is for the IER 520A (203 dpi) and the IER 520B (300 dpi) printers only.

Enhanced Wireless 802.11g security The wireless security has been enhanced with the addition of:

MS-CHAPv2: Second release of Microsoft's version of the Challenge-handshake authentication protocol
PEAP: Protected Extensible Authentication Protocol
LEAP: Lightweight Extensible Authentication Protocol

Asian language support on the InfoPrint 6700 Model M40 Operator Panel

Simplified Chinese, Traditional Chinese, and Korean languages are available for display on the operator panel

RFID Tags - Model M40

The InfoPrint 6700 Model M40 (5403-M40) supports GEN 2 tags only. Supported tags include:

Alien Technology:
- Alien 9534 2x2
- Alien 9540 Squiggle
- Alien 9554 M-Tag
- Alien 9529 SQ
- Alien 9562 SH
Avery Dennison:
- Avery AD222
- Avery AD224
- Avery AD430
- Avery AD812
- Avery AD820
KSW:
- KSW Excalibur
- KSW Templar
Omron:
- Omron Wave
- Omron Loop
Raflatac:
- Raflatec 1282 Short Dipole
- Raflatec 1322 Satellite
- Raflatec 825 Dogbone
- Raflatec 843 Short Dipole
- Raflatec 791 Frog
- Raflatec 1210 Frog
RFIDentics:
- RFIDentics Flex Wing
RSI:
- RSI IN11 Thin Propeller
- RSI IN22 Jumping Jack
- RSI IN25 Paper Clip
- RSI IN43 Blade
- RSI IN45 Interval
- RSI IN46 Monster
- RSI IN47 Corkscrew
- RSI IN49 KAT2
Symbol:
- Symbol Four T
- Symbol Trident
TI:
- TI Dallas

The InfoPrint 6700 Model M40 supports additional Gen 2 tags through the Custom Tag Menu. Examples are:

EPC Gen2 96
Generic Phillips (yellow)
Generic Phillips (orange)
Generic Phillips (red)
Generic Phillips (blue)
Impinj Banjo
Raflatec 952 Belt

Section 508 of the U.S. Rehabilitation Act

Yes.

Model Summary Matrix

Model	Nominal Print Width (inches)
M40	4

Customer Setup (CSU)

The InfoPrint 6700 Model M40 is designated a Customer Setup (CSU) machine. The Quick Setup Guide contains the necessary instructions to enable the customer to set up and configure the printer.

Should the customer be interested in having IBM Service install and configure the InfoPrint 6700 or its features, see theInstallability section for information on the optional CE Installation contract.

Physical Specifications

The dimensions of the InfoPrint 6700 Model M40 are less than the following:

Width: 280 mm (11.0 inches)
Depth: 458 mm (18.0 inches)
Height: 318 mm (12.5 inches)

The weight of the unpacked printer is approximately 35 lbs. (16 KG) excluding options.

Operating Environment

InfoPrint 6700 Model M40 Power Consumption

+-------------+---------------
|Operating    | Watts        |
|Mode         |              |
|-------------+---------+----|
|-------------+---------+----|
| Power       | less than    |
| Saver       | 20           |
|             |              |
+-------------+---------+----|
|             |less than     |
| Idle        |  Watts       |
|             | 40 Watts     |
+-------------+---------+-----
| Maximum     |  150         |
|             |  Watts       |
|             |(at 30%       |
|             |Print Density |
+-------------+---------+-----

InfoPrint 6700 Model M40 Voltage

115 to 230 V ac 50/60 Hz

InfoPrint 6700 Model M40 Temperature

Operating 5 to 40 degrees C ( 40 to 104 degrees F)
Storage -5 to 60 degrees C ( -23 to 140 degrees F)(1)

InfoPrint 6700 Model M40 Relative humidity

Operating 10 to 90 (percent) non-condensing
Storage 5 to 90 (percent) non-condensing(1)

Note:(1) These conditions do not apply to storage of media and ribbons.

InfoPrint 6700 Model M40 Acoustics

Under typical operating conditions the noise level generated is less than 66 dBa.

Limitations

Not applicable.

Hardware Requirements

The InfoPrint 6700 Thermal Label Printers attach to systems, controllers, and processors through the following adapters:

Ethernet 10/100 BaseT LAN
Wireless Ethernet 802.11b/g using Symbol LA-5127 compact flash radio
Device USB: Universal Serial Bus 2.0 (Full Speed)
Parallel: IEEE 1284 36-pin standard parallel connector
Serial: RS232E with DB 9-pin serial connector

Software Requirements

When the Ethernet 10/100 BaseT Network Interface Card is installed, the following Network Operating Systems and protocols are supported:

 Operating System              Protocol
 ------------------            --------
 i-series V5R3                  TCP/IP

 Windows 2000                   TCP/IP
 Windows 2003 Server            TCP/IP
 Windows XP                     TCP/IP

 UNIX                           TCP/IP

The Ethernet Interface supports network printing under various TCP/IP environments including most variations of UNIX.

Refer to theInfoPrint 6700 Ethernet Interface User's Manual for details and limitations concerning the Ethernet NIC Network Support.

Publications

The following publications can be printed from the CD that is shipped with the printer. All publications are English unless noted otherwise:

           Title                                        Order Number
------------------------------------------------------  ------------
 InfoPrint 6700-M40  Quick Setup Guide (English)        G550-0731
 InfoPrint 6700-M40  Quick Setup Guide
   (English, French, German, Italian, Portuguese,
    and Spanish in one document)                        G550-0744
 InfoPrint 6700-M40  Quick Setup Guide (Hungarian)      GA22-5730
 InfoPrint 6700-M40  Quick Setup Guide (Korean)         GA30-3462
 InfoPrint 6700-M40  Quick Setup Guide (Polish)         GA85-0169
 InfoPrint 6700-M40  Quick Setup Guide (Russian)        G571-0077
 InfoPrint 6700-M40  Quick Setup Guide (Simp Chinese)   G151-0656
 InfoPrint 6700-M40  Quick Setup Guide (Trad Chinese)   G550-0142

 InfoPrint 6700-M40  Quick Setup Guide (Spanish)        G510-3169
 InfoPrint 6700-M40  Quick Setup Guide (German)         GA12-5106
 InfoPrint 6700-M40  Quick Setup Guide (French)         GF11-0989
 InfoPrint 6700-M40  Quick Setup Guide (Dutch)          GA30-3462
 InfoPrint 6700-M40  Quick Setup Guide (Czech)          G550-1376

 InfoPrint 6700-M40  User's Guide                       G550-0741

 InfoPrint 6700 IGP  Programmer's Reference             G550-0453

 InfoPrint 6700-M40 Ethernet Interface User's Manual    G550-0743

 InfoPrint 6700 Safety Manual                           G550-0460

 InfoPrint 6700 Printer Management Utility              G550-0455

 InfoPrint 6700 RFID Labeling Reference  (English)      G550-0459
 InfoPrint 6700 RFID Labeling Reference (Dutch)         GA14-6023
 InfoPrint 6700 RFID Labeling Reference (French)        GF11-0965
 InfoPrint 6700 RFID Labeling Reference (German)        GA12-5057
 InfoPrint 6700 RFID Labeling Reference (Korean)        GA30-3187
 InfoPrint 6700 RFID Labeling Reference (Simp Chinese)  G151-0243
 InfoPrint 6700 RFID Labeling Reference (Spanish)       G510-3157

 InfoPrint 6700 ZGL Reference Manual                    G550-0425
 InfoPrint 6700 TGL Reference Manual                    G550-0462
 InfoPrint 6700 IGL Reference Manual                    G550-0463
 InfoPrint 6700 STGL Reference Manual                   G550-0464
 InfoPrint 6700 DGL Reference Manual                    G550-0508

Features -- Specify/Special/Exchange

No Charge Specify Codes

Power Cords:
------------
  Power Cord - United States                  9951       6951
  Power Cord - Chicago 6 foot                 9986       6986

  Power Cord - Europe                         9970       6970
  Power Cord - United Kingdom                 9971       6971
  Power Cord - South Africa                   9972       6972
  Power Cord - Italy                          9973       6973

  Power Cord - Switzerland                    9974       6974
  Power Cord - Denmark                        9975       6975
  Power Cord - Israel                         9976       6976
  Power Cord - Argentina                      9977       6977

  Power Cord - S America                      9978       6978
  Power Cord - Australia                      9979       6979
  Power Cord - Saudi Arabia                   9980       6980
  Power Cord - Japan                          9981       6981
  Power Cord - China                          9982       6982
  Power Cord - India                          9983       6983
  Power Cord - Chile                          9984       6984
  Power Cord - Korea                          9985       6985
  Power Cord - Taiwan                         9950       6950

Language Groups:
----------------
  English                                     2924       6824
  French                                      2928       6828
  German                                      2929       6829
  Spanish                                     2931       6831
  Italian                                     2932       6832
  Korean                                      2933       6833
  Simplified Chinese                          2934       6834
  Taiwan                                      2937       6837
  Polish                                      2936       6836
  Dutch                                       2988       6888
  Russian                                     2938       6838
  Czech                                       2939       6839
  Hungarian                                   2940       6840

Power Cords

The standard power cord is 6 ft (1.8m). The standard plug on all power cords is non-locking.

The following are No-Charge codes for the power cord, and language groups.

One Power Cord specify code must be on each initial order. There are no defaults.

One Language Group specify code must be present on each initial order.

For the convenience of Business Partners, up to two language groups may be specified.

 Language Groups:
 ----------------
  English                                     2924
  French                                      2928
  German                                      2929
  Spanish                                     2931
  Italian                                     2932
  Korean                                      2933
  Simplified Chinese                          2934
  Taiwan                                      2937
  Polish                                      2936
  Dutch                                       2988
  Russian                                     2938
  Czech                                       2939
  Hungarian                                   2940

Cables

Data cables are supplied by the customer.

Special Feature Codes -- Chargeable

                                        Machine
Description                             Type          Model
------------------------------------    -------       -----
InfoPrint 6700 Thermal Label Printer    5403          M40


                                               Feature Codes
                                              ---------------
 E'net 10/100BaseT                            4177       5180
 Wireless E'net w/radio                       4543       4279
 RFID (US)                                    4900       4901
 Memory Cartridge                             5605       5606

 305 dpi Printhead (Init)                     3500       None

 Peel w/o Rewind                              5715       5716
 Full Media Rewind                            5717       5718
 Peel w/liner rewind                          5719       5720

 Media Cutter                                 7350       7351

 Ribbons - TTW Qty 12                         6004        None

                                              Initial   MES
                              Machine         Feature   Feature
Description                   number  Model   Number    Number
-------------------------     ------- -----   -------   --------
Andale Japanese font           5403    M40     5815      5816
Andale Korean font             5403    M40     5817      5818
Andale Simp Chinese font       5403    M40     5819      5820
Andale Trad Chinese font       5403    M40     5821      5822


Quick Change Cartridge         5403    M40     5607      5608

Servicepac Maintenance Options for the InfoPrint 6700 Model M40

Machine
Type/                                  Part
Model       Description                Number
--------    -------------------        -------
5403-M40    1 Year Depot Repair        44T5779
5403-M40    2 Year Depot Repair        44T5780
5403-M40    3 Year Depot Repair        44T5781
5403-M40    4 Year Depot Repair        44T5782
5403-M40    5 Year Depot Repair        44T5783

5403-M40    1 Year 9x5 NBD             44T5784
5403-M40    2 Year 9x5 NBD             44T5785
5403-M40    3 Year 9x5 NBD             44T5786
5403-M40    4 Year 9x5 NBD             44T5787
5403-M40    5 Year 9x5 NBD             44T5788

5403-M40    1 Year 24x7 SD             44T5789
5403-M40    2 Year 24x7 SD             44T5790
5403-M40    3 Year 24x7 SD             44T5791
5403-M40    4 Year 24x7 SD             44T5792
5403-M40    5 Year 24x7 SD             44T5793

5403-M40    1 Year Depot Repair (PW)   44T5794
5403-M40    2 Year Depot Repair (PW)   44T5795

5403-M40    1 Year 9x5 NBD (PW)        44T5796
5403-M40    2 Year 9x5 NBD (PW)        44T5797

5403-M40    1 Year 24x7 SD (PW)        44T5798
5403-M40    2 Year 24x7 SD (PW)        44T5799
5403-M40

Note:(PW): Post-Warranty Servicepac

Feature Descriptions

(#4177) Ethernet 10/100 BaseT Ethernet Adapter (Initial order)

(#5180) Ethernet 10/100 BaseT NIC Adapter (MES)

The Ethernet 10/100 BaseT NIC Adapter is an internal adapter that connects the printer to an Ethernet network using TCP/IP, and NetBIOS TCP/IP.

The adapter provides the capability to provide printer status information via a Web page when the printer's IP address is supplied to a standard Web browser. This is in addition to the function provided by the InfoPrint 6700 Printer Management Utility.

Maximum Number of Features: One of either #4177 or #5180

Prerequisites: InfoPrint 6700 Model M40

Corequisites: None.

Compatibility Conflicts: None.

Customer Setup:

Yes, for both initial order and Mes (#4177 and 5180). Feature number 5180 field installation is performed by IBM Field Engineering.

(#4543) Wireless Ethernet w/Radio (Initial order)

(#4279) Wireless Ethernet w/Radio (MES)

This feature provides an adapter card that is integrated into the printer. This adapter provides a 10/100 BaseT LAN interface, as well as the wireless Ethernet 802.11b/g compatible interface. The appropriate wireless radio is included with this feature. It is not necessary for the customer to obtain a radio or antenna.

Prerequisites

None.

Corequisites

None.

Compatibility Conflicts:

This feature uses the only PCI adapter slot.

Cannot be installed with:

Ethernet 10/100 BaseT (#4177, 5180)

Customer Setup

Yes, for both initial order (#4543) and MES (#4279).

Limitations

None.

Maximum Allowed

One.

Minimum Required

None.

Field Installation

Yes, feature number 4279 is field installable.

(#3500) 305 DPI Printhead (4-in for Model M40) (Initial Order)

This feature provides a 305 dpi printhead. A 203 dpi printhead is provided on initial orders if feature number 3500 is not ordered.

Prerequisites:
- InfoPrint 6700 Model M40
Corequisites: None.
Limitations: Notice that this feature is not available for field installation as an MES; Since the 305 dpi printhead is a supply item, a 305 dpi printhead must be ordered as a supply item for field installation. Th/pis is true regardless of whether a 203 dpi or 305 dpi printhead is presently installed. The part number for ordering the 305 dpi printhead as a supply item is:
- Model M40 305 dpi 4-inch printhead: PN 44D7571

(#5605) Memory Cartridge (Initial order)

(#5606) Memory Cartridge (MES)

This feature provides a total of 32 MB Flash memory to support functions such as storing fonts, customer forms, or logos and printing label up to a maximum of 99 inches in length.

Prerequisites:InfoPrint 6700 Model M40

Corequisites: None.

Compatibility Conflicts: None.

Customer Setup: Yes

(#5715) Peel w/o Rewind (Initial order)

(#5716) Peel w/o Rewind (MES)

This feature provides the capability to peel the label from the backing.

Peel-Off Mode
In Peel-Off Mode the printer unwinds the media from the supply spindle, prints the label, automatically peels the label from the media carrier web, and leaves the peeled label at the mouth of the printer. The label presentation sensor detects when the label has been removed, and the printer then retracts the media before printing the next label.

Maximum Allowed: One

Minimum: None

Limitations:

This feature cannot be installed with any of the following:

Peel w/liner Rewind (#5719, 5720), or Media Cutter (#7350, 7351), or Full Media Rewind (#5717, 5718)
Any US RFID feature (#4900, 4901)
Any Asia Pacific RFID feature (#4920, 4921, 4922, 4923, 4924, 4930, 4931, 4932, 4933, or 4934)

Prerequisites: InfoPrint 6700 Model M40

Plant Installation: Yes, feature number 5715

Field (MES) Installation: Yes, feature number 5716

Corequisites: None

Customer Setup: Yes, for both initial order and MES.

(#5719) Peel w/Liner Rewind (Initial order)

(#5720) Peel w/Liner Rewind (MES)

This feature provides the capability to peel the label from the backing and rewind a full 8.0-inch roll of the dispensed liner. This operates in Peel-Off Mode.

In Peel-Off Mode the printer unwinds the media from the supply spindle, prints the label, automatically peels the label from the media carrier web, and rewinds the dispensed liner onto an 8-inch roll (with feature number 5719 or 5720). A sensor detects when the label has been removed, and the printer then retracts the media before printing the next label.

Maximum Allowed: One

Minimum: None

Limitations:

Peel w/o rewind (#5715, 5716) or Media Cutter (#7350, 7351), or Full Media Rewind (#5717, 5718)
Any US RFID feature (#4900, 4901)
Any Asia Pacific RFID feature (#4920, 4921, 4922, 4923, 4924, 4930, 4931, 4932, 4933, or 4934)

Prerequisites: InfoPrint 6700 Model M40

Plant Installation: Yes, feature number 5719

Field (MES) Installation: Yes, feature number 5720

Corequisites: None.

Customer Setup: Yes, for feature number 5719. An IBM Field Engineer must install feature number 5720.

(#5717) Full Media Rewind (Initial order)

(#5718) Full Media Rewind (MES)

This feature provide an optional rewind spindle that is capable of rewinding a full 8.0 inch roll of labels on a 3-inch media core.

In batch mode, the labels are wound to a spool after they are printed. The spooled labels can then be used at a later time and place.

Maximum Allowed: One

Minimum: None

Limitations:

This feature cannot be installed with any of the following:

Peel w/o rewind (#5715, 5716) or Peel w/liner Rewind (#5719, 5720), or Media Cutter (#7350, 7351)
Any US RFID feature (#4900, 4901)
Any Asia Pacific RFID feature (#4920, 4921, 4922, 4923, 4924, 4930, 4931, 4932, 4933, or 4934)

Prerequisites: InfoPrint 6700 Model M40

Plant Installation: Yes, feature number 5719

Field (MES) Installation: Yes, feature number 5720

Co-Requisites: None

Customer Setup: Yes, for feature number 5717. An IBM Field Engineer must install feature number 5718.

(#7350) Media Cutter (Initial order)

(#7351) Media Cutter (MES)

The media cutter is an industrial grade, long life device capable of cutting a variety of pressure sensitive paper, tag, and synthetic label stock.

Prerequisites:

InfoPrint 6700 Model M40

Corequisites: None.

Compatibility Conflicts:

This feature cannot be installed with any of the following:

Peel w/o rewind (#5715, 5716) or Peel w/liner Rewind (#5719, 5720), or Full Media Rewind (#5717, 5718)
Any US RFID feature (#4900, 4901)
Any Asia Pacific RFID feature (#4920, 4921, 4922, 4923, 4924, 4930, 4931, 4932, 4933, or 4934)

Customer Setup: Yes, for both initial order and MES.

Prerequisites: An InfoPrint 6700 Model M40

Corequisites: None.

(#4900) RFID (Initial order)

(#4901) RFID (MES)

This feature provides the RFID capability for an InfoPrint 6700 Model M40

Maximum Allowed: One
Minimum: None
Limitations:
This feature cannot be installed with any of the following:
- Peel w/o rewind (#5715, 5716) or Peel w/liner Rewind (#5719, 5720), or Media Cutter (#7350, 7351), or Full Media Rewind (#5717, 5718)
- Any Asia Pacific RFID feature (#4920, 4921, 4922, 4923, 4924, 4930, 4931, 4932, 4933, or 4934)
This feature is limited to the following geographical areas:
- United States
- Canada
Prerequisites: InfoPrint 6700 Model M40 (5403-M40)
Plant Installation: Yes, feature number 4900
Field Installation: Yes, feature number 4901
Customer Setup: Yes, for feature number 4900; no for feature number 4901.
Corequisites: None

(#6004) TTW 4-inch Wax Ribbons

This feature provides a start-up supply of twelve 4-inch wax TTW ribbons for the InfoPrint 6700 Model M40. These ribbons are Part Number 44D7578, 110 mm x 450 meters.

This is approximately a three-month supply with normal usage. This feature is initial order only and can only be ordered with a quantity of one.

Maximum Allowed: One
Minimum: None
Limitations: Model M40 only
Plant Installation: Yes
Field Installation: No
Customer Setup: Yes
Corequisites: None

All of the following chargeable features require that installed printers contain microcode installed with the February 6, 2009 microcode release or later.

(#5815) Andale Japanese Font - Initial

(#5816) Andale Japanese Font - MES

The Andale TrueType(Registered TM) fonts are available as optional features on the InfoPrint 6700 Model M40.

This feature provides a cartridge that contains Andale TrueType fonts tailored for Japan. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5817, 5818, 5819, 5820, 5821, 5822), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5815
Field installation (MES): Yes, feature number 5816 (customer installable)
Cable order: None

(#5817) Andale Korean Font - Initial

(#5818) Andale Korean Font - MES

This feature provides a cartridge that contains Andale TrueType fonts tailored for Korea. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5819, 5820, 5821, 5822), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times updated by microcode installed after February 6, 2009.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5817
Field installation (MES): Yes, feature number 5818 (customer installable)
Cable order: None

(#5819) Andale Simplified Chinese Font - Initial

(#5820) Andale Simplified Chinese Font - MES

This feature provides a cartridge that contains Andale TrueType fonts tailored for Simplified Chinese. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5817, 5818, 5821, 5822), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5819
Field installation (MES): Yes, feature number 5820 (customer installable)
Cable order: None

(#5821) Andale Traditional Chinese Font - Initial

(#5822) Andale Traditional Chinese Font - MES

This feature provides a cartridge that contains Andale TrueType fonts tailored for Traditional Chinese. This font is available through IGP (PGL) or ZGL commands.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5817, 5818, 5819, 5820), QCMC (#5607, 5608), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: None
Initial order: Yes, feature number 5821
Field installation (MES): Yes, feature number 5822 (customer installable)
Cable order: None

(#5607) Quick Change Memory Cartridge - Initial

(#5608) Quick Change Memory Cartridge - MES

This allows a mission-critical printer to be exchanged quickly with a spare printer that will be identically configured, including the network MAC address.

The QCMC uses the same printer card slot as the optional memory cartridge and the font cartridges. This slot is standard on all InfoPrint 6700 Model M40 printers.

Minimum number of features: 0
Maximum number of features: 1
Prerequisites: InfoPrint 6700 Model M40 (machine type 5403 Model M40) with updated microcode installed after February 6, 2009.
Corequisites: None
Compatibility conflicts: Cannot use other font cartridges (#5610, 5611, 5612, 5613, 5614, or 5615, 5815, 5816, 5817, 5818, 5819, 5820, 5821, 5822), or memory cartridges (#5605, 5606) at the same time since all of these features use the same slot. However, all of these features can be ordered for the same machine since they can be easily changed by an operator, and used at different times.
Customer setup: Yes
Limitations: Each printer, both the source and target, must have the same hardware and options.
Initial order: Yes, feature number 5607
Field installation (MES): Yes, feature number 5608 (customer installable)
Cable order: None

Supplies

IBM Thermal Ribbons are available and recommended for the InfoPrint 6700 Thermal Printer.

Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

Windows is a trademark of Microsoft Corporation.

UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
? IBM Corporation 2009.

Argecy offers a new standard in refurbished printers and office electronics.

IBM Infoprint 6700-M Thermal Label Printer Family

Chargeable features

Andale Japanese Font (#5815) - Initial

Andale Japanese Font (#5816) - MES

Andale Korean Font (#5817) - Initial

Andale Korean Font (#5818) - MES

Andale Simplified Chinese Font (#5819) - Initial

Andale Simplified Chinese Font (#5820) - MES

Andale Traditional Chinese Font (#5821) - Initial

Andale Traditional Chinese Font (#5822) - MES

Quick Change Memory Cartridge (#5607) - Initial

Quick Change Memory Cartridge (#5608) - MES

Product charges

Trademarks

Terms of use

Model Summary Matrix

Customer Setup (CSU)

Physical Specifications

Operating Environment

Limitations

Hardware Requirements

Software Requirements

No Charge Specify Codes

Power Cords

Cables

Special Feature Codes -- Chargeable

Feature Descriptions

(#4177) Ethernet 10/100 BaseT Ethernet Adapter (Initial order)

(#5180) Ethernet 10/100 BaseT NIC Adapter (MES)

(#4543) Wireless Ethernet w/Radio (Initial order)

(#4279) Wireless Ethernet w/Radio (MES)

(#3500) 305 DPI Printhead (4-in for Model M40) (Initial Order)

(#5605) Memory Cartridge (Initial order)

(#5606) Memory Cartridge (MES)

(#5715) Peel w/o Rewind (Initial order)

(#5716) Peel w/o Rewind (MES)

(#5719) Peel w/Liner Rewind (Initial order)

(#5720) Peel w/Liner Rewind (MES)

(#5717) Full Media Rewind (Initial order)

(#5718) Full Media Rewind (MES)

(#7350) Media Cutter (Initial order)

(#7351) Media Cutter (MES)

(#4900) RFID (Initial order)

(#4901) RFID (MES)

(#6004) TTW 4-inch Wax Ribbons

(#5815) Andale Japanese Font - Initial

(#5816) Andale Japanese Font - MES

(#5817) Andale Korean Font - Initial

(#5818) Andale Korean Font - MES

(#5819) Andale Simplified Chinese Font - Initial

(#5820) Andale Simplified Chinese Font - MES

(#5821) Andale Traditional Chinese Font - Initial

(#5822) Andale Traditional Chinese Font - MES

(#5607) Quick Change Memory Cartridge - Initial

(#5608) Quick Change Memory Cartridge - MES

Trademarks