IBM Infoprint 1832 MICR
 | Parts | |
IBM 4551-MN1 InfoPrint MICR 1832MN Printer with Network New 4551-MN1 39V4034 (New) Retired, no longer available: Contact for alternatives | ||
This monochrome laser printer offers faster printing of up to 45 pages per minute (ppm)(1) on letter media and up to 43 ppm(1) on A4 media.
| Speed (pgs / minute) | 45 ppm |
| Time to First Page | 7.5 seconds |
| Duty Cycle (pgs / month) | 200,000 |
| Monthly Page Volume | 3,000-20,000 |
| Numeric Key Pad | Yes |
| Paper Capacity (sheets) - - Standard (in/out) - - Max. (in/out) | 650/350 4,300/2,750 |
| Paper Sources - - Standard (in/out) - - Max. (in/out) | 2/1 7/3 |
| Duplex Printing | Optional |
| DRAM (Std / Max) | 128MB/640MB (DLE base models support 32MB of user-addressable Flash memory) |
| User Addressable Flash DLE Based Printers Only | 32 MB |
| Processor Speed | 500 MHz |
| Standard Connectivity | USB / 10/100M Ethernet |
| Optional Connectivity | 802.11b/g/n, Gigabit, Parallel, Serial |
| Standard Dimensions (W x D x H, in inches) | 13.7 x 16.7 x 19.4 |
| Weight (in lbs) | 40.6 |
| Ship with MICR Cartridge Yield | 8k |
| Aftermarket Cartridge Yield | 8k, 15k |
| Secure Fonts | E13B MICR Font CMC7 MICR Font MicroPoint Font Secure Numeric Font ICR Numeric Font |
| Quality Assurance & Security Features | Eco-Mode Energy Setting Audit Trail Reporting Auto Jam Recovery Disable Password Protection MICR Toner Detection Datastream Decryption DES & AES Tray Locking & Print Protection Toner Low Warnings MICR MFP Protection |
 75P6997 Staple refill sets 5,000 x 3 | |
39V3590 Maintenance Kit (LV: 110V) Contents: Fuser, Trasnfer roll, Charge roll, 6 Pick rolls 300,000 | |
| 39V3598 Pick Roll (2) 300,000 | |
| 39V3599 Charge Roll 300,000 | |
| 39V3602 Fuser with Detach Fingers (LV: 110V) 150,000 | 39V3602 Fuser with Detach Fingers (LV: 110V) New 39V3602 150K Page Yield, Advanced Exchange (New) $332.00 |
| 39V3604 Transfer Roll 300,000 | |
 39V2953 250-Sheet Drawer | |
 39V2954 550-Sheet Drawer | |
| 39V2955 250-Sheet Tray | |
| 39V2956 550-Sheet Tray | |
 39V2957 2,000-Sheet | |
 39V2959 200-Sheet Universally Adj Drawer | |
| 39V2960 200-Sheet Universally Adj Tray | |
 39V2961 400-Sheet Universally Adj Drawer | |
| 39V2962 400-Sheet Universally Adj Tray | |
 39V2965 Envelope Feeder | |
 39V3533 StapleSmart Finisher | |
 39V3534 Output Expander | |
 39V3535 5-Bin Mailbox | |
 39V3536 High Capacity Output | |
 39V2693 IPDS & SCS/Tne | |
39V3463 Decryption Card | |
39V3464 Bar Code Card | |
39V3360 128 MB Memory | |
39V3415 256 MB Memory | |
39V3416 512 MB Memory | |
39V3593 256 MB Flash Memory | |
 39V3420 80 GB Hard Disk | |
 39V3608 Ethernet 1000BaseTX | |
 39V1524 Ethernet 10/100BaseTX (1 USB port) | |
| 39V1525 Ethernet 1000BaseTX (4 USB ports) | |
 75P6854 802.11g Wireless to USB | |
 39V3623 802.11b/g/n Wireless Print Server | |
 39V3423 Parallel 1284-B Interface | |
 39V3424 RS-232C Serial Interface Card | |
 75P7029 10 ft. Parallel Cable | |
 75P7030 2-meter USB Cable | |
 39V3615 5 in. Spacer | |
 39V3588 Caster Base | |
39V3618 Korean Font Card | |
39V3619 Simplified Chinese Font Card | |
39V3620 Traditional Chinese Font Card | |
39V3621 Japanese Font Card |
| Abstract |
The 4551 from InfoPrint Solutions Company, a Ricoh-IBM joint venture, is the InfoPrint 1832 printer. This printer is the replacement for the InfoPrint 1532.
Model Abstract 4551-N01
The 4551 InfoPrint 1832 printer Model N01 has 128 MB standard memory, 640 MB maximum memory, USB port, a 500 MHz processor, optional duplex, and 10/100BaseTX Ethernet.
Model Abstract 4551-DN1
The 4551 InfoPrint 1832 printer Model DN1 has 128 MB standard memory, 640 MB maximum memory, USB port, a 500 MHz processor, standard duplex, and 10/100BaseTX Ethernet.
| Highlights |
This monochrome laser printer offers faster printing of up to 45 pages per minute (ppm)(1) on letter media and up to 43 ppm(1) on A4 media. Other benefits of the InfoPrint 1832 include:
- Faster processor than previous product
- Smaller size and weight than previous product
- Quiet mode reduces acoustics
- Larger capacity toner cartridges than previous product
- Hardware, software, and firmware improvements for better print quality and smoother images, including automatic darkness adjustment and a new gear train resulting in a more uniform print
- Tilt operator panel for easier viewing
Note: (1) Exact print speeds vary depending on document complexity, system configuration, software applications, driver, and printer status.
| Description |
InfoPrint 1832 is the replacement for the InfoPrint 1532 workgroup printer. This monochrome laser printer offers faster printing of up to 45 ppm(1) on letter size media and up to 43 ppm(1) on A4 size media. The time to first print is as fast as 7.5 seconds. The printer come in the following models:
Standard Maximum Standard
Model memory memory USB Processor Duplex 10/100BaseTX
----- -------- ------- -------- --------- ------- ------------
n01 128 MB 640 MB Standard 500 MHz Optional Yes
dn1 128 MB 640 MB Standard 500 MHz Standard Yes
All models include one 250-sheet drawer and a 100-sheet multipurpose feeder (MPF) for a total input capacity of 350 sheets standard. Up to four optional input drawers are supported for a maximum input capacity of 4,000 sheets. Standard output capacity is 350 sheets with a maximum output capacity of 2,750 sheets.
Memory
All models have one slot for additional SDRAM memory. Memory options for the printer include 128 MB, 256 MB, or 512 MB memory DIMMs. All models have one slot the optional 256 MB flash memory card and one slot for an optional hard disk.
Network connections
All models include internal Ethernet 10/100BaseTX as standard.
The internal wireless feature allows the printer to be connected directly to a wireless LAN. This supports the IEEE 802.11b, 802.11g, and 802.11n draft 2.0 standards. Draft 2.0 refers to the version of the not-yet-ratified IEEE 802.11n standard.
Usage rates
The maximum monthly usage for the InfoPrint 1832 is 200,000 impressions. InfoPrint Solutions Company does not recommend printing to the monthly maximum on a consistent basis.
Print quality
The print resolutions supported by the printer are:
- 1200 x 1200 dpi
- 2400 Image Quality
- 1200 Image Quality
- 600 x 600 dpi
The Toner Darkness setting offers 10 user-selectable settings to balance print darkness and toner savings. The higher the setting, the darker the print (that is, level 1 is the lightest). The printers ship with a default setting of 8. From level 8 to level 1 offers up to 50% toner savings, thus reducing the cost of printing. The Toner Darkness setting is available through the operator panel under the Quality menu and also accessible from the print driver.
The Automatic Darkness Adjustment system is designed to adjusted toner density in order to achieve a common print darkness across environments, through cartridge and printer life, and between cartridges. This is achieved by measuring real-time print darkness at predetermined intervals throughout cartridge life. Automatic Darkness Adjustment will allow for greater reliability in print quality and uniformity across all cartridges and printers. All this is achieved with no impact to printer performance.
Font support
The InfoPrint 1832 printer resident fonts include support for following:
Emulation Number of scalable fonts Number of bitmapped fonts
------------ ------------------------ -------------------------
PCL 6 89 2
PostScript 158 0
PPDS 39 5
The fonts in the PCL emulation are compatible with the fonts in the HP LaserJet 4550 and include nine additional fonts and many extra symbol sets to support extra languages and applications. Included in the PCL emulation are OCR-A, OCR-B, and Code 3 of 9 barcode fonts. The fonts in the PostScript emulation are compatible with all 136 fonts in Adobe PostScript 3 and include 22 additional fonts.
Additional fonts can be downloaded to the printer RAM, optional user flash, or the hard disk.
Included on the CD-ROM shipped with the printer are screen fonts to match the printer's resident scalable fonts. The Software and Documentation CD also include a variety of downloadable fonts for Hebrew and Arabic.
Features
The printer supports the following features:
Part
number Description
------- ----------------------------------
39V2953 250-Sheet Drawer
39V2954 550-Sheet Drawer
39V2955 250-Sheet Tray
39V2956 550-Sheet Tray
39V2957 2,000-Sheet Drawer
39V2959 200-Sheet Universally Adj Drawer
39V2960 200-Sheet Universally Adj Tray
39V2961 400-Sheet Universally Adj Drawer
39V2962 400-Sheet Universally Adj Tray
39V3532 250-Sheet Duplex
39V2965 Envelope Feeder
39V3533 StapleSmart Finisher
39V3534 Output Expander
39V3535 5-Bin Mailbox
39V3536 High Capacity Output Stacker
39V2691 IPDS & SCS/Tne Card
39V3610 Bar Code Card
39V3463 Decryption Card
39V3360 128 MB Memory
39V3361 256 MB Memory
39V3362 512 MB Memory
39V3593 256 MB Flash Memory
39V3420 80 GB Hard Disk
39V3608 Ethernet 1000BaseTX
39V1524 Ethernet 10/100BaseTX (1 USB port)
39V1525 Ethernet 1000BaseTX (4 USB ports)
75P6854 802.11g Wireless to USB
39V3623 802.11b/g/n Wireless Print Server
39V3423 Parallel 1284-B Interface Card
39V3424 RS-232C Serial Interface Card
75P7029 10 ft. Parallel Cable
75P7030 2-meter USB Cable
39V3618 Korean Font Card
39V3619 Simplified Chinese Font Card
39V3620 Traditional Chinese Font Card
39V3621 Japanese Font Card
39V3615 5 in. Spacer
39V3588 Caster Base
Accessibility by people with disabilities
For hardware offerings:
The following features support use by people with disabilities:
- Controls and latches are operable with one hand and minimal dexterity.
- Keys are discernible by touch without activating them.
- The display, controls, latches, and levers are accessible to someone in a wheel chair.
- Color is used as an enhancement for conveying information, as well as an additional method of distinguishing between buttons, controls, and latches.
| Models |
Model Summary Matrix
| Model | Standard Memory | Maximum Memory | USB Port | Processor | Duplex | Standard 10/100BaseTX |
|---|---|---|---|---|---|---|
| n01 | 128 MB | 640 MB | Standard | 500 MHz | Optional | Yes |
| dn1 | 128 MB | 640 MB | Standard | 500 MHz | Standard | Yes |
| Technical Description |
Performance Specifications
The InfoPrint 1832 maximum print speeds are shown in the following table. Actual performance depends on:
- Interface to the host (parallel, USB or network)
- Host system and application
- Page complexity and content of the page
- Certain printer options installed or selected with the printer
- Available memory in the printer
- Media size, media type, and tray source
- Printer resolution
Note: The following special cases that may impact print speeds:
- Nearly narrow media is defined as media that is wide enough to contact the narrow media sensor but is still not wide enough to continuously run at rated speed (but is dependent on media length), i.e., media approximately 170-209mm in width. Examples are: Executive, and Custom Size media whose width falls into this category. IMPORTANT - When using custom size media, it is critical that the user define the actual width via the Paper Menu - Universal Setup on the op panel for best reliability.
- Narrow media is defined as media that does not contact the narrow media sensor, i.e., media approximately < 170mm in width. Examples are A5 and custom size media whose width falls into this category.
- Envelope conditioning (or thumping) is limited to a max 40 ppm process speed for best reliability. Note that if more than 10 envelopes are fed, they will slow even further due to the narrow media requirement.
- Envelopes in general are fed at a slower speed than other media for best reliability.
Media Width Category Media Width (mm) Page count before slowing down
-------------------- ---------------- ------------------------------
Nearly Narrow 170 - 209 35
Narrow 0 - 169 10
Envelope 0 - 169 10
The table below specifies throughput based on resolution and media size. For a complete range of media sizes supported, see Media Support.
The InfoPrint 1832 time to first print are shown in the following table:
Time to first print (TTFP)
------------------------------------------
Time from standby mode 7.5 sec
Note: Time to first print (TTFP) is the amount of time it takes to print the first page of a print job. TTFP test measure the average time it takes from pressing the "Enter" button on the keyboard to the page exiting the standard output bin.
Print Speeds are shown in the following table:
Media Size Tray 1
---------------------- ------
simplex thru-put up to
Letter (PPM) 45
A4 (PPM) 43
duplex thru-put up to
Letter (PPM) 36
A4 (PPM) 35
Print Area
The InfoPrint 1832 printable area is limited to within 4.2 mm (0.167 in.) of top, bottom, left or right edges of the media. Any information placed outside this specified printable area will not print.
Media Support
The printer comes standard with one 250-sheet paper drawer and a 100-sheet multipurpose feeder (MPF). A 350-sheet output bin is standard. See table below for standard and maximum media capacities.
Input Media Combinations and Capacities (sheets)
Opt. Opt. Opt. Opt.
Std. 550 sht. 550 sht. 550 sht. 2000 sht. Total
drawer MPF drawer drawer drawer drawer Capacity
------ --- -------- -------- -------- --------- --------
Standard 250 100 350
Maximum 250 100 550 550 550 2000 4000
Output Media Capacities (sheets)
Optional
Optional High
Standard Output Capacity Total
Output Bin Expander Stacker Capacity
---------- -------- -------- --------
Standard 350
Maximum 350 550 1850 2750
Media Size Sensing
The table below outlines the sensing strategy for the printer and options.
Opt. 250/550 Hi-cap. input Envelope
Sensing function IP 1832 drawers drawers feeder
---------------------- ------- ------------ ------------- --------
Media size sensing
-Media tray Yes Yes Yes No
-Multipurpose tray No No No No
Media present sensing
-Media tray Yes Yes Yes Yes
-Tray low Yes Yes No No
-Multipurpose tray Yes No No No
Tray present sensing
-Media tray Yes Yes Yes No
-Multipurpose tray No No No No
Output bin near full Yes No No No
Output bin full Yes No No No
Output bin empty No No No No
Envelope conditioning Yes No No No
Other sensing
-Narrow media <7in wide Yes No No No
-Nearly narrow <7in wide Yes No No No
-Pass through No Yes Yes Yes
-Cover open/cartridge Yes No No No
present
-Toner wheel function Yes No No No
-Input sensor Yes No No No
-Fuser exit Yes No No No
Stapling sensing
-Bin empty No No No No
-Paper in stapler No No No No
-Staple cartridge No No No No
present
-Stapler empty No No No No
-Stapler low No No No No
-Stapler access door No No No No
open
Output 5-bin Hi-cap.
Sensing function Expander mailbox output stacker StapleSmart
---------------------- -------- ------- -------------- -----------
Media size sensing
-Media tray No No No No
-Multipurpose tray No No No No
Media present sensing
-Media tray No No No No
-Tray low No No No No
-Multipurpose tray No No No No
Tray present sensing
-Media tray No No No No
-Multipurpose tray No No No No
Output bin near full Yes No Yes Yes
Output bin full Yes Yes Yes Yes
Output bin empty No Yes No Yes
Envelope conditioning No No No No
Other sensing
-Narrow media <7in wide No No No No
-Nearly narrow <7in wide No No No No
-Pass through Yes Yes Yes Yes
-Cover open/cartridge No No No No
present
-Toner wheel function No No No No
-Input sensor No No No No
-Fuser exit No No No No
Stapling sensing
-Bin empty No No No Yes
-Paper in stapler No No No Yes
-Staple cartridge No No No Yes
present
-Stapler empty No No No Yes
-Stapler low No No No Yes
-Stapler access door No No No Yes
open
Input and output source capacities by media types
Stack Approximate
Source Media Height reference capacity
----------------------------- -------------- ------ --------------------
INPUT
Opt. 250-sheet drawer/tray(2) plain paper(1) 25mm 250 sheets (75 gsm)
transparencies 225 transparencies
labels 100 labels(3)
Std. 550-sheet drawer/tray(2) plain paper(1) 62.5mm 550 sheets (75 gsm)
Opt. 550-sheet drawer/tray(2) transparencies 450 transparencies
labels 200 labels(3)
Opt. 2000-sheet drawer/tray(2) plain paper(1) 212mm 2000 sheets (75 gsm)
transparencies N/A N/A
labels N/A N/A
Envelope Feeder(2) envelopes 64mm 85 envelopes (75gsm)
Multipurpose feeder(2) plain paper(1) 10mm 100 sheets (75 gsm)
envelopes 10 envelopes (75gsm)
other various quantities
(4)
OUTPUT
Std. 500-sheet output bin plain paper(1) 85mm 500 sheets (75 gsm)
(1,2) transparencies 300 transparencies
labels 200 labels(3)
envelopes 50 envelopes (75gsm)
Output expander option (1,2) plain paper(1) 80mm 650 sheets (75 gsm)
envelopes 50 envelopes (75gsm)
(6)
5-bin mailbox option (1,2) plain paper(1) 15mm 100 sheets per bin
envelopes N/A
Hi-cap. output expander plain paper(1) 200mm 1850 sheets (75 gsm)
option (1,2) envelopes various quantities
(5)
StapleSmart II finisher(1,2) plain paper(1) 500 sheets (75 gsm)
Note: (1) 20 lb. xerographic paper at ambient environment. (2)Capacity may vary and is subject to media specifications and printer operating environment. (3) Capacity will vary with label material and construction. (4) Capacity will vary depending on weight and type media. (5) Stack height will not reach maximum due to weight of envelopes on one side of option tray causing tilt in tray.
Note: (6) This is an estimate based on the capacity of the standard 550-sheet output bin.
Media Sizes Supported
Input Media for InfoPrint 1832
The "Universal" setting allows the user to use custom sizes up to the maximum specified. There are limitations with the "Universal" setting in that duplexing, rotation of images, and n-up may not work since the printer does not know the exact size of the paper.
Opt Opt Opt Opt
Std 250 200 550 400
Media tray tray UAT tray UAT MPF
------------------------------------ ---- ---- --- ---- --- ---
A4 210x297 mm/8.27x11.7 in. Yes Yes No Yes No Yes
A5 148x210 mm/5.83x8.27 in. Yes Yes No Yes No Yes
A6 105x148 mm/4.13x5.83 in.(1,2) No No Yes No No Yes
JIS-B5 182x257 mm/7.17x10.1 in. Yes Yes No Yes No Yes
Letter 215.9x279.4 mm/8.5x11 in. Yes Yes No Yes No Yes
Legal 215.9x355.6 mm/8.5x14 in. Yes Yes No Yes No Yes
Executive 184.2x266.7 mm/ Yes Yes No Yes No Yes
7.25x10.5 in.
Folio 215.9x330.2 mm/8.5x13 in.(2) Yes Yes No Yes No Yes
Statement 139.7x215.9 mm/5.5x8.5 Yes Yes No Yes No Yes
in.(2)
Universal(3,5) Yes Yes Yes Yes Yes Yes
139.7 x 210 mm to 215.9 x 355.6 mm/
5.5 x 8.27 in. to 8.5 x 14 in.
69.85 x 127 mm to 215.9 x 355.6 mm/ No No Yes No No Yes
2.75 x 5 in. to 8.5 x 14 in.
148 x 182 mm to 215.9 x 355.6 mm/ Yes Yes Yes Yes Yes Yes
5.83 x 7.17 in. to 8.5 x 14 in.
7 3/4 Env. No No No No No Yes
98.4 x 190.5 mm/3.875x7.5 in.
9 Env. No No No No No Yes
98.4 x 225.4 mm/3.875x8.9 in.
Commercial #10 Env. No No No No No Yes
104.8 x 241.3 mm/4.12x9.5 in.
DL Env. 110x220 mm/4.33x8.66 in. No No No No No Yes
Other Envelope(4) No No No No No Yes
98.4 x 162 mm to 176 x 250 mm
3.87 x 6.38 in. to 6.93 x 9.84 in.
Media Types
Paper Yes Yes Yes Yes Yes Yes
Cardstock Yes Yes Yes Yes Yes Yes
Transparencies Yes Yes Yes Yes Yes Yes
Paper Labels Yes Yes Yes Yes Yes Yes
Note: (1) MPF or integrated UAT.
Note: (2) This size does not appear in the Paper Size menu until Tray Size Sensing is turned off.
Note: (3) This size setting formats the page for 215.9 x 355.6 mm (8.5 x 14 in) unless the size is specified by the software application.
Note: (4) Envelopes wider than 4-5 inches may start wrinkling in the printer. The wrinkling depends on media quality and should be evaluated to observe if it is acceptable to the user.
Note: (5) The minimum size width and length for duplex path is 148 x 182 mm (5.83 x 7.17 in).
Opt Opt
2000 Env.
Media drwr feeder Duplex
------------------------------------ ---- ------ ------
A4 210x297 mm/8.27x11.7 in. Yes No Yes
A5 148x210 mm/5.83x8.27 in. No No Yes
A6 105x148 mm/4.13x5.83 in.(1,2) No No No
JIS-B5 182x257 mm/7.17x10.1 in. No No Yes
Letter 215.9x279.4 mm/8.5x11 in. Yes No Yes
Legal 215.9x355.6 mm/8.5x14 in. Yes No Yes
Executive 184.2x266.7 mm/ No No Yes
7.25x10.5 in.
Folio 215.9x330.2 mm/8.5x13 in.(2) No No Yes
Statement 139.7x215.9 mm/5.5x8.5 No No No
in.(2)
Universal(3,5) No No (6)
139.7 x 210 mm to 215.9 x 355.6 mm/
5.5 x 8.27 in. to 8.5 x 14 in.
69.85 x 127 mm to 215.9 x 355.6 mm/ No No No
2.75 x 5 in. to 8.5 x 14 in.
148 x 182 mm to 215.9 x 355.6 mm/ No No Yes
5.83 x 7.17 in. to 8.5 x 14 in.
7 3/4 Env. No Yes No
98.4 x 190.5 mm/3.875x7.5 in.
9 Env. No Yes No
98.4 x 225.4 mm/3.875x8.9 in.
Commercial #10 Env. No Yes No
104.8 x 241.3 mm/4.12x9.5 in.
DL Env. 110x220 mm/4.33x8.66 in. No Yes No
Other Envelope(4) No Yes No
98.4 x 162 mm to 176 x 250 mm
3.87 x 6.38 in. to 6.93 x 9.84 in.
Media Types
Paper Yes No Yes
Cardstock No No Yes
Transparencies No No No
Paper Labels No No No
Note: (1) MPF or integrated UAT.
Note: (2) This size does not appear in the Paper Size menu until Tray Size Sensing is turned off.
Note: (3) This size setting formats the page for 215.9 x 355.6 mm (8.5 x 14 in) unless the size is specified by the software application.
Note: (4) Envelopes wider than 4-5 inches may start wrinkling in the printer. The wrinkling depends on media quality and should be evaluated to observe if it is acceptable to the user.
Note: (5) The minimum size width & length for the duplex path is 148mm x 182mm (5.83 x 7.17 in.).
Output Media for InfoPrint 1832
Opt.
Std. Opt. Opt. hi-cap.
Output Output 5-Bin output
Media bin Expander Mailbox Stacker
------------------------------------ ------ -------- ------- -------
A4 210x297 mm/8.27x11.7 in. Yes Yes Yes Yes
A5 148x210 mm/5.83x8.27 in. Yes Yes No Yes
A6 105x148 mm/4.13x5.83 in.(1,2) Yes No No No
JIS-B5 182x257 mm/7.17x10.1 in. Yes Yes Yes Yes
Letter 215.9x279.4 mm/8.5x11 in. Yes Yes Yes Yes
Legal 215.9x355.6 mm/8.5x14 in. Yes Yes Yes Yes
Executive 184.2x266.7 mm/ Yes Yes Yes Yes
7.25x10.5 in.
Folio 215.9x330.2 mm/8.5x13 in.(2) Yes Yes Yes Yes
Statement 139.7x215.9 mm/5.5x8.5 Yes Yes No Yes
in.(2)
Universal(3,5) Yes Yes No Yes
139.7 x 210 mm to 215.9 x 355.6 mm/
5.5 x 8.27 in. to 8.5 x 14 in.
69.85 x 127 mm to 215.9 x 355.6 mm/ Yes Yes No Yes
2.75 x 5 in. to 8.5 x 14 in.
148 x 182 mm to 215.9 x 355.6 mm/ Yes Yes No Yes
5.83 x 7.17 in. to 8.5 x 14 in.
7 3/4 Env. Yes Yes No Yes
98.4 x 190.5 mm/3.875x7.5 in.
9 Env. Yes Yes No Yes
98.4 x 225.4 mm/3.875x8.9 in.
Commercial #10 Env. Yes Yes No Yes
104.8 x 241.3 mm/4.12x9.5 in.
DL Env. 110x220 mm/4.33x8.66 in. Yes Yes No Yes
Other Envelope(4) Yes Yes No Yes
98.4 x 162 mm to 176 x 250 mm
3.87 x 6.38 in. to 6.93 x 9.84 in.
Media Types
Paper Yes Yes Yes Yes
Cardstock Yes Yes No Yes
Transparencies Yes Yes No Yes
Paper Labels Yes Yes No Yes
Note: (1) MPF or integrated UAT.
Note: (2) This size does not appear in the Paper Size menu until Tray Size Sensing is turned off.
Note: (3) This size setting formats the page for 215.9 x 355.6 mm (8.5 x 14 in) unless the size is specified by the software application.
Note: (4) Envelopes wider than 4-5 inches may start wrinkling in the printer. The wrinkling depends on media quality and should be evaluated to observe if it is acceptable to the user.
Note: (5) The minimum size width & length for the duplex path is 148mm x 182mm (5.83 x 7.17 in.).
Optional Optional
StapleSmart StapleSmart
Media output bin stapler/jogger
------------------------------------ ----------- --------------
A4 210x297 mm/8.27x11.7 in. Yes Yes
A5 148x210 mm/5.83x8.27 in. Yes No
A6 105x148 mm/4.13x5.83 in.(1,2) No No
JIS-B5 182x257 mm/7.17x10.1 in. Yes No
Letter 215.9x279.4 mm/8.5x11 in. Yes Yes
Legal 215.9x355.6 mm/8.5x14 in. Yes Yes
Executive 184.2x266.7 mm/ Yes No
7.25x10.5 in.
Folio 215.9x330.2 mm/8.5x13 in.(2) Yes Yes
Statement 139.7x215.9 mm/5.5x8.5 No No
in.(2)
Universal(3,5) No No
139.7 x 210 mm to 215.9 x 355.6 mm/
5.5 x 8.27 in. to 8.5 x 14 in.
69.85 x 127 mm to 215.9 x 355.6 mm/ No No
2.75 x 5 in. to 8.5 x 14 in.
148 x 182 mm to 215.9 x 355.6 mm/ No No
5.83 x 7.17 in. to 8.5 x 14 in.
7 3/4 Env. No No
98.4 x 190.5 mm/3.875x7.5 in.
9 Env. No No
98.4 x 225.4 mm/3.875x8.9 in.
Commercial #10 Env. No No
104.8 x 241.3 mm/4.12x9.5 in.
DL Env. 110x220 mm/4.33x8.66 in. No No
Other Envelope(4) No No
98.4 x 162 mm to 176 x 250 mm
3.87 x 6.38 in. to 6.93 x 9.84 in.
Media Types
Paper Yes Yes
Cardstock Yes No
Transparencies Yes No
Paper Labels No No
Note: (1) MPF or integrated UAT.
Note: (2) This size does not appear in the Paper Size menu until Tray Size Sensing is turned off.
Note: (3) This size setting formats the page for 215.9 x 355.6 mm (8.5 x 14 in) unless the size is specified by the software application.
Note: (4) Envelopes wider than 4-5 inches may start wrinkling in the printer. The wrinkling depends on media quality and should be evaluated to observe if it is acceptable to the user.
Note: (5) The minimum size width & length for the duplex path is 148mm x 182mm (5.83 x 7.17 in.).
Media Weights
Standard and optional input devices
Std. trays 1 MPF & Opt. 2000-sheet Env.
Material Type 550-sht drawer 250-sht drawer drawer feeder
---------- -------------- -------------- -------------- ---------- ------
Paper Xerographic or 60 to 176 gsm 60 to 135 gsm 60 to 135 N/A
business paper grain long grain long gsm
(16 to 47 lb. (16 to 36 lb. (16 to 36
bond) bond) lb. bond)
Cardstock Index Bristol 163 gsm 120 gsm N/A N/A
maximum (90 lb. bond) (67 lb.bond)
(grain Tag 163 gsm 120 gsm N/A N/A
long)(1) (100 lb. bond) (74 lb.bond)
Cover 176 gsm 135 gsm N/A N/A
(65 lb. bond) (50 lb.bond)
(1,3) (1,3)
Cardstock Index Bristol 199 gsm 163 gsm N/A N/A
maximum (110 lb. bond) (90 lb.bond)
(grain Tag 203 gsm 163 gsm N/A N/A
short)(1) (125 lb. bond) (100 lb.bond)
Cover 216 gsm 176 gsm N/A N/A
(80 lb. bond) (65 lb.bond)
Transpar- Laser printer 138 to 146 gsm 138 to 146 gsm N/A N/A
encies (37 to 39 lb. (37 to 39 lb.
bond) bond)
Labels- Paper 180 gsm 163 gsm N/A N/A
maximum (48 lb. bond) (43 lb. bond)
Envelopes Sulfite, wood- N/A 60 to 105 gsm N/A 60 to
free or up to (16 to 28 lb. 105 gsm
100% cotton bond) (2,3) 16 to
bond 28 lb.
bond)
(2,3)
Note: (1) Grain short is preferred for papers over 135 gsm
Note: (2) 28 lb. bond envelopes are limited to 25% cotton content.
Note: (3) Includes envelopes fed from the multipurpose feeder only.
Standard and optional output devices
Std. output bin,
opt. output expander
& high-capacity
Material Type output stacker 5-bin mailbox
---------- -------------- ------------------------- ---------------------
Paper Xerographic or 60 to 176 gsm grain 60 to 90 gsm
business paper long (16 to 47 lb. bond) (16 to 24 lb. bond)
Cardstock Index Bristol 163 gsm (90 lb. bond) N/A
upper Tag 163 gsm (100 lb. bond) N/A
limit Cover 176 gsm (65 lb. bond) N/A
(grain
long)(1)
Cardstock Index Bristol 199 gsm (110 lb. bond) N/A
upper Tag 203 gsm (125 lb. bond) N/A
limit Cover 216 gsm (80 lb. bond) N/A
(grain
short)(1)
Transpar- Laser printer 138 to 146 gsm N/A
encies (37 to 39 lb. bond)
Labels- Paper 180 gsm (48 lb. bond) N/A
upper
limit
Envelopes Sulfite, wood- 60 to 105 gsm N/A
free or up to (16 to 28 lb. bond) (2,3)
100% cotton
bond
Note: (1) For 60 to 176 gsm paper, grain long fibers are recommended. For papers heavier than 176 gsm, grain short is preferred.
Note: (2) 100% cotton content maximum weight is 24 lb. bond.
Note: (3) 28 lb. bond envelopes are limited to 25% cotton content.
Additional Media Guidelines for InfoPrint 1832
Follow the media guidelines below for successful printing:
Paper designed for use with xerographic copiers should provide satisfactory print quality and feed reliability. Other types of supplies may be suitable. It is recommended that users test any particular brand for suitability to their applications. Refer to the printers User's Guide for additional media specifications.
Paper
- Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
- Colored papers must be able to withstand 220 deg C (446 deg F) fusing temperature.
- Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with these printers.
The following paper types are not recommended for use with the printer:
- Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper.
- Preprinted papers with chemicals that may contaminate the printer.
- Preprinted papers that can be affected by the temperature in the printer fuser.
- Preprinted papers that require a registration (the precise print location on the page) greater than +2.3 mm (+0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.
- Rough-edged, rough or heavily textured surface papers, or curled papers.
- Recycled papers that fail EN12281:2002 (European).
- Paper weighing less than 60 g/m2 (16 lb).
- Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.
- Recycled paper less than 80g/sqm may cause unacceptable results.
Recycled paper
As an environmentally conscious company, InfoPrint Solutions Company supports the use of recycled office paper produced specifically for use in laser (electrophotographic) printers. The printers are consistently tested with recycled paper (20-100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. InfoPrint Solutions Company has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.
- Low moisture content (4-5%)
- Suitable smoothness (100-200 Sheffield units)
- Suitable sheet-to-sheet coefficient of friction (0.4-0.6)
- Sufficient bending resistance in the direction of feed
Recycled paper, paper of lower weight (<60 gsm / 16 lb bond) and/or lower caliper (<3.8 mils / 0.1 mm), and paper that is cut grain-short for portrait (or short-edge) fed printers may have lower bending resistance than is required for reliable paper feeding. Before using these types of paper for laser (electrophotographic) printing, consult your paper supplier. Remember that these are general guidelines only and that paper meeting these guidelines may still cause paper feeding problems.
Envelopes
- If envelope wrinkling occurs refer to the User's Guide for correct loading and stacking of envelopes.
- All envelopes should be new, unused, and without package damage.
- Envelopes with excessive curl or twist exceeding 6.0 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
- Minimum weight: 75 gsm (20lb.)
- The following envelopes should not be used:
- Envelopes with windows, holes, perforations, cutouts, or deep embossing
- Envelopes with metal clasps, string ties, or metal folding bars
- Envelopes with exposed flap adhesive when the flap is in the closed position
- For best results, printing on new 90 gsm (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
- Under high humidity conditions (over 60%) the envelopes may seal during printing.
Transparencies
- Use letter or A4-size sheets only
- Transparencies specifically designed for xerographic copy machines or laser printers may be used with the InfoPrint 1832
- Single-sided transparencies designed for color laser printers may not work well
Labels
Labels should be selected using guidelines found in the User's Reference or the Cardstock and Label Guide and tested for acceptability. Paper labels are supported for occasional use only. VINYL AND POLYESTER LABELS ARE NOT SUPPORTED.
Print Quality
General Statement
Due to the InfoPrint 1832 print technology, paper designed for use with xerographic copiers should provide satisfactory print quality and feed reliability. Other types of supplies may be suitable. It is recommended that users test any particular brand for suitability to their applications. Refer to the User's Guide for additional media specifications.
Data Streams
- Host Based
- Microsoft XPS
- PCL 5
- PCL 6/XL
- PostScript 3
- PPDS Migration Tool
- PDF v1.6 emulation
- HTML
- DirectImage
Operator Panel
Display
Four-line160x64 pixel APA backlit gray scale display: Non-double byte languages use a proportional font, supporting four lines with roughly 20 characters per line. Double byte characters, at 16x16 pixels in size, support four lines of 10 characters per line maximum.
Numeric Pad
The numeric pad consists of numbers, an upper case button (Shift Lock), and a backspace button. The "5" button has surrounding bumps for non-visual orientation.
Two-Toned LED
The two-toned LED button is green and red. The lighting/flash patterns are:
- Blinking green: Device warming up, processing data, or printing
- Solid red: User intervention occurring or required
- Solid green: Ready state
Navigational Elements
An intuitive grouping of navigation elements is placed close to the display panel. Up/Down navigation arrows navigate up and down lists. Left/Right buttons navigate within the screens.
User Workflow Separated from Administration/Configuration
User and print job related workflow is accessed via the Home screen. Administrative related workflow is accessed via the Menus button.
Home States
There are two Home States: HomePrime and HomeStatus. HomePrime is the legacy "Ready" state. HomeStatus is the legacy "Busy" state.
Toner at A Glance
A graphical representation of toner cartridge levels is available.
Show Me
Additional information is provided for a select group of required user interventions via a "Show me" selection. "Show me" selections contain detailed steps (text and graphics with animation) that instruct the user how to clear the specified intervention.
Tell Me More
Additional information is provided for a select group of user interventions via a "Tell me more" selection. "Tell me more" selections contain more detail (text only, no graphics) about the specific, such as why it has occurred and/or what the user can do to clear the intervention.
USB Direct Interface
Direct USB connectivity allows individuals to print files directly to the printer using an approved USB flash memory device. Through the printer's USB Direct interface on the printer's operator panel, a user can simply insert the USB flash memory device, select the appropriate file and print with the printer.
Direct USB requires a supported USB flash memory device. The following have been tested and approved for USB flash memory devices:
- Lexar Firefly 512MB (Part Number JDFF512-431EM)
- Lexar Firefly 1GB (Part Number JDFF1GB-431TO)
- SanDisk Cruizer Micro 512MB (Part Number SDCZ4-512-A10)
- SanDisk Cruizer Micro 1GB (Part Number SDCZ4-1024-A10)
- Sony 512MB (Part Number USM512J)
- Sony 1GB (Part Number USM1GJ)
While other USB flash drives have not been tested and therefore cannot be approved by InfoPrint Solutions Company, these products may function if the storage device meets the following qualifications:
- Supports the USB 2.0 specification, specifically supporting the High Speed mode
- Use the FAT file system
In addition to the above hardware requirements, PDF files used with Direct USB printing must support PDF standard version 1.7 or earlier. PDF files with restricted printing permissions or encryption are not supported.
Certifications
The InfoPrint 1832 printer complys with the global safety standard for Information Technology Equipment, IEC 60950, and its country equivalents in the markets we serve. The following sections highlight the approvals and certifications that printer is expected to receive.
115V Version
USA,Canada Energy Star (duplex models)
Canada Canadian Standards Assoc. CAN/CSA-C22.2 No. 950-95,
Third Edition, Information Technology Equipment
deviations D1 & D2
Canada EMC Compliance Statement EMC Compliance Statement
Canada ICES Class B
USA FCC Class B per FCC Rules, Parts 2 and 15
USA UL 60950 3rd Edition UL 60950 3rd Edition
USA U.S. FDA CDRH @ Registration - Laser Safety - per 21
CFR Chapter I, Subchapter J, Section 1040
USA IEC 320-1
International Standard Electrical Appliance
Connectors
Printer Management Utilities
MarkVision Professional
(Available from https://www.markvisionprofessional.com)
MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser or client application. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities. These devices are supported by MarkVision Professional v11.2 with no additional plug-ins.
MarkVision Messenger
(Available from https://www.markvisionprofessional.com)
MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.
Software Installation and Distribution tools
This Install utility provides a very powerful method to install or uninstall printer software in Windows 2000, Windows XP, or Windows Server 2003 environments. Through the use of the Script Install utility, System Administrators can easily perform mass rollouts of these printers by creating custom scripts to perform local or remote printer software installations on end user workstations. When combined with the Driver Profiler utility, I/T shops can centrally create and deploy custom printing environments for each remote location. Together, these utilities drastically reduce the time required to install printer software in a distributed environment.
Printing Solution for Novell systems
(Available from https://www.infoprint.com)
This Printing Solution for Novell systems offers administrators more control over these printers. This all-inclusive package provides support for both NDPS and iPrint printing systems on NetWare 5.1, 6.0, 6.5 servers and NOES for NetWare servers. The package consists of Novell's NDPS gateway coupled with InfoPrint Solutions Company custom control snap-ins for both NetWare Administrator (NWAdmin) and iManager. By offering custom support for both NetWare Administrator and iManager management utilities, this offering allows administrators to take full control of InfoPrint Solutions Company printers in a Novell printing environment.
Host Software
Windows Systems Drivers
To maximize the user experience, InfoPrint Solutions Company offers system, PCL emulation and PostScript emulation drivers for Windows 2000, XP, Server 2003, Vista and Server 2008 platforms. Systems drivers for Windows provide the most comprehensive set of printing features available for InfoPrint Solutions Company products. Offering an easy-to-use interface and time saving preset features, the InfoPrint Solutions Company drivers allow users to access popular features intuitively, while utilizing Microsoft's rendering engine to provide a solid printing experience. InfoPrint Solutions Company Status Messenger replaces the prior status window.
Universal Driver
The InfoPrint Solutions Company Universal Driver packages in PCL and PS emulations are compatible with InfoPrint printers. The Universal Drivers for Windows promote efficiency in the printing environment, while maintaining the ease-of-use of our system drivers.
Support and training are simplified, as one driver can print to multiple printers, including single function and multifunction, color and monochrome, desktop and departmental. The same graphic user interface has been used to maintain continuity with our product specific drivers. Many cost-saving options, like duplex and multi-page printing, and security options like Confidential Print, as part of our Print and Hold options, are available to maximize output, minimize cost, and maintain security. The Universal Driver packages are available for various operating systems in both PCL and PostScript emulations.
Printer Drivers for UNIX and Linux systems
These printer drivers reduce the complications of printing in UNIX and Linux environments. The InfoPrint Solutions Company printer drivers provide fully scriptable command-line options. When running in X-Windows mode, The printer drivers make it easy to access many popular printer features without memorizing command line options through a GUI interface.
InfoPrint Solutions Company provides PPD files for Linux distributions using the Common Unix Printing System (CUPS). These PPD files provide the user with access to popular printing features while allowing the user to take full advantage of built-in CUPS capabilities.
InfoPrint Solutions Company Printer Software for Macintosh
InfoPrint Solutions Company offers Max OS printing software (PPDs, PDEs, etc.) to enhance the printing experience in an Apple environment. These files allow Mac OS 9 and Mac OS X users access to advanced printing features included with this product. Printer Status complements the driver software by providing printer status feedback from a remote location. Other utilities such as Printer File Loader and Printer Settings provide means to perform targeted tasks.
Microsoft Windows Certification
The InfoPrint Solutions Company laser printers include Microsoft Certified and digitally signed printer drivers and signed USB scan drivers. The driver certification indicates a high level of compatibility between the Windows operating system and the InfoPrint Solutions Company printer. Printer drivers for these products have received certification under the following operating systems:
- Windows XP
- Home Edition
- Professional Edition
- Professional x64 Edition
- Windows Server 2003
- Standard Edition
- Enterprise Edition
- Standard x64 Edition
- Enterprise x64 Edition
- Windows Vista
- Home Basic Edition
- Home Premium Edition
- Business Edition
- Enterprise Edition
- Ultimate Edition
- Home Basic x64 Edition
- Home Premium x64 Edition
- Business x64 Edition
- Enterprise x64 Edition
- Ultimate x64 Edition
- Windows Server 2008
- Standard Edition
- Enterprise Edition
- Datacenter Edition
- Standard x64 Edition
- Enterprise x64 Edition
- Datacenter x64 Edition
Software
Printer drivers are provided on the Drivers and Utilities CD that is packaged with the printer. See Publications section for details.
The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.
Operating Systems
InfoPrint 1832 is compatible with applications running under the following operating systems for either local or network connections: For information about USB connections, see Local Connections.
Apple Macintosh(1)
- Apple Mac OS 9 (9.2) (8)
- Apple Mac OS X (10.2, 10.3, 10.4, or 10.5)
Microsoft Windows(1)
- Microsoft Windows 95 4.00950 (OSR2) or later (10)
- Microsoft Windows 98.1st Edition (10)
- Microsoft Windows 98.2nd Edition (10)
- Windows Me (10)
- Microsoft Windows NT 4 SP6 (10)
- Microsoft Windows NT 4 Server SP6 (10)
- Microsoft Windows 2000 Professional
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Server running Terminal Services
- Microsoft Windows 2000 Server running Terminal Services with Citrix MetaFrame Presentation Server 3.0
- Microsoft Windows 2000 Server running Terminal Services with Citrix MetaFrame Presentation Server 4.0
- Microsoft Windows XP Home
- Microsoft Windows XP Professional
- Microsoft Windows XP Professional x64 Edition
- Microsoft Windows Server 2003 Standard Edition
- Microsoft Windows Server 2003 Standard Edition Running Terminal Server
- Microsoft Windows Server 2003 x64 Standard Edition
- Microsoft Windows Server 2003 x64 Standard Edition Running Terminal Server
- Microsoft Windows Server 2003 Enterprise Edition
- Microsoft Windows Server 2003 Enterprise Edition Running Terminal Server
- Microsoft Windows Server 2003 Enterprise x64 Edition
- Microsoft Windows Server 2003 Enterprise x64 Edition Running Terminal Server
- Microsoft Windows Server 2003 Standard Edition running Terminal Services with Citrix MetaFrame Presentation Server 3.0
- Microsoft Windows Server 2003 Standard Edition running Terminal Services with Citrix MetaFrame Presentation Server 4.0
- Microsoft Windows Server 2003 Enterprise Edition running Terminal Services with Citrix MetaFrame Presentation Server 4.0
- Microsoft Windows Server 2003 Enterprise Edition running Terminal Services with Citrix MetaFrame Presentation Server 4.5
- Microsoft Windows Server 2003 Standard x64 Edition running Terminal Services with Citrix MetaFrame Presentation Server 4.0 for Microsoft Windows Server 2003 x64 Edition
- Microsoft Windows Server 2003 Enterprise x64 Edition running Terminal Services with Citrix MetaFrame Presentation Server 4.0 for Microsoft Windows Server 2003 x64 Edition
- Microsoft Windows Server 2003 Standard Edition running Terminal Services with Citrix MetaFrame Presentation Server 4.5
- Microsoft Windows Server 2003 Enterprise Edition running Terminal Services with Citrix MetaFrame Presentation Server 3.0
- Microsoft Windows Server 2003 Standard x64 Edition running Terminal Services with Citrix MetaFrame Presentation Server 4.5 Microsoft Windows Server 2003 x64 Edition
- Microsoft Windows Vista Basic Edition
- Microsoft Windows Vista Home Basic Edition
- Microsoft Windows Vista Home Basic x64 Edition
- Microsoft Windows Vista Home Premium Edition
- Microsoft Windows Vista Home Premium x64 Edition
- Microsoft Windows Vista Business Edition
- Microsoft Windows Vista Business x64 Edition
- Microsoft Windows Vista Enterprise Edition
- Microsoft Windows Vista Enterprise x64 Edition
- Microsoft Windows Vista Ultimate Edition
- Microsoft Windows Vista Ultimate x64 Edition
- Microsoft Windows Server 2008 Standard Edition
- Microsoft Windows Server 2008 Standard x64 Edition
- Microsoft Windows Server 2008 Standard Edition running Terminal Server
- Microsoft Windows Server 2008 Standard x64 Edition running Terminal Server
- Microsoft Windows Server 2008 Enterprise Edition
- Microsoft Windows Server 2008 x64 Enterprise Edition
- Microsoft Windows Server 2008 Enterprise Edition running Terminal Server
- Microsoft Windows Server 2008 Enterprise x64 Edition running Terminal Server
- Microsoft Windows Server 2008 Datacenter Edition
- Microsoft Windows Server 2008 Datacenter x64 Edition
- Microsoft Windows Server 2008 Datacenter Edition running Terminal Server
- Microsoft Windows Server 2008 Datacenter x64 Edition running Terminal Server
Novell
- Novell NetWare 5.1 (support Pack 6 or later) with NDPS
- Novell NetWare 6.0 (support Pack 3 or later) with NDPS
- Novell NetWare 6.5 with iPrint or NDPS
- Novell NetWare 5.x, 6.x with iPrint or NDPS
- Novell Open Enterprise Server for NetWare with iPrint or NPDS
- SUSE-based Open Enterprise Server (Windows Client support)
UNIX(4)
- HP-UX 11.11, 11.23, 11.31
- Sun Solaris SPARC 7, 8, 9, 10
- Sun Solaris x86 10
- IBM AIX 5.2, 5.3, 6.1 (Colon files and enhanced printer drivers)
Linux
- SuSE Linux Enterprise Server 8
- SuSE Linux Enterprise Server 9
- SuSE Linux Enterprise Server 10
- SuSE Linux Enterprise Desktop 10
- OpenSUSE 10.2
- OpenSUSE 10.3
- OpenSUSE 11.0
- Red Hat Enterprise Linux WS 3
- Red Hat Enterprise Linux WS 4
- Red Hat Enterprise Linux WS 5
- Debian GNU/Linux 4.0
- Linspire 6.0
- Red Flag Linux Desktop 5.0 (Simplified Chinese only)
- Red Flag Linux Desktop 6.0 (Simplified Chinese only)
- Linpus Linux Desktop 9.2 (Traditional Chinese only)
- Linpus Linux Desktop 9.3 (Traditional Chinese only)
- Ubuntu 7.10
- Ubuntu 8.04 LTS
Other
- Virtually any platform supporting TCP/IP(5)
- IBM iSeries and AS/400 Systems with TCP/IP with OS/400 V3R1 or later using OS/400 Host Print Transform(5)
- SAP Device Type support
Infoprint Manager
Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.
Physical Specifications
Dimensions
Width Depth Height Weight
--------- --------- --------- ---------
n01 425.0 mm 493.2 mm 348.5 mm 18.4 kg
model (16.7 in) (19.4 in) (13.7 in) (40.6 lb)
250-Sheet 421.0 mm 640.0 mm 54.0 mm 5.0 kg
Duplex (16.6 in) (25.2 in) (2.13 in) (11.1 lb)
550-Sheet 421.0 mm 510.2 mm 130.4 mm 4.0 kg
Drawer (16.6 in) (20.1 in) (5.1 in) (9.0 lb)
250-Sheet 421.0 mm 510.2 mm 90.0 mm 3.2 kg
Drawer (16.6 in) (20.1 in) (3.5 in) (7.0 lb)
2,000-Sheet 421.0 mm 510.2 mm 357.0 mm 16.8 kg
Drawer (16.6 in) (20.1 in) (14.1 in) (37.0 lb)
Output 421.0 mm 378.0 mm 160.0 mm 2.6 kg
Expander (16.6 in) (14.9 in) (6.2 in) (5.7 lb)
5-Bin 421.0 mm 330.0 mm 315.0 mm 5.2 kg
Mailbox (16.6 in) (12.9 in) (12.4 in) (11.5 lb)
High-Cap. 421.0 mm 378.0 mm 323.0 mm 4.5 kg
Output (16.6 in) (14.9 in) (12.7 in) (9.9 lb)
Stacker
Staple- 433.5 mm 403.2 mm 320.4 mm 7.2 kg
Smart (17.1 in) (15.9 in) (12.6 in) (15.8 lb)
Envelope (2) 233.0 mm (2) 2.0 kg
Feeder (9.2 in) (4.4 lb)
(closed position)
Envelope (2) 350.0 mm (2) 2.0 kg
Feeder (13.8 in) (4.4 lb)
(support fully
extended)
5 in. 421.0 mm 510.2 mm 130.4 mm 3.4 kg
Spacer (16.6 in) (20.1 in) (5.1 in) (7.5 lb)
Caster 768.0 mm 801.0 mm 107.0 mm 38.5 kg
Base (30.3 in) (31.6 in) (4.2 in) (85 lb)
Note: (2) Envelope feeder fits within height and width of printer.
Minimum clearance requirements
Left side Right side Front Rear Top
--------- ---------- -------- --------- --------
304.8 mm 304.8 mm 508.0 mm 304.8 mm 114.3 mm
(12 in) (12.0 in) (20 in) (12.0 in) (4.5 in)
Note: When installing the printer, the customer should allow enough room to access the paper trays and paper exits.
Operating Environment
Operating environment
Temperature 15.6 to 32.2 C (60 to 90 F)
Humidity 8% to 80% relative humidity
Altitude 0 to 3,048 meters (10,000 ft)
Storage and shipping environment (packed)
Temperature -40 to 43.3 C (-40 to 110 F)
Humidity 5% to 95% relative humidity
Altitude 0.25 atmospheric pressure
(equivalent to 10,300 m;
34,000 feet)
Storage and shipping environment (Unpacked)
Temperature 0 to 40 C (32 to 104 F)
Humidity 5% to 80% relative humidity
Electrical specifications
Low voltage models
- 100 - 127 V ac at 47 to 63 Hz, nominal
- 90 - 137 V ac, extreme
Average power consumption
The following table specifies nominal average power requirements for the base printer configuration for InfoPrint 1832.
Printing states
-------------------------------------------
Off 0 W
Power Saver Mode 12 W
Ready Mode 80 W
Continuous Printing
1-sided 640 W
2-sided 540 W
Maximum current while printing
110-127 Volts 7.6 a
220-240 Volts 4.1 a
Printer Fuser Lamp 925 W
Note: Using a 220 V ac to 110 V ac power converter with the low voltage model is not recommended.
Note: All duplex models are ENERGY STAR compliant.
Acoustics
All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1 meter average Declared
sound pressure sound power
Mode level level
------------------------- --------------- -----------
Idle (standby mode) 30 dBA 4.3 Bels
Simplex printing 53 dBA
Duplex printing 56 dBA N/M
N/M Not measured
Note: Measurements apply to 300 dpi, 600 dpi, and 1200 printing.
InfoPrint Solutions Company has implemented features on the InfoPrint 1832 that allow the customer to easily select various operating modes in order to reach their sustainability goals related to environmental and noise pollution. These new features are Eco mode and Quiet mode.
Eco mode optimizes printer settings to minimize the environmental impact while Quiet mode significantly reduces acoustics.
Quiet mode setting
Off This configuration represents a restoration of the factory default
state of the various settings that will be changed by the other
settings below. This mode will support performance claims for the
product.
On Printer will be configured to run in a reduced noise mode.
Primarily, the user is trading performance for quieter operation.
The following settings areas are affected:
- Process speed is reduced
- Beeps are disabled or minimized (key press, alarms, and so on)
- Upon receiving a print job, engine motors are not ramped up
prior to the job being ready to actually print
- Fans run in reduced speed or turned off
| Publications |
All hardcopy publications are downloadable from the InfoPrint Solutions Company Web site:
- https://www.infoprint.com
The following publications are shipped with the products:
- Software and Documentation CD
- User's Guide (contained on CD)
This will be available in the following languages: Arabic, English, Danish, Dutch, Finnish, French, German, Hebrew, Italian, Korean, Norwegian, Polish, Brazilian Portuguese, Romanian, Russian, Spanish, Swedish, Simplified Chinese, Traditional Chinese, and Turkish.
Special Feature Codes -- Chargeable
Mach Feature Part
type Model number number Description UPC
---- ----- ------- ------- ------------------------------ ---------------
4551 n01 39V2779 InfoPrint 1832 8-83436-03453-1
4551 dn1 39V2780 InfoPrint 1832 8-83436-03454-8
39V2953 250-Sheet Drawer 8-83436-04181-2
39V2954 550-Sheet Drawer 8-83436-04165-2
39V2955 250-Sheet Tray 8-83436-04166-9
39V2956 550-Sheet Tray 8-83436-04167-6
39V2957 2,000-Sheet Drawer 8-83436-04168-3
39V2959 200-Sheet Universally Adj Dwr 8-83436-04170-6
39V2960 200-Sheet Universally Adj Tray 8-83436-04171-3
39V2961 400-Sheet Universally Adj Dwr 8-83436-04172-0
39V2962 400-Sheet Universally Adj Tray 8-83436-04173-7
39V3532 250-Sheet Duplex 8-83436-04671-8
39V2965 Envelope Feeder 8-83436-04176-8
39V3533 StapleSmart Finisher 8-83436-04672-5
39V3534 Output Expander 8-83436-04673-2
39V3535 5-Bin Mailbox 8-83436-04674-9
39V3536 High Capacity Output Stacker 8-83436-04675-6
39V2691 IPDS & SCS/Tne Card 8-83436-04557-5
39V3610 Bar Code Card 8-83436-04683-1
39V3593 256 MB Flash Memory 8-83436-04509-4
39V3420 80 GB Hard Disk 8-83436-04125-6
39V3608 Ethernet 1000BaseTX 8-83436-04676-3
39V3615 5 in. Spacer 8-83436-04700-5
39V3588 Caster Base 8-83436-04684-8
ServicePacs
Machine Electronic
Type Model Description Part Number
------- ----- ------------------------------- -----------
4551 All SVCPAC PTR 2YR EZS/NBD 54Y4902
4551 All SVCPAC PTR 3YR EZS/NBD 54Y4903
4551 All SVCPAC PTR 1YR IOR 9X5/NBD 54Y4904
4551 All SVCPAC PTR 2YR IOR 9X5/NBD 54Y4905
4551 All SVCPAC PTR 3YR IOR 9X5/NBD 54Y4906
4551 All SVCPAC PTR 1YR IOR 24X7/SD 54Y4907
4551 All SVCPAC PTR 2YR IOR 24X7/SD 54Y4908
4551 All SVCPAC PTR 3YR IOR 24X7/SD 54Y4909
4551 All SVCPAC PTR 1YR IOR EZS/NBD (MA) 54Y4910
4551 All SVCPAC PTR 2YR IOR EZS/NBD (MA) 54Y4911
4551 All SVCPAC PTR 1YR IOR 9X5/NBD (MA) 54Y4912
4551 All SVCPAC PTR 2YR IOR 9X5/NBD (MA) 54Y4913
4551 All SVCPAC PTR 1YR IOR 24X7/SD (MA) 54Y4914
4551 All SVCPAC PTR 2YR IOR 24X7/SD (MA) 54Y4915
Printer Features
All printer features are customer installable.
Input, Output and Other Media Features
The range of media weights, types and sizes supported by each of these options is described under Media Support. The maximum configuration of paper options supported by each printer model is also described within Media Support.
The InfoPrint 1832 media features include:
(P/N 39V2953) 250-Sheet Drawer
- Minimum required = 0, maximum allowed = 4
- Prerequisite =none, Co-requisite = none
This input option can be installed beneath the printer to offer an added input source which holds approximately 250 sheets of 20 lb. Paper. Multiple optional drawers are supported simultaneously.
(P/N 39V2954) 550-Sheet Drawer
- Minimum required = 0, maximum allowed = 4
- Prerequisite =none, Co-requisite = none
This optional input source installs beneath the printer, and it holds approximately 550 sheets of (20 lb.) paper. Multiple optional drawers are supported simultaneously.
(P/N 39V2955) 250-Sheet Tray
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite =none, Co-requisite = none
For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 250 sheets of (20 lb.) paper.
(P/N 39V2956) 550-Sheet Tray
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite =none, Co-requisite = none
For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 550 sheets of (20 lb.) paper.
(P/N 39V2957) 2,000-Sheet Drawer
- Minimum required = 0, maximum allowed = 1
- Prerequisite =none, Co-requisite = none
This optional input source is designed to be installed beneath the printer. This option holds approximately 2,000 sheets of (20 lb.) paper.
This optional input source is designed to be installed beneath the printer. This option holds approximately 2,000 sheets of (20 lb.) paper.
(P/N 39V2959) 200-Sheet Universally Adjustable Drawer
- Minimum required = 0, maximum allowed = 4
- Prerequisite =none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 200-sheet UAT is 3x5 inches if none of the other options are installed above it. It is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.
(P/N 39V2960) 200-Sheet Universally Adjustable Tray
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite =none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 200-sheet UAT is 3x5 inches if none of the other options are installed above it. It is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.
(P/N 39V2961) 400-Sheet Universally Adjustable Drawer
- Minimum required = 0, maximum allowed = 4
- Prerequisite =none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x7 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 550-sheet integrated tray in the appropriate base printer.
(P/N 39V2962) 400-Sheet Universally Adjustable Tray
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite =none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x7 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 550-sheet integrated tray in the appropriate base printer.
(P/N 39V3532) 250-Sheet Duplex
- Minimum required = 0, maximum allowed = 1
- Prerequisite =none, Co-requisite = none
This option offers two-sided printing capability. It is designed to complement the printers with an integrated 250-sheet input drawer.
(P/N 39V2965) Envelope Feeder
- Minimum required = 0, maximum allowed = 1
- Prerequisite =none, Co-requisite = none
Although occasional envelope printing is supported through the printer's multi-purpose tray, this option is available for more frequent envelope printing. It holds up to 85 envelopes (20lb or 75 gsm).
(P/N 39V3533) StapleSmart Finisher
- Minimum required = 0, maximum allowed = 1
- Prerequisite =none, Co-requisite = none
The StapleSmart Finisher is a compact, modular, finishing solution and offers an additional output bin, and single-position stapling for A4, letter, legal, or folio paper sizes, stapling up to 50 sheets per set (20 lb., 75 gsm). It also offers dual position job offset and high capacity stacking to address high volume network printing demands. Smart sensing indicates when the staple supply is low as well as when staples run out. The output bin supports up to 500 sheets of unstapled paper (20 lb., 75 gsm). The StapleSmart can staple a maximum of 50 sheets per set in A4, Letter, Legal and Folio sizes. Staple cartridges contain 5,000 staples. Refill staple cartridges are available in packages of 3 cartridges. For additional output, one output expander can be placed under the Finisher. Output bin supports stacking of paper, card stock and transparencies.
(P/N 39V3534) Output Expander
- Minimum required = 0, maximum allowed = 1
- Prerequisite =none, Co-requisite = none
This output option installs above the printer's primary output bin. It offers an additional output destination, which holds up to 550 sheets of 20 lb paper (75 gsm). Multiple output expanders are supported, as indicated in Media Support.
(P/N 39V3535) 5-Bin Mailbox
- Minimum required = 0, maximum allowed = 2
- Prerequisite =none, Co-requisite = none
This option offers five output destinations in one. Each of the 5 bins on this option supports approximately 100 pages (20 lb, 75 gsm) of paper. The printer support two of these options, for a total of ten additional bins or an additional capacity of 1000 sheets of output.
(P/N 39V3536) High Capacity Output Stacker
- Minimum required = 0, maximum allowed = 1
- Prerequisite =none, Co-requisite = none
This option is a solution for very large print jobs that need to be sent as a whole to one large bin (as opposed to splitting the large job up to separate smaller bins). The High-Capacity Output Stacker holds approximately 1850 sheets (20 lb paper, 75 gsm). This option is designed to install directly above the printer's primary output bin. The printer supports an output expander in addition to the High Capacity Output Stacker, for a total capacity of up to 2,750 pages of output. When both an output expander and High Capacity Output Stacker are installed, the output expander must be installed above the High Capacity Output Stacker.
Memory and Flash Memory Features
The InfoPrint 1832 has one slot for additional memory DIMMs and one slot for flash memory cards or font cards.
The memory features include the following SDRAM features:
(P/N 39V3360) 128 MB Memory DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 39V3361) 256 MB Memory DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 39V3362) 512 MB Memory DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The flash memory features include:
(P/N 39V3593) 256 MB Flash Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The hard disk feature includes:
(P/N 39V3420) 80 GB Hard Disk
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This plugs in the hard disk slot.
The optional DBCS (Double-Byte Character Set) Font Cards provide printer resident fonts for use printing Simplified Chinese, Traditional Chinese, Japanese and Korean. The Chinese and Japanese font cards also contain a display font used for displaying Chinese and Japanese on some MFP devices. The DBCS Font Cards are suitable for use in a range of InfoPrint Solutions Company printers and MFPs. Fonts contained in these cards emulate those provided in Microsoft Windows. The use of printer-resident fonts in the card improves performance and minimizes network traffic since less data is downloaded to the printer. Each font card supports encodings appropriate for the language, including Adobe CID encodings.
(P/N 39V3619) Simplified Chinese Font Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 39V3620) Traditional Chinese Font Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
These two cards are for use with PCL and PostScript emulation. DBCS font support is available for the following languages:
- Simplified Chinese for China with two scalable print fonts and one display font.
- Traditional Chinese for Taiwan with two scalable print fonts and one display font.
The fonts used with the PCL emulation are compatible with the fonts in the HP LaserJet Language DIMM Memory options for Traditional Chinese and Simplified Chinese, which are compatible with the HP LaserJet 4050, 4000, 4000 N, 4000 T and 4000 JN. These fonts are available in the PostScript emulation and are compatible with Adobe PostScript 3.
(P/N 39V3621) Japanese Font Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The Japanese Font Card contains two scalable print fonts for use with PCL and PostScript emulation and one display font. The Postscript fonts are compatible with Adobe PostScript 3 and emulate Adobe PostScript fonts such as those in the Ricoh NX750. The fonts used with the PCL emulation are compatible with the fonts in the HP LaserJet Language DIMM Memory options for Japanese, which are compatible with the HP LaserJet 4050, 4000, 4000 N, 4000 T and 4000 JN.
(P/N 39V3618) Korean Font Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The Korean Font Card contains eight scalable print fonts for use with PCL and PostScript emulation and is compatible with Adobe PostScript 3. The fonts used with the PCL emulation are compatible with the fonts in the HP LaserJet Language DIMM Memory options for Korean, which are compatible with the HP LaserJet 4050, 4000, 4000 N, 4000 T and 4000 JN.
Application Solution features
These features plug into the one application solution slot.
(P/N 39V3610) Bar Code Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = IPDS & SCS/Tne Card or Decryption Card
Bar Code capabilities included on the card provide the ability to algorithmically generate more than forty seven of the most popular industry standard bar codes, including Datamatrix, QR Code, and Codablock F. The bar code function emulates HP printers with an HP BarCodes & More font solution, JetCAPS BarDIMM or JetCAPS BarSIMM (v. 2.0b).
(P/N 39V3463) Decryption Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = IPDS & SCS/Tne Card or Bar Code Card
The Decryption Card supports AES encryption using key and block lengths of 128, 192, and 256 bits, providing robust security for sensitive documents. It also supports the use of Session or dynamic encryption keys, which greatly reduces management overhead. Session keys are automatically and randomly generated with each print job, ensuring that a unique key is applied to each print job.
(P/N 39V2691) IPDS & SCS/Tne Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = Bar Code Card or Decryption Card
This feature provides configuration flexibility and compatibility for AFP/IPDS or SCS printing on TCP/IP LAN printers. It is compatible with IBM mainframe or IBM iSeries and AS/400 applications that generate SCS (LU1) output or with applications that output AFP/IPDS through the Print Services Facility (PSF).
This feature provides IS or IT managers an affordable printing solution in a distributed network or on a local area network for applications or software that generate AFP/IPDS or SCS. The IPDS and SCS/TNe Card offers customers the following benefits:
- Print PostScript, PCL, AFP/IPDS, SCS, and other local area network printer documents from mainframe, iSeries, or AS/400 systems on one printer.
- Supports IPDS FS45 for full color printing. On monochrome printers, color documents can be transformed to black or shades of gray, based upon the IPDS menu Color Mode setting.
- Support for the following object types: Encapsulated PS, Encapsulated PS with Transparency, TIFF and GIFF
- IPDS N-up and N-up Explicit Page Placement support. Print 1 to 4 partitions per side or 8 partitions per sheet when printing duplex pages.
- IPDS PDF417, DataMatrix, Maxicode and Quick Response (QR) 2D bar code support in the bar code tower.
- United States Postal Service 4 state bar code support (Intelligent Mail Barcode).
- Download DBCS outline and bitmap fonts from the host in IPDS. Support for Simplified Chinese, Traditional Chinese, Korean, and Japanese is provided.
- Supports downloaded True Type fonts
- Capture bitmap or outline fonts to an optional flash memory or optional hard disk using AFP/IPDS and PSF. This results in reduced network traffic over local area networks.
- Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
- Emulates common IBM IPDS and SCS printers.
- Automatic resolution sensing for IPDS when the Host Resolution menu item is set to Auto. Selecting Auto allows 240, 300 and 600 dpi resources to be downloaded from the host.
- Product Identifier Self Defining Field Information is returned to the host with IPDS. Device type, serial number, printer code levels and printer name are returned to the host. These may be displayed at the host to aid in printer location and maintenance.
- Print PostScript, PCL, AFP/IPDS, SCS, and other local area network printer documents from mainframe, iSeries, or AS/400 systems on one printer.
- Configure SCS/TNe and IPDS settings using a printer resident web server, a browser, and the printer's IP address.
The IPDS and SCS/TNe Card is an option that is installed in the printer application solution slot. With this card and the standard Ethernet TCP/IP port, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an IBM iSeries, AS/400, or mainframe computer.
The printer emulates an IBM mainframe, iSeries, or AS/400 host printer when used with the appropriate host software and this card. The printer emulates one TN3270E printer session and up to four TN5250E printer sessions using the LU1 SCS data stream over TCP/IP with the TN3270E and TN5250E extended Telnet protocol support in this option. This is supported directly from an iSeries, AS/400, or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with the printer through the standard Ethernet network port or with the internal print servers.
The printer can be configured to save IPDS resources when attached to a LAN through the standard Ethernet port. This will improve performance on complex IPDS print jobs with host resources such as fonts, overlays, or page segments.
The IPDS emulation supports the IPDS data and resource towers. Fonts can be downloaded, captured and saved to an optional flash memory or optional hard disk in the printer. The US Postal Service (USPS) POSTNET bar code, USPS PLANET bar code, USPS 4 slate bar code, and the euro currency symbol are supported within IPDS. The euro currency symbol is also supported in the SCS, PostScript and PCL 6 emulations.
DBCS characters in Traditional Chinese, Simplified Chinese, Korean, and Japanese can be downloaded and printed from the host. DBCS fonts may be stored in flash memory or on the hard disk using the Font Capture feature to reduce network traffic and transmission time. The separate DBCS Font Cards cannot be used with the IPDS and SCS/TNe Card.
Cable Features
(P/N 75P7029) 10 Ft. Parallel Cable
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This IEEE 1284 cable allows the user to connect one laser printer to one host machine (or external print server). The cable is 10 feet in length and provides a DB-25 pin connector for the host and a 36-pin Centronics connector for the printer.
(P/N 75P7030) 2-meter USB Cable
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
This 2 meter USB cable allows the user to connect one laser printer to one host machine (or external print server). The cable provides a USB "A" connector for the host machine and a USB "B" connector for the printer.
Internal Connection Features
There is one slot for the following internal connection features.
(P/N 39V3608) Ethernet 1000BaseTX
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This feature support Gigabit Ethernet.
(P/N 39V3623) 802.11b/g/n Wireless Print Server
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 39V3423) Parallel 1284-B Interface Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 39V3424) RS-232C Serial Interface Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
External Print Servers Features
Theses external features plug into a USB port on the printer.
(P/N 39V1524) Ethernet 10BaseT/100BaseTX (1 USB port)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 39V1525) Ethernet 1000BaseTX (4 USB ports)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N varies by country) 802.11g Wireless to USB
- Minimum required = 0, maximum allowed = 1
- Prerequisite = network model or Ethernet feature, Co-requisite =none
This external feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11g wireless standard. This standard operates at speeds of up to 54 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building contruction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.
The feature is an external adapter that connects to the standard USB port on the printer.
Furniture Features
The following furniture features are availabile.
(P/N 39V3615) 5 in. Spacer
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 39V3588) Caster Base
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
Trademarks
(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
InfoPrint is a trademark of InfoPrint Solutions Company LLC in the United States, other countries, or both.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
- IBM Corporation 2008.