Xconnect II
XConnect II
Ethernet Print Servers for Centronics-Compatible Printers
XConnect II Overview
The XConnect II is a high-performance multiprotocol print server that connects virtually any type of printer to an Ethernet and/or LocalTalk network. It provides both a parallel and a serial port, and connects directly to the parallel port of the printer to provide the highest performance and to eliminate extra cabling. The parallel port is compatible with the IEEE P1284, so it can be used with software that requires bidirectional communications, such as AppleTalk and DECprint Supervisor. The serial port can be used for either a console terminal or a serial printer. For maximum flexibility, the XConnect II includes both 10base2 and 10baseT Ethernet connectors.
The XConnect II Lite is a low-cost version of the XConnect II that offers support for two protocols and a single Ethernet connector type. Like the standard XConnect II, it features a high-performance IEEE P1284 interface, a serial port, and flash memory.
Ordering Information
The XConnect II is available in six models:- XConnect II-8S (10base2/10baseT; TCP/IP, IPX/SPX, AppleTalk, DLC/LLC, NetBEUI, http protocols)
- XConnect II- 8 (10base2/10baseT; TCP/IP, IPX/SPX, AppleTalk, LAT, http protocols; NDS support on this model is limited to NPRINTER remote printer mode)
- XConnect II-8-LN03 (10base2/10baseT with LN03 emulation; TCP/IP, IPX/SPX, AppleTalk, LAT, http protocols; NDS support on this model is limited to NPRINTER remote printer mode)
- XConnect II-8N (10base2/10baseT; TCP/IP, IPX/SPX, AppleTalk, LAT, DLC/LLC, NetBEUI, LAT, VINES IP, and http)
- XConnect IIL-2 (10base2; TCP/IP, IPX/SPX; NDS support on this model is limited to NPRINTER remote printer mode)
- XConnect IIL-T XConnect IIL-T (10baseT; TCP/IP, IPX/SPX; NDS support on this model is limited to NPRINTER remote printer mode)
XConnect II Features
The XConnect II offers more features than any other product in its class, including:- NetWare, TCP/IP, DLC/LLC NetBEUI, LAT, VINES IP and AppleTalk protocols for support on virtually any network
- 10baseT UTP and 10base2 thin Ethernet connectors
- Centronics/P1284 bidirectional parallel interface with nibble, fast strobe, and compatibility modes
- Compatible with Hewlett-Packard's JetAdmin and Web JetAdmin printer managment software (Lite models only work with versions of JetAdmin prior to 2.0)
- XAdmin Windows 95/98/NT utility for easy setup of the print server
- Remote console accessible via TELNET, DEC NCP, NetWare, WebXAdmin, or serial port
- SNMP support over IP and IPX (except Lite models)
- Very high performance DMA architecture
- Serial port for use with console terminal or serial printer
- Flash memory for easy firmware updates
- lpd-Plus feature for controlling job setup and reset
Optional DEC LN03 emulation