Digi Portserver TS RS-232 Serial To Ethernet Device Server
Digi Portserver TS RS-232 Serial To Ethernet Device Server |
Portserver TS RS-232 Serial To Ethernet Device Server
PortServer TS P MEI makes it easy to connect RS-232/422/485 serial devices to an IP network. By supporting versatile powering options like power over Ethernet and serial port power, this serial server can adapt to many applications where traditional power options are not available. Power over Ethernet (802.3af, mid- and end-span support) makes it possible to run just one Ethernet cable to the device server for both power and communications. The serial port power feature enables PortServer TS P MEI to power a device over serial using Ring Indicator (RI) or DTR pins.
Available in two- and four-port versions, PortServer TS P MEI delivers universal, high performance multiport serial-to Ethernet connectivity. It is ideal for applications requiring COM ports, serial tunneling, or where TCP/UDP Socket functionality is needed.
Power over Ethernet can be used in conjunction with a conventional power supply to provide redundant power capability to the device.
?? Supports power over Ethernet (802.3af, end-span and mid-span) or serial port power for versatile and redundant powering options
?? Patented RealPort for COM/TTY port control and management
?? Modem emulation allows the device server to appear as a modem to an attached device
?? Monitoring and diagnostic utility
?? Secure communication via SSHv2
MANAGEMENT
HTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority - remote management diagnostics and auto-discovery tool
PROTOCOLS
UDP/TCP, DHCP/RARP/ARP-Ping for IP Address assignment, PPP, Extended Telnet RFC 2217, Telnet, Reverse Telnet,Modbus to Modbus/TCP protocol conversion support
SOFTWARE
Supports Digi's Realport COM port redirector
SECURITY
SSHv2, SSH/TLS
STATUS LEDS
Link, activity, power, status
OPERATING SYSTEMS
Microsoft Windows 7, 8, 8.1, 10 and Windows Server 2012, 2016, 2019; and Linux
Note: TCP/UDP socket services are operating system independent
DIMENSIONS
(L X W X D) 13.34 cm x 8.46 cm x 2.42 cm (5.25 in x 3.33 in x 0.95 in)
WEIGHT 4.00 g (2.25 oz)
OTHER
802.3af powered Ethernet (mid- and end-span); full modem and hardware flow control, modem emulation, port buffering, RJ-45-DB-9F console adapter included for optional serial configuration
SERIAL PORTS
1 RS-232/422/485 RJ-45 (switch selectable); up to 230 kbps throughput; signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
ETHERNET
POWER REQUIREMENTS
PRODUCT SURGE PROTECTION
ENVIRONMENTAL
REGULATORY APPROVALS
2 RS-232/422/485 RJ-45 (switch selectable); up to 230 kbps throughput; signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
4 RS-232/422/485 RJ-45 (switch selectable); up to 230 kbps throughput; signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
PORTS 1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); full or half duplex
POWER INPUT
9-30 VDC
POWER SUPPLY (INCLUDED)
North America: 12 VDC/.5A max out; 120 VAC in (wall mount);
International: 12 VDC/.5A max out; 100-240 VAC in (small brick)
POWER CONSUMPTION
Typical: 4 W; Max: 6 W
(ESD) 4 kV burst (EFT) per EN61000-4-4, 2 kV surge transient per EN61000-4-5
POWERED ETHERNET
Ethernet power, IEEE 802.3af compliant, pins 4/5(+) and 7/8(-); 4 kV burst (EFT) per 1000-4-4; 2 kV surge per EN61000-4-5
SERIAL POWER INPUT
DC input connector, 9-30 VDC, 525 mA max; serial port 1, pin 1 (RI), 9-30 VDC, 525 mA max
SERIAL POWER OUTPUT
Available on all serial ports; 1 watt available power with selectable voltage level; Pin 1 (RI) 5 VDC up to 200 mA max; pin 9 (DTR) 9 VDC up to 100 mA max
OPERATING TEMPERATURE
0 C to 60 C (32 F to 140 F)
STORAGE TEMPERATURE
-40 C to 85 C (-40 F to 185 F)
RELATIVE HUMIDITY
5% to 90% (non-condensing)
ETHERNET ISOLATION
1500 VAC min per IEEE802.3/ANSI X3.263
SERIAL PORT PROTECTION (ESD)
15 kV human body model
SAFETY UL/CUL60950, IEC60950 & CB
EMISSIONS/IMMUNITY
CE, FCC Part 15 (Class A), EN55024, EN55022 Class A, AS/NZS 3548, VCCI V-3/99.05