IBM 3163 Terminal

 
 
 
 


3163

3163 IBM ASCII DISPLAY STATION


Abstract

The IBM 3163 ASCII Display Station is a stand-alone, high-quality, 12-inch, 80-column, monochrome display station used for displaying up to 1,920 characters, and for entering data into and retrieving data from a host processor. The 3163 provides an asynchronous communication interface using a 7-bit or 8-bit word length, using RS-232-C (CCITT V.24/28) interface and RS-422-A (CCITT V.11) interface. It communicates with the 128 7-bit ASCII/ISO character set or 256 8-bit ASCII/ISO character set depending on machine mode and languages outside the US. The 3163 provides the advanced editing functions and is upward compatible from the 3161 native mode. The 3163 uses the ASCII (ISO) communication protocols and provides a native mode, 3101 mode, VT-100/52 mode and TeleVideo 950 mode, which allow the 3163 to attach to a variety of host processors including Series/1 and non-IBM mini-computers. The 3163 meets both general industry and unique customer information requirements. The third digit in the model number indicates the language; see the Model Summary Matrix section for specific model numbers.

Model Abstract 3163-110

The IBM 3163 Model 110 provides EIA RS-232-C (CCITT V.24/V.28) interface and Green phosphors CRT.

Model Abstract 3163-120

The IBM 3163 Model 120 provides program-selectable interface of either EIA RS-232-C (CCITT V.24/V.28) or EIA RS-422-A (CCITT V.11) and Green phosphor CRT.

Model Abstract 3163-210

The IBM 3163 Model 210 provides EIA RS-232-C (CCITT V.24/V.28) interface and Amber-gold phosphor CRT.

Model Abstract 3163-220

The IBM 3163 Model 220 provides program-selectable interface of either EIA RS-232-C (CCITT V.24/V.28) or EIA RS-422-A (CCITT V.11) and Amber-gold phosphor CRT.

Model Abstract 3163-860

The IBM 3163 Model 860 provides American Library Association (ALA) character support by displaying each diacritic, alpha, or special character in an individual space on the display screen. Diacritics precede the alpha character they modify. The Model 860 includes the new ALA keyboard. Local printer support is provided by the IBM 4201 Proprinter or IBM 4202 Proprinter/XL. When used in conjunction with the Model 860 cartridge, the 4201 or 4202 combines all side-by-side diacritic/alpha combinations and prints them in a single space.

Model Abstract 3163-861

The IBM 3163 Model 861 provides the ability to display all diacritic/alpha combinations used in 25 languages in a single display position. Combinations in other languages are displayed side-by-side. The Model 861 includes the new ALA keyboard. Printer support is provided by the 4201 or 4202 with the same ability to combine characters.


Highlights

  • Green or amber-gold phosphor CRT
  • RS-232-C communication with speeds up to 19.2K bps (Model 110/210) (Model 11X/21X)
  • RS-232-C/RS-422-A communication with speeds up to 19.2K bps (Model 12X/22X)
  • Native mode compatible with 3161 ASCII Display Station
  • 3101 Model 23 (or Model 881) emulation (US English (12Y/22Y), UK English (12E/22E), French (12F/22F), German (12G/22G), Italian (12H/22H) and Spanish (12Q/22Q) only)
  • Concurrent support of character attributes (for normal, blink, non-display, underline, reverse and high intensity) and field attributes (for normal, blink, nondisplay, underline, reverse, high intensity, protected, numeric, modified data tag, right justify with zero or space, must fill, must enter and auto send)
  • Windowing (up/down/ left/right)
  • 7680 characters buffer
  • Split screen capability (viewports, paging, partitioning)
  • Vertical smooth scroll
  • Auto skip
  • Divider scan
  • CRT saver with programmable timer
  • Hold screen (stop scrolling temporarily)
  • Block or underlined cursor with blinking option
  • Block LRC (Longitudinal Redundancy Checking)
  • Host access to the indicator row
  • Character attributes for blink, nondisplay, underline, reverse, high intensity
  • Field attributes for normal, blink, nondisplay, underline, reverse, high intensity, protected, numeric, right justify with zero or space, must fill, must enter and auto send
  • Line attributes for double high/double wide characters
  • Re-definable keyboard layout and customer replaceable keytops
  • 12 Function (F) keys redefinable from the terminal, as well as from the host (12 keys with two shifts each)
  • Three PA (Program Access) keys
  • Host-loadable characters or patterns of up to 94
  • Bidirectional auxiliary port
  • A cartridge for National Language Support or for additional attachment capabilities

Description

The 3163 displays up to 1,920 characters, 24 rows of 80 characters each. An alphameric character is represented in an 8 x 16 contiguous box matrix. The data displayed uses the 128 characters of ASCII/ISO codes and an additional character set containing 24 line drawing graphics, 10 superscript characters and 10 subscript characters. A line drawing character is represented in a maximum 8 x 16 dot matrix to create a contiguous line. The character transmission mode provides the capability to transmit a character over a communication line upon depression of each key. The block transmission mode, selectable at setup time, allows buffered transmission mode of data. The 3163 consists of the three Workstation Elements (Video, Logic, and Keyboard) and Cartridge.

Communications

The use of ASCII (ISO) codes and the asynchronous communication interface allows the 3163 to attach to a variety of host processors. Various communication options are selectable by the customer on the setup menu such as line speed (50, 75, 110, 134.5, 150, 200, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600 and 19,200 bps), parity (None, Odd, Even, Mark, Space), interface (EIA RS-232-C (CCITT V.24/V.28), EIA RS-422-A (CCITT V.11)), word length (7, 8-bit), operation mode (echo, character, block mode), turn-around character (ETX, EOT, CR, DC3), line control (CRTS, PRTS, IPRTS), stop bit (1, 2), response delay (0, 100ms) and break signal (170, 500ms). The 3163 provides XON/XOFF Control.

Operator Factors

The 3163 has an etched screen, which minimizes glare and fingerprints. Indicators are displayed under the divider scan on the bottom (25th row) of the screen, and provide useful operator information. An audible alarm is provided to alert the operator, and its volume is adjustable by the operator. The video element can be tilted and swiveled by the pedestal to set the screen angle for the operator. The cable-connected keyboard can be moved and its slope is selectable.

Input Editing Capability

Cursor move (up, down, right, left, and home), tab (forward, backward, set and clear), erase (end of line, end of page and entire page), clear (entire page and entire buffer), insert (character and line) and delete (character and line) are provided. Tab erase, insert and delete may be manipulated by field attribute. All characters can be rendered by character or field attributes. A 12-key numeric keypad and 12 Function (F) keys are provided on the keyboard.

Data Stream in Nonemulation Mode

The 3163 models generate an ISO 646 (ANSI X3.4) data stream.

3161 Migration/Coexistence

The native mode of 3163 is a superset of 3161 ASCII Display Station, and provides a migration path for the 3161 users without any software modifications.

3101 Compatibility and Migration

The 3101 emulation mode of the 3163 US English (12Y/22Y), UK English (12E/22E), French (12F/22F), German (12G/22G), Italian (12H/22H) and Spanish (12Q/22Q) models provides an enhanced 3101 functions and a migration path for 3101 users without any software modifications. When operating in 3101 emulation mode, the 3163 will accept and generate the 3101 Model 23 and Model 881 data stream. There are some operational differences in terms of the screen management facilities. "IBM 3161/3163 ASCII Display Station Description Manual" documents these differences.

Emulation Modes in Models

3101 mode of the 3163 |EMEA>US English (12Y/22Y), UK English (12E/22E), French (12F/22F), German (12G/22G), Italian (12H/22H) and Spanish (12Q/22Q) models provides emulation of 3101 model 881 23.

Emulation Modes in Features

Additional Read Command feature (#8003) provides the 3163 US English native mode with complete read command options that 3101 has supported in block mode.


There are some operational differences such as keyboard layout and how to set up the machine.

The Models 860 and 861 are special application models. The 860/861 inout, display and print (to 4201/4202 Proprinter) all characters contained in the Extended American Library Association (ALA) character set. Mon-green video model only is available. The keyboard and cartridge are unique.

Communication Interfaces

The 3163 communicates with a variety of host processors.

When using the EIA RS-232-C (CCITT V.24/V.28) interface, the 3163 can directly attach to a host processor within 12.2m (40.0 ft) at 50 - 19,200 bps, or can communicate point-to-point to a remote host processor through an external modem.

The 3163 Models 12X/22X can communicate with the host processor, without a modem, up to 1,219m (4,000 ft.) at 50 - 19,200 bps depending on the type of cable used when using the EIA RS-422-A (CCITT V.11) interface. For RS-422-A, a shielded communication cable is recommended. A multifunction attachment cable, an accessory, is used to attach a 3163 to the host via IBM Cabling System.

Modems

5841, 5842 and PTT mandatory modems complying with CCITT Recommendation (1979) V.24, V.28, ISO Standard 2110 and either CCITT Recommendations V.21, V.22, V.22bis or V.23 may be attached. Other non-IBM modems may be attached subject to the Multiple Supplier Systems Bulletin. A modem cable is required for the attachment to a modem. As an alternative to a modem attachment, the 3163 may be directly connected to a ROLM CBX at speeds up to 19.2K bps through one of the following devices with RS-232-C (CCITT V.24/28) interface: ROLMphone Datacom Module (DCM), Data Terminal Interface (DTI), rack-mounted version of the DCM or DTI.

The types and speed of currently available modems with which the 3163 operates include:

  • On Nonswitched Facilities

    Full-duplex and half-duplex modes at transmission speeds of 50 to 300, 600, 1200/600, 1800 (half-duplex), and 2400 (full-duplex only) bps. See Facility codes D1M, D2M, M1M and M2M in 2700 pages.

  • On Switched Facilities

    Full-duplex and half-duplex modes (or Full-duplex mode only in EMEA) at transmission speeds of 50, 75, 110, 134.5, 150, 200, 300, 600 and 1200/600 bps, and at 1800 bps in half-duplex mode and at 2400 bps in full-duplex mode. See Facility codes CF1, CF1M. C1M and C2M, C1, P1 and P2, C1, C1M and C2M in 2700 pages.


For communication capabilities, product utilization and special features, see 2700 pages.

The 3163 may be attached to packet switched networks through the PAD complying with the CCITT recommendation X.28 via DCEs with CCITT X.20bis interface.

Auxiliary Port

An auxiliary interface is provided for attachment of an input or output device with EIA RS-232-C (CCITT V.24/V.28). The 4201/4202 Proprinter may be attached at the Auxiliary Port.

Cables

The customer is responsible for preparation of cables. Many IBM systems require unique cables for 3163 attachment and those systems should be referenced for detail information. A 3m (10 ft.) modem cable is provided as an IBM accessory for use in attaching the 3163 to certain devices (specifically modems). A 1.5m (5 ft.) (or 1.2m (4 ft.) in EMEA), I/O cable is provided as an IBM accessory for attaching the 4201 or 4202 Proprinter.

Printers

The 3163 has an auxiliary port that can connect an ASCII printer over an RS-232-C direct connection. A print key allows local printing of the screen, while the software commands allow remote printing from a host. For example, the 4201/4202 Proprinter may attach via its serial (RS-232-C) interface to the 3163 for direct printing of text-oriented screens (or graphics and text via host programming).

Security Facilities

A special nondisplayed input mode provides for fields of data to be program-defined so that they will accept data entered from the keyboard without displaying the data on the screen.

Warranty

Upon request from the customer, special models of the 3163 with a 90-day warranty are provided. The special model numbers correspond to the standard 3-year warranted models as follows:

3-Year Warranty    Corresponding 90-day
Model Warranty Model
--------------- -------------------- 3163-21X 3163-26X
3163-22X 3163-27X
3163-860 3163-Z60
3163-861 3163-Z61
Model Description 3163-110

The IBM 3163 Model 110 provides EIA RS-232-C (CCITT V.24/V.28) interface and Green phosphors CRT.

Model Description 3163-120

The IBM 3163 Model 120 provides program-selectable interface of either EIA RS-232-C (CCITT V.24/V.28) or EIA RS-422-A (CCITT V.11) and Green phosphor CRT.

Model Description 3163-210

The IBM 3163 Model 210 provides EIA RS-232-C (CCITT V.24/V.28) interface and Amber-gold phosphor CRT.

Model Description 3163-220

The IBM 3163 Model 220 provides program-selectable interface of either EIA RS-232-C (CCITT V.24/V.28) or EIA RS-422-A (CCITT V.11) and Amber-gold phosphor CRT.

Model Description 3163-860

The IBM 3163 Model 860 provides American Library Association (ALA) character support by displaying each diacritic, alpha, or special character in an individual space on the display screen. Diacritics precede the alpha character they modify. The Model 860 includes the new ALA keyboard. Local printer support is provided by the IBM 4201 Proprinter or IBM 4202 Proprinter/XL. When used in conjunction with the Model 860 cartridge, the 4201 or 4202 combines all side-by-side diacritic/alpha combinations and prints them in a single space.

Model 860 provides EIA RS-232-C (CCITT V.24/28) interface and Green Phosphor CRT, and its nomenclature is in US English.

Model Description 3163-861

The IBM 3163 Model 861 provides the ability to display all diacritic/alpha combinations used in 25 languages in a single display position. Combinations in other languages are displayed side-by-side. The Model 861 includes the new ALA keyboard. Printer support is provided by the 4201 or 4202 with the same ability to combine characters.

Model 861 provides EIA RS-232-C (CCITT V.24/28) interface and Green Phosphor CRT, and its nomenclature is in US English.>


Models

Model Summary Matrix

                                 Phosphor
Model Interface CRT
----- ---------------- -------------
110 EIA RS-232-C Green
120 EIA RS-232-C Green
or EIA RS-422-A
210 EIA RS-232-C Amber-gold
220 EIA RS-232-C Amber-gold
or EIA RS-422-A
860 EIA RS-232-C; Green;
ALA support Individual Space
861 EIA RS-232-C; Green;
ALA support Side-by-side

Maximum

Not available.

Customer Setup (CSU)

The 3163 is designated as a customer setup machine. Setup instructions are shipped with each machine, as the "IBM 3161/3163 ASCII Display Station Setup Instructions" (GA18-2312).

Customer Responsibilities: The customer is responsible for:

  1. Adequate site, system, cables and other vendor preparation.
  2. Receipt at customer's receiving dock, unpacking and placement of unit.
  3. Physical setup, connection of cables in customer access area, setting of setup and select options.
  4. Determination of the required number of spares.
  5. Performing Problem Analysis and Resolution using "IBM 3161/3163 ASCII Display Station Operator Reference and Problem Solving Guide".
  6. Call an IBM Service/Exchange Communication Center (S/ECC) on a toll-free number for service.

omer replace a failing element with a spare element and that the customer be advised to purchase sufficient spare 3163 units for such use. The number of spare units is dependent upon the number of 3163 units the customer has installed, the application requirements, physical locations and layout. Determination of the required number of spares is a customer responsibility. However, the minimum number of spare units recommended where one unit consists of a keyboard, a logic, and a video is shown in the following table. Recommended Minimum Number of Spare 3163s:

Number         Recommended Minimum
Installed Spare Machines
---------- -------------------
1 - 50 1
51 - 100 2
101 - 300 3
301 - 500 5
501 - 700 6
701 - 1000 7

The customer should be advised to verify units for correct operation before putting them on the shelf. Spares may be ordered as a complete machine or as an individual workstation element where spare elements do not have VPA discount. See "Accessories" for ordering individual elements.

Customer Problem Analysis and Resolution (CPAR): Functions have been designed into the 3163 to enhance the availability to the customer. This has been done through the use of Problem Analysis and Solving routines and procedures that are used by the customer. See "Customer Responsibilities".

Customer Responsibility for Damaged or Altered Elements

Determination by IBM that damage to replaced units is due to causes or conditions not covered under the terms and conditions of the Purchase or Maintenance Agreement and repair of that damage or replacement of missing, altered or non-IBM parts will be charged at IBM's then current hourly service rates and minima. Altered elements will not be eligible for the exchange or replacement services.

Customer Engineer On-Site Assistance: If the customer desires assistance in performing CPAR, the customer calls the Service/Exchange Communication Center (S/ECC). IBM will assist the customer on-site in performing CPAR procedures using the same documentation that is available to the customer. All on-site assistance is available on an hourly service basis at the applicable hourly rates and terms.

Customer-owned spare elements may be installed to replace defective elements by IBM upon customer request. Shipping of defective elements to the Repair Center or Service/Exchange Center is a customer responsibility. On-site assistance is available on an hourly service basis at the applicable hourly rates and terms.

Devices Supported

Not available.

Model Conversions

None.


Technical Description

Physical Specifications

Logic Element:

Width:  345 mm (13.6 in.)
Depth: 315 mm (12.4 in.)
Height: 70 mm (2.8 in.)
Weight: 2.2 kg (4.9 lb)

Video Element:

Width:  310 mm (12.2 in.)
Depth: 307 mm (12.1 in.)
Height: 330 mm (13.0 in.)
Weight: 8.2 kg (18.1 lb)

Keyboard Element:

Width:  492 mm (19.4 in.)
Depth: 210 mm (8.3 in.)
Height: 40 mm (1.6 in.)
Weight: 2.5 kg (5.5 lb)

Cartridge:

Width:  70 mm (2.8 in.)
Depth: 112 mm (4.4 in.)
Height: 22 mm (0.9 in.)
Weight: 0.2 kg (0.4 lb)

Electrical Characteristics:

  • Low-voltage machine: 100-127V; 0.18k VA; 50/60 Hz; 205 BTU/hr; 1-phase

Operating Environment

Operating:

  • Temperature: 10 to 40.6C
  • Relative Humidity: 8 to 80 percent
  • Wet Bulb: 26.7 degrees maximum

Nonoperating:

  • Temperature: 10 to 51.7C
  • Relative Humidity: 8 to 80 percent
  • Wet Bulb: 26.7 degrees maximum

Storage:

  • Temperature: 0.6 to 60C
  • Relative Humidity: 5 to 80 percent
  • Wet Bulb: 29.4 degrees maximum

Shipment:

  • Temperature: -20 to 60C
  • Relative Humidity: 5 to 100 percent
  • Wet Bulb: 29.4 degrees maximum

Limitations

Not available.

Hardware Requirements

Not available.

Software Requirements

System Support and Programming Support

The 3163 support is provided by the current version of the following systems and licensed programs. Contact each system for availability and details of system support.

Systems to                     3163
which 3163 Native 3101
attaches - Mode Mode
and licensed Support
program System
------------ ------- ------ -----
Series/1(*1)
with
- EDX X X
- TPS X X
- CF - X
- Store
application
environment X -
System/88
with
OS, TP X -
6150 with AIX X -
5170 with XENIX X X
9370 with
ASCII subsystem X X
controller and
VM/SP,VSE/SP
or IX/370
9370 with
telecommunications
subsystem
controller and
VM/SP or VSE/SP X X
(*3)
4361 ICA with
VM/SP or VSE/SP X X
(*3)
8100 with
DPCX,DPPX X X
(*3) (*3)
3708 S/370,30XX,
43XX,9370
with MVS/SP,
MVS/XA,VSE/SP,
VM/SP,VM/SP
HPO X X
S/36/38 with
3274 Remote
Attachment
Support X X
8100 with
DPPX/SP X X
4700 via
4701/4702 X X
7171 30XX,43XX,
9370 with
MVS/SP,MVS/XA,
VM/SP,VM/SP
HPO X X
3174 asynch S/370,30XX(*4),
emulation 43XX,9370 with
adapter MVS/SP,MVS/XA,
feature VSE/SP,VM/SP,
VM/SP HPO X X
270X,370X S/370,30XX,
372X with 43XX, 9370
NTO with MVS/SP,
MVS/XA,VSE/SP,
VM/SP,VM/SP
HPO X X
(*3) (*3)
IX/370 ASCII S/370,30XX,
Control 43XX,9370
Feature on with IX/370 - X
Series/1
YALE IUP S/370,30XX,
on Series/1 9370 with
or MVS/SP,MVS/XA,
HYAC on 4994 VSE/SP,VM/SP,
or
on Series/1 VM/SP HPO - X
7426 S/370,30XX,
43XX,8100 - X
AS/400 ASCII
Workstation
Controller X -
AS/400 ASCII
Workstation
Controller Y -
ROLMbridge System 36/38
AS/400 X -
5208 System 36/38
AS/400 X -

*1 = Series/1 with Multifunction attachment feature (#1310), with Feature-programmable 4-Line Adapter feature (#2096), or with Asynchronous Terminal 8-Line Adapter (RPQ DO2350).

*3 = CPT-TWX 33/35 (TTC2) protocol only.

*4 = The channel attachment model of the 3174 is supported by 308X and 3090 only.

System Attachment

Series/1, System/88, 9370, and Non-IBM Mini Computers attach the 3163 with RS-232-C (CCITT V.24/28) interface, or RS-422-A (CCITT V.11) interface both in 50 to 19.2K bps line speed, and via a modem with RS-232-C (CCITT V.24/28) interface in 50 to 1200 bps line speed. S/370 Processors attach the 3163, via 270X, 370X, or 3725/6 with RS-232-C (CCITT V.24/28) interface in 50 to 1200 bps line speed, via 370X/8100, 3725/8100 or 3726/8100 with RS-232-C (CCITT V.24/28) interface in 50 to 9600 bps without modem and in the modems speeds (but not exceeding 9600 bps) with modem, and via a protocol converter with RS-232-C (CCITT V/24/28) interface in 50 to 19.2K bps line speed. The S/36, S/38, and AS/400 attach to the 3163 with EIA-232 (CCITT V.24/28) interface or EIA-422-A (CCITT V.11) interface. The S/36, S/38, and AS/400 attachment via the 5208 ASCII-5250 Link Protocol Converter or ROLMbridge 5250 Link Protocol Converter provides up to a 19.2K bps line speed. The AS/400 ASCII Workstation Controller also provides the 3163 up to a 19.K bps line speed. The 3163 can be attached to the 6150/6151 via the 4-Port Asynchronous 232-C Adapter or 4-Port Asynchronous 422-A Adapter (see Note), and operate in native mode. The 3163 may be attached to a 4361 Processor via the 4361 feature "EIA/CCITT Interface (#3701" with the 4361 feature "Line Attachment Base for Non-clocked Modems" (#4696). It may operate at speeds up to 2400 bps, in 3101 mode and 3163 native mode. The attachment must be via the EIA RS-232-C (CCITT V.24/28) interface, either via asynchronous modem with switched or nonswitched telephone line, or via direct attachment at distance 50 to 12m (40 ft.). For direct connection to the 8100 system a modem cable must be used, with extension to the 8100 direct connect cable not exceeding 9.1m (30.0 ft.). The total maximum cable length from 8100 system to the 3163 may not exceed 12.2m (40.0 ft.).


Publications

  • (Except Japan) "IBM 3161/3163 ASCII Display Station Description" (GA18-2310)
  • "IBM 3161/3163 ASCII Display Station Operator Reference and Problem Solving Guide" (GA18-2311)
  • "IBM 3161/3163 ASCII Display Station Setup Instructions" (GA18-2312)
  • (Japan only) "IBM 3161/3163 ASCII Display Station Description" (GA18-2310) (Model 11Y/K, 12Y/K, 21Y/K, 22Y/K)
  • "IBM 3261/3163 ASCII Display Station Operator Reference and Problem Solving Guide" (GA18-2311) (Model 11Y, 12Y, 21Y, 22Y), (GA18-2432) (Model 11K, 12K, 21K, 22K)
  • "IBM 3161/3163 ASCII Display Station Setup Instructions" (GA18-2312), (Model 11Y, 12Y, 21Y, 22Y), (GA18-2433) (Model 11K, 12K, 21K, 22K)
  • "IBM 3161/3163 ASCII Display Station Repair Center Maintenance Information" (SY18-2118)
  • "Using the IBM 3163 ASCII Display Station to Emulate the DEC VT100/52" (GA18-2313)
  • "Using the IBM 3163 ASCII Display Station to Emulate the TeleVideo Model 950" (GA18-2314)
  • "IBM 3163 and 3164 ASCII Display Station User's Guide for Emulating IBM Terminals and DEC VT100/52 Terminals" (GA18-2720)
  • "IBM 3163/3164 ASCII Display Station User's Guide for Enhanced Emulation of TeleVideo 950" (GA18-2736)
  • "ALA User's Guide for IBM 3163/3164" (GA18-2563)
  • "How to Use the Additional Read Command Cartridge on IBM 3161/3162" (GA18-2487)

For others, see "KWIC Index" (G320-1621) or specific system bibliography.


Features -- Specify/Special/Exchange

No Charge Specify Codes

Specify feature codes, when ordered for field installation via MES, are billable to the customer unless ordered with a model change and/or a chargeable feature. (Color and voltage changes are always billable.) If the price is not in the price file, an RPQ should be submitted.

No Need to specify for the following standard features.

  • Power: 120V AC, 1-phase, 3-wire, 60 Hz in the US. 200-240V AC, 1-phase, 3-wire, 50/60 Hz in EMEA. 100-125V AC, 1-phase, 3-wire, 50/60 Hz. 200-240V AC, 1-phase, 3-wire, 50/60 Hz in Canada, IBM LA and AP.
  • Power Cord: 2.8m (9 ft) power cord is provided for all models.

Note:If 1.8m (6 ft.) power cord is required, order it by P/N 6952298.

Special Feature Codes -- Chargeable

Optional Features:

  • Additional Read Command (#8003) (GA18-2487)
  • VT 100/52 Emulation (#8103) (GA18-2313)
  • TeleVideo 950 Emulation (#8953) (GA18-2314)
  • IBM 3163 and 3164 Emulating (#8313) (GA18-2720)
  • IBM Terminals and DEC
  • VT/100/52 Terminals
  • IBM 3163/3164 Enhanced Emulation of TeleVideo 950 (#8954) (GA18-2736)
Field Installation: All special features are field installable.

Customer Setup: All special features are designed for customer setup.

Feature Exchanges

Not available.


Accessories

The following accessories may be ordered:

Customers may order accessories through IBM Direct 1-800-IBM-2468.

Description                   P/N
-------------------------- -------
25-pin gender change
connector 81X5516
Blank keycaps - light (60
caps) and a keycap removal
tool 1351710
Blank keycaps - dark (60 caps)1351728
and a keycap removal tool
Clear lens cap - with paper 6341707
inserts (60 light and 60 dark)
and a keycap removal tool
Keycap removal tool (6 tools) 1351717
Paper Inserts for clear lens 6341704
keycaps (150 light and 150
dark) and keycap removal tool(Except Japan)
Modem Cable - inch screws 6343332
I/O Cable 6343373
Multifunction attachment
cable 8310553
(Japan only)
Modem Cable - metric screws 6343333
I/O Cable 6343373
Multifunction attachment
cable 83105531.8M (6 ft.) power cord 6952298

For connection to 5841 modem or PTT modem the above IBM cable or equivalent must be used.

Customer Replacement Parts

The following parts are not covered by the IBM maintenance agreement and must be purchased by the customer when a replacement is needed.

Description                   P/N
----------------------- -------
Field Packing Material:
Video 6339511
Logic 6165946
Keyboard 7342889

Machine Elements

Machine Elements may be ordered to provide individual elements as needed by the customer in the use of the 3163.

Order Entry

For shipment, specify Machine Element Number (P/N) at the time of order entry.

  1. Marketing representative should complete AAS Order Guide.
  2. Account Administrator should order via AAS MSORDER Transaction.
  3. FE Distribution Center will ship to Customer.
To Fit    Machine
Model Element P/N
------ ------- -------
110,120,
860,861 Video (green) 83X7939
210,220 Video (amber-gold) 83X7944
110,210,
860,861 Logic 6113002
120,220 Logic 6113003
All Keyboard-English US 1386304
860,861 Keyboard-ALA 1390680
110,120, Cartridge -
210,220 VT100/52 Emulation 6113006
110,120, Cartridge - TeleVideo
210,220 950 Emulation 6113021
110,120,
210,220 Cartridge-Additional
Read Command 6456333
110,120,
210,220 Cartridge-Enhanced
Emulation of VT100
and System Attachment
(#8313) 65X3393
110,120,
210,220 Cartridge-Enhanced
Emulation of TeleVideo
950 Emulation
(#8954) 65X3344
860 Cartridge-ALA 6051947
861 Cartridge-ALA.ML 65X3303
All Stand (tilt/swivel) 6319013
All Power Cord 2.8m
(9 ft) 6952297
All Power Cord 1.8m
(6 ft.) 6952298
All Video Cable
(NO LONGER AVAILABLE/Required)

Maintenance: Maintenance for individual workstation element is available at IBM Repair Centers or through an IBM Service/Exchange Center at the applicable IBM Hourly Service rates and minimum charges.


Supplies

None.

Diskettes

Not available.

Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

File Last Updated on 3/03/97