• 1-888-742-9565
  • 248-324-1800

Attention Dealers and Repeat customers:

Discounts may be available based on your log-in. Call or Email for information.

We hold a huge inventory and are in a position to present a fair market price. Other dealers compete against this, so:

We will meet or beat ANY bona fide offer.

Want to use your own freight account for shipping? Please call so we can set it up for you.

Zebra 105Se Printer

 
 
 



Zebra Z105 SE Thermal Label Printer
Fully refurbished with 1-year warranty
Z105SE
$937.00










Zebra 105Se
  • Thin film printhead with Energy Control
  • Thermal transfer or direct thermal printing:
      • standard 203 dots/inch (8 dots/mm);
      • optional 152 dots/inch (6 dots/mm) or 300 dots/inch (12 dots/mm) resolution
  • Maximum print width: 4.09"(104mm)
Media Dimensions
  • Minimum label width: 0.79" (20mm)
  • Maximum label width: 4.52" (115mm)
  • Minimum label length: 0.5" (12mm) in rewind and peel modes, 0.63" (16mm) in tear- off mode, and 1.5" (38mm) in cutter mode
  • Maximum print length:
    16.0" (406mm) 300dpi
    (w/std. mem.) 12.0" (304mm) 203dpi
    (w/std. mem.) 22.0" (558mm) 152dpi
  • Total thickness (label and liner): 0.003" (0.076mm) to 0.012" (0.304mm)
  • Maximum label roll diameter(OD): 8.0" (203mm)
  • Media core inside diameter: 3.0" (76mm)
  • Standard transmissive media sensing (label gap/notch)
Memory
  • 1 MB DRAM
Ribbons
  • Maximum outside diameter: 3.2" (81mm)
  • Ribbon core inside diameter: 1.0" (25.4mm)
  • Width range: 0.79" (20mm) to 5.31" (134.8mm)
Print Speeds
  • Programmable constant printing speeds of 2" (51mm), 3" (76mm), 4" (102mm), 5" (127mm) and 6" (152mm) per second
  • Speeds with optional 300dpi printhead are 2.4" (61mm), 3" (76mm) and 4" (102mm) per second
Printer Programming Options
  • ZPL II or ZPL (selectable through software)
  • Zebra printer driver for Windows operating system
  • BAR-ONE Windows-based WYSIWYG on-screen label design application software
  • PC-470 print controller with keyboard and display for stand-alone applications
Fonts
  • 7 bitmapped, 1 scalable (CG Triumvirate Bold Condensed)
  • IBM Code Page 850 International Characters
  • Optional fonts: available on EPROM as scalable or smooth bit-mapped fonts in standard, bold, italic and bold italic
  • Futura, CG Triumvirate Condensed, CG Palacio, CG Times or Univers character sets
Bar Code Symbologies
Code 11UPC-A, UPC-EIndustrial 2 of 5
Code 39EAN-8, EAN-13LOGMARS
Code 93PlesseyPostnet
Code 128 with subsets A/B/C and UCC Case CodesInterleaved 2 of 5EAN and UPC with 2 or 5 digit supplements
CodabarStandard 2 of 5MSI
ISBT 128




2-D Symbologies

CODABLOCK PDF417Code 49
Maxi CodeDatamatrixQR Code
Electronics
  • 32-bit microprocessor
Electrical
  • Switch selectable 115 VAC +15/-20%,
  • 5 amp fused; 230 VAC +/-15%, 3 amp fused (48-62Hz)
Communications Interface
  • Centronics parallel or RS-232C serial ports, 110-19.2kB configurable BAUD rate, parity, data bits, XON-OFF/DTR protocol
Physical
  • Height: 15.4" (391mm)
  • Width: 10.5" (267mm)
  • Depth: 18.9" (480mm)
  • Weight without options: 43 lbs (19.5kg)
Environment
  • Operating temperature: 41?F (5C) to 104F (40C)
  • Operating humidity 20-85% non-condensing
  • Storage/transportation: -40F (-40C) to 158F (70C), 20% to 85% non-condensing R.H.
Options
  • Label peel and liner rewind (for print-and-apply)
  • Rewind (full label roll is rewound internally)
  • High-performance cutter cuts full-width media, under software control (not compatible with rewind and peel options)
  • Printhead 152.4 dots-per-inch (6 dots/mm) resolution
  • Printhead 300 dots-per-inch (12 dots/mm) resolution
  • Internal Fan-fold Media Supply Bin (not compatible with internal rewind or peel options)
  • Additional scalable and smooth bit-mapped fonts
  • Reflective (black mark) media sensor (in addition to standard transmissive sensor), switch selectable
    BAR-ONE label design software