T6600 Series Parts

 
 
 


Please call for parts assistance

1 177505-901 Top Cover Assembly, Stealth Black Includes items 2 and 3

179781-901 Top Cover Assembly, Lt Gray Includes items 2 and 3

2 131803-904 Window, Cabinet

3 175680-001 Wireform Paper Path, Standard

4 177541-901 Rear Door Assembly, Stealth Black

179785-901 Rear Door Assembly, Lt Gray

177489-901 Extended Door Assy, Stealth Black For use with power stacker

179792-901 Extended Door Assy, Lt Gray For use with power stacker. For printers without power stacker; includes items 9, 10, 11, 12, and 13
5 177502-901 Front Door Assembly, Stealth Black 179779-901 Front Door Assembly, Lt Gray Includes items 9, 10, 11, 12, and 13
6 141278-901 Caster, with Brake Two at front

7 141278-902 Caster, without Brake Two at rear

9 101607-003 Wire Rope, Front and Rear One on each door (rear not shown)

10 131829-001 Door Hinge, Top

11 112367-001 Door Hinge, Bottom

12 157332-901 Door Seal Kit

13 156030-001 Top Cover Seal Kit
1 158179-901 Passive Stacker Assembly Not used on printers with the power stacker; includes items 6, 7, and 8

2 153503-001 Grommet Kit, Cabinet

3 153778-001 Chain Assembly Kit

4 Ref AC Power Cord

5 Ref Grommet, Power Cord (2) Included in item 2

6 151910-001 Guide Rail, Stacker Part of item 1

7 151831-001 Clip, Rail, Stacker

8 Ref Screw (4)

9 178913-001 Field Kit, Tray, Cab, Rear, Black Includes items 1, 6, 7, 8, 9, 10, and paper tent
179799-001 Tray, Power Stacker, Pull-Out, Gray 173864-001

10 174392-901 Slide Set, Ball Bearing

11 250085-001 Field Kit, Front Access Stacker, Cab Optional on all cabinet models
1 254284-901 Control Panel Assembly, Cabinet

2 152440-901 Cable Assembly, Control Panel

3 107961-905 Dashpot Kit Includes ball studs, spring clips, and mounting hardware

4 Ref Screw, w/Lock Washer (3) 6-32x.375

5 Ref Screw, w/Lock Washer (3) 6-32x2.00

6 150261-901 Fan Assembly Includes mounting hardware

7 Ref Duct, Air Exhaust

8 177296-001 Paper Entrance Guide, V2 6620 only

9 173428-001 Spring, Paper Entrance Guide (2) 6620 only

10 173351-001 Bracket, Paper Entrance Guide, Right 6620 only

173352-001 Bracket, Paper Entrance Guide, Left 6620 only

11 Ref Control Panel Bracket

12 Ref Screw, Hex w/Lock Washer (2) 6-32x.375
1 254284-902 Control Panel Assembly, Ped

2 Ref Screw, Captive (2)

3 179163-001 Field Kit, Lid Assembly, Ped, Blk

179845-001Field Kit, Lid Assembly, Ped, Gray

Both kits also contain items 8, 14, and 17
4 Ref Screw (2)

5 152440-901 Cable Assembly, Control Panel

6 179081-001 Packaged Ped Kit, Stealth Black

179776-001 Packaged Ped Kit, Lt Gray

7 179162-001 Field Kit, Caster Kit, Ped

8 178692-901 Window, Top Cover

9 179193-901 Top Cover, Ped, Base Assy, Stealth Black

10 Ref Screw (4) 10-32x.625

11 110718-001 Paper Tray

12 157070-901 Paper Fence, Rear, Ped

13 250083-001 Field Kit, Acoustic Shroud, Ped, 6600 CRP Optional on all pedestal models

14 178259-901 Panel, Lid, Quick Access, Black

179765-901 Panel, Lid, Quick Access, Gray

15 178241-901 Panel, Quick Access, Flip Up, Black

179766-901 Panel, Quick Access, Flip Up, Gray

16 156033-901 Paper Tray, Front, Ped

17 179193-901 Top Cover, Ped, Base Assy, Stealth Black

179770-901 Top Cover, Ped, Base Assy, Lt Gray

18 253272-001 Spares Kit, Hinges,LT/RT, 6600 CRP Pedestal
1 179128-901 Shuttle Cover Assembly or Shroud Assembly Air Shroud Assembly

2 Ref Screw, Captive (2) 10-24x.62 with O-ring, .125x.250x.06

3 Ref Screw, Thread-forming (2) 6-32x.25 and #6 flat washer

4 Ref Barrier Shield

5 175188-901 Paper Path, V3

6 Ref Screw, w/Lock Washer (3) 6-32.25 and #6 flat washer

7 153488-001 Field Kit, Covers Paper Feed Belt Cover shown

8 108664-903 Belt, Timing, .080 Pitch, 100 Teeth, .500 Wide Paper Feed Belt

9 Ref Screw, Thread-forming (2) 6-32x.25

10 179276-001 Power Supply Insulator Taped to the upper edge of the card cage

11 153528-901 Paper Scale

12 152284-901 Anti-static Brush Kit Mounts to top of item 4

13 254476-001 PCBA, Ribbon Weld Processor, V1

14 103677-001 Screw, 4-20X1/4, PHCRI, STL/ZNB, Plastite 48-2
1 179128-901 Shuttle Cover Assembly or Shroud Assembly Shuttle Cover (including paper scale) Air Shroud Assembly

254991-901 Air Shroud Assembly (including paper scale)

2 Ref Screw, Captive (2) 10-24x.62 with O-ring, .125x.250x.06

3 Ref Screw, Thread-forming (2) 6-32x.25 and #6 flat washer

4 Ref Barrier Shield

5 179276-001 Power Supply Insulator Taped to card cage along upper edge

6 108664-903 Belt, Timing, .080 Pitch, 100 Teeth, .500 Wide Paper Feed Belt

7 153488-001 Field Kit, Covers Paper Feed Belt Cover shown

8 254478-901 Paper Scale

9 254476-001 PCBA, Ribbon Weld Processor, V1

10 103677-001 Screw, 4-20X1/4, PHCRI, STL/ZNB, Plastite 48-2
1 Ref Nut, 6-32 (1) Upper right fan corner only

2 150261-901 Card Cage Fan Assembly Air flow is into card cage

3 Ref Fan Guard

4 Ref Screw, w/Lock Washer (4) 6-32x1.75

5 Ref Card Cage, Pedestal

6 142013-901 Circuit Breaker

7 Ref Baffle, Power Supply, Ped, 6600 CRP
1 254350-901 HB Cover Assy 6605c, 6602CH

254353-901 HB Cover Assy 6610c, 6603CH

254356-901 HB Cover Assy 6615c, 6606CH

254138-901 Cover Assy 6620c, 6608CH

2 254504-901 Shuttle Assembly, 05 6605c

254504-991 Shuttle Assembly, 05, Adv Exch 6605c

254496-901 Shuttle Assembly, 10 6610c

254496-991 Shuttle Assembly, 10, Adv Exch 6610c

254488-901 Shuttle Assembly, 15 6615c

254488-991 Shuttle Assembly, 15, Adv Exch 6615c

254135-901 Shuttle Assembly, 20 6220c

254135-901 Shuttle Assembly, 20, Adv Exch 6220c

254505-001 Shuttle Assembly, 6602Hc

254505-991 Shuttle Assembly, Adv Exch 6602Hc

254497-901 Shuttle Assembly 6603Hc

254497-991 Shuttle Assembly, Adv Exch 66X03Hc

254489-901 Shuttle Assembly, 6606Hc

254489-991 Shuttle Assembly, Adv Exch 6606Hc

254506-901 Shuttle Assembly, 08HC 6608Hc

254506-991 Shuttle Assembly, Adv Exch 6608Hc

252700-901 Hammer Spring Assembly, 05, Thin 6605

252715-901 Hammer Spring Assembly, 10, Thin 6610

252723-901 Hammer Spring Assembly, 15, Thin 6615

174514-901 Hammer Spring Assembly, 20S 6620

252743-901 Hammer Spring Assembly, 02H 6602H

252719-901 Hammer Spring Assembly, 03H 6603H

252719-901 Hammer Spring Assembly, 06H 6606H

175613-901 Hammer Spring Assembly, 06H, Version 2 6606H

252739-901 Hammer Spring Assembly, 08H, Thin 6608H

252739-901 Hammer Spring Assembly, HD, Thin P7000HD

3 250297-901 Power Supply, PFC, 5/10 6605, -10,- 02H, -03H

250297-991 Power Supply, PFC, 5/10, Adv Exch 6605, -10,- 02H, -03H

250251-901 Power Supply, PFC, 15 6615, 6606H

250251-991 Power Supply, PFC, 15, Adv Exch 6615, 6606H

250410-901 Power Supply, PFC, 20 6620, 6608H, P7HD

250410-991 Power Supply, PFC, 20, Adv Exch 6620, 6608H, P7HD

4 Ref P101 Cable Connector Part of item 3 Controller PCBA, V6, Adv Exch 10 164805-901

5 Ref Cable Assembly, AC-In, Power Supply Part of Field Kit, AC Assy, 153502-901

6 253081-901 Controller PCBA, V6. V6 Controller Board has integrated ethernet port.

253081-991 Controller PCBA, V6. V6 Controller Board has integrated ethernet port. Adv Ex

7 202362-001 Housing, Connector Kit P106, Motor Sensor, Left

8 152421-901 Hammer Bank Logic Cable Assembly Long, 20

9 152420-901 Shuttle Motor Cable Assembly

10 164805-901 Hammer Bank Power Cable Assy Use on all except 6620

173215-901 Hammer Bank Dual Power Cable Assy, 6620 only

11 202362-001 Housing, Connector Kit P107, Motor Sensor, Right

11 202362-001 Housing, Connector Kit P107, Motor Sensor, Right

12 152439-901 Centronics I/O Cable Assembly

13 152440-901 Control Panel Cable Assembly

14 150399-901 Clamp, Shaft, Receiving

15 Ref Screw, Captive, Power Supply (2)

16 250488-902 SIMM, Flash Memory, 8 MB Install in J10 on V6 board

250488-903 SIMM, Flash Memory, 16 MB

18 177482-001 Paper Feed Motor Assembly with Pulley, (20) 6620

178046-001 Paper Feed Motor 6605/10/15

178535-001 Paper Feed Motor 6605/10/15LG

19 179526-901 PCBA, Cartridge Interface Board, w/ harness.

20 73164-901 Cable Assembly, PS I/O, 2000 Used only in 6620.

21 250489-901 SDRAM DIMM, MEM, 32 MB, PC100 (V5 controller board only) SDRAM is permanently soldered to the V6 controller board



1 150281-901 Magnetic Pickup (MPU) Assembly

2 Ref Bracket, MPU Part of item 1

3 Ref Screw, Socket Cap 6-32x.38

4 153537-901 Spring, Hammer Bank

5 Ref MPU Cable Connector (P03)

6 176507-001 Anti-Rotation Spring Constraint 6620 only

7 152425-901 Magnetic Pickup (MPU) Cable Assembly
1 Ref Screw, Socket Cap, 6-32x.312 Trilob (Self-Tapping) (2)

2 173130-001 Plate, Tractor Shaft, Left

3 151944-001 Bearing, Ball, Sealed

4 178990-901 Paper Support (2)

5 204155-001 Tolerance Ring,.37X.25,.006 THK,SS

6 178988-901 Splined Shaft Assembly (Blue Handle)

7 Ref Screw, Socket Cap, 6-32x.312 Trilob (Self-Tapping)

8 173217-001 Plate, Tractor Shaft, Right

9 173137-001 Support Shaft

10a 179061-901 Tractor Set, 20 (Blue) 6620

10b 179065-901 Tractor Set, Non-Roller, 05/10/15 (Blue) Installed at the factory on models with power stacker; comes standard on 6620

11 Ref Right Side Plate

12 Ref Left Side Plate

1 Ref Set screw (2) Part of item 25

2 Ref Bracket, Platen (2) Part of item 25

3 150957-901 Ironer Assembly, Reverse Paper Feed All except ZTP printers

4 Ref Screw, Thread-forming (3) 6-32x.25

5 174968-001 Ironer Bracket/Plate Field Kit

6 Ref Plate, Ironer Part of item 5

7 253246-901 Platen Assembly, V2

8 Ref Washer, Flat (2) Part of item 25

9 Ref Screw (2) Part of item 11

10 Ref Washer, Flat #4 (2) Part of item 11

11 179334-901 Field Kit, Switch Assy, w/Bracket Includes items 9, 10, 19

12 Ref Screw, Socket Cap, 6-32x.75 Part of item 15

13 Ref Washer Part of item 15

14 Ref Nut Part of item 15

15 178705-901 Platen Stop Assembly Includes items 12, 13, 14

16 Ref Spring, Extension 1.12L Part of item 25

17 Ref Link, Spring Part of item 25

18 Ref Bearing, Nylon .376 Part of item 25

19 Ref Bracket, Switch Mount Part of item 11

20 Ref Wear Saddle, Platen (2) Part of item 25

21 155071-902 Platen Pulley, Drive

22 Ref Screw, Socket Cap, 6-32x.44 Part of item 21

23 141516-901 Belt, Timing, .080 Pitch, .312 Wide Platen Open Belt

24 153488-001 Field Kit, Covers Platen Open Belt Cover shown

25 177558-001 Platen Hardware Kit Includes items 1, 2, 8, 16, 17, 18, 20, 26, 30

26 Ref Platen Washer Part of item 25

27 176630-901 Paper Ironer, Auxiliary On 6600HD, 6606H, 6608H, 6615, and 6620 models install item 27 in front of item 3 (i.e., on the shuttle side). All other models do not use this item. Do NOT install this item on ZTP

28 173941-001 Bushing Part of item 25.
1 150261-901 Card Cage Fan Assembly Air flow is into card cage

2 Ref Screw, w/Lock Washer (3) Two 6-32x1.75 on bottom, One 6-32x0.50 on top left

3 152415-901 Switch Assembly, Paper Detector

170172-001 Field Kit, Black Back Form Switch Optional switch used with black back forms

4 Ref Screw, Thread-forming, 6-32x.375 (2) Part of item 3

5 179638-001 Motor Assembly, Platen Includes pulley

6 Ref Screw, Hex w/Lock Washer, 10-24x.50 (2) Part of item 18

7 Undefined

8 Undefined

9 Undefined

10 Ref Screw, w/Lock Washer, 10-32x.50 (2) Part of item 5

11 Ref Shield, Card Cage Fan

12 254507-901 Motor, Stepper, P7c Ribbon Cartridge

16 Ref Screw, w/Lock Washer (2) 6-32x1.25

17 152416-901 Hammer Bank Fan Assembly All except 6620; air flow is up

173427-901 Hammer Bank Fan Assembly 6620; air flow is up

18a 178046-001 Field Kit, Paper Feed Motor, V3

18b 177482-001 Field KIt, Paper Feed Motor w/Heat Sink All except 6620
6620—Heat sink screws: 18 inch-pounds (2.03 N•m)

19 Ref Screw, Hex w/Lock Washer (2) 10-32x.50

20 Ref Post, Platen Belt Spring

21 Ref Spring, Platen Belt

22 203281-001 Screw, M3x6x.5

23 254460-001 Bracket, Mtg, Motor

24 205477-001 Screw, 6-32 x .25, M3

25 254161-001 PCBA, Cartridge Interface Board, LF
1 142013-901 Circuit Breaker

2 Ref IEC 320 AC Power Connector Connector J301 Part of Field Kit, AC Assy 153502-001

3 Ref Chassis Ground Stud Part of Field Kit, AC Assy 153502-001

4 Ref Connector P1 To power supply board connector J1 AC Part of Field Kit, AC Assy 153502-001

5 Ref Cable Assembly, AC-In, Power Supply Part of Field Kit, AC Assy 153502-001

6 153502-001 Field Kit, AC Assy
1 179913-901 Spare PCBA, PCI-CT, V3, LF

179913-991 Spare PCBA, PCI-CT, V3, Adv Exch

2 176257-001 Plate, PCI Cover

3 Ref Card Cage

4 Ref Screw

5 Ref V5 Controller Board
1 140752-002 Twinax Auto-Termination Cable (“Smart-T”)

2 204806-901 Cable, Extension, Smart-T Required in printers with the power stacker so the twinax auto-termination cable will clear the stacker elevator. (See also page 415.)

3 Ref PCI-CT Twinax Connector

4 Ref PCI-CT Coax Connector
1 250678-901 Spare PCBA, PCI-Network

250678-991 Spare PCBA, PCI-Network, Adv Exch

250675-901 Spare PCBA, PCI Wireless

On the V6 controller board the NIC is part of the board.

2 176257-001 Cover Plate, PCI

3 Ref Rear of Card Cage

4 Ref Screw

5 Ref V6 Controller Board Ethernet hard wired on V6 controller board.

6 Ref Ethernet Port Ethernet hard wired on V6 Controller Board. To replace port, you must replace the entire V6 controller board.
Be sure to transfer the security key. The new board has a new MAC address which is found on the configuration printout.
1 179134-901 PCBA, RS422 ADAPTER, DB9/DB25 Part of Field Kit 176425-001

2 102922-001 Screwlock Kit, Female (2)

3 176075-901 Cable Assembly, RS-422, I/O Part of Field Kit 176425-001

4 Ref RS-422 Connector, 9-Pin Part of item 3

5 Ref Connector J15 Note that there is no Pin 10. If Pin 10 is present, remove it.

6 Ref Controller Board

7 Ref Connector J201, RS-232, 9-Pin

8 Ref Cover Plate

9 Ref Nut (2) Part of item 2

10 Ref Lock Washer (2) Part of item 2

11 Ref Flat Washer (4) Part of item 2
1 179228-001 Field Kit, Antenna, Fixed Point, Dipole

2 204479-001 Cable, MMCX-BNC, 10 inch, S24