Real inventory that we refurbish and stand behind, since 1985.

Attention Dealers and Repeat customers:

Discounts may be available based on your log-in. Call or Email for information.

We hold a huge inventory and are in a position to present a fair market price. Other dealers compete against this, so:

Call the REAL source!

Want to use your own freight account for shipping? Please call so we can set it up for you.

IBM Infoprint 1357ex (2708-M03)

 
 
 
 


InfoPrint Pro 907, 1107, 1357, 907EX, 1107EX, 1357EX

Type Model
2708-M01 http://www.argecy.com/images/ippro907ex.jpg
2708-M02 http://www.argecy.com/images/ippro1107EX.jpg
2708-M03 http://www.argecy.com/images/ippro1357EX.jpg
2708-P01 http://www.argecy.com/images/ippro907.jpg
2708-P02 http://www.argecy.com/images/ippro1107.jpg
2708-P03 http://www.argecy.com/images/ippro1357.jpg

Abstract

The Ricoh-IBM 2708 InfoPrint cutsheet products provide up to 8,050 sheets input capacity and 10,000 sheets output capacity.

Model Abstract 2708-P01

The 2708 InfoPrint Pro 907 Printer Model P01 has a print speed up to 90 impressions-per-minute (ipm) and a duty cycle up to 1.2 million images per month.

Model Abstract 2708-P02

The 2708 InfoPrint Pro 1107 Printer Model P02 has a print speed up to 110 impressions-per-minute (ipm) and a duty cycle up to 1.5 million images per month.

Model Abstract 2708-P03

The 2708 InfoPrint Pro 1357 Printer Model P03 has a print speed up to 135 impressions-per-minute (ipm) and a duty cycle up to 1.9 million images per month.

Model Abstract 2708-M01

The 2708 InfoPrint Pro 907EX MFP Printer Model M01 has a print speed up to 90 impressions-per-minute (ipm) and a duty cycle up to 1.2 million images per month.

Model Abstract 2708-M02

The 2708 InfoPrint Pro 1107EX MFP Printer Model M02 has a print speed up to 110 impressions-per-minute (ipm) and a duty cycle up to 1.5 million images per month.

Model Abstract 2708-M03

The 2708 InfoPrint Pro 1357EX MFP Printer Model M03 has a print speed up up 135 impressions-per-minute (ipm) and a duty cycle up to 1.9 million images per month.

Highlights

InfoPrint Pro 907, InfoPrint Pro 1107, InfoPrint Pro 1357

Technology-optimized cutsheet production printers that can increase productivity, extend job capabilities, and improve versatility.

  • Includes a powerful controller that can support native InfoPrint IPDS as well as PostScript 3, PCL5e/6, and direct print PDF.
  • Expands finishing choices with in-line punching, binding and tandem high capacity stacking solutions.
  • Maximizes throughput with the ability to load and unload media and add toner while the printer is running and protect sensitive stocks, like preprinted checks, with user-supplied lock and key security.
  • Supports complex applications with mixed-plex and mixed-media requirements.
  • Optimizes high capacity stacking and provides heavy media support with an integrated and adjustable decurler.
  • Saves time with trained customer replacement units (TCRUs), which can maximize uptime.

InfoPrint Pro 907EX, InfoPrint Pro 1107EX, InfoPrint Pro 1357EX

Grow print on demand and transaction production with a family of versatile high-speed, high-quality printers.

  • Offers print speeds up to 90, 110, or 135 ipm.
  • Boosts productivity with a duty cycle up to 1.9 million images per month.
  • Provides robust media support, including labels, coated and prepunched stocks, up to 13 x 19.2 in. and SRA(3) for creating complex documents like books and manuals.
  • Delivers multifunction capabilities: up to 1,200 x 1,200 dpi copying, printing, and scanning.
  • Enables long uninterrupted runs with high-capacity input and output.
  • Enhances processing performance with a powerful EFI Fiery Print EB-1357 external server option.
  • Offers multiple in-line finishing choices and high capacity stacking options.
  • Eases integration with multiple datastream support: PS/PDF, PCL, and native InfoPrint IPDS.

Description

The InfoPrint Solutions Company, a Ricoh-IBM joint venture, offers the following cutsheet products:

  • InfoPrint Pro 907 printer
    • Print speed up to 90 impressions-per-minute (ipm)(1)
    • Duty cycle up to 1.2 million images per month(2)
  • InfoPrint Pro 1107 printer
    • Print speed up to 110 ipm(1)
    • Duty cycle up to 1.5 million images per month(2)
  • InfoPrint Pro 1357 printer
    • Print speed up to 135 ipm(1)
    • Duty cycle up to 1.9 million images per month(2)

All InfoPrint Pro 907, 1107, and 1357 printers offer the following:

  • Up to 8,050 sheets input capacity and 10,000 sheets output capacity to enable long runs
  • In-line high capacity stack, punch, staple, fold, and saddle stitch finishing
  • Support for native InfoPrint IPDS as well as PostScript 3, PCL5e/6, and direct print PDF with a powerful controller
  • Decurl unit optimizes sheet flatness and stacking
  • Maximized throughput with the ability to load and unload media and add toner while the printer is running
  • InfoPrint Pro 907EX MFP
    • Print speed up to 90 impressions-per-minute (ipm)(1)
    • Duty cycle up to 1.2 million images per month(2)
  • InfoPrint Pro 1107EX MFP
    • Print speed up to 110 ipm(1)
    • Duty cycle up to 1.5 million images per month(2)
  • InfoPrint Pro 1357EX MFP
    • Print speed up to 135 ipm(1)
    • Duty cycle up to 1.9 million images per month(2)

All InfoPrint Pro 907EX, 1107EX, and 1357EX printers offer the following:

  • Up to 8,050 sheets input capacity and 10,000 sheets output capacity to enable long runs
  • In-line high capacity stack, punch, staple, fold and saddle stitch finishing
  • Up to 1,200 x 1,200 dpi copying, printing, and 600 x 600 dpi for scanning
  • Enhanced processing performance with a powerful EFI Fiery Print EB-1357 external server option
  • Maximized uptime by allowing toner and paper loading and output unloading while printer is running
  • Easy-to-use 10.4 in. (264 mm) color touchscreen
  • Versatile editing functions pre-and post-RIP
  • Better control of paper curl with optional decurl unit
  • Increased job production with up to 13 x 19.2 in. and SRA3 media support

Note: (1) Exact speed varies depending on document complexity, system configuration, software application, driver and printer state.

Note: (2) InfoPrint Solutions Company does not recommend printing this monthly maximum on a consistent basis.

Optional Training Services

InfoPrint Solutions Company recommends expert-level training services for your cutsheet product to help ensure a seamless transition of the feature-rich print system into your environment. These face-to-face service offerings take advantage of the extensive skill and experience of our worldwide Technical Specialists to educate print operators on the features and functions of the InfoPrint Pro 907, 1107, 1357, 907EX, 1107EX, and 1357EX.

InfoPrint Pro 907, InfoPrint Pro 1107, and InfoPrint Pro 1357

Basic configuration:

  • Plotting engine
  • DC Controller
    • 1.7 GHz Freescale MC7448 Processor
    • 1 GB memory
    • 160 GB hard disk
  • First tray: 1,000 sheets x 2 (Tandem tray)
  • Second and third tray: 500 sheets tray X 2
  • 10.4-inch LCD operation panel

Models

Model Summary Matrix

Model Description Print Speed Duty Cycle
P01 InfoPrint Pro 907 up to 90 impressions per minute up to 1.2 million images per month
P02 InfoPrint Pro 1107 up to 110 impressions per minute up to 1.5 million images per month
P03 InfoPrint Pro 1357 up to 135 impressions per minute up to 1.9 million images per month
M01 InfoPrint Pro 907EX MFP up to 90 impressions per minute up to 1.2 million images per month
M02 InfoPrint Pro 1107EX MFP up to 110 impressions per minute up to 1.5 million images per month
M03 InfoPrint Pro 1357EX MFP up to 135 impressions per minute up to 1.9 million images per month

Customer Setup (CSU)

Not available.

Technical Description

Physical Specifications

See Supplementary Letter Usage - Maintenance service offering.

InfoPrint Solutions Company will provide the following additional services from the date of installation at the customer's location with a signed maintenance contract.

  • Provide toner
  • Perform preventative maintenance, which includes the replacement of consumable parts to help ensure printer performance, visual inspection, cleaning, and adjustment of the printer at InfoPrint Solutions Company's recommended service intervals.

The customer must provide an accurate meter reading from the date of installation and each month thereafter, for billing purposes.

For additional details on the Usage - Maintenance Service Offering contact your InfoPrint Solutions Company representative.

The usage charge is per impression and includes toner. An A4 or Letter-size impression, or any paper size up to A3 (11 x 17 in. double-letter size) is counted as one usage charge.

Any size equal to or greater than A3 is counted as two usage charges.

Many printer manufacturers offer a single click for all media sizes, but at a premium price.

A duplex sheet contains two impressions - one impression on each side of the sheet.

Operating Environment

Power requirements - All Models

  • NA 208 - 240 Volts, 20 Amps, 50/60 Hz
  • EU 220 - 240 Volts, 16 Amps, 50/60 Hz

Maximum power consumption - All Models

  • Models P01, P02, M01, M02: 3,500 W
  • Models P03, M03: 4,000 W

Acoustics

InfoPrint Pro 907, 1107, 1357:

 Printer Full System
---------- -----------
InfoPrint Pro 907
Standby 60 dB(A) 64 dB(A)
Printing 74 dB(A) 78 dB(A)
InfoPrint Pro 1107
Standby 66 dB(A) 70 dB(A)
Printing 76 dB(A) 80 dB(A)
InfoPrint Pro 1357
Standby 73.5 dB(A) 77.5 dB(A)
Printing 78.5 dB(A) 82.5 dB(A)


InfoPrint Pro 907EX, 1107EX, 1357EX:

 Printer Full System
---------- -----------
InfoPrint Pro 907EX
Standby 60 dB(A) 64 dB(A)
Printing 74 dB(A) 78 dB(A)
InfoPrint Pro 1107EX
Standby 66 dB(A) 70 dB(A)
Printing 76 dB(A) 80 dB(A)
InfoPrint Pro 1357EX
Standby 73.5 dB(A) 77.5 dB(A)
Printing 78.5 dB(A) 82.5 dB(A)

Special Feature Codes -- Chargeable

 Factory Field
Mach Feature Feature
Type Model Number Number Description
---- ----- ------- ------- -------------------------------------
2708 P01 InfoPrint Pro 907
9925 NA 208V - 240V
9926 EU 220V - 240V

2708 P02 InfoPrint Pro 1107
9925 NA 208V - 240V
9926 EU 220V - 240V

2708 P03 InfoPrint Pro 1357
9925 NA 208V - 240V
9926 EU 220V - 240V

4900 CSS Installation

4728 Decurl Unit

4924 4925 IPDS Unit - NA
4950 4951 IPDS Unit - EU/AP

4700 4701 A3/11 x 17 in. Tray Unit TK5010
4720 4721 A4, Letter LCT RT5030 - NA
4722 4723 A4, Letter LCT RT5030 - EU/AP
4724 4725 A3/DLT LCT RT5040 - NA
4726 4727 A3/DLT LCT RT5040 - EU/AP

4730 4731 Multi-folding Unit FD5000 - NA
4732 4733 Multi-folding Unit FD5000 - EU/AP

4712 4713 Booklet Finisher SR5020 - NA
4714 4715 Booklet Finisher SR5020 - EU/AP

4540 4541 Finisher SR5000

4502 4503 Multi Bypass Tray BY5000

4600 4601 Cover Interposer Tray CI5010

4620 4621 2/3 Hole Punch for SR5000

4622 4623 2/4 Hole Punch for SR5000

4624 4625 4 Hole Punch for SR5000

4820 4821 2/3 Hole Punch for SR5020

4822 4823 2/4 Hole Punch for SR5020

4716 4717 Trimmer Unit - NA

4718 4719 Trimmer Unit - EU/AP

4734 4735 High Capacity Stacker SK5010 - NA
4736 4737 High Capacity Stacker SK5010 - EU/AP

4738 4739 Roll Away Cart Type 5010

4110 4111 TCRU Type 907/1107 - NA

4112 4113 TCRU Type 907/1107 - EU/AP

4114 4115 TCRU Type 1357 - NA

4116 4117 TCRU Type 1357 - EU/AP

4934 4935 HDD Encryption Unit Type A

4938 4939 Data Overwrite Security Unit Type M

4944 4945 VM Card Type K - NA
4946 4947 VM Card Type K - EU

4740 4741 Attention Light AL5000

Line cords for Multifunction Folder, High Capacity Stacker, Booklet
Finisher, and Trimmer
9970 4770 Line Cord - Europe
9971 4771 Line Cord - UK and others
9973 4773 Line Cord - Italy
9251 4751 Line Cord - US/Canada
9250 4750 Line Cord - US Chicago
9974 4774 Line Cord - Switzerland
9975 4775 Line Cord - Denmark
9977 4777 Line Cord - Netherlands
9978 4778 Line Cord - Russia
9985 4785 Line Cord - South Africa

Factory Field
Mach Feature Feature
Type Model Number Number Description
---- ----- ------- ------- -------------------------------------
2708 M01 InfoPrint Pro 907EX
9925 NA 208V - 240V
9926 EU 220V - 240V

2708 M02 InfoPrint Pro 1107EX
9925 NA 208V - 240V
9926 EU 220V - 240V

2708 M03 InfoPrint Pro 1357EX
9925 NA 208V - 240V
9926 EU 220V - 240V

4900 CSS Installation

5000 5001 EFI Fiery Print Controller (EB-1357) - NA
5010 5011 EFI Fiery Print Controller (EB-1357) - EU/AP
4930 4931 Integrated Print Controller

4922 4923 IPDS Unit - NA
4954 4955 IPDS Unit - EU
4956 4957 IPDS Unit - AP

4700 4701 A3/11 x 17 in. Tray Unit TK5010
4720 4721 A4, Letter LCT RT5030 - NA
4722 4723 A4, Letter LCT RT5030 - EU/AP
4724 4725 A3/DLT LCT RT5040 - NA
4726 4727 A3/DLT LCT RT5040 - EU/AP

4730 4731 Multi-folding Unit FD5000 - NA
4732 4733 Multi-folding Unit FD5000 - EU/AP

4712 4713 Booklet Finisher SR5020 - NA
4714 4715 Booklet Finisher SR5020 - EU/AP

4540 4541 Finisher SR5000

4502 4503 Multi Bypass Tray BY5000

4600 4601 Cover Interposer Tray CI5010

4620 4621 2/3 Hole Punch for SR5000

4622 4623 2/4 Hole Punch for SR5000

4624 4625 4 Hole Punch for SR5000

4820 4821 2/3 Hole Punch for SR5020

4822 4823 2/4 Hole Punch for SR5020

4716 4717 Trimmer Unit - NA
4718 4719 Trimmer Unit - EU/AP

4734 4735 High Capacity Stacker SK5010 - NA
4736 4737 High Capacity Stacker SK5010 - EU/AP

4738 4739 Roll Away Cart Type 5010

4110 4111 TCRU Type 907/1107 - NA

4112 4113 TCRU Type 907/1107 - EU/AP

4114 4115 TCRU Type 1357 - NA

4116 4117 TCRU Type 1357 - EU/AP

4926 4927 PostScript 3 Unit Type 1357 - NA
4958 4959 PostScript 3 Unit Type 1357 - EU
4960 4961 PostScript 3 Unit Type 1357 - AP

4938 4939 File Format Converter Type E

4932 4933 Data Overwrite Security Unit Type H

4934 4935 HDD Encryption Unit Type A

4936 4937 Copy Data Security Unit Type F

4280 4281 Gigabit Ethernet Type B

4940 4941 VM Card Type J - NA
4962 4963 VM Card Type J - EU
4964 4965 VM Card Type J - AP

4150 4151 Copy Connector Type 3260

4728 4729 Decurl Unit

5004 5005 EFI Compose, Fiery Edition

5002 5003 EFI Impose Software

5006 5007 EFI FACI Furniture Bundle

5008 5009 EFI FACI Enabler

5012 5013 External HDD Security Kit

Line cords for Multifunction Folder, High Capacity Stacker, Booklet
Finisher, and Trimmer
9970 4770 Line Cord - Europe
9971 4771 Line Cord - UK and others
9973 4773 Line Cord - Italy
9251 4751 Line Cord - US/Canada
9250 4750 Line Cord - US Chicago
9974 4774 Line Cord - Switzerland
9975 4775 Line Cord - Denmark
9977 4777 Line Cord - Netherlands
9978 4778 Line Cord - Russia
9985 4785 Line Cord - South Africa

ServicePacs
Part
Description number
-------------------------------------- -------
0k/mo (standard plan),
Models M01, M02, M03, P01, P02, P03

1 Yr IOR 9x5NBD sgl click 0k Usage 81Y0492
1 Yr IOR 9x5NBD dbl click 0k Usage 81Y0493
1 Yr IOR 24x7SD sgl click 0k Usage 81Y0494
1 Yr IOR 24x7SD dbl click 0k Usage 81Y0495
2 Yr IOR 9x5NBD sgl click 0k Usage 81Y0496
2 Yr IOR 9x5NBD dbl click 0k Usage 81Y0497
2 Yr IOR 24x7SD sgl click 0k Usage 81Y0498
2 Yr IOR 24x7SD dbl click 0k Usage 81Y0499
1 Yr IOR 9x5NBD sgl click 0k Usage 81Y0500
1 Yr IOR 9x5NBD dbl click 0k Usage 81Y0501
1 Yr IOR 24x7SD sgl click 0k Usage 81Y0502
1 Yr IOR 24x7SD dbl click 0k Usage 81Y0503
2 Yr IOR 9x5NBD sgl click 0k Usage 81Y0504
2 Yr IOR 9x5NBD dbl click 0k Usage 81Y0505
2 Yr IOR 24x7SD sgl click 0k Usage 81Y0506
2 Yr IOR 24x7SD dbl click 0k Usage 81Y0507
3 Yr IOR 9x5NBD sgl click 0k Usage 81Y0508
3 Yr IOR 9x5NBD dbl click 0k Usage 81Y0509
3 Yr IOR 24x7SD sgl click 0k Usage 81Y0510
3 Yr IOR 24x7SD dbl click 0k Usage 81Y0511

50k/mo, Models M01, P01
1 Yr IOR 9x5NBD sgl click 50k Usage 81Y0512
1 Yr IOR 9x5NBD dbl click 50k Usage 81Y0513
1 Yr IOR 24x7SD sgl click 50k Usage 81Y0514
1 Yr IOR 24x7SD dbl click 50k Usage 81Y0515
2 Yr IOR 9x5NBD sgl click 50k Usage 81Y0516
2 Yr IOR 9x5NBD dbl click 50k Usage 81Y0517
2 Yr IOR 24x7SD sgl click 50k Usage 81Y0518
2 Yr IOR 24x7SD dbl click 50k Usage 81Y0519
1 Yr IOR 9x5NBD sgl click 50k Usage 81Y0520
1 Yr IOR 9x5NBD dbl click 50k Usage 81Y0521
1 Yr IOR 24x7SD sgl click 50k Usage 81Y0522
1 Yr IOR 24x7SD dbl click 50k Usage 81Y0523
2 Yr IOR 9x5NBD sgl click 50k Usage 81Y0524
2 Yr IOR 9x5NBD dbl click 50k Usage 81Y0525
2 Yr IOR 24x7SD sgl click 50k Usage 81Y0526
2 Yr IOR 24x7SD dbl click 50k Usage 81Y0527
3 Yr IOR 9x5NBD sgl click 50k Usage 81Y0528
3 Yr IOR 9x5NBD dbl click 50k Usage 81Y0529
3 Yr IOR 24x7SD sgl click 50k Usage 81Y0530
3 Yr IOR 24x7SD dbl click 50k Usage 81Y0531

100k/mo, Models M01, M02, P01, P02
1 Yr IOR 9x5NBD sgl click 100k Usage 81Y0532
1 Yr IOR 9x5NBD dbl click 100k Usage 81Y0533
1 Yr IOR 24x7SD sgl click 100k Usage 81Y0534
1 Yr IOR 24x7SD dbl click 100k Usage 81Y0535
2 Yr IOR 9x5NBD sgl click 100k Usage 81Y0536
2 Yr IOR 9x5NBD dbl click 100k Usage 81Y0537
2 Yr IOR 24x7SD sgl click 100k Usage 81Y0538
2 Yr IOR 24x7SD dbl click 100k Usage 81Y0539
1 Yr IOR 9x5NBD sgl click 100k Usage 81Y0540
1 Yr IOR 9x5NBD dbl click 100k Usage 81Y0541
1 Yr IOR 24x7SD sgl click 100k Usage 81Y0542
1 Yr IOR 24x7SD dbl click 100k Usage 81Y0543
2 Yr IOR 9x5NBD sgl click 100k Usage 81Y0544
2 Yr IOR 9x5NBD dbl click 100k Usage 81Y0545
2 Yr IOR 24x7SD sgl click 100k Usage 81Y0546
2 Yr IOR 24x7SD dbl click 100k Usage 81Y0547
3 Yr IOR 9x5NBD sgl click 100k Usage 81Y0548
3 Yr IOR 9x5NBD dbl click 100k Usage 81Y0549
3 Yr IOR 24x7SD sgl click 100k Usage 81Y0550
3 Yr IOR 24x7SD dbl click 100k Usage 81Y0551

175k/mo,
Models M01, M02, M03, P01, P02, P03
1 Yr IOR 9x5NBD sgl click 175k Usage 81Y0552
1 Yr IOR 9x5NBD dbl click 175k Usage 81Y0553
1 Yr IOR 24x7SD sgl click 175k Usage 81Y0554
1 Yr IOR 24x7SD dbl click 175k Usage 81Y0555
2 Yr IOR 9x5NBD sgl click 175k Usage 81Y0556
2 Yr IOR 9x5NBD dbl click 175k Usage 81Y0557
2 Yr IOR 24x7SD sgl click 175k Usage 81Y0558
2 Yr IOR 24x7SD dbl click 175k Usage 81Y0559
1 Yr IOR 9x5NBD sgl click 175k Usage 81Y0560
1 Yr IOR 9x5NBD dbl click 175k Usage 81Y0561
1 Yr IOR 24x7SD sgl click 175k Usage 81Y0562
1 Yr IOR 24x7SD dbl click 175k Usage 81Y0563
2 Yr IOR 9x5NBD sgl click 175k Usage 81Y0564
2 Yr IOR 9x5NBD dbl click 175k Usage 81Y0565
2 Yr IOR 24x7SD sgl click 175k Usage 81Y0566
2 Yr IOR 24x7SD dbl click 175k Usage 81Y0567
3 Yr IOR 9x5NBD sgl click 175k Usage 81Y0568
3 Yr IOR 9x5NBD dbl click 175k Usage 81Y0569
3 Yr IOR 24x7SD sgl click 175k Usage 81Y0570
3 Yr IOR 24x7SD dbl click 175k Usage 81Y0571

250k/mo,
Models M01, M02, M03, P01, P02, P03
1 Yr IOR 9x5NBD sgl click 250k Usage 81Y0572
1 Yr IOR 9x5NBD dbl click 250k Usage 81Y0573
1 Yr IOR 24x7SD sgl click 250k Usage 81Y0574
1 Yr IOR 24x7SD dbl click 250k Usage 81Y0575
2 Yr IOR 9x5NBD sgl click 250k Usage 81Y0576
2 Yr IOR 9x5NBD dbl click 250k Usage 81Y0577
2 Yr IOR 24x7SD sgl click 250k Usage 81Y0578
2 Yr IOR 24x7SD dbl click 250k Usage 81Y0579
1 Yr IOR 9x5NBD sgl click 250k Usage 81Y0580
1 Yr IOR 9x5NBD dbl click 250k Usage 81Y0581
1 Yr IOR 24x7SD sgl click 250k Usage 81Y0582
1 Yr IOR 24x7SD dbl click 250k Usage 81Y0583
2 Yr IOR 9x5NBD sgl click 250k Usage 81Y0584
2 Yr IOR 9x5NBD dbl click 250k Usage 81Y0585
2 Yr IOR 24x7SD sgl click 250k Usage 81Y0586
2 Yr IOR 24x7SD dbl click 250k Usage 81Y0587
3 Yr IOR 9x5NBD sgl click 250k Usage 81Y0588
3 Yr IOR 9x5NBD dbl click 250k Usage 81Y0589
3 Yr IOR 24x7SD sgl click 250k Usage 81Y0590
3 Yr IOR 24x7SD dbl click 250k Usage 81Y0591

350k/mo,
Models M01, M02, M03, P01, P02, P03
1 Yr IOR 9x5NBD sgl click 350k Usage 81Y0592
1 Yr IOR 9x5NBD dbl click 350k Usage 81Y0593
1 Yr IOR 24x7SD sgl click 350k Usage 81Y0594
1 Yr IOR 24x7SD dbl click 350k Usage 81Y0595
2 Yr IOR 9x5NBD sgl click 350k Usage 81Y0596
2 Yr IOR 9x5NBD dbl click 350k Usage 81Y0597
2 Yr IOR 24x7SD sgl click 350k Usage 81Y0598
2 Yr IOR 24x7SD dbl click 350k Usage 81Y0599
1 Yr IOR 9x5NBD sgl click 350k Usage 81Y0600
1 Yr IOR 9x5NBD dbl click 350k Usage 81Y0601
1 Yr IOR 24x7SD sgl click 350k Usage 81Y0602
1 Yr IOR 24x7SD dbl click 350k Usage 81Y0603
2 Yr IOR 9x5NBD sgl click 350k Usage 81Y0604
2 Yr IOR 9x5NBD dbl click 350k Usage 81Y0605
2 Yr IOR 24x7SD sgl click 350k Usage 81Y0606
2 Yr IOR 24x7SD dbl click 350k Usage 81Y0607
3 Yr IOR 9x5NBD sgl click 350k Usage 81Y0608
3 Yr IOR 9x5NBD dbl click 350k Usage 81Y0609
3 Yr IOR 24x7SD sgl click 350k Usage 81Y0610
3 Yr IOR 24x7SD dbl click 350k Usage 81Y0611

500k/mo, Models M02, M03, P02, P03
1 Yr IOR 9x5NBD sgl click 500k Usage 81Y0612
1 Yr IOR 9x5NBD dbl click 500k Usage 81Y0613
1 Yr IOR 24x7SD sgl click 500k Usage 81Y0614
1 Yr IOR 24x7SD dbl click 500k Usage 81Y0615
2 Yr IOR 9x5NBD sgl click 500k Usage 81Y0616
2 Yr IOR 9x5NBD dbl click 500k Usage 81Y0617
2 Yr IOR 24x7SD sgl click 500k Usage 81Y0618
2 Yr IOR 24x7SD dbl click 500k Usage 81Y0619
1 Yr IOR 9x5NBD sgl click 500k Usage 81Y0620
1 Yr IOR 9x5NBD dbl click 500k Usage 81Y0621
1 Yr IOR 24x7SD sgl click 500k Usage 81Y0622
1 Yr IOR 24x7SD dbl click 500k Usage 81Y0623
2 Yr IOR 9x5NBD sgl click 500k Usage 81Y0624
2 Yr IOR 9x5NBD dbl click 500k Usage 81Y0625
2 Yr IOR 24x7SD sgl click 500k Usage 81Y0626
2 Yr IOR 24x7SD dbl click 500k Usage 81Y0627
3 Yr IOR 9x5NBD sgl click 500k Usage 81Y0628
3 Yr IOR 9x5NBD dbl click 500k Usage 81Y0629
3 Yr IOR 24x7SD sgl click 500k Usage 81Y0630
3 Yr IOR 24x7SD dbl click 500k Usage 81Y0631


Feature Descripitions

Line Cords

Order line cord based on country the cutsheet product will be placed.

InfoPrint Pro 907, InfoPrint Pro 1107, and InfoPrint Pro 1357

Features supported:

(#9925) NA 208V - 240 V

This feature should be ordered for the following countries at initial order: Canada and United States.

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9926

(#9926) EU 220 - 240V

This feature should be ordered for the following countries at initial order: Austria, Belgium, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Russia, South Africa, Spain, Sweden, Switzerland, Turkey, UK, Hong Kong, India, and Singapore.

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9925

The features below provide the proper power plug to attach power to the printer. Since different physical plugs are required in different 50 Hz countries, one of the following feature codes must be specified. Refer to the table below for selected countries. The feature code must be choosen based on where the printer will be installed.

Countries Feature
--------------------------------------------------- -------
Austria, Belgium, Finland, France, Germany, Italy, 9927
Netherlands, Norway, Russia, Spain, Sweden, Turkey

Denmark, South Africa, Switzerland, United Kingdom 9928


(#9927) Printer Line Cord Typical (SCHUKO Plug)

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9928

(#9928) Printer Line Cord Other (IEC-60309 Plug)

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9927

(#4900) CSS Installation

This feature provides InfoPrint Solutions Company Customer Support Specialist (CSS) installation for the InfoPrint Pro 907, InfoPrint Pro 907EX, InfoPrint Pro 1107, InfoPrint Pro 1107EX, InfoPrint Pro 1357, and InfoPrint Pro 1357EX and is required at initial order.

Configuration rules:

  • Minimum required = 1
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4728) Decurl Unit

This is a mandatory feature and must be ordered with the printer.

The Decurl Unit will reduce the paper curl, which can be a cause of paper jams; and reduced curl helps to provide a professional look to the output.

The level of the decurling force can be set from the Operation Panel, and can be changed from back curl to front curl.

Users can select a suitable pressure level of decurling from five levels.

Configuration rules:

  • #4728 = factory
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4724/#4725) A3/DLT Large Capacity Tray RT5040 - NA

(#4726/#4727) A3/DLT Large Capacity Tray RT5040 - EU/AP

This A3/DLT Large Capacity Tray (Feeder) will support large size media up to 13 X 19.2 in. (330.2 x 487.7 mm)

This feeder has an air-assist feature that enables it to handle various paper types such as coated paper and a wide range of paper thickness from thin paper (40 gsm) to thick paper (up to 300 gsm). These papers are often required for production printing.

This tray has a redesigned side paper fence with plated and wave- shaped spring plates. These plates help to prevent glue buildup from the edges of labels and increase reliability of feeding labels.

The input trays can be secured with a lock for security. This lock can be used to secure documents such as checks and securities. The lock is located inside the drawers so that it is not visible.

The handles on the drawers are easy to grip both overhand and underhand. The trays open with less force than on previous models.

The capacity of the drawers:

  • Fourth tray: 1,000 sheets
  • Fifth tray: 2,000 sheets
  • Sixth tray: 1,000 sheets

Paper characteristics:

  • Fourth tray: 52-256 g/m2 14 lb Bond - 95 lb Cover
  • Fifth tray: 40-300 g/m2 11 lb Bond - 110 lb Cover
  • Sixth tray: 52 -256 g/m2 14 lb Bond - 95 lb Cover

Paper size: A5 (SEF)/HLT (SEF) - 13 x 19.2 in.

Custom size paper:

  • Width: 100.0 - 330.2 mm (3.94 - 13.00 in.)
  • Length: 139.7 - 487.7 mm (5.50 - 19.20 in.)

Configuration rules:

  • #4724/4726 = factory; #4725/4727 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = #9925 for #4724/4725 and #9926 for #4726/4727
  • Corequisite = None
  • Compatibility conflicts = Any combination of A3/DLT Large Capacity Tray RT5040 and A4/Ltr Large Capacity Tray RT5030

(#4720/#4721) A4/Ltr Large Capacity Tray RT5030 - NA

(#4722/#4723) A4/Ltr Large Capacity Tray RT5030 - EU/AP

This Large Capacity Tray (Feeder) consists of three input drawers.

A security lock feature is included on all trays that can be used to secure documents such as checks or securities.

The capacity of the drawers:

  • Fourth tray: 1,000 sheets
  • Fifth tray: 1,000 sheets
  • Sixth tray: 2,550 sheets

Supported paper sizes:

  • A4_LEF, B5_LEF, A5_SEF, LT_LEF, HLT_SEF
  • Custom paper sizes
    • Width: 210 - 305.0 mm (8.27 - 12.00 in.)
    • Length: 139.7 - 230.0 mm (5.50 - 9.05 in.)

Paper characteristics:

  • Fourth tray: 52 - 216 g/m2; 14 lb Bond - 80 lb Cover
  • Fifth tray: 52 - 216 g/m2; 14 lb Bond - 80 lb Cover
  • Sixth tray: 52 - 163 g/m2; 14 lb Bond - 90 lb Index

Configuration rules:

  • #4720/4722 = factory; #4721/4723 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = #9925 for #4720/4721 and #9926 for #4722/4723
  • Corequisite = None
  • Compatibility conflicts = Any combination of A3/DLT Large Capacity Tray RT5040 and A4/Ltr Large Capacity Tray RT5030

(#4700/#4701) A3 11 x 17 in. Tray Kit TK5010

This optional tray replaces the first tray (tandem) in the base printer. This tray provides the capability to feed DLT or A3 paper. This first tray can normally feed LT or A4 size paper.

Specifications:

  • Paper size: A3 SEF, B4 SEF, A4, 11 x 17 in. SEF, 8 1/2 x 14 in. SEF, 8 1/2 x 11 in.
  • Paper capacity: 1,000 sheets

Configuration rules:

  • #4700 = factory; #4701 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4730/#4731) Multi-Folding Unit FD5000 - NA

(#4732/#4733) Multi-Folding Unit FD5000 - EU/AP

This Multi-Folding Unit offers six folding patterns from 2-fold to 4-fold in-line and provides a solution for many versatile folding requirements.

This Unit replaces the Z-Folding Unit that is available on previous models.

Folding types supported:

  • 2-fold
  • Z-folding
  • 3-fold (in)
  • 3-fold (out)
  • 4-fold (Gate fold)
  • 4-fold (double parallel)

Configuration rules:

  • #4730/4732 = factory; #4731/4733 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = #9925 for #4730/4731 and #9926 for #4732/4733
  • Corequisite = Finisher SR5000 or Booklet Finisher SR5020
  • Compatibility conflicts = Only one High Capacity Stacker can be installed

(#4540/#4541) Finisher SR5000

This finisher has a proof bin with 500-sheet capacity (A4/Letter) and a shift bin with 3,000-sheet capacity (A4/Letter). It has shift (offset) capability and a stapler that can staple together up to 100 sheets. Jobs cannot be stapled and shifted. If a job requests both of these, it will be stapled only.

A stack aligner is included that improves stacking. Optional hole- punching kits are also available. Only one punch kit may be installed at a time and it requires an InfoPrint Customer Support Specialist to install or change the kits. Punch jobs can go to the shift tray or proof tray.

Optional hole-punching kits are available.

Configuration rules:

  • #4540 = factory, #4541 = field
  • Minimum required = Finisher SR5000 or Booklet Finisher SR5020 or High Capacity Stacker SK5010 are required on all initial orders.
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Booklet Finisher SR5020
Media size 5.5 x 8.5 in. - 11 x 17 in.; Up to 13 x 19.2 in.
Media weight Proof Tray: 16 lb. Bond - 80 lb. Cover
Shift Tray: 16 lb. Bond - 110 lb. Cover
Stack capacity Proof Tray: 500 sheets (8.5 x 11 in. or smaller)
Shift Tray: 3,000 sheets (8.5 x 11 in. or
smaller)
Staple capacity 100 sheets: 8.5 x 11 in. 50 sheets: 8.5 x 14 in.
or smaller Z-Fold: 10 sheets
Staple positions Top, Bottom, 2 Staples, Top-Slant
Finisher accessories Hole Punch Unit (2 or 3 holes)


(#4620/#4621) 2/3-Hole Punch for SR5000 - NA

This option supports 2-hole and 3-hole punching in the U.S. format for the SR5000 3,000 Finisher (#4540/4541).

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4620 = factory, #4621 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = SR5000 Finisher (#4540/4541).
  • Corequisite = None
  • Compatibility conflicts = None

(#4622/#4623) 2/4-Hole Punch for SR5000 - EU

This option supports 2-hole and 4-hole punching in the European and Japanese format for the SR5000 Finisher.

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4622 = factory, #4623 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = SR5000 Finisher (#4540/4541)
  • Corequisite = None
  • Compatibility conflicts = None

(#4624/#4725) 4-Hole Punch for SR5000

This option supports Scandinavia 4-hole punching for the SR5000 Finisher.

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4624 = factory, #4625 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = SR5000 Finisher (#4540/4541)
  • Corequisite = None
  • Compatibility conflicts = None

(#4712/#4713) Booklet Finisher SR5020 - NA

(#4714/#4715) Booklet Finisher SR5020 - EU/AP

The finisher has the following capabilities:

  • 100-page staple features
  • Improved productivity when stapling in two positions
  • Up to 20 sheets (80 gsm) saddle stitching
  • Punch unit that allows punching at up to 135 images per minute

Configuration rules:

  • #4712/4714 = factory, #4713/4715 = field
  • Minimum required = Finisher SR5000 or Booklet Finisher SR5020 or High Capacity Stacker SK5010 are required on all initial orders.
  • Maximum allowed = 1
  • Prerequisite = #9925 for #4712/4713 and #9926 for #4714/4715
  • Corequisite = None
  • Compatibility conflicts = Finisher SR5000

(#4820/#4821) 2/3-Hole Punch for SR5020 - NA

This option supports 2-hole and 3-hole punching in the U.S. format for the Booklet Finisher SR5020 (#4712/4713 and #4714/4715)

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4820 = factory, #4821 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = Booklet Finisher SR5020 (#4712/#4713 or #4714/4715).
  • Corequisite = None
  • Compatibility conflicts = None

(#4822/#4823) 2/4-Hole Punch for SR5020 - EU

This option supports 2-hole and 4-hole punching in the European and Japanese format for the Booklet Finisher SR5020.

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4822 = factory, #4823 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = Booklet Finisher SR5020 (#4712/4713 and #4714/4715)
  • Corequisite = None
  • Compatibility conflicts = None

(#4716/#4717) Trimmer Unit TR5020 - NA

(#4718/#4719) Trimmer Unit TR5020 - EU/AP

This option for the SR5020 finisher provides One Side Edge Trimming to improve the appearance of a booklet.

Configuration rules:

  • #4716/4718 = factory, #4717/4718 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = Booklet Finisher SR5020 (#4712/4713/4714/4715)
  • Compatibility conflicts = None

(#4502/#4503) Multi-Bypass Tray BY5000

This feature increases the maximum input capacity by 500 sheets.

Configuration rules:

  • #4502 = factory, #4503 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = A3/DLT Large Capacity Tray RT5040 or A4/Ltr Large Capacity Tray RT5030
  • Compatibility conflicts = None
Media capacity 500 sheets
Media size 5.5 x 8.5 in. - 13 x 18 in.
Media weight 16 lb. Bond - 80 lb. Cover/120 lb. Index


(#4600/#4601) CI5010 Cover Interposer

This feature allows media, such as covers to be inserted into the print job. The media is inserted after fusing.

Configuration rules:

  • #4600 = factory, #4601 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite: None
  • Compatibility conflicts = None
Stack capacity 2 x 200-Sheet Trays
Media size 5.5 x 8.5 in. - 13 x 19.2 in.
Media weight 17 lb. Bond - 80 lb. Cover


(#4734/#4735) High Capacity Stacker SK5010 - NA

(#4736/#4737) High Capacity Stacker SK5010 - EU/AP

This High Capacity Stacker has a capacity of 5,000 sheets. Two stacker units can be attached for a total output capacity of 10,000 sheets.

A jogger unit to provide better stacking performance is included with this stacker.

A roll-away cart is included with the stacker so that the output can be easily transported for finishing, packing, and distribution.

The High Capacity Stacker can be secured with a lock to provide security for documents such as checks and securities.

Specifications:

  • Power supply
    • NA: 120 V, 60 Hz (#4734/4735)
    • EU: 220-240 V, 50/60 Hz (#4736/4737)
    • Proof tray
      • Paper size: A6T to 331 x 488 mm (13 x 19.2 in.)
      • Paper weight: 52 - 300 g/m2 (40 - 52 g/m2 paper has to be tested)
      • Stack Capacity: 250 sheets
    • Shift tray
    • Paper size: 210 x 210 mm(3) - 331 x 488 mm (13 x 19.2 in.)
    • Paper weight: 52 - 300 g/m2 (40 - 52 g/m2 paper has to be tested)
    • Stack Capacity: A4/LT - SRA3 (13 x 19.2 in.): 5,000 sheets and B5-Half LT: 2,500 sheets

Note: (3) The area (width x length) has to be larger than the area of Letter Size (8.5 x 11 in.).

Configuration rules:

  • #4734/4736 = factory, #4735/4737 = field
  • Minimum required = 0
  • Maximum allowed = 2 if Booklet Finisher SR5020 is installed or 1 if Finisher SR5000 is installed
  • Prerequisite = None
  • Co-requisite = For Models M01, M02, M03 the Decurl Unit must be ordered (this is standard on Models P01, P02, P03)
  • Compatibility conflicts = None

(#4738/#4739) Roll-away Cart Type 5010

This feature provides an additional roll-away cart. One cart is included with the High Capacity Stacker (#4734/4735/ 4736/4737).

This cart is used for transporting printer output for finishing, packing, and distribution.

Configuration rules:

  • #4738 = factory, #4739 = field
  • Minimum required = 0
  • Maximum allowed = No maximum
  • Prerequisite = None
  • Co-requisite = None
  • Compatibility conflicts = None

(#4110/#4111) TCRU Type 907/1107 - NA

(#4112/#4113) TCRU Type 907/1107 - EU/AP

Trained Customer Replaceable Units (TCRU)

The InfoPrint Pro 907 and 1107 are designed with a TCRU concept. Trained customers can replace TCRU units, and reduce printer downtime.

This is a mandatory feature.

The TCRU includes:

  • Drum
  • Development unit
  • Cleaning unit
  • Charger
  • Precharge
  • Fusing unit
  • Cleaning web
  • Paper feed rollers

This feature is available as a convenience to customers. The parts provided by this feature are for customer installation after the appropriate customer personnel have been trained by an InfoPrint Customer Support Specialist.

The InfoPrint Customer Support Specialist will replace or rebuild parts in this as they are used, if the printer is covered by a maintenance agreement. This kit normally needs to be purchased only once per printer.

Instructions to install these parts are included with this feature.

Configuration rules:

  • #4110/4112 = factory, #4111/4113 = field
  • Minimum required = 1
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4114/#4115) TCRU Type 1357 - NA

(#4116/#4117) TCRU Type 1357 - EU/AP

This is the Trained Customer Replaceable Units (TCRU) for the InfoPrint Pro 1357 and is a mandatory feature.

(#4924/#4925) IPDS Unit - NA

(#4950/#4951) IPDS Unit - EU/AP

This feature provides support for the IPDS data stream. It is supported on the InfoPrint Pro 907, 1107, and 1357.

Configuration rules:

  • #4924 = factory; #4925 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4944/#4945) VM Card Type K - NA

(#4946/#4947) VM Card Type K - EU

This feature allows the printer to run Java-based applications. It is supported on the InfoPrint Pro 907, 1107, and 1357 only.

(#4938/#4939) Data Overwrite Security Unit Type M

This feature is for the InfoPrint Pro 907, 1107, and 1357 only. The Data Overwrite Security Unit overwrites data that is temporarily stored on the hard drive by writing over the latent image with the following:

  • First pass: Overwrite with random data, 1's and 0's
  • Second pass: Overwrite again with random data, 1's and 0's
  • Third pass: Overwrite with null data, all 0's

This three-pass data overwrite operation is designed to reduce risk of anyone trying to access and reconstruct confidential information.

The only way to turn this feature off is by physically removing this feature from the printer.

Configuration rules:

  • #4938 for initial order, #4939 for MES
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4740/#4741) Attention Light

The attention light feature is a large light and buzzer that alerts the operator when the printer needs attention. It supported on the InfoPrint Pro 907, 1107, and 1357 only.

Configuration rules:

  • #4740 for initial order, #4741 for MES
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4934/#4935) HDD Encryption Unit Type A It can encrypt HDD data to

prevent data theft.

Configuration rules:

  • #4934 = factory, #4935 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

InfoPrint Pro 907EX, InfoPrint Pro 1107EX, and InfoPrint Pro

1357EX

Basic configuration:

  • Plotting engine
  • Integrated Print Controller or External EFI Fiery Print Controller
  • Scanner unit
  • First Tray: 1,000 sheets x 2 (Tandem tray)
  • Second and third Tray: 500 sheets tray X 2
  • 10.4-inch LCD operation panel

Line Cords

Order line cord based on country the cutsheet product will be placed. The "UK and others" line cord supports UK, Hong Kong, Singapore, and India.

InfoPrint Pro 907EX, InfoPrint Pro 1107EX, and InfoPrint

Pro 1357EX

Features supported:

(#9925) NA 208V - 240 V

This feature should be ordered for the following countries at initial order: Canada and United States.

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9926

(#9926) EU 220 - 240V

This feature should be ordered for the following countries at initial order: Austria, Belgium, Denmark, Finland, France, Germany, Italy, Norway, Spain, Sweden, Switzerland, Turkey, UK, Hong Kong, India, and Singapore.

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9925

The features below provide the proper power plug to attach power to the printer. Since different physical plugs are required in different 50 Hz countries, one of the following feature codes must be specified. Refer to the table below for selected countries. The feature code must be choosen based on where the printer will be installed.

Countries Feature
--------------------------------------------------- -------
Austria, Belgium, Finland, France, Germany, Italy, 9927
Netherlands, Norway, Russia, Spain, Sweden, Turkey

Denmark, South Africa, Switzerland, United Kingdom 9928


(#9927) Printer Line Cord Typical (SCHUKO Plug)

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9928

(#9928) Printer Line Cord Other (IEC-60309 Plug)

Configuration rules:

  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Not with feature number 9927

(#4900) CSS Installation

This feature provides InfoPrint Solutions Company Customer Support Specialist (CSS) installation for the InfoPrint Pro 907, InfoPrint Pro 907EX, InfoPrint Pro 1107, InfoPrint Pro 1107EX, InfoPrint Pro 1357, and InfoPrint Pro 1357EX and should be ordered for all countries at initial order.

Configuration rules:

  • Minimum required = 1
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4728/#4729) Decurl Unit

The Decurl Unit will reduce the paper curl, which can be a cause of paper jams; and reduced curl helps to provide a professional look to the output.

The level of the decurling force can be set from the Operation Panel, and can be changed from back curl to front curl.

Users can select a suitable pressure level of decurling from five levels.

Configuration rules:

  • #4728 = factory, #4729 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4724/#4725) A3/DLT Large Capacity Tray RT5040 - NA

(#4726/#4727) A3/DLT Large Capacity Tray RT5040 - EU/AP

This A3/DLT Large Capacity Tray (Feeder) will support large size media up to 13 X 19.2 in. (330.2 x 487.7 mm)

This feeder has an air-assist feature that enables it to handle various paper types such as coated paper and a wide range of paper thickness from thin paper (40 gsm) to thick paper (up to 300 gsm). These papers are often required for production printing.

This tray has a redesigned side paper fence with plated and wave- shaped spring plates. These plates help to prevent glue buildup from the edges of labels and increase reliability of feeding labels.

The input trays can be secured with a lock for security. This lock can be used to secure documents such as checks and securities. The lock is located inside the drawers so that it is not visible.

The handles on the drawers are easy to grip both overhand and underhand. The trays open with less force than on previous models.

The capacity of the drawers:

  • Fourth tray: 1,000 sheets
  • Fifth tray: 2,000 sheets
  • Sixth tray: 1,000 sheets

Paper characteristics:

  • Fourth tray: 52-256 g/m2 14 lb Bond - 95 lb Cover
  • Fifth tray: 40-300 g/m2 11 lb Bond - 110 lb Cover
  • Sixth tray: 52 -256 g/m2 14 lb Bond - 95 lb Cover

Paper size: A5 (SEF)/HLT (SEF) - 13 x 19.2 in.

Custom size paper:

  • Width: 100.0 - 330.2 mm (3.94 - 13.00 in.)
  • Length: 139.7 - 487.7 mm (5.50 - 19.20 in.)

Configuration rules:

  • #4724/4726 = factory; #4725/4727 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = #9925 for #4724/4725 and #9926 for #4726/4727
  • Corequisite = None
  • Compatibility conflicts = Any combination of A3/DLT Large Capacity Tray RT5040 and A4/Ltr Large Capacity Tray RT5030

(#4720/#4721) A4/Ltr Large Capacity Tray RT5030 - NA

(#4722/#4723) A4/Ltr Large Capacity Tray RT5030 - EU/AP

This Large Capacity Tray (Feeder) consists of three input drawers.

A security lock feature is included on all trays that can be used to secure documents such as checks or securities.

The capacity of the drawers:

  • Fourth tray: 1,000 sheets
  • Fifth tray: 1,000 sheets
  • Sixth tray: 2,550 sheets

Supported paper sizes:

  • A4_LEF, B5_LEF, A5_SEF, LT_LEF, HLT_SEF
  • Custom paper sizes
    • Width: 210 - 305.0 mm (8.27 - 12.00 in.)
    • Length: 139.7 - 230.0 mm (5.50 - 9.05 in.)

Paper characteristics:

  • Fourth tray: 52 - 216 g/m2; 14 lb Bond - 80 lb Cover
  • Fifth tray: 52 - 216 g/m2; 14 lb Bond - 80 lb Cover
  • Sixth tray: 52 - 163 g/m2; 14 lb Bond - 90 lb Index

Configuration rules:

  • #4720/4722 = factory; #4721/4723 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = #9925 for #4720/4721 and #9926 for #4722/4723
  • Corequisite = None
  • Compatibility conflicts = Any combination of A3/DLT Large Capacity Tray RT5040 and A4/Ltr Large Capacity Tray RT5030

(#4700/#4701) A3 11 x 17 in. Tray Kit TK5010

This optional tray replaces the first tray (tandem) in the base printer. This tray provides the capability to feed DLT or A3 paper. This first tray can normally feed LT or A4 size paper.

Specifications:

  • Paper size: A3 SEF, B4 SEF, A4, 11 x 17 in. SEF, 8 1/2 x 14 in. SEF, 8 1/2 x 11 in.
  • Paper capacity: 1,000 sheets

Configuration rules:

  • #4700 = factory; #4701 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4730/#4731) Multi-Folding Unit FD5000 - NA

(#4732/#4733) Multi-Folding Unit FD5000 - EU/AP

This Multi-Folding Unit offers six folding patterns from 2-fold to 4-fold in-line and provides a solution for many versatile folding requirements.

This Unit replaces the Z-Folding Unit that is available on previous models.

Folding types supported:

  • 2-fold
  • Z-folding
  • 3-fold (in)
  • 3-fold (out)
  • 4-fold (Gate fold)
  • 4-fold (double parallel)

Configuration rules:

  • #4730/4732 = factory; #4731/4733 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = #9925 for #4730/4731 and #9926 for #4732/4733
  • Corequisite = Finisher SR5000 or Booklet Finisher SR5020
  • Compatibility conflicts = Only one High Capacity Stacker can be installed

(#4540/#4541) Finisher SR5000

This finisher has a proof bin with 500-sheet capacity (A4/Letter) and a shift bin with 3,000-sheet capacity (A4/Letter). It has shift (offset) capability and a stapler that can staple together up to 100 sheets. Jobs cannot be stapled and shifted. If a job requests both of these, it will be stapled only.

A stack aligner is included that improves stacking. Optional hole- punching kits are also available. Only one punch kit may be installed at a time and it requires an InfoPrint Customer Support Specialist to install or change the kits. Punch jobs can go to the shift tray or proof tray.

Optional hole-punching kits are available.

Configuration rules:

  • #4540 = factory, #4541 = field
  • Minimum required = Finisher SR5000 or Booklet Finisher SR5020 or High Capacity Stacker SK5010 are required on all initial orders.
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Booklet Finisher SR5020
Media size 5.5 x 8.5 in. - 11 x 17 in.; Up to 13 x 19.2 in.
Media weight Proof Tray: 16 lb. Bond - 80 lb. Cover
Shift Tray: 16 lb. Bond - 110 lb. Cover
Stack capacity Proof Tray: 500 sheets (8.5 x 11 in. or smaller)
Shift Tray: 3,000 sheets (8.5 x 11 in. or
smaller)
Staple capacity 100 sheets: 8.5 x 11 in. 50 sheets: 8.5 x 14 in.
or smaller Z-Fold: 10 sheets
Staple positions Top, Bottom, 2 Staples, Top-Slant
Finisher accessories Hole Punch Unit (2 or 3 holes)


(#4620/#4621) 2/3-Hole Punch for SR5000 - NA

This option supports 2-hole and 3-hole punching in the U.S. format for the SR5000 3,000 Finisher (#4540/4541).

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4620 = factory, #4621 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = SR5000 Finisher (#4540/4541).
  • Corequisite = None
  • Compatibility conflicts = None

(#4622/#4623) 2/4-Hole Punch for SR5000 - EU

This option supports 2-hole and 4-hole punching in the European and Japanese format for the SR5000 Finisher.

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4622 = factory, #4623 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = SR5000 Finisher (#4540/4541)
  • Corequisite = None
  • Compatibility conflicts = None

(#4624/#4625) 4-Hole Punch for SR5000

This option supports Scandinavia 4-hole punching for the SR5000 Finisher.

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4624 = factory, #4625 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = SR5000 Finisher (#4540/4541)
  • Corequisite = None
  • Compatibility conflicts = None

(#4712/#4713) Booklet Finisher SR5020 - NA

(#4714/#4715) Booklet Finisher SR5020 - EU/AP

The finisher has the following capabilities:

  • 100-page staple features
  • Improved productivity when stapling in two positions
  • Up to 20 sheets (80 gsm) saddle stitching
  • Punch unit that allows punching at up to 135 images per minute

Configuration rules:

  • #4712/4714 = factory, #4713/4715 = field
  • Minimum required = Finisher SR5000 or Booklet Finisher SR5020 or High Capacity Stacker SK5010 are required on all initial orders.
  • Maximum allowed = 1
  • Prerequisite = #9925 for #4712/4713 and #9926 for #4714/4715
  • Corequisite = None
  • Compatibility conflicts = Finisher SR5000

(#4820/#4821) 2/3-Hole Punch for SR5020 - NA

This option supports 2-hole and 3-hole punching in the U.S. format for the Booklet Finisher SR5020 (#4712/4713 and #4714/4715)

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4820 = factory, #4821 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = Booklet Finisher SR5020 (#4712/#4713 or #4714/4715).
  • Corequisite = None
  • Compatibility conflicts = None

(#4822/#4823) 2/4-Hole Punch for SR5020 - EU

This option supports 2-hole and 4-hole punching in the European and Japanese format for the Booklet Finisher SR5020.

Only one of the hole punch kits can be installed at a time although multiple hole punch kits can be ordered.

Punch kits can only be removed and installed by InfoPrint Customer Support Specialist.

Configuration rules:

  • #4822 = factory, #4823 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = Booklet Finisher SR5020 (#4712/4713 and #4714/4715)
  • Corequisite = None
  • Compatibility conflicts = None

(#4716/#4717) Trimmer Unit TR5020 - NA

(#4718/#4719) Trimmer Unit TR5020 - EU/AP

This option for the SR5020 finisher provides One Side Edge Trimming to improve the appearance of a booklet.

Configuration rules:

  • #4716/4718 = factory, #4717/4718 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = Booklet Finisher SR5020 (#4712/4713/4714/4715)
  • Compatibility conflicts = None

(#4502/#4503) Multi-Bypass Tray BY5000

This feature increases the maximum input capacity by 500 sheets.

Configuration rules:

  • #4502 = factory, #4503 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = A3/DLT Large Capacity Tray RT5040 or A4/Ltr Large Capacity Tray RT5030
  • Compatibility conflicts = None
Media capacity 500 sheets
Media size 5.5 x 8.5 in. - 13 x 18 in.
Media weight 16 lb. Bond - 80 lb. Cover/120 lb. Index


(#4600/#4601) CI5010 Cover Interposer

This feature allows media, such as covers to be inserted into the print job. The media is inserted after fusing.

Configuration rules:

  • #4600 = factory, #4601 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite: None
  • Compatibility conflicts = None
Stack capacity 2 x 200-Sheet Trays
Media size 5.5 x 8.5 in. - 13 x 19.2 in.
Media weight 17 lb. Bond - 80 lb. Cover


(#4734/#4735) High Capacity Stacker SK5010 - NA

(#4736/#4737) High Capacity Stacker SK5010 - EU/AP

This High Capacity Stacker has a capacity of 5,000 sheets. Two stacker units can be attached for a total output capacity of 10,000 sheets.

A jogger unit to provide better stacking performance is included with this stacker.

A roll-away cart is included with the stacker so that the output can be easily transported for finishing, packing, and distribution.

The High Capacity Stacker can be secured with a lock to provide security for documents such as checks and securities.

Specifications:

  • Power supply
    • NA: 120 V, 60 Hz (#4734/4735)
    • EU: 220-240 V, 50/60 Hz (#4736/4737)
    • Proof tray
      • Paper size: A6T to 331 x 488 mm (13 x 19.2 in.)
      • Paper weight: 52 - 300 g/m2 (40 - 52 g/m2 paper has to be tested)
      • Stack Capacity: 250 sheets
    • Shift tray
    • Paper size: 210 x 210 mm(4) - 331 x 488 mm (13 x 19.2 in.)
    • Paper weight: 52 - 300 g/m2 (40 - 52 g/m2 paper has to be tested)
    • Stack Capacity: A4/LT - SRA3 (13 x 19.2 in.): 5,000 sheets and B5-Half LT: 2,500 sheets

Note: (4) The area (width x length) has to be larger than the area of Letter Size (8.5 x 11 in.).

Configuration rules:

  • #4734/4736 = factory, #4735/4737 = field
  • Minimum required = 0
  • Maximum allowed = 2 if Booklet Finisher SR5020 is installed or 1 if Finisher SR5000 is installed
  • Prerequisite = None
  • Co-requisite = For Models M01, M02, M03 the Decurl Unit must be ordered (this is standard on Models P01, P02, P03)
  • Compatibility conflicts = None

(#4738/#4739) Roll-away Cart Type 5010

This feature provides an additional roll-away cart. One cart is included with the High Capacity Stacker (#4734/4735/ 4736/4737).

This cart is used for transporting printer output for finishing, packing, and distribution.

Configuration rules:

  • #4738 = factory, #4739 = field
  • Minimum required = 0
  • Maximum allowed = No maximum
  • Prerequisite = None
  • Co-requisite = None
  • Compatibility conflicts = None

(#4110/#4111) TCRU Type 907/1107 - NA

(#4112/#4113) TCRU Type 907/1107 - EU/AP (

Trained Customer Replaceable Units (TCRU)

The InfoPrint Pro 907EX and 1107EX are designed with a TCRU concept. Trained customers can replace TCRU units, and reduce printer downtime.

The TCRU includes:

  • Drum
  • Development unit
  • Cleaning unit
  • Charger
  • Precharge
  • Fusing unit
  • Cleaning web
  • Paper feed rollers

This feature is available as a convenience to customers. The parts provided by this feature are for customer installation after the appropriate customer personnel have been trained by an InfoPrint Customer Support Specialist.

The InfoPrint Customer Support Specialist will replace or rebuild parts in this as they are used, if the printer is covered by a maintenance agreement. This kit normally needs to be purchased only once per printer.

Instructions to install these parts are included with this feature.

Configuration rules:

  • #4110/4112 = factory, #4111/4113 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4114/#4115) TCRU Type 1357 - NA

(#4116/#4117) TCRU Type 1357 - EU/AP

Trained Customer Replaceable Units (TCRU)

The InfoPrint Pro 1357EX is designed with a TCRU concept. Trained customers can replace TCRU units, and reduce printer downtime.

This is a mandatory feature.

The TCRU includes:

  • Drum
  • Development unit
  • Cleaning unit
  • Charger
  • Precharge
  • Fusing unit
  • Cleaning web
  • Paper feed rollers

This feature is available as a convenience to customers. The parts provided by this feature are for customer installation after the appropriate customer personnel have been trained by an InfoPrint Customer Support Specialist.

The InfoPrint Customer Support Specialist will replace or rebuild parts in this as they are used, if the printer is covered by a maintenance agreement. This kit normally needs to be purchased only once per printer.

Instructions to install these parts are included with this feature.

Configuration rules:

  • #4114/4116 = factory, #4115/4117 = field
  • Minimum required = 1
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#5000/#5001) EFI Fiery Print Controller - NA (EB-1357)

(#5010/#5011) EFI Fiery Print Controller - EU/AP (EB-1357)

The InfoPrint Pro 907EX, 1107EX, and 1357EX must include either the EFI Fiery Print Controller or Integrated Print Controller at initial order.

This controller contains the following:

  • 2.0 GHz Intel T2500 Core 2 Duo Processor
  • 2.0 GB memory
  • 80 GB hard disk

Configuration rules:

  • #5000 = factory, #5001 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = Integrated Print Controller (#4930/4931)

(#4930/#4031) Integrated Print Controller

The InfoPrint Pro 907EX, 1107EX, and 1357EX must include either the EFI Fiery Print Controller or Integrated Print Controller at initial order.

This controller contains the following:

  • 1.4 GHz Intel Pentium-M Processor
  • 1.5 GB memory
  • 320 GB hard disk

Configuration rules:

  • #4930 = factory, #4931 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = EFI Fiery Print Controller (EB-1357) (#5000/5001)

(#4922/#4923) IPDS Unit - NA

(#4954/#4955) IPDS Unit - EU

(#4956/#4957) IPDS Unit - AP

This feature provides support for the IPDS data stream.

Configuration rules:

  • #4922 = factory; #4923 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = EFI Fiery Print Controller (EB-1357)

(#4150/#4151) Copy Connector Type 3260

The optional copy connector cable may be used to connect two printers together to load balance copy jobs between two printers. It does not double the speed of the print job.

For large volume copy runs, two connected machines form a single system that can complete the job in a shorter time.

It also allows auto-backup for less participation of operators. If one machine stops because of a paper jam or it has run out of toner or paper, the other machine will take over and finish the job automatically. When the stopped machine is recovered, the machines will allocate the job again and continue to complete the job in a way that results in maximum productivity.

The cable is 10 meters in length.

Configuration rules:

  • #4150 = factory, #4151 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = High Capacity Stacker SK5010 without a finisher installed

(#4940/#4941) VM Card Type J - NA

(#4962/#4963) VM Card Type J - EU

(#4964/#4965) VM Card Type J - AP

This feature allows the printer to run Java-based applications.

Configuration rules:

  • #4940 = factory; #4941 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4280/#4281) Gigabit Ethernet Type B

This feature is required to attach to an Ethernet network. This attachment provides 1000BaseTX Ethernet data transfer.

Configuration rules:

  • #4280 = factory; #4281 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = EFI Fiery Print Controller (EB-1357)

(#4932/#4933) Data Overwrite Security Unit Type H The Data Overwrite

Security Unit overwrites data that is temporarily stored on the hard drive by writing over the latent image with the following:
  • First pass: Overwrite with random data, 1's and 0's
  • Second pass: Overwrite again with random data, 1's and 0's
  • Third pass: Overwrite with null data, all 0's

This three-pass data overwrite operation is designed to reduce risk of anyone trying to access and reconstruct confidential information.

The only way to turn this feature off is by physically removing this feature from the printer.

Configuration rules:

  • #4932 for initial order, 4933 for MES
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = EFI Fiery Print Controller (EB-1357)

(#4936/#4937) Copy Data Security Unit Type F

If a document containing an embedded pattern for unauthorized copy is copied, protected pages are grayed out in the copy by the copy data security unit. Without this optional unit, the embedded pattern becomes conspicuous in the copy, showing that the copy is unauthorized. The RPCS printer driver enables the data security pattern for printing documents with the embedded pattern of hidden text regardless of the presence of the copy data security unit.

Configuration rules:

  • #4936 = factory, #4937 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = EFI Fiery Print Controller (EB-1357)

(#5012/#5013) External HDD Security Kit

Configuration rules:

  • #5012 = factory, #5013 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = EFI Fiery Print Controller (EB-1357)
  • Compatibility conflicts = Integrated Print Controller

(#4938/#4939) File Format Converter

It provides the capability to download documents from the Document Server (hard drive) stored by copier and printer functions. Without this feature, only scan data can be downloaded.

Configuration rules:

  • #4938 = factory, #4939 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = None

(#4926/#4927) PostScript 3 Unit Type 1357 - NA

(#4958/#4959) PostScript 3 Unit Type 1357 - EU

(#4960/#4961) PostScript 3 Unit Type 1357 - AP It provides support

for the PostScript 3 data stream.

Configuration rules:

  • #4926 = factory; #4927 = field
  • Minimum required = 0
  • Maximum = 1
  • Prerequisite = None
  • Corequisite = None
  • Compatibility conflicts = EFI Fiery Print Controller (EB-1357) (#5000/5001/5010/5011)

(#4934/#4935) HDD Encryption Unit Type A It can encrypt HDD data to

prevent data theft.

Configuration rules:

  • #4934 = factory, #4935 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = None
  • Corequisite = Integrated Print Controller
  • Compatibility conflicts = EFI Fiery Print Controller (EB-1357)

(#5004/#5005) EFI Compose, Fiery Edition

It is an impositioning software utility which includes software application CD and activation dongle.

EFI Compose is an operator-centered tool to support complete digital document composition and job setup. It has the ability to manage, review, manipulate, and execute wide-ranging "make-ready" operations on digital document. Compose can also handle last-minute changes and additions without interrupting document production flow. The example usage includes jobs, which require sophisticated finishing such as books, manuals, and variable data applications.

EFI Compose provides customers with an advanced preview and editing environment in which they can work with WYSIWYG interface for all jobs on the Fiery including pre-and post-processed jobs. Advanced interface becomes an advantage especially when less experienced operators perform complex document functions as they can easily navigate themselves though thumbnail previews. In addition, EFI Compose launches from EFI Command Workstation, which means that it is flexible enough to run on the user's desktop or locally at the Fiery.

Compose applies graphical job interface to improve productivity. Customers can easily navigate themselves on WYSIWYG interface, which includes variety of options such as

  • Thumbnail preview of paper/finishing options.
  • Media color
  • Duplex method
  • Page ranges.

Using visual cues for creating documents and page-level attributes will not only enhance the productivity, but also helps to reduce spoilage as customer can use visual rendering of job for verification.

Configuration rules:

  • #5004 = factory, #5005 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = EFI Fiery Print controller (EB-1357) (#5000/5001/5010/5011)
  • Corequisite = None
  • Compatibility conflicts = None

(#5002/#5003) EFI Impose Software

It is an image editing software utility which includes software application CD and activation dongle.

The EFI Impose feature is designed to create unlimited customer- definable templates, as well as edit and assemble entire documents on a Fiery server before RIP-ping the files for final output. With EFI Impose option, customers can obtain more flexibility and higher speed for complex finishing requirements like books, manuals, business cards, and especially Variable Data applications. By arranging the pages in the correct order and orientation for printing and selecting from variety of binding styles, users can easily make books or booklets.

Configuration rules:

  • #5002 = factory, #5003 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = EFI Fiery Print controller (EB-1357) (#5000/5001/5010/5011)
  • Corequisite = None
  • Compatibility conflicts = None

(#5006/#5007) EFI FACI Furniture Bundle It includes LCD monitor,

keyboard, mouse, FACI dongle, and furniture stand for the purpose of controlling Fiery jobs via monitor.

Configuration rules:

  • #5006 = factory, #5007 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = EFI Fiery Print controller (EB-1357) (#5000/5001/5010/5011)
  • Corequisite = None
  • Compatibility conflicts = None

(#5008/#5009) EFI FACI Enabler

This includes the FACI dongle only. This is for the customer that wants to connect their own LCD monitor, keyboard, and mouse.

Configuration rules:

  • #5006 = factory, #5007 = field
  • Minimum required = 0
  • Maximum allowed = 1
  • Prerequisite = EFI Fiery Print controller (EB-1357) (#5000/5001/5010/5011)
  • Corequisite = None
  • Compatibility conflicts = None

Other finishing options

The InfoPrint Pro 907EX, 1107EX, and 1357EX support the InfoPrint 2494 Ring Binder and InfoPrint 2492 Perfect Binding Unit.

The InfoPrint 2494 Ring Binder automates the entire binding process so operators can prepare incoming jobs while additional jobs are being ring bound. It provides fully automated in-line ring binding to increase productivity. It includes:

  • Binding capacity of up to 100 sheets (200 duplex pages)
  • Booklet size: A4, 8.5 x 11 in.
  • Punch/stack paper weight: up to 216 gsm

The InfoPrint 2494 Perfect Binding Unit trims up to three sides of collated pages and applies perfect binding without operator intervention to reduce labor costs. It provides:

  • Professional quality booklets with glue binding unit
  • Binding capacity of up to 200 sheets (400 duplex pages)
  • Cover page insertion
  • Three-edge or one-edge trimming
  • Wide variety of booklet sizes

Both the InfoPrint 2494 Ring Binder and InfoPrint 2492 Perfect Binding Unit must be ordered separately. They are not features of the InfoPrint Pro 907EX, 1107EX, and 1357EX.

Software support

For IPDS printing, InfoPrint Pro 907/907EX, 1107/1107EX, and 1357/1357EX Printer Family require one of the host licensed Print Services (PSF) products shown below. Each software environment has specific operating system and AFP program requirements. For a list of the programs that are required for a particular environment, refer to the Planning Guide.

AFP Licensed Program Ethernet TCP/IP
----------------------------------------------------- ---------------
OS/400 V5.1 and above Yes
Graphical Data Display Manager (GDDM) V2.3 and above Yes
PSF for z/OS V4.1.0 and above Yes
PSF for VM V2.1.1 and above Yes
PSF for VSE V2.2.1 and above Yes
PSF for i5/OS and OS/400 V5.2 and above Yes
InfoPrint Manager for AIX V4.2 and above Yes
InfoPrint Manager for Windows V2.2 and above Yes
InfoPrint ProcessDirector for Linux V1.3.1 and above Yes
InfoPrint ProcessDirector for AIX V1.3.1 and above Yes


AFP/IPDS

For AFP/IPDS functions supported, refer to the Planning Guide.

PCL and PostScript

For PCL and PostScript fonts supported, refer to the Planning Guide.


Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

InfoPrint is a trademark of InfoPrint Solutions Company LLC in the United States, other countries, or both.
IBM Corporation 2009.