IBM Infoprint 1764 MFP Color 4899
Shown with full configuration.
New
4899-001 39V2095 (New)
Fully refurbished with 90-day warranty
4899-001 39V2095
The IBM 4899 InfoPrint Color 1764 MFP is an all-in-one multifunction printer (MFP) that provides color print, copy, scan, and fax functions. InfoPrint Color 1764 MFP is designed to keep up with the demands of large workgroups and can produce up to 40 page-per-minute (ppm)(1) letter size for monochrome; and up to 35 ppm(1) letter size for color.
Note: (1) Exact print speed varies depending on document complexity, system configuration, software Applications, driver, and printer status.
39V2313 | 39V2313 IP 1654/1664/1754/1764 Fuser Unit New 39V2313 (New) Retired, no longer available: Contact for alternatives |
39V2318 | |
Black Return Program 39V0931 6,000 impressions | |
Cyan Return Program 39V0932 6,000 impressions | |
Magenta Return Program 39V0933 6,000 impressions | |
Yellow Return Program 39V0934 6,000 impressions | |
Black High Yield Return Program 39V0935 10,000 impressions | 39V0923 39V0931 39V0935 IBM InfoPrint Color 1654 1664 Series Black Toner Cartridge New 39V0923 39V0931 39V0935 10K Yield Compatible (New) $179.00 |
Cyan High Yield Return Program 39V0936 10,000 impressions | 39V0924 39V0932 39V0936 IBM InfoPrint Color 1654 1664 Series Cyan Toner Cartridge New 39V0924 39V0932 39V0936 10K Yield Compatible (New) $199.00 |
Magenta High Yield Return Program 39V0937 10,000 impressions | 39V0937 IBM Return Program High Yield Toner Cartridge Magenta New 39V0937 10K Page Yield (New) $342.00 39V0925 39V0933 39V0937 IBM InfoPrint Color 1654 1664 Series Magenta Toner Cartridge New 39V0925 39V0933 39V0937 10K Yield Compatible (New) $199.00 |
Yellow High Yield Return Program 39V0938 10,000 impressions | 39V0926 39V0934 39V0938 IBM InfoPrint Color 1654 1664 Series Yellow Toner Cartridge New 39V0926 39V0934 39V0938 10K Yield Compatible (New) |
39V1498 500-Sheet Drawer | |
39V1499 500-Sheet Tray | |
39V1501 2000-Sheet Drawer | |
39V1502 Envelope Drawer | |
39V1503 Output Expander | |
39V1504 5-Bin Mailbox | |
39V1505 Banner Tray | |
39V1507 StapleSmart Finisher | |
75P6986 128 MB Memory DIMM | |
75P6987 256 MB Memory DIMM | |
75P6988 512 MB Memory DIMM | 75P6988 Infoprint Brand 512 MB DIMM New 75P6988 (New) Retired, no longer available: Contact for alternatives |
75P6989 32 MB Flash Memory | |
75P6990 64 MB Flash Memory | |
39V2310 Card for IPDS and SCS/TNe | |
39V2311 Bar Code Card | |
39V1524 Ethernet 10/100BaseTX (1 USB port) | |
39V1525 Ethernet 1000BaseTX (4 USB port) | |
39V1526 Ethernet 10/100BaseTX (1 parallel port) | |
75P6854 802.11g Wireless to USB | |
75P7030 2-meter USB Cable |
Model Abstract 4899-001
The IBM 4899 InfoPrint Color 1764 MFP Model 001 is an all-in-one multifunction printer (MFP) that provides print, copy, scan, and fax functions, with standard memory of 384 MB, maximum memory of 768 MB, an 800 MHz processor, hard drive, and modem.
Highlights
Key functions of InfoPrint Color 1764 MFP include:
- More vivid display
- Intuitive job cancel
- Scan preview
- Custom Job (Job build) from ADF and/or flatbed
- Priority copies
- Copy countdown
- ADF supports mixed letter/legal
- Legal-size flat bed
- Print from/scan to flash drive
- Fax redirect
- Network Twain Driver
- Hard drive encryption and "wiping"
- Print spooling (job buffering)
- Copy spooling
- E-mail spooling/queuing
- Fonts and macro storage
- MFP lockout
- Booklet creation in copy mode
Description |
IBM InfoPrint Color 1764 MFP is an all-in-one multifunction printer (MFP) that provides print, copy, scan, and fax functions. The table below summarizes the models:
Standard Maximum Hard
Models memory memory Ethernet USB Port Processor drive Modem
-------- -------- ------- -------- -------- --------- ----- -----
001, 002 768 MB 768 MB Standard Standard 800 MHz Yes Yes
In addition to one 500-sheet built-in drawer, the printer includes two more 500-sheet drawers and a 100-sheet multipurpose feeder for a total input capacity of 1,600-sheets standard. Output capacity for all models is 250 sheets. Duplex is standard.
Memory
All models include 256 MB of SDRAM in the printer and 512 MB in the MFP for a maximum of 768 MB of memory. All models have one slot for flash memory. One 32 MB or 64 MB flash memory option is supported. One slot is available for application solution features such as IPDS or bar code.
A hard drive (40 GB+) comes standard on the InfoPrint Color 1764 MFP.
Network connections
Fast Ethernet is standard on all models.
Usage rates
The maximum monthly usage for printing is 120,000 impressions. IBM does not recommend printing to these monthly maximums on a consistent basis.
Print quality
The resolution of InfoPrint Color 1764 MFP is:
- 4800CQ (default full printer speed)
- 1200 x 1200 dpi (reduced printer speed)
InfoPrint Color 1764 MFP has five toner darkness levels for color and monochrome. The printer ships with printer darkness set at level 4. When printing in color, level 5 is equal to level 4.
The "Toner Darkness" menu is available through the operator panel under the Quality menu and also accessible through the PostScript or PCL driver.
Font support
The printer's resident fonts include support for the following:
Emulation Number of scalable fonts Number of bitmapped fonts
------------ ------------------------ -------------------------
PCL 6 89 2
PostScript 3 158 0
Operator panel
The InfoPrint Color 1764 MFP operator panel has:
- Touch-sensitive GUI plus 17 "hard" buttons and one LED
- Color LCD (TFT) with backlight
- 8.0-inch display
- Expanded language support
MFP
Scanner
----------------------- --------------------------------------------
Scanner Type Color/Mono Flatbed Scanner with ADF
Scan Technology Charge Coupled Device (CCD)
Light Source Cold Cathode Fluorescent Lamp (CCFL)
Number of Light Sources One per CD module
Max Optical Resolution 600 x 600 dpi (Mono)
- Flatbed 600 x 300 dpi (Color), with final resolution
of 300 x 300 dpi
Scan Area - Flatbed Max. 8.5 x 14 in (216 x 355.6 mm)
Scanner ADF
---------------------- --------------------------------------------
ADF Type Single pass duplex ADF with C-Path
Optical Resolution ADF Max. 600 x 600 dpi
(Mono)
Optical Resolution ADF Max. 600 x 300 dpi (final resolution 300 x
(Color) 300 dpi
Document Capacity 50 Sheets 20 lb. (75 g/m2) Bond
Media Depth (Thickness) Max. .15 mm
Min. .05 mm
Media Weight Max. 32 lb (120 g/m2)
Min. 14 lb (52 g/m2)
Scan Area - ADF Max. 8.5 x 14.0 in (216 x 355 mm)
Min. 4.5 x 5.5 in (114.3 x 139.7 mm)
Fax
----- ------------------------------------------
Modem Built-in Group 3 compatible, Full Function
Fax 33,600 bps, Max V.34 Half Duplex
IPDS Function
IPDS function supports these Object container objects:
- TrueType Fonts
- TrueType Fonts Collection
- JPEG (JFIF) Objects
- IOCA Tile Objects
Font linking is supported with TrueType fonts. Font collections are not fully supported on these printers. Only characters located in the first 64K area of unicode range are supported.
Telecommunications approval
This product may connect to a Public Telecommunications Network, as such by country regulations and laws this product may require Telecommunications Approval through country Telecommunications Authority prior to sale.
Features
InfoPrint Color 1764 MFP supports the following features:
Part
Number Description
------- ------------------------------
39V1498 500-Sheet Drawer
39V1499 500-Sheet Tray
39V1501 2000-Sheet Drawer
39V1502 Envelope Drawer
39V1503 Output Expander
39V1504 5-Bin Mailbox
39V1505 Banner Tray
39V1507 StapleSmart Finisher
75P6986 128 MB Memory DIMM
75P6987 256 MB Memory DIMM
75P6988 512 MB Memory DIMM
75P6989 32 MB Flash Memory
75P6990 64 MB Flash Memory
39V2310 Card for IPDS and SCS/TNe
39V2311 Bar Code Card
39V1524 Ethernet 10/100BaseTX (1 USB port)
39V1525 Ethernet 1000BaseTX (4 USB port)
39V1526 Ethernet 10/100BaseTX (1 parallel port)
75P6854 802.11g Wireless to USB
75P7030 2-meter USB Cable
Accessibility by people with disabilities
For hardware offerings
The following features support use by people with disabilities:
- Controls and latches are operable with one hand and minimal dexterity.
- Keys are discernible by touch without activating them.
- The display, controls, latches, and levers are accessible to someone in a wheel chair.
- Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.
Model Summary Matrix
Model | Standard Memory | Maximum Memory | Ethernet | USB Port | Processor | Hard Drive | Modem |
---|---|---|---|---|---|---|---|
00x | 384 MB | 768 MB | Standard | Standard | 800 MHz | Yes | Yes |
Customer Setup (CSU)
All products in this announcement are customer setup.
Devices Supported
Not applicable.
Model Conversions
Not available.
Printer Data StreamsThe InfoPrint Color 1764 MFP supports the following data streams:
- PostScript 3 Emulation
- Hewlett-Packard Company PCL 6 Emulation
- PPDS Migration Tool
- PDF v1.5 emulation
Font support
The InfoPrint Color 1764 MFP resident fonts include support for following:
Emulation Number of Scalable Fonts Number of Bitmapped Fonts
------------ ------------------------ -------------------------
PCL 6 89 2
PostScript 3 158 0
PPDS 39 5
Fonts and Symbol Sets
The fonts in the PCL emulation are compatible with the fonts in the HP LaserJet 4550 and include nine additional fonts and many extra symbol sets to support extra languages and applications. Included in the PCL emulation are OCR-A, OCR-B and Code 3 of 9 barcode fonts. The fonts in the PostScript emulation are compatible with all 136 fonts in Adobe PostScript 3 and include 22 additional fonts.
Additional fonts can be downloaded to the MFP RAM, hard drive, or optional user flash card.
Included on the CD-ROM shipped with the MFP are screen fonts to match the MFP's resident scalable fonts. This CD also includes a variety of downloadable fonts for Hebrew and Arabic.
Support for the euro currency character is included in all applicable fonts for both the PostScript and PCL emulations. Twelve of the PCL symbol sets support the euro character including all seven Windows symbol sets.
The MFP supports Unicode printing with special UTF-8 encodings in both the PCL and PostScript emulations. UTF-8 encoding is a particular way to access characters that is very useful for fonts with large character sets. UTF-8 is used by our SAP printing solution.
Maximum Print Speed and Performance
The InfoPrint Color 1764 MFP supports the maximum print speeds listed below. Actual performance depends on:
- Interface to host (parallel, serial, USB or network)
- Host system and application
- Complexity and content of the page
- Certain options added to or selected with the MFP
- Available memory in the MFP
- Media size, media type and tray source
- Print Resolution
The table below specifies throughput based on resolution and media size. For a complete range of media sizes supported, see Media Supported.
Media Size Tray 1 Monochrome Printing
(ppm simplex, spm duplex) 4800CQ 1200 dpi
----------------------------------- ---------- ----------
Full-sized media, full rated engine speed
Letter (8.5" x 11.0"] 40.0 15.0
A4 (8.3" x 11.7"] 38.0 14.0
Legal (8.5 x 14.0) 35.0 12.0
Full-sized media, less than full rated engine speed
Transparency (8.5" x 11.0"] 15.0 15.0
Cardstock (8.5" x 11.0"] 15.0 15.0
Labels (8.5" x 11.0"] 15.0 15.0
Smaller sizes, reduced throughput(1)
Nearly Narrow (more than 6.8" but 20.0 7.5
(i.e. B5/Exec) than 8.3" wide)
Nearly Media(2) (less than 6.8" wide) 13.3 5.0
(i.e. A5)
Duplex (Ltr) 40.0 15.0
Media Size Tray 1 Color Printing
(ppm simplex, spm duplex) 4800CQ 1200 dpi
----------------------------------- ---------- ----------
Full-sized media, full rated engine speed
Letter (8.5" x 11.0"] 35.0 15.0
A4 (8.3" x 11.7"] 33.0 14.0
Legal (8.5 x 14.0) 28.0 12.0
Full-sized media, less than full rated engine speed
Transparency (8.5" x 11.0"] 15.0 15.0
Cardstock (8.5" x 11.0"] 15.0 15.0
Labels (8.5" x 11.0"] 15.0 15.0
Smaller sizes, reduced throughput(1)
Nearly Narrow (more than 6.8" but 17.5 7.5
(i.e. B5/Exec) than 8.3" wide)
Nearly Media(2) (less than 6.8" wide) 11.6 5.0
(i.e. A5)
Duplex (Ltr) 35.0 15.0
Note: (1) The first 25 narrows pages print at rated engine speed; subsequent pages print at the speed shown.
Note: (2) Once the printer enters a reduced throughput mode as indicated, the printer remains at the given speed after the last sheet of non-full-size media until the fuser returns to standby temp.
The table below specifies first print time objectives:
First Print Time from Standby(1)(2) Mono <11.0 sec.
Color <13.0 sec.
First Print Time from Power Saver(1)(2) Mono <75.0 sec.
Color <75.0 sec.
Note: (1) All first print times are measured for 4800CQ simplex printing on letter sized paper. The test job consists of a single page of simple text (approximately 20% coverage). The First print time is defined as the elapsed time from hitting enter on the PC keyboard to the page exiting to the output bin. All tests will pick paper from the default primary input tray and the page will exit into the default primary output bin.
Note: (2) Times may be longer if an automatic calibration is required.
Print Quality
General Statement on Print Quality
During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure high quality printing and good performance throughout the life of the printer.
Customer-replaceable maintenance items are recommended every 120,000 pages for the fuser and 120,000 pages for the ITU.
Automatic Calibration
The InfoPrint Color 1764 MFP performs an automatic calibration under the following conditions:
- At power on,
- After 8 hours of Power Saver,
- Every 500 pages,
- After changing a print cartridge, or
- After changing an intermediate transfer unit.
Note: A manual calibration can be initiated by selecting Settings Menu, Quality Menu, "Color Adjust".
Print Quality Settings
- 4800CQ (default) (full printer speed)
- 1200 x 1200 dpi (reduced printer speed)
Color and Black & White Printer Controls
The InfoPrint Color 1764 MFP will offer several controls that will allow the user or Printer / Network Administrators to direct the preferred output to be Color or Black & White.
Driver
A choice to print a color job in black & white is available in InfoPrint Color 1764 MFP Drivers. Note that the drivers for InfoPrint Color 1764 MFP are branded InfoPrint Color 1764. Printing jobs in color is the default setting.
InfoPrint Color 1764 MFP will offer a Black only driver (Windows NT 4.0, XP, 2000, Windows Server 2003) that will allow Printer / Network Administrators to limit the printing from some workstations to black and white only.
Op Panel
Print Mode
Allows users not utilizing an InfoPrint Color 1764 MFP Driver to print a color job in black & white by selecting Black & White from the menu. The selections are Color (default setting) and Black & White. "Print Mode" is located under the Color Menu. These Op panel selections are ignored when using an InfoPrint Color 1764 MFP Driver for Windows.
Printer Usage
Printer Usage modes are set to control the starting position of the Intermediate Transfer Unit (ITU) and how the printer software controls its position depending on the color content of the print job and/or the InfoPrint Color 1764 MFP Driver or "Print Mode" selection. There are two selections: Max Speed and Max Yield (default setting). "Printer Usage" is located under the Settings Menu then Setup Menu.
Processing a significant number of black pages with the ITU engaged may reduce the life of the color photoconductors and may affect the ultimate life of the color print cartridges (the photoconductor is an integral part of the cartridge).
Maximum print speed is obtained when the Driver and Print Mode are set to color (default settings) and Printer Usage is set to Max Speed. Any other selections can reduce throughput depending on the job content and the selection. It takes approximately one second to lower the ITU and approximately six seconds to raise it. The following table summarizes the effect of selections on the ITU movement.
"Printer Usage" Driver or "Print ITU Initial
Selection Mode" Selection Position ITU Movements
--------------- ---------------- --------------- --------------------
Max Speed Color Raised/engaged Stays Raised
Black only Position at the Lowers if 3
end of last job consecutive black
Raised/engaged pages are in the
after power on queue OR if the
current page and at
least the last 2
pages were black
Max Yield Color Position at the Lowers if 3
end of last job consecutive black
Raised/engaged pages are in the
after power on queue OR if the
Black only Position at the current page and at
end of last job least the last 2
Raised/engaged pages were black
after power on
Black & White Lock
This feature allows Printer/Network Administrators to "lock" the InfoPrint Color 1764 MFP in a mode that will only print black & white with the ITU disengaged. This feature can not be overridden with any other menu or driver selection. "Black and White Lock" is located under the Setup Menu.
Print Permissions
Print Permissions allows customers to configure the InfoPrint Color 1764 MFP to only print color for certain approved network user IDs. MarkVision will host a utility that allows IT administrators to enter user ID exceptions to normal printing function. User ID specific permissions are entered and stored in the printer. They can be updated at any time and as many times as customers wish. The list is limited to 100 user IDs per printer. The list is intended to be an exceptions list. (i.e. if normal use allows color printing for most people the list can be used to exclude certain users from color printing).
Conversely, normal usage could be no color printing and the list is used to allow color printing for select users who have demonstrated a business need to print color.
Toner Darkness Settings
InfoPrint Color 1764 MFP will have 5 Toner Darkness levels for color and mono. The printer will ship with Printer Darkness set at 4. When printing in color, level 5 is equal to level 4.
The Toner Darkness menu is available through the operator panel under the Print Quality menu and also accessible through the IBM PostScript or PCL Driver.
Color Correction Settings
The InfoPrint Color 1764 MFP will offer the following color correction settings:
Auto (default)
Applies different color correction to each object on the printed page depending upon the type of object and how the color for each object is specified.
Off
No color correction is implemented.
Manual
Allows users to customize color correction output from the Op Panel.
"Auto/default" Color Correction Setting
Incoming Color Format Color Correction Output
--------------------- -----------------------
RGB Graphics sRGB Vivid
RGB Image sRGB Display
RGB Text sRGB Vivid
CMYK Graphics US CMYK
CMYK Image US CMYK
CMYK Text US CMYK
"Manual" Color Correction Output Op Panel Selections
Incoming Color Correction Output Selections
Color Format Color Correction Output Selections
------------ ------------------------------------------------------------
RGB Graphics sRGB Vivid(2), Vivid, sRGB Display, Display-True blk-RGB Off
RGB Image sRGB Vivid, Vivid,sRGB Display (2), Display-True blk RGB Off
RGB Text sRGB Vivid(2), Vivid, sRGB Display, Display-True blk RGB Off
CMYK US CMYK(1), Vivid CMYK, CMYK Off, Euro CMYK(1)
Note: (1) US CMYK is default for low volt printers, Euro CMYK is default for high volt printers.
Note: (2) Default settings.
"Manual" Color Correction Output Selection Definitions
Vivid
Applies a color correction algorithm that produces brighter, more saturated colors. May be selected for all incoming color formats.
sRGB Display
Applies color correction to produce output that approximates the colors displayed on a computer monitor.
sRGB Vivid
Increased color saturation for the sRGB Display color correction.
Display - True Black
Applies color conversion table to produce output that approximates the colors displayed on a computer monitor using only black toner for neutral gray colors.
RGB Off
No color correction is implemented.
US CMYK
Applies color correction to approximate SWOP color output.
Vivid CMYK
Increased color saturation for the US CMYK color correction.
CMYK Off
No color correction is implemented.
Euro CMYK
Applies color correction to approximate EuroScale color output.
Color Balance Control
The InfoPrint Color 1764 MFP will offer a Color Balance Control. It is a color correction option that allows the user to increase or decrease the amount of toner going to the page individually for the cyan, magenta, yellow and black color planes. The scale for the adjustments is +5 to -5.
Color Saver Mode
The InfoPrint Color 1764 MFP will offer a Color Saver Mode that allows end users to print images and graphics lighter. Text will print at Toner Darkness "4", while images and graphics print at Toner Darkness "1". The Color Saver Mode is located on the Op panel under the Color Menu and may be selected from the IBM Custom PostScript or PCL Driver.
Enhance Fine Lines
In this feature, setting this option to ON has the effect of more faithfully representing fine detail in jobs, such as fine lines in CAD drawings. The default is OFF.
Coverage Estimator
The Coverage Estimator is designed to give the user an approximation of percent coverage per color when printing a composite color document. The estimation of coverage can be used to calculate an approximate cost of any given document if yield and coverage are assumed to be linear and inversely related. This tool should allow customers to discover for themselves that printing color documents on color laser printers is frequently an economical way to create these documents. Furthermore, they can discover that many black and white documents can be improved for a nominal increase in cost.
The Coverage Estimator allows end users to estimate the percent coverage of cyan, magenta, yellow and black on a page. The estimates will be printed on the page. The Coverage Estimator is available from the Op Panel under the Settings Menu and then the Utilities Menu.
The Coverage Estimator is intended to only estimate the coverage on a given page. For all toner colors that are used, the minimum percentage reported will be two percent. Reported values may vary from printer to printer. The accuracy of the estimates may be affected by the fullness of the print cartridges, environmental conditions, media type, application, application settings, driver, driver settings, and the content of the page. IBM makes no claim as to the accuracy of the estimated percents.
Color Samples
To assist users in selecting the colors to be printed, they can print color sample pages for each of the RGB and CMYK color conversion tables used in the printer. The color sample pages consist of a series of colored boxes along with the RGB and CMYK combination that creates the color observed for each particular box. These pages can be useful in helping users decide which RGB or CMYK combinations to use in their software applications to create the desired printed color output.
Copy Specific Specifications
Detailed first copy out times:
Monochrome:
Input Mode Size Copy Start State Copy Time(1)
--------- ---------------------- ------ ---------------- ------------
ADF(1) Text or Text/Photo Letter StandBy/Ready 13.210 sec.
ADF(1) Text or Text/Photo A4 StandBy/Ready 13.411 sec.
Flatbed Text or Text/Photo Letter StandBy/Ready 14.367 sec.
Flatbed Text or Text/Photo A4 StandBy/Ready 14.632 sec.
ADF Photo or Printed Image Letter StandBy/Ready 14.290 sec.
ADF Photo or Printed Image A4 StandBy/Ready 14.317 sec.
Flatbed Photo or Printed Image Letter StandBy/Ready 14.518 sec.
Flatbed Photo or Printed Image A4 StandBy/Ready 15.067 sec.
ADF(1) Text/Mixed Letter PowerSaver 61.684 sec.
ADF(1) Text/Mixed A4 PowerSaver 64.672 sec.
Flatbed Text/Mixed Letter PowerSaver 65.409 sec.
Flatbed Text/Mixed A4 PowerSaver 63.195 sec.
ADF Photo or Printed Image Letter PowerSaver 62.909 sec.
ADF Photo or Printed Image A4 PowerSaver 62.615 sec.
Flatbed Photo or Printed Image Letter PowerSaver 62.894 sec.
Flatbed Photo or Printed Image A4 PowerSaver 63.865 sec.
Note: (1) Loading paper in the ADF or Flatbed or touching the M40 MFP Option display will activate warm-up of the MFP and could lower this time to first copy.
Detailed first copy out times for color
Input Mode Size Copy Start State Copy Time(1)
--------- ---------------------- ------ ---------------- ------------
ADF(1) Text or Text/Photo Letter StandBy/Ready 16.894 sec.
ADF(1) Text or Text/Photo A4 StandBy/Ready 17.794 sec.
Flatbed Text or Text/Photo Letter StandBy/Ready 16.587 sec.
Flatbed Text or Text/Photo A4 StandBy/Ready 16.737 sec.
ADF Photo or Printed Image Letter StandBy/Ready 28.301 sec.
ADF Photo or Printed Image A4 StandBy/Ready 29.469 sec.
Flatbed Photo or Printed Image Letter StandBy/Ready 26.705 sec.
Flatbed Photo or Printed Image A4 StandBy/Ready 26.965 sec.
ADF(1) Text or Text/Photo Letter PowerSaver 66.997 sec.
ADF(1) Text or Text/Photo A4 PowerSaver 67.739 sec.
Flatbed Text or Text/Photo Letter PowerSaver 65.397 sec.
Flatbed Text or Text/Photo A4 PowerSaver 63.998 sec.
ADF Photo or Printed Image Letter PowerSaver 84.837 sec.
ADF Photo or Printed Image A4 PowerSaver 85.496 sec.
Flatbed Photo or Printed Image Letter PowerSaver 76.434 sec.
Flatbed Photo or Printed Image A4 PowerSaver 78.766 sec.
Note: (1) Loading paper in the ADF or Flatbed or touching the M40 MFP Option display will activate warm-up of the MFP and could lower this time to first copy.
Copy Features/Functions
- Copy Resolution:
- Copy Output Resolution is 600 X 600dpi.
- Copy Collation:
- Copy collation function is available on the InfoPrint Color 1764 MFP
- Paper Save Functions (N-Up):
- 2 Up Portrait
- 2 Up Landscape
- 4 Up Portrait
- 4 Up Landscape
- Reduced/Enlarge function 25% to 400%
- Maximum Number of Copies:
- 999
- Support for mixed letter/legal
- Custom build (job build) from ADF and/or flatbed
Fax Specific Specifications
Fax Performance
The following table summarizes performance numbers for the InfoPrint Color 1764 MFP.
InfoPrint Color 1764 MFP Performance
-------------------------------------- --------------------------------
(1) Fax Send Transmission Speed - 12KB 3 spp (seconds per page)
(96K Bits) at 33.6KBS
Fax Storage
Total hard drive space (40 GB)
Less 1 GB or a total of 4,096
fax jobs(2)
Maximum Group Speed Dials Base on the number of digits in
each raw or group speed dial - no
exact limit
Fax ReDirect E-mail Address Storage 512 characters
Note: (1) Based on ITU-T Test Chart #1 - Text Format Business Letter.
Note: (2) All faxes are stored on hard drive memory as described.
Fax and Telecom Compatibility Information
FAX Compatibility
-Line Connection PSTN or Analog PABX (RJ-11)
-ITU Compatibility Group 3 / ECM
Standard Resolution 200x100 (Send) 200x100, 204x98 (Receive)
Fine Resolution 200x200 (Send) 200x200, 204x196 (Receive)
SuperFine Resolution 300x300 (Send) 300x300, 204x391 (Receive)
UltraFine Resolution 400x400 (Send) 400x400, 408x391 (Receive)
-Modem
Speed - Standard Max is 33,600 bps, V.34
Half-Duplex
Error Correction Method ITU T.30
Automatic Train Down Yes
-Hand Set No
-Communications
The modem satisfies the require-
ments specified in ITU-T (CCITT)
recommendations V.34 half-duplex,
V.17, V.33, V.29, V.27 ter, V.21
and meets the binary signaling
requirements of V.8 and T.30 with
annex F.
Protocol: ITU T.30
Modulation Type: ITU V.34, V.17, V.29,
V.27ter
Tonal Signal: ITU V.8, V.21 T.30
Data Compression/Compression Memory T.4 1D Modified Huffman
Encoding
T.4 2D Modified Read
Encoding
T.6 Modified Read
Encoding
Modem Speeds: 33600, 31200, 28800,
26400, 21600, 19200,
16800, 14400, 12000,
9600, 7200, 4800, 2400bps
Receive Level: -9dBm ~ -43 dBm
Output Level: Adjustable: -9dBm~-15dBm
Initial Setting: Country Dependent
Line Interface Section
-Modular Plug: RJ-11C
OutBand Signal Level: Guaranteed North American
standard and Europe PTT
-Insulation
Resistance
(250VDC)
Tip - Ring: Higher than 5 Meg Ohms
Tip - Ring-GND Higher than 5 Meg Ohms
Ring Detection: Complies with all
regulatory requirements
Dialing Characteristics
-Dial Pulse
Not Supported
1) DTMF
Coding Format
1209 Hz 1336 Hz 1477 Hz
697 Hz 1 2 3
770 Hz 4 5 6
852 Hz 7 8 9
941 Hz - 0 #
Retry No Answer 1 Additional Retry
(also if not a fax at the far end)
Busy 0 to 9 Additional Tries
(user programmable, factory default is 5)
Frequency 1 to 200 minutes
(user programmable, factory default is 3 minutes)
Fax Features
- Block Junk Fax Function:
- Block Junk Fax Function = Yes.
- Blocks junk faxes based on caller ID and remote station ID.
- Caller ID Support = Yes
- Fax Forwarding:
- Incoming faxes may be forwarded to another fax machine, e-mail, FTP, or LDSS. In order to fax to LDSS, LDSS is required.
- HalfTone:
- InfoPrint Color 1764 MFP does not support 8-bit grayfax.
- Max Broadcast Locations:
- Maximum Broadcast locations is 400. Note: each number in a group fax is a location.
- Group Fax (Broadcasting):
- Broadcasting is available on the InfoPrint Color 1764 MFP. It can broadcast to 46 locations (based on 10 digit numbers with a max of 512 characters). This function is supported by Speed Dials (shortcuts) and the touch screen menus for Group Fax (Broadcasting).
- Manual Fax:
- Manual Fax capability available on InfoPrint Color 1764 MFP.
- Fax from PC:
- Fax from PC is supported using Postscript driver for both local and network attach modes.
- Fax Shortcuts:
- Maximum characters per shortcut = 500 characters
- Speed Dials:
- The number of SpeedDials/Shortcuts is greater than 5000, based on a 10-digit phone number.
- Fax Preservation:
- Faxes are preserved over POR on the InfoPrint Color 1764 MFP.
- LDAP Lookup:
- LDAP Address Lookup capability on the InfoPrint Color 1764 MFP.
- Support for mixed letter/legal
- Custom job (job build) from ADF and/or flatbed
Scan Specific Specifications
Scan Performance
The following table summarizes performance numbers for the InfoPrint Color 1764 MFP.
Scan Speed
-Sides Per Minute (SPM) (Mono Simplex) Letter - 35
A4 - 33
-Sides Per Minute (SPM) (Color Simplex) Letter - 18
A4 - 17
-Sides Per Minute (SPM) (Mono Duplex) Letter - 31
A4 - 29
-Sides Per Minute (SPM)(Color Duplex) Letter - 16
A4 - 15
Scan Features
- Scan preview
- Job build from flatbed
- Support for mixed letter/legal
- Duplex Scan
- Mono Output Resolution: 600 X 600 dpi (max)
- Color Output Resolution: 300 X 300 dpi (max)
- USB and Network TWAIN Drivers:
- Network TWAIN drivers are available on the InfoPrint Color 1764 MFP
- Destinations:
- FTP
- LDSS
- Network connected PC
- USB flash memory drive (thumb drive)
- File Formats:
- TIFF
- JPG
Security Features
This product contains several standard and optional features and functions that improve or enhance the security of the device. See User Guide for more information.
Available MFP security features
Apply an administrative password to restrict unauthorized users from making changes to the MFP configuration.
Requires user authentication prior to performing sensitive operations such as scan-to-e-mail and scan-to-fax. This process that unauthorized individuals cannot use these functions.
Disable various device capabilities, including Copy, E-mail, FTP, Fax Send, Fax Receive, and Driver to Fax.
Disable all unneeded protocols and network communication paths by which the MFP can be configured.
MFP touch screen lock function
The MFP touch screen lock function disables the MFP functions such as copy and scan-to-email. This helps secure the MFP from unauthorized use when the office is idle or unattended. An administrator must unable the function and set the password for use with the function. Any user may then lock the MFP touch screen or unlock the touch screen using the password.
Setting security using the Embedded Web Server (EWS)
To enhance the security of network communications and MFP configuration, use the advanced security options. These features are available through the Web page of the MFP.
Setting the system password
Setting the system password protects configuration of the Embedded Web Server. A system password is also required for Secure mode and confidential communication with MVP.
Using the secure Embedded Web Server
The SSL (Secure Sockets Layer) allows for secure connections to the Web server within the print device. To connect to the Embedded Web Server more securely, connect to the SSL port instead of the default HTTP port. The SSL port connection will encrypt all Web server network communications between the PC and MFP.
Supporting SNMPv3 (Simple Network Management Protocol version 3)
SNMPv3 protocol allows for encrypted and authenticated network communications. It also lets the administrator select a desired level of security. Prior to use, at least one user name and password must be established from the settings page. To configure for SNMPv3 through the Embedded Web Server of the MFP:
Supporting IPSec (Internal Protocol Security)
IP Security protocol provides authentication and encryption of communications at the network layer allowing all application and network communications over the IP protocol to be secure. IPSec can be set up between the MFP and up to five hosts, using both IPV4 and IPV6.
Disabling ports and protocols
The TCP and UDP ports can be configured to one of three modes or values:
- Disabled - Never allows network connections to this port
- Secure and unsecure - Allows the port to remain open, even in Secure mode
- Unsecured Only - Allows the port to only open when the MFP is not in Secure mode
Using 802.1x Authentication
802.1x port authentication allows the MFP to join networks that require authentication before allowing access. 802.1x port authentication can be used with the WPA (Wi-Fi Protected Access) feature of an optional external wireless print server to provide WPA-Enterprise security support.
Support for 802.1x requires the establishment of credentials for the MFP. THe MFP must be known to the Authentication Server (AS). The AS will allow network access to devices presenting a valid set of credentials which typically involves a name/password combination and possibly a certificate. The AS will allow network access to the MFP presenting a valid set of credentials. The credentials can be managed by using the Embedded Web Server of the MFP.
Locking the operator panel menus
Operator Panel Menu Lockout allows creation of a PIN number and a choice of specific menus to lock. Each time a locked menu is selected, the user is prompted to enter the correct PIN at the operator panel. The PIN does not affect any access through the EWS.
Printing Lockout
Printing Lockout allows locking or unlocking of an MFP using an assigned PIN. When locked, every job the MFP receives will buffer to the hard disk. A user can print jobs only by entering the correct PIN on the operator panel. A PIN can be assigned through the Web page of the MFP.
Note: Back channel data will be processed while the MFP is locked. Reports such as users or event logs can be retrieved from a locked MFP.
Confidential Print Setup
Confidential Print Setup allows the designation of a maximum number of PIN entry attempts and allows setting an expiration time for print jobs. When a user exceeds a specific number of PIN entry attempts, all of the user's print jobs are deleted. When a user has not printed their jobs within a designated time period, the print jobs are deleted.
Encrypting the hard disk
Disk Encryption provides protection of sensitive data stored on internal hard disk drives in the event of unauthorized access to the hardware. When enabled, Disk Encryption uses 128 bit AES encryption to encrypt all data stored on the drive. This feature is disabled by default, and enabled through the Power On Configuration menu. When enabled or disabled, the entire drive is formatted, destroying any references to data that may have been stored previously.
Hard disk wiping
Hard disk wiping performs a multi-purpose overwrite of all sectors on the hard drive, mitigating the potential exposure risks for sensitive information. This feature is performed on a demand basis, and is accessed through the Power On Configuration menu.
Using the restricted server list function
The Restricted Server list lets a system support person restrict which hosts are allowed to communicate with the MFP over the network which prevents other hosts from managing and printing to the MFP.
Note: The Restricted Server List only restricts TCP traffic; it does not affect UDP traffic. The Restricted Server List supports up to ten host addresses or ten network addresses.
Digitally Signed Firmware Update Files
Upgraded firmware files from Lexmark are now signed with a digital signature, which verifies the source and authenticity of the updated code. This prevents a malicious user from creating and uploading to the MFP custom code that could intercept and expose potential confidential data.
Printer Specifications
Print Area
The InfoPrint Color 1764 MFP printable area is limited to within 4.2 mm (0.167 in.) of top, bottom, left or right edges of the media. Any information placed outside this specified printable area will not print.
Media Support
All models come standard with three 500-sheet paper drawers and a 100-sheet multipurpose feeder. One 250-sheet output bin is standard. See tables below for standard and maximum media capacities.
Input Media Capacities (sheets)
Standard Standard Standard Optional Total
MP Tray Drawer 1 Drawer 2 Drawer 3 Drawer 4 Capacity
--------- -------- -------- -------- -------- --------
Standard 100 500 500 500 1600
Maximum with
2000-sheet dwr(1) 100 500 500 2000 3100
Maximum w/o
2000-sheet dwr(1) 100 500 500 500 500 2100
Note: (1) A maximum combination of three optional 500-sheet drawers or a maximum combination of one optional 500-sheet drawer plus one 2,000-sheet drawer is supported on any model. Scanner shelf can only be used in the noted standard configuration.
Output Media Capacities (sheets)
Optional Optional
Standard 5-Bin Output Optional Total
Output Bin Mailbox Expander Finisher Capacity
---------- -------- -------- -------- --------
Standard 250 250
Maximum with
5-Bin Mailbox 250 500 750
Maximum with
Output Expander 250 650 900
Maximum with
Finisher 250 750 1000
Note: A maximum of one 5-Bin Mailbox, Output Expander, or StapleSmart Finisher is supported.
Note: An optional 500-sheet drawer is required when utilizing a 2,000-sheet Drawer and a Duplex Unit. The first option under a duplex unit must be a 500-sheet drawer.
Note: The included scanner shelf cannot be used with any output options other than Standard Output Bin.
Media Sizes Supported
Input Media
500- 2000-
Sheet Sheet Envelope
Paper Size & Type MPF Drawer Drawer Duplex Drawer
------------------------ ---- ------ ------ ------ --------
A4 (210x297 mm) Yes Yes Yes Yes No
Letter (8.5"x11"] Yes Yes Yes Yes No
A5 (148x210 mm) Yes Yes Yes Yes No
B5-JIS (182x257 mm) Yes Yes Yes Yes No
Legal (8.5"x14"] Yes Yes Yes Yes No
Executive (7.25"x10.5"] Yes Yes Yes Yes No
Folio (8.5"x13"] Yes Yes No Yes No
Statement (5.5"x8.5"] Yes Yes No Yes No
7 3/4 Env. (98x191 mm) Yes No No No Yes
9 Env. (98x225 mm) Yes No No No Yes
Commercial #10 Env. Yes No No No Yes
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No No No Yes
B5 Env. (176x250 mm) Yes No No No Yes
DL Env. (110x220 mm) Yes No No No Yes
Other Env.(1) Yes No No No Yes
Universal(2)(6) Yes Yes No Yes No
Universal(3)(6) Yes No No No No
Universal(4)(6) Yes Yes No Yes No
Paper Yes Yes Yes Yes No
Transparencies Yes Yes No No No
Cardstock Yes Yes No Yes No
Paper Labels(5) Yes Yes No Yes No
Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).
Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).
Note: (3) Size 76.2x127mm to 229x355.6mm (3x5 in. to 9.01x14 in.).
Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
Note: (5) Occasional use only.
Note: (6) Narrow media should be loaded with the length in the feed direction (portrait).
Output Media
Staple Staple
Std Smart Smart
Out. 5-bin Output Output Staple/
Paper Size & Type Bin Mailbox Expand Bin Jogger
----------------------- ---- ------- ------ ------ -------
A4 (210x297 mm) Yes Yes Yes Yes Yes
Letter (8.5"x11"] Yes Yes Yes Yes Yes
A5 (148x210 mm) Yes No Yes No No
B5-JIS (182x257 mm) Yes Yes Yes Yes No
Legal (8.5"x14"] Yes Yes Yes Yes Yes
Executive (7.25"x10.5"] Yes Yes Yes Yes No
Folio (8.5"x13"] Yes Yes Yes Yes Yes
Statement (5.5"x8.5"] Yes No Yes No No
7 3/4 Env. (98x191 mm) Yes No Yes No No
9 Env. (98x225 mm) Yes No Yes No No
Commercial #10 Env. Yes No Yes No No
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No Yes No No
B5 Env. (176x250 mm) Yes No Yes No No
DL Env. (110x220 mm) Yes No Yes No No
Other Env.(1) Yes No Yes No No
Universal(2)(6) Yes No Yes No No
Universal(3)(6) Yes No No No No
Universal(4)(6) Yes No Yes No No
Paper Yes Yes Yes Yes Yes
Cardstock Yes No Yes Yes No
Transparencies Yes No Yes Yes No
Paper Labels(5) Yes No Yes No No
Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).
Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).
Note: (3) Size 76.2x127mm to 229x355.6mm (3.0x5 in. to 9.01x14 in.).
Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
Note: (5) Occasional use only.
Note: (6) Narrow media should be loaded with the length in the feed direction (portrait).
Media Type and Weights Supported
Input Media
Print Media 500-Sheet Dwr Mult. Feeder 2000-Sht Drawer
------------------ ------------- -------------- ---------------
Copier/Xerographic 60-74.9 gsm 60-74.9 gsm 60-74.9 gsm
(2),(6),(9) grain long grain long grain long
(16-19.9 lb (16-19.6 lb (16-19.9 lb
bond)(2),(6) bond)(2),(6) bond)(2),(6)
Copier/Xerographic 75-119.9 gsm 75-119.9 gsm 75-119.9 gsm
(2),(6),(9) grain long grain long grain long
(20-31.9 lb (20-31.6 lb (20-31.9 lb
bond) bond) bond)
Copier/Xerographic 120-176 gsm 120-176 gsm 120-176 gsm
(2),(6),(9) grain long grain long grain long
(32-47 lb (32-47 lb (32-47 lb
bond)(9) bond)(9) bond)(9)
Specialty Paper 88-176 gsm 88-176 gsm 88-176 gsm
Gloss Book grain long grain long grain long
60-120lb book 60-120lb book 60-120lb book
Specialty Paper 162-176 gsm 162-176 gsm 162-176 gsm
Gloss Cover grain long grain long grain long
60-65lb cover 60-65lb cover 60-65lb cover
Card Stock Upper
Limit grain Long(1)
- Index-Bristol 163 gsm(90lb) 163 gsm(90lb) No
- Tag 163 gsm(100lb) 163 gsm(100lb) No
- Cover 176 gsm(65lb) 176 gsm(65lb) No
Card Stock Upper
Limit grain Short(1)
- Index-Bristol 199 gsm(110lb) 199 gsm(110lb) No
- Tag 203 gsm(125lb) 203 gsm(125lb) No
- Cover 216 gsm(80lb) 216 gsm(80lb) No
Transparencies 170-180 gsm 170-180 gsm No
- Laser printer 45-48 lb 45-48 lb No
Labels Upper Limit(2)
- Paper(7) 180 gsm(48lb) 199 gsm(53lb) No
Integrated Forms
- Pressure Area(3) 140-175 gsm 140-175 gsm No
- Paper Base 75-135 gsm 75-135 gsm No
20-36 lb 20-36 lb
Envelopes(8)(4)(5) No 60-105 gsm No
16-28lb bond
(4),(5)
Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.
Note: (2) Paper less than 75 gsm is limited to simplex only at less than 60% relative humidity and is not supported in duplex. Paper less than 75 gsm must be printed with paper weight set to light.
Note: (3) Pressure sensitive area must enter the printer first.
Note: (4) 100% cotton content maximum weight is 24 lb. bond.
Note: (5) 28 lb bond envelopes are limited to 25% cotton content.
Note: (6) The duplex option supports the same weights and types as the printer except for 16-19.9 lb (60-74.9 gsm) grain long bond, A5, cardstock, transparencies, envelopes, and paper labels.
Note: (7) Occasional use only.
Note: (8) For envelopes, Envelope Drawer has same support as MPF.
Note: (9) Paper 105 to 176 gsm (28 to 47 lb) must be printed with Paper Weight set to heavy.
Output Media
StapleSmart
Standard Bin StapleSmart Finisher
& Output Finisher Offsetting/ 5-bin
Print Media Expander Output Bin Stapling Mailbox
------------------ ------------ -------------- -------------- -----------
Copier/Xerographic 60-74.9 gsm 60-74.9 gsm 60-74.9 gsm 60-74.9 gsm
(2),(6) grain long grain long grain long grain long
16-19.9 lb 16-19.9 lb 16-19.9 lb 16-19.9 lb
bond (2),(6) bond (2),(6) bond (2),(6) bond(2),(6)
Copier/Xerographic 75-176 gsm 75-176 gsm 75-96 gsm 75-90 gsm
(2),(6) grain long grain long grain long grain long
20-47 lb 20-47 lb 20-24 lb 20-24 lb
bond bond bond bond
Gloss Book 88-176 gsm 88-176 gsm No No
grain long grain long
60-120 lb 20-120 lb
book book
Gloss Cover 162-176 gsm 162-176 gsm No No
grain long grain long
60-65 lb 60-65 lb
cover cover
Card Stock Upper
Limit grain Long(1)
- Index-Bristol 163 gsm (90lb) 163 gsm (90lb) No No
- Tag 163 gsm (100lb) 163 gsm 100lb) No No
- Cover 176 gsm (65lb) No No No
Card Stock Upper
Limit grain Short(1)
- Index-Bristol 199 gsm (110lb) 199 gsm (110lb) No No
- Tag 203 gsm (125lb) 203 gsm (125lb) No No
- Cover 216 gsm (80lb) 176 gsm (65lb) No No
Transparencies 170-180 gsm 170-180 gsm No No
45-48 lb 45-48 lb No No
bond bond
Labels Upper Limit
- Paper(7) 180 gsm (48lb) No No No
Integrated Forms
- Pressure Area(2) 140-175 gsm No No No
up to 47 lb
bond
- Paper Base 75-135 gsm No No No
(long grain) 20-36 lb
Envelopes 60-105 gsm No No No
(Sulfite, wood-free 16-28lb bond(3)
or up to 100%
cotton bond)
Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.
Note: (2) Paper less than 75 gsm is limited to simplex only at less than 60% relative humidity and is not supported in duplex. Paper less than 75 gsm must be printed with paper weight set to light.
Note: (3) Pressure sensitive area must enter the printer first.
Note: (4) 100% cotton content maximum weight is 24 lb. bond.
Note: (5) 28 lb bond envelopes are limited to 25% cotton content.
Note: (6) The duplex option supports the same weights and types as the printer except for 16-19.9 lb (60-74.9 gsm) grain long bond, A5, cardstock, transparencies, envelopes, and paper labels
Note: (7) Occasional use only.
Banner Paper Support
Size 210 to 215.9 mm wide by up to 1219.2 mm long (8.27 to 8.5
inches wide by up to 48 inches long)
Weight(1) 90 to 105 gsm (24 to 28 lb. Bond)
Type Paper
Note: (1) 105 gsm (28 lb.) banner paper must be printed with Paper Weight set to Heavy.
Additional Media Guidelines
Follow the media guidelines below for successful printing:
Paper
- Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
- Colored papers must be able to withstand 170 deg C (338 deg F) fusing temperature.
- Preprinted forms and letterheads must be able to withstand 180 degrees C (356 degrees F) fusing temperature and should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the InfoPrint Color 1764 MFP.
- Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers, A5 paper less than 80 gsm, recycled paper less than 75 gsm; and preprinted papers requiring a high degree of registration.
- Recycled paper less than 80gsm (21lb) may cause unacceptable results.
Envelopes
- All envelopes should be new, unused, and without package damage.
- Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
- Minimum weight: 60 g/m2 (16 lb.)
- The following envelopes should not be used:
- Envelopes with windows, holes, perforations, cutouts, or deep embossing.
- Envelopes with metal clasps, string ties, or metal folding bars.
- Envelopes with exposed flap adhesive when the flap is in the closed position.
- For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
- Under high humidity conditions (over 60%), envelopes may seal during printing.
Transparencies
- Use letter or A4-size sheets only.
- Transparencies specifically designed for xerographic copy machines or laser printers may be used with the InfoPrint Color 1764 MFP.
Labels
Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.
Guidelines for Scanner Document Feeder
The automatic document feeder is designed to handle most paper types. However, if you are unsure if your document will cause a jam in the automatic document feeder, we recommend that you scan it using the flatbed. The following cannot be properly fed by the automatic document feeder:
- Paper with clip or staple attached
- Paper with ink not totally dry
- Paper with inconsistent thickness, such as envelopes
- Paper with wrinkles, curls, folds or tears
- Tracing paper, coated paper, carbonless paper
- Paper that is too large or too small (use flatbed instead)
- Items other than papers, such as cloth, metal or OHP film
- Notched paper
- Paper with an odd (non-rectangular) shape
- Photographic paper
- Paper with perforations on its side
- Very thin paper
Media Sensing
The InfoPrint Color 1764 MFP has the following paper sensors:
Standard Optional Optional Optional
Input 500-Sht. 2000-Sht. Envelope
Sensing Function Trays Drawers Drawer Drawer
--------------------------- --------- -------- --------- --------
Paper Size Sensing
Paper Tray Yes Yes Yes No
Multipurpose Tray No No No No
Paper Out Sensing
Paper Tray Yes Yes Yes Yes
Multipurpose Tray No No No No
Tray Present Sensing
Paper Tray Yes Yes Yes Yes
Multipurpose Tray No No No No
Misc. Other
Narrow Media Yes No No No
Auto Size Yes No No No
Tray Low Yes Yes No No
Pass Through Yes Yes Yes No
Cover Open/
Cartridge Present Yes No No No
Input Sensor Yes No No No
Fuser Exit Yes No No No
Optional Optional
Output 5 -Bin Optional
Sensing Function Expander Mailbox Finisher
--------------------------- --------- -------- --------
Output Bin Near Full Yes No Yes
Output Bin Full Yes Yes Yes
Output Bin Empty No Yes Yes
Envelope Conditioning
Misc. Other
Pass Through Yes Yes Yes
Stapling Sensing
Stapler Low No No Yes
Staple Cartridge Present No No Yes
Stapler Empty No No Yes
Stapler Top Cover No No Yes
Stapler Access Door No No Yes
Paper in Stapler No No Yes
Printer Features
All printer features are customer installable. FC = feature code.
Additional input or output options may preclude use of the scanner shelf or require other furniture. Contact your sales representative for further information.
Network Compatibility
The standard Ethernet connections support the following protocols:
- TCP/IP (IPv4 and IPv6)
- Novell (IPX/SPX including NetWare Directory Services)
- AppleTalk**
- LexLink** (DLC/LLC) (Not supported with external print servers)
The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:
- IPP: Internet Printing Protocol 1.0
- SLP: Service Location Protocol v1
- NTP: Network Timing Protocol
Details on Card for IPDS and SCS/TNe Emulation
These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM iSeries applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).
IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:
- Full color printing using Function set 45
- PDF417 2D bar code, Data Matrix, MaxiCode bar code support, QR code 2D barcode and the UCC/EAN 128 barcode
- Capturing bitmap or outline fonts to hard disk or to flash memory resulting in reduced network traffic over LAN.
- Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
- No changes to host applications.
- Supports emulation of common IBM IPDS and SCS printers.
- One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or iSeries documents (AFP/IPDS, SCS).
- Supports IPDS color commands. The colors are transformed to black or shades of gray, based upon the IPDS menu Color Mode setting.
- IPDS N-ups and N-up Explicit Page Placement support. Print 1 to 4 pages per side or up to 8 pages per sheet when printing duplex.
- Download DBCS outline and bitmap fonts from the host in IPDS. Support for Simplified Chinese, Traditional Chinese, Korean and Japanese is provided.
- Automatic resolution sensing for IPDS when the Host Resolution menu is set to Auto. Selecting Auto allows 240, 300 and 600 dpi resources to be downloaded from the host.
- Product Identifier Self Defining Field Information is returned to the host with IPDS. Device type, serial number , device code levels and device name are returned to the host. These may be displayed at the host to aid in device location and maintenance.
With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an iSeries or System/390 computer.
With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or iSeries host printer. See the compatibility section for details.
With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an iSeries or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port. See the compatibility section for more details.
For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.
The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.
DBCS characters in Traditional Chinese, Simplified Chinese, Korean, and Japanese can be downloaded and printed from the host. DBCS fonts may be stored in flash memory or hard disk using the Font Capture feature to reduce network traffic and transmission time. The separate DBCS Fonts Cards canot be used in conjunction with the Card for IPDS and SCS/TNe.
The Card for IPDS and SCS/TNe cannot be used in the InfoPrint Color 1754/1764 laser printer in conjunction with the Bar Code Card.
The IPDS emulation supports the IPDS data and resource towers. Fonts can be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Service POSTNET barcode, PLANET barcode and the euro currency symbol are supported within IPDS.
The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.
Fonts
AFP/IPDS Font and Typestyle Support:
The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).
The following languages are supported:
- Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English
- Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian
- Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian
- Greek
- Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.
The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.
The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.
The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.
The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.
Font Capture
Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.
PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.
Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.
If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.
The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.
iSeries
On the iSeries, Font capture is supported by OS/400 V5R2 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG/CHGPSFCFG), set FNTCAPTURE (*YES).
Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Verify that *YES is specified for the Font Capture attribute. Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.
For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.
Mainframe (OS/390 or z/OS)
Font capture is supported by PSF for OS/390 or z/OS. Use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.
SCS Font and Typestyle Support
The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.
On the iSeries, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.
A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.
These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).
Compatibility
For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.
Support Notes:
- Microcode updates and User's Guides are available from the IBM web site.
- See the appropriate User's Guide for configuration instructions.
- When the printer is emulating an IBM printer, the function supported depends on the IBM host software.
For Direct Network Attachment - Hardware Compatibility
When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:
- Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
- MarkNet** N2000 Series print servers
- MarkNet X2000 Series print servers (AFP/IPDS only)
- MarkNet Pro print servers (AFP/IPDS only)
The optional MarkNet print servers support Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.
Notes:
- MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.
- For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.
- Any MarkNet X2000 microcode level provides AFP/IPDS support only.
- For IPDS printing, a minimum of 16MB of printer memory is required.
Software Compatibility for AFP/IPDS Printing over TCP/IP
The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:
- OS/400 V5R2 or later through PSF/400 (See Note).
Note: With OS/400 V5R2, to print IPDS over TCP/IP through PSF/400.
Software Compatibility for SCS LU1 Printing over TCP/IP
The IBM iSeries software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:
- OS/400 V5R2 or later with all PTFs applied
Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same.
The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:
- IBM Communications Server (CS) for OS/390 or z/OS Version 2 Release 5 or later on ESA systems (Note: All appropriate APARs must be applied)
- TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)
- TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature
- Using Cisco 7500 Series Routers
SCS LU1 Printing using a Gateway and TCP/IP
If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or iSeries. Examples of these gateways are:
- IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp
- Microsoft NetResults SNA Server 4.0
- Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server
- Attachmate E-Vantage SNA Gateway 2.0
- Barr Systems Communications Server
- Cisco TN3270 Server
- OpenConnect using the WebConnect SNA Access Server or SNA Print Server
Direct USB printing and scanning
Direct USB connectivity allows individuals to print or scan PDF, TIFF, and JPEG files directly to the MFP using an approved USB flash memory device. Through the MFP's USB Direct interface located on the MFP operator panel, a user can simply insert the USB flash memory device, select the appropriate file and choose to print the file on this specific MFP. Similarly, the user can choose to send scanned files from the MFP to a USB flash memory device .
Direct USB requires a supported USB flash memory device. The following USB flash memory devices has been tested and approved for this product:
- Lexar JumpDrive 2.0 Pro (256 MB, 512 MB, 1 GB)
- SanDisk Cruzer mini (256 MB, 512 MB, 1 GB)
While other USB flash drives have not been tested and therefore cannot be approved, these products may function if the storage device meets the following qualifications:
- Supports the USB 2.0 specification, specifically supporting the Full-Speed mode
- Use the FAT file system
In addition to the above hardware requirements, PDF files used with Direct USB printing must support PDF standard version 1.5 or earlier. PDF files with restricted printing permissions or encryption are not supported.
Certifications
The InfoPrint Color 1764 MFP complies with the global safety standard for Information Technology Equipment, i.e. IEC 60950, and its country equivalents in the markets we serve.
100-127 Volt
- Canada:
- Canadian Standards Assoc. CAN/CSA-C22.2 No. 60950-1-03, Information Technology Equipment - Safety - Part 1: General Requirements, deviations D1 & D2
- EMC Compliance Statement
- ICES Class A
- USA:
- FCC Class A per FCC Rules, Parts 2 and 15
- UL 60950-1, Information Technology Equipment - Safety - Part 1: General Requirements, deviations D1 & D2
- IEC 320-1 International Standard Electrical Appliance Connectors
200-240 Volt
- European Union:
- CE Class A
- European Union:
- IEC 60950 1, Information Technology Equipment -Safety - Part 1: General Requirements, IEC 60825-1, +A1 +A2
- IEC 61000-3-2 (harmonics)
- IEC 61000-3-3 (Flicker)
- EN 55022:1994 Class A
- EN 55024:1998
- EN 61000-3-3: 1995
- CISPR 22: 1993 Class A
- IEC 320 Appliance Couplers for Household and Similar General Purposes
- CE marking via EU Declaration of Conformity to the EMC (89/336/EEC), and Low Voltage (73/23/EEC) R&TTE (1999/5/EC) Directives
- Germany:
- GS (T ?V)-EN 60950-1 Information Technology Equipment - Safety - Part 1: Equipment Classifications, Requirements and User's Guide
- Sweden
- SEMKO "S" mark
Marketing
- Russia:
- GOST-R "Cpt" mark
Fax Certifications
- USA:
- CFR 47, Part 68-TCB Grant of approval
- Canada:
- Self Declaration to CS-03
- European Union:
- Meets R&TTE Directive 1999/5/EC and test reports to Test Report to TBR-21 and EG 201 121 and ETSI TS 103 021, -1, -2, -3.
- Israel:
- MOC certificate
- Russia:
- Russian Ministry certificate
- South Korea:
- MIC certificate
This product must be homologated in countries where required.
Physical Specifications
Dimensions
Width Depth Height Weight(1)
----------- ----------- ----------- ---------
InfoPrint Color 679.0 mm 584.0 mm 1410.0 mm 97.50 kg
1764 MFP (26.75 in) (23.0 in) (55.5 in) (215 lb)
Options
500-Sheet Drawer 127.0 mm 604.5 mm 469.9 mm 6.1 kg
(5.0 in) (23.8 in) (18.5 in) ( 13.5 lb)
500-Sheet Tray 96.5 mm 396.2 mm 386.1 mm 1.2 kg
(3.8 in) (15.6 in) (15.5 in) ( 2.6 lb)
Duplex Unit 88.9 mm 604.5 mm 469.9 mm 6.1 kg
(3.5 in) (23.8 in) (18.5 in) (13.5 lb)
2000-Sheet Drawer 391.2 mm 660.4 mm 604.5 mm 22.3 kg
(15.4 in) (26.0 in) (23.8 in) (49.0 lb)
Envelope Drawer 127.0 mm 604.5 mm 469.9 mm 6.1 kg
(5.0 in) (23.8 in) (18.5 in) (13.5 lb)
Outdoor Media 127.0 mm 604.5 mm 469.9 mm 6.1 kg
Drawer (5.0 in) (23.8 in) (18.5 in) (13.5 lb)
Banner Tray (w 228.6 mm 304.8 mm 774.7 mm 3.3 kg
output bail) (9.0 in) (12.0 in) (30.5 in) ( 7.2 lb)
Output Expander 177.8 mm 368.3 mm 469.9 mm 2.5 kg
(7.0 in) (14.5 in) (18.5 in) ( 5.4 lb)
5-Bin Mailbox 292.1 mm 368.3 mm 469.9 mm 4.0 kg
(11.5 in) (14.5 in) (18.5 in) ( 8.7 lb)
StapleSmart 228.6 mm 447.7 mm 495.3 mm 5.6 kg
Finisher (90. in) (17.6 in) (19.5 in) (13.0 lb)
Printer Stand 101.6 mm 673.1 mm 609.6 mm 9.1 kg
(4.0 in) (26.5 in) (24.0 in) (20.0 lb)
Note: (1) Weights for low-voltage and high-voltage models are the same.
Recommended clearances
Left Right Front Rear Top
All models ----------- ----------- ----------- ---------- ---------
304.8 mm 304.8 mm 508.0 mm 304.8 mm 508.0 mm
(12.0 in) (12.0 in) (20.0 in) (12.0 in) (20.0 in)
Operating Environment
- Operating environment:
- Temperature: 16.0 to 32.0 C (60 to 90 F)
- Relative humidity: 8% to 80%
- Altitude: 0 to 3,048 meters (10,000 ft)
- Storage and shipping environment (packed):
- Temperature: -40.0 to 43.3 C (-40 to 110 F)
- Relative humidity: 8% to 80%
- Altitude: 0.25 atmospheric pressure (equivalent to 10,300 m, 34,000 ft)
- Storage environment (unpacked):
- Temperature: 0 to 40.0 C (32 to 104 F)
- Relative humidity: 5% to 80%
Electrical specifications
Low-voltage models
- 100 - 127 VAC at 50 to 60 Hz, nominal
- 90 - 137 VAC, extreme
High-voltage models
- 220 - 240 VAC at 50 to 60 Hz, nominal
- 198 - 259 VAC, extreme
Average power consumption
Printing states All models
--------------------------------- ----------
Off 0.95 W
Power Saver Mode 42 W
Standby Mode 180 W
Continuous Copying 610 W
Continuous Printing 675 W
Continuous Scanning 210 W
Average Current
115 Volts x.x A RMS
230 Volts x.x A RMS
Note: Using a 220 VAC to 110 VAC power converter with the low voltage model is not recommended.
Acoustics
InfoPrint Color 1764 MFP and M40 Option:
Declared Declared
Declared A-Weighted Sound A-Weighted Sound
A-Weighted Pressure Level Pressure Level
Sound Power LpAm (db) LpAm (db)
Mode Level LWAd (B) Bystander Position Operator position
--------------------- -------------- ------------------ ----------------
Simplex mono printing 6.8 50 NA
ADF mono copy 6.8 51 52
ADF mono scan 6.8 49 54
Idle 4.6 29 NA
Simplex color printing 6.8 50 NA
ADF color copy 6.7 50 51
ADF color scan 5.9 41 46
Note: NA = Not Applicable.
Note: LWAd is the statistical upper-limit A-weighted sound power level (rounded to the nearest 0.1 B).
Note: LpAm is the mean A-weighted emission sound pressure level measured at the 1-meter bystander positions (rounded to the nearest dB).
Note: All measurements made in conformance with ISO 7779 and declared in conformance with ISO 9296.
Note: All measurements were made with the M40 MFP Option scanner and InfoPrint Color 1764 printer together.
Limitations
Not applicable.
Hardware Requirements
Not applicable.
Software Requirements
Software
Printer drivers are provided on the Drivers and Utilities CD that is packaged with the printer. See Publications section for details.
Supported Operating Systems (Printer & Scan Drivers)
Network
TWAIN
---------------------------------------------------- -------
Apple Macintosh(1)
-Mac OS 9.x N
-Mac OS X (10.2, 10.3, or 10.4) Y
Microsoft Windows(1)
-Microsoft Windows 95 4.00950 (OSR2) or later(3) N
-Microsoft Windows 98.1st Edition(3) N
-Microsoft Windows 98.2nd Edition N
-Microsoft Windows Me N
-Microsoft Windows NT 4 SP6 N
-Microsoft Windows NT 4 Server SP6 N
-Microsoft Windows 2000 Professional Y
-Microsoft Windows 2000 Server Y
-Microsoft Windows 2000 Advanced Server Y
-Microsoft Windows 2000 Server running Terminal Serv. Y(7)
-Microsoft Windows 2000 Server running Terminal Serv. Y(7)
with Citrix MetaFrame XP Presentation Server
-Microsoft Windows 2000 Server running Terminal Serv. Y(7)
with Citrix MetaFrame Presentation Server 3.0
-Microsoft Windows 2000 Server running Terminal Serv. Y(7)
with Citrix MetaFrame Presentation Server 4.0
-Microsoft Windows XP Home Y
-Microsoft Windows XP Professional Y
-Microsoft Windows XP Professional x64 Edition Y(6)
-Microsoft Windows Server 2003 Standard Edition Y
-Microsoft Windows Server 2003 Standard Edition Y(7)
running Terminal Server
-Microsoft Windows Server 2003 Enterprise Edition Y
-Microsoft Windows Server 2003 Enterprise Edition Y(7)
running Terminal Server
-Microsoft Windows Server 2003 x64 Standard Edition Y(6)
-Microsoft Windows Server 2003 x64 Standard Edition Y(6,7)
running Terminal Server
-Microsoft Windows Server 2003 x64 Enterprise Edition Y(6)
-Microsoft Windows Server 2003 x64 Enterprise Edition Y(6,7)
running Terminal Server
-Microsoft Windows 2003 Server running Terminal Serv. Y(7)
-Microsoft Windows Server 2003 running Terminal Server Y(7)
with Citrix MetaFrame XP Presentation Server
-Microsoft Windows Server 2003 running Terminal Server Y(7)
with Citrix MetaFrame Presentation Server 3.0
-Microsoft Windows Server 2003 running Terminal Server Y(7)
with Citrix MetaFrame Presentation Server 4.0
-Microsoft Windows Server 2003 Standard x64 Edition Y(6,7)
running Terminal Server with Citrix MetaFrame
Presentation Server 4.0 for Microsoft Windows Server
2003 x64 Edition
-Microsoft Windows Server 2003 Enterprise x64 Edition Y(6,7)
running Terminal Server with Citrix MetaFrame
Presentation Server 4.0 for Microsoft Windows Server
2003 x64 Edition
Novell(2)
-Novell NetWare 3.2, 4.2 (bindery) N
-Novell NetWare 4.2, 5.x, 6.x (NDS) N
-Novell NetWare 5.x, 6.x with iPrint or NDPS N
-Novell Open Enterprise Server for NetWare with NDS, N
iPrint or NDPS
Network
SANE
------------------------------------------------------------- -------
UNIX(3)
-HP UX 11.00, 11.11 N
-Sun Solaris SPARC 7, 8, 9, 10 N
-Sun Solaris x86 10 N
-IBM AIX 5.1, 5.2, 5.34 N
Linux
-SuSE Linux Enterprise Server 8 Y
-SuSE Linux Enterprise Server 9 Y
-SuSE Linux Professional 9.2, 9.3 Y
-SuSE Linux Professional 10, 10.1 Y
-RedHat Enterprise WS 3 Y
-RedHat Enterprise WS 4 Y
-Debian GNU/Linux 3.1 Y
-Linspire 5.0 Y
-Red Flag 4.0,5.0 (Simplified Chinese only)(4) Y
-Limpus 9.2.9.3 (Traditional Chinese only)(4) Y
IBM AIX Colon Files
-IBM AIX 4.3.3, 5.1, 5.2, 5.3 N
Other
-Virtually any platform supporting TCP/IP (5) N
-IBM iSeries and AS/400 Systems with TCP/IP with OS/400 N
V3R1 or later, using OS400 Host Print Transform5
-SAP Device Type Support N
Note: (1) Download the latest MFP drivers from the IBM Web Site.
Note: (2) IBM Printing Solution is only available from the IBM Web Site.
Note: (3) MFP driver support only. No support for IBM utilities. Driver must be installed using Windows Add Printer Wizard.
Note: (4) Support for these operating systems only available from the IBM Web Site.
Note: (5) Drivers for these operating system not provided by IBM.
Note: (6) Drivers for these operating systems available from the IBM Web Site in 1st half 2006.
Note: (7) TWAIN support in Terminal Server environments requires a Terminal Server-aware TWAIN application
Note: (8) Citrix Metaframe, Metaframe XP are registered trademarks of Critix Systems Inc.
The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.
Management Solutions
MarkVision Professional and MarkVision Messenger are available via the Web at:
- www.markvisionprofessional.com.
NetPnP, Software Installation and Distribution tools are provided on Drivers and Utilities CDs.
MarkVision Professional
MarkVision Professional is a cross-platform printer management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.
MarkVision Messenger
MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.
Software Installation and Distribution Tools
The IBM Script Install utility provides a very powerful method to install or uninstall MFPprinter software in Windows NT 4.0, Windows 2000, Windows XP or Windows Server 2003 environments. Through the use of the Script Install utility, System Administrators can easily perform mass rollouts of IBM printers/MFPs by creating custom scripts to perform local or remote printer/MFP software installations on end user workstations.
When combined with the Driver Profiler utility, I/T shops can centrally create and deploy custom printing environments for each remote location. Together, these utilities drastically reduce the time required to install MFP software in a distributed environment.
Printing Solution for Novell systems
The IBM Printing Solution for Novell systems offers administrators more control over IBM printers/MFPs. This all-inclusive package provides support for both NDPS and iPrint printing systems on NetWare 5.1, 6.0 and 6.5 servers and NOES for NetWare servers. The package consists of Novell's NDPS gateway coupled with IBM's custom control snap-ins for both NetWare Administrator (NWAdmin) and iManager. By offering custom support for both NetWare Administrator and iManager management utilities, this offering allows administrators to take full control of IBM MFPs in a Novell printing environment.
The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances. MarkVision Professional is available from the IBM Web site.
Host Software
InfoPrint Color 1764 MFP uses the InfoPrint Color 1764 drivers.
Windows Custom Drivers
To maximize the user experience, IBM offers custom PCL emulation and PostScript drivers for Windows systems. Custom drivers for Windows provide the most comprehensive set of printing features available for IBM products. Offering an easy-to-use interface and time saving preset features, the IBM custom drivers allow users to access popular MFP features intuitively.
Windows System Drivers
System drivers for Windows provide users with basic printing capabilities for their IBM printers/MFPs. Built on Microsoft technology, system drivers mix key IBM MFP capabilities with Microsoft's rendering engine to provide a solid, no-frills driver. IBM system drivers are available in PCL-XL emulation and PostScript versions.
MFP Drivers for UNIX and Linux systems
IBM MFP/printer drivers reduce the complications of printing in UNIX and Linux environments. Built on the LPRng printing system, the IBM printer/MFP drivers provide fully scriptable command-line options. When running in X-Windows mode, IBM MFP drivers make it easy to access many popular MFP features without memorizing command line options through a GUI interface.
Printing Software for Macintosh
IBM offers Mac OS printing software (PPDs, PDEs, etc.) to provide a first rate printing experience in an Apple environment. These files allow Mac OS 9 and Mac OS X users access to advanced printing features included with the IBM product. Status Window complements the driver software by providing printer status feedback from a remote location. Other utilities such as File Downloader and IP Settings Utility provide efficient means to perform targeted tasks.
Network TWAIN Scan Drivers
IBM Network TWAIN scan drivers provide remote scanning capabilities to Windows and Macintosh computers. IBM provides Network SANE drivers with remote scanning capabilities for Linux workstations. These drivers allow TWAIN (or SANE) compatible applications to acquire raw scan data directly from a networked IBM multi-function printer.
Microsoft Windows Certification
This product includes Microsoft Certified and digitally signed print drivers. The driver certification indicates a high level of compatibility between the Windows operating system and the printer. Print drivers for these products have received certification under the following operating systems:
- Windows XP:
- Home Edition
- Professional Edition
- Professional x64 Edition (System driver only)
- Windows Server 2003:
- Standard Edition
- Enterprise Edition
- Standard x64 Edition (System driver only)
- Enterprise x64 Edition (System driver only)
IBM InfoPrint Manager
InfoPrint Manager support: Yes (post GA). Requires administrators to create printer objects.
Network Printer Resource Utility (NPRU)
NPRU will not support the InfoPrint Color 1764 MFP.
TCP/IP Network Port Monitor Utility
This utility will not support the InfoPrint Color 1764 MFP.
LPR Remote Printing Client Utility
This utility will not support the InfoPrint Color 1764 MFP.
User's Guide
Contained on the M40 MFP Software and Documentation CD.
This will be available in the following languages: English, French, Italian, German, Spanish, Brazilian Portuguese, Danish, Dutch, Finnish, Norwegian, Swedish, Russian, Polish.
Operator Panel
This will support the following languages: English, French, Italian, German, Spanish, Brazilian Portuguese, Danish, Dutch, Finnish, Norwegian, Swedish, Russian, Polish.
No Charge Specify Codes
None.
Special Feature Codes -- Chargeable
Mach Feature Part
type Model number number Description UPC
---- ----- ------- ------- ------------------------------ ---------------
4899 001 39V2095 InfoPrint Color 1764 MFP 8-83436-00167-0
39V2310 Card for IPDS and SCS/TNe 8-83436-00880-8
39V2311 Bar Code Card 8-83436-00881-5
ServicePacs
Machine Electronic
type Model Description part number
------- ------------ --------------------------------- -----------
4899 All SVCPAC PTR 2YR IOR 9X5/ND 44J8882
4899 All SVCPAC PTR 3YR IOR 9X5/ND 44J8883
4899 All SVCPAC PTR 1YR IOR 24X7/SD 44J8884
4899 All SVCPAC PTR 2YR IOR 24X7/SD 44J8885
4899 All SVCPAC PTR 3YR IOR 24X7/SD 44J8886
4899 All SPACMA PTR 1YR IOR 9X5/ND 44J8887
4899 All SPACMA PTR 2YR IOR 9X5/ND 44J8888
4899 All SPACMA PTR 1YR IOR 24X7/SD 44J8889
4899 All SPACMA PTR 2YR IOR 24X7/SD 44J8890
Media Handling Features
(P/N 39V1498) 500-Sheet Drawer
- Minimum required = 0, maximum allowed = 3 or 1 if 2,000-Sheet Drawer is installed
- Prerequisite = none, Co-requisite = none
This input option can be installed beneath the printer to offer an added input source which holds approximately 500 sheets of 20 lb. paper.
(P/N 39V1499) 500-Sheet Tray
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. Drawer includes tray plus support unit. For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 500 sheets of (20 lb.) paper.
(P/N 39V1501) 2,000-Sheet Drawer
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = If the Duplex feature is installed, a 500-Sheet Drawer feature is required and must be installed between the duplex unit and the 2,000-Sheet Drawer
This input option can be installed beneath the printer to offer an added input source which holds approximately 2,000 sheets of 20 lb. paper.
(P/N 39V1502) Envelope Drawer
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This feature installs beneath the printer and hold approximately 60 envelopes (20 lb., 75 gsm).
(P/N 39V1503) Output Expander
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = This feature is mutually exclusive with the 5-Bin Mailbox and StapleSmart Finisher
This output option offers an additional output destination, which holds up to 650 sheets of (20 lb., 75 gsm) paper.
(P/N 39V1504) 5-Bin Mailbox
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = This feature is mutually exclusive with the Output Expander and StapleSmart Finisher
This output option offers five output destinations in one. Each of the 5 bins on this option supports approximately 100 pages (20 lb) of paper.
(P/N 39V1507) StapleSmart Finisher
- Minimum required = 0, maximum allowed = 1
- Prerequisite = None, Co-requisite = none
- Conflict = This feature is mutually exclusive with the Output Expander and 5-Bin Mailbox
This feature offers stapling, offsetting, and an additional output bin. It can support up to 500 sheets of unstapled media. For stapled media, the output bin supports up to 15 stapled sets or 375 sheets.
The stapler can staple a maximum of 25 sheets per set. The staple cartridge contains 3000 staples. The finisher has two handy storage compartments for storing extra staple cartridges. Refill staple cartridges are available in packages of three cartridges.
(P/N 39V1505) Banner Tray
- Minimum required = 0, maximum allowed = 1
- Prerequisite = None, Co-requisite = none
The Banner Tray feature is an extension of the Multi Purpose Feeder and allows the automatic feeding up to 50 sheets of 24 lb. (90 g/m2) banner paper up to 8.5 inches wide x 48 inches long (215.9mm x 1219.2mm). It also serves as an extension of the output tray, to hold the printed banner paper as it exits from the printer. The banner media tray is easily installed and features a fold-down tray for space savings when not in use. All media which can be fed from the Multi Purpose Feeder can be used when the Banner Tray is attached. 50 sheets of 24 lb (90 g/m2) paper is the maximum input and output of banner paper supported using the Banner Tray. Banner paper is not supported using duplex mode. The option ships with a box of the Banner Paper.
Memory and Flash Memory Features
The InfoPrint Color 1764 MFP has no free slots for DRAM memory and one slot for flash memory features. A maximum of 768 MB of memory and 64 MB of flash memory is supported.
Note: The MFP has no open slots for interface cards.
(P/N 75P6986) 128 MB Memory DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 75P6987) 256 MB Memory DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 75P6988) 512 MB Memory DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
The flash memory features for the printer include:
(P/N 75P6989) 32 MB Flash DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
(P/N 75P6990) 64 MB Flash DIMM
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
Internal Connection Features
In addition to the standard USB port for all models, each InfoPrint Color 1764 MFP model has no open interface slots that can be used for optional local connections or network connections.
Furniture Features
(P/N 39V1614) Scanner Stand
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
Cable Features
(P/N 75P7030) 2-meter USB Cable
- Minimum required = 0, maximum allowed = no maximum
- Prerequisite = none, Co-requisite = none
For USB attachment, this USB cable is recommended and must be ordered separately.
Network Cards for External Print Servers Features
The following features provide external network connections:
External Network Cards
(P/N 39V1524) Ethernet 10BaseT/100BaseTX (1 USB port)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This external print server has one USB port to connect to an Ethernet 10BaseT/100BaseTX network.
(P/N 39V1525) Ethernet 1000BaseTX (4 USB ports)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This external print server has four USB ports to connect up to four printers to an Ethernet 10BaseT/100/1000BaseTX network.
(P/N 39V1526) Ethernet 10BaseT/100BaseTX (1 parallel port)
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
This external print server has one parallel port to connect to an Ethernet 10BaseT/100BaseTX network.
(P/N 75P6854) 802.11G Wireless To USB
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite =none
This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11g wireless standard. This standard operates at speeds of up to 54 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building construction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.
The feature is an external adapter that connects to the USB port on the printer.
Applications Solutions
These features plug into the one Application solution slot.
(P/N 39V2311) Bar Code Card
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = this feature is mutually exclusive with the Card for IPDS and SCS/TNe feature
The Bar Code Card Card enables the InfoPrint Color 1764 MFP to print more than forty seven of the most popular industry standard bar codes, including Datamatrix, QR Code, Aztec, microPDF417, PLANET, Codablock F, ITF14, and HIBC128. The Bar Code Card card generates bar codes algorithmically for improved readability.
The Bar Code Card Card emulates HP printers with an HP BarCodes & More font solution, JetCAPS BarDIMM or JetCAPS BarSIMM (v. 2.0b).
(P/N 39V2310) Card for IPDS and SCS/TNe Feature
- Minimum required = 0, maximum allowed = 1
- Prerequisite = none, Co-requisite = none
- Conflict = this feature is mutually exclusive with the Bar Code Card feature
The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM servers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers
Feature Exchanges
There is no feature exchange with these products.
Trademarks
(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited. IBM Corporation 2007.