IBM Infoprint 1650 MFP 4544
IBM Infoprint 1650 MFP Express Printer
Fully refurbished with 90-day warranty
4544-x11 39V1572
$469.00
Fully refurbished with 90-day warranty
4544-x11 39V1572
$469.00
 75p6960 Toner | |
 39V2596 Pick-Up Assembly | |
 39V2326 Separator Roll Assembly | |
| 39V2597 Cushion Pressure Pad | |
 39V2598 Fuser Maintenance Kit | 39V2598 IBM 1532/52/72, 1570, 1650, 1572 MFP Fuser Maintenance Kit New 39V2598 Compatible (New) $279.00 |
 39V2600 Fuser | 39V2600 IP 1532/52/72, 1570, 1650, 1572 MFP Fuser Unit (110V) New 39V2600 Advanced Exchange (New) $245.00 39V2600 IBM 1532/52/72 1570 1650 1572 MFP Fuser Unit (110V) Fully refurbished with 90-day warranty 39V2600 Advanced Exchange $159.00 |
 39V0213 4505 250-Sheet Drawer | 39V0213 LOCK 250-Sheet Locking Drawer with Tray New 39V0213_LOCK (please allow approx 5 days) (New) $299.00 |
 39V0214 4506 500-Sheet Drawer | |
 39V0317 4502 500-Sheet Tray | |
 39V0215 4520 2,000-Sheet Drawer (Letter) | |
 39V0217 4401 500-Sheet Duplex Unit | 39V0217 500-Sheet Duplex Unit New 39v0217 (New) Retired, no longer available: Contact for alternatives 39V0217 500-Sheet Duplex Unit Fully refurbished with 90-day warranty 39v0217 Retired, no longer available: Contact for alternatives |
 39V0219 4511 Envelope Feeder | |
 75P6986 4390 128 MB Memory DIMM | |
 75P6987 4391 256 MB Memory DIMM | |
 75P6988 4392 512 MB Memory DIMM | 75P6988 Infoprint Brand 512 MB DIMM New 75P6988 (New) Retired, no longer available: Contact for alternatives |
 75P6989 4038 32 MB Flash Memory | |
 75P6990 4040 64 MB Flash Memory | |
 39V0796 4820 Card for IPDS and SCS/TNe | |
 39V0797 4870 Bar Code Card | |
 39V0326 4138 Serial Interface Card | |
 39V0327 4139 Parallel 1284-B Interface Card | |
 75p6992 4166 Ethernet 1000BaseTX | |
 39V1524 4163 Ethernet 10/100BaseTX (1 USB port) | |
 39V1525 4164 Ethernet 1000BaseTX (4 USB ports) | |
 39V1526 4165 Ethernet 10/100BaseTX (1 parallel port) | |
 75p6857 4193 802.11g Wireless to Ethernet | |
 75P6854 4190 802.11g Wireless to USB | |
4180  75P7029 10 ft. Parallel Cable | |
4184  75P7030 2-meter USB Cable | |
4530  39V1291 Caster Base | |
| 4531 39V1292 Large Spacer | |
 53P7950 Printer Stand | |
 4534 53P7951 Printer Stand | |
 4535 53P7952 Printer Stand | |
 QQC2025 Printer Stand |
| 75p6960 Toner | |
| 39v2596 Pick-Up Assembly | |
| 39v2326 Separator Roll Assembly | |
| 39v2597 Cushion Pressure Pad | |
| 39v2598 Fuser Maintenance Kit | 39V2598 IBM 1532/52/72, 1570, 1650, 1572 MFP Fuser Maintenance Kit New 39V2598 Compatible (New) $279.00 |
| 39v2600 Fuser | 39V2600 IP 1532/52/72, 1570, 1650, 1572 MFP Fuser Unit (110V) New 39V2600 Advanced Exchange (New) $245.00 39V2600 IBM 1532/52/72 1570 1650 1572 MFP Fuser Unit (110V) Fully refurbished with 90-day warranty 39V2600 Advanced Exchange $159.00 |
| 39v0213 4505 250-Sheet Drawer | 39V0213 LOCK 250-Sheet Locking Drawer with Tray New 39V0213_LOCK (please allow approx 5 days) (New) $299.00 |
| 39v0214 4506 500-Sheet Drawer | |
| 39v0317 4502 500-Sheet Tray | |
| 39v0215 4520 2,000-Sheet Drawer (Letter) | |
| 39v0217 4401 500-Sheet Duplex Unit | 39V0217 500-Sheet Duplex Unit New 39v0217 (New) Retired, no longer available: Contact for alternatives 39V0217 500-Sheet Duplex Unit Fully refurbished with 90-day warranty 39v0217 Retired, no longer available: Contact for alternatives |
| 39v0219 4511 Envelope Feeder | |
| 75p6986 4390 128 MB Memory DIMM | |
| 75p6987 4391 256 MB Memory DIMM | |
| 75p6988 4392 512 MB Memory DIMM | 75P6988 Infoprint Brand 512 MB DIMM New 75P6988 (New) Retired, no longer available: Contact for alternatives |
| 75p6989 4038 32 MB Flash Memory | |
| 75p6990 4040 64 MB Flash Memory | |
| 39v0796 4820 Card for IPDS and SCS/TNe | |
| 39v0797 4870 Bar Code Card | |
| 39v0326 4138 Serial Interface Card | |
| 39v0327 4139 Parallel 1284-B Interface Card | |
| 39v6992 4166 Ethernet 1000BaseTX | |
| 39v1524 4163 Ethernet 10/100BaseTX (1 USB port) | |
| 39v1525 4164 Ethernet 1000BaseTX (4 USB ports) | |
| 39v1526 4165 Ethernet 10/100BaseTX (1 parallel port) | |
| 4193 802.11g Wireless to Ethernet | |
| 75p6854 4190 802.11g Wireless to USB | |
| 4180 75P7029 10 ft. Parallel Cable | |
| 4184 75P7030 2-meter USB Cable | |
| 4530 39V1291 Caster Base | |
| 4531 39V1292 Large Spacer | |
53P7950 Printer Stand | |
4534 53P7951 Printer Stand | |
4535 53P7952 Printer Stand | |
QQC2025 Printer Stand |
The IBM 4544 Infoprint 1650 MFP is an all-in-one multifunction printer (MFP) that provides print, copy, scan, and fax functions. With a 45 page-per-minute letter(1) monochrome laser printer and a 35 sides-per- minute letter(2) scanner, Infoprint 1650 MFP is designed to keep up with the demands of small and medium workgroups.
Note: (1) Exact print speed varies depending on document complexity, system configuration, software applications, driver, and printer status.
Note: (2) Exact scan speed varies depending on the document attributes, system configuration, and user-selected settings.
Model Abstract 4544-X11
The IBM 4544 Infoprint 1650 MFP Model X11 is a low-voltage all-in-one multi-function printer with a 514 MHz processor, one 500-sheet drawer and a 100 sheet multipurpose feeder as standard. Up to four optional drawers are supported for a total input capacity of 4,100 sheets. The output capacity is 500 and an optional duplex output is available.
Model Abstract 4544-011
The IBM 4544 Infoprint 1650 MFP Model 011 is a low-voltage all-in-one multi-function printer with a 514 MHz processor, one 500-sheet drawer and a 100 sheet multipurpose feeder as standard. Up to four optional drawers are supported for a total input capacity of 4,100 sheets. The output capacity is 500 and an optional duplex output is available.
Highlights
The IBM Infoprint 1650 MFP provides the following benefits:
- Local and network print
- Local and network color scan
- Monochrome copy
- Fax
- Simplex ADF
- Legal-size flat bed
IBM Infoprint 1650 MFP is an all-in-one multifunction printer (MFP) that provides print, copy, scan, and fax functions.
Key functions of Infoprint 1650 MFP include:
- Monochrome print, monochrome copy, color/monochrome scan, and monochrome fax
- Vivid adjustable monochrome-touch-screen display
- Intuitive job cancel
- Priority copies
- Copy countdown
- ADF supports mixed letter/legal-size auto sensing
- Legal-size flat bed
- Print from/scan to flash drive
- Fax redirect
- Network Twain Driver
- Wireless option
Standard Maximum Hard
Models memory memory Ethernet USB Port Processor drive Modem
------ -------- ------- -------- -------- --------- ----- -----
011 128 MB 640 MB Standard Standard 514 MHz No Yes
x11 128 MB 640 MB Standard Standard 514 MHz No Yes
The product comes with one 500-sheet drawer and a 100-sheet multipurpose feeder (MFP) as standard. Up to four optional drawers are supported for a total input capacity of 4,100 sheets. Output capacity for all models is 500 sheets. Optional duplex output is available.
Memory
It has one slot for additional SDRAM memory. Memory options include 128 MB, 256 MB, and 512 MB with a total of 640 MB maximum memory. All models have two slots for flash memory and application solution features. One 32 MB or 64 MB flash memory option is supported.
No hard drive is available for the Infoprint 1650 MFP.
Network connections
Fast Ethernet is standard on all models. Optional Gigabit Ethernet is also available. Optional wireless Ethernet is supported through the wired Ethernet port or through the USB port.
Usage rates
The maximum monthly usage for printing is 200,000 impressions. IBM does not recommend printing to these monthly maximums on a consistent basis.
Print quality
The resolution of Infoprint 1650 MFP is:
- 1200 x 1200 dpi (at reduced speed)
- 2400 Image Quality
- 1200 Image Quality
- 600 x 600 dpi
- 300 x 300 dpi
Font support
The Infoprint 1650 MFP resident fonts include support for following:
Emulation Number of scalable fonts Number of bitmapped fonts
------------ ------------------------ -------------------------
PCL 6 89 2
PostScript 3 158 0
PPDS 39 5
Operator panel
The Infoprint 1650 MFP operator panel has:
- Touch-sensitive GUI plus 20 "hard" buttons and one LED
- Mono LCD touchscreen with contrast adjustment
- 5.7-inch display
- Adjustable viewing angle
- Expanded language support
Scanner
----------------------- -------------------------------------------
Scanner Type Color Flatbed Scanner with ADF
Scan Technology Charge Coupled Device (CCD)
Light Source Cold Cathode Fluorescent Lamp (CCFL)
Number of Light Sources 2 CCFLs per CCD module and 1 CCD module per scanner giving the machine simplex scan capability
Max Optical Resolution 600 x 600 dpi (Mono)
- Flatbed 600 x 300 dpi (Color), with final resolution of 300 x 300 dpi
Scan Area - Flatbed Max. 8.5" x 14" (216 mm x 355.6 mm)
Scanner ADF
---------------------- ------------------------------------------
ADF Type C-Path, simplex
Optical Resolution ADF Max. 600 x 600 dpi (Mono)
Optical Resolution ADF Max. 600 x 300 dpi (final resolution 300 x (Color) 300 dpi)
Document Capacity 50 Sheets 20 lb. (75 g/m2) Bond
Media Depth (Thickness) Max. .15 mm Min. .05 mm
Media Weight Max. 32 lb (120 g/m2) Min. 14 lb (52 g/m2)
Scan Area - ADF Max. 8.5 x 14.0 (216 mm x 355 mm)
Min. 4.5 x 5.5 (114.3 mm x 139.7 mm)
Printer
---------------------- --------------
Print Technology Hot Roll Fuser
Print Feed Orientation Short Edge Feed
Fax
----- -------------------------------------------
Modem Built-in Group 3 compatible, Full Function
Fax 33,600 bps, Max V.34 Half Duplex
This product may connect to a Public Telecommunications Network, as such by country regulations and laws this product may require Telecommunications Approval through country Telecommunications Authority prior to sale.
Features
Infoprint 1650 MFP supports the following features:
Part number Description
------- -------------------------------------
39V0213 250-Sheet Drawer
39V0214 500-Sheet Drawer
39V0317 500-Sheet Tray
39V0215 2,000-Sheet Drawer (Letter)
39V0217 500-Sheet Duplex Unit
39V0219 Envelope Feeder
39V0318 400-Sheet Universally Adjust. Tray
39V0319 400-Sheet Universally Adjust. Drawer
39V0320 250-Sheet Universally Adjust. Tray
39V0321 250-Sheet Universally Adjust. Drawer
75P6986 128 MB Memory DIMM
75P6987 256 MB Memory DIMM
75P6988 512 MB Memory DIMM
75P6989 32 MB Flash Memory
75P6990 64 MB Flash Memory
39V1588 Bar Code Card
39V1589 Decryption Card
39V0326 Serial Interface Card
39V0327 Parallel 1284-B Interface Card
75P6992 Ethernet 1000BaseTX
39V1524 Ethernet 10/100BaseTX (1 USB port)
39V1525 Ethernet 1000BaseTX (4 USB port)
39V1526 Ethernet 1000BaseTX (1 parallel port)
75P6854 802.11g Wireless to USB
75P6857 802.11g Wireless to Ethernet
75P7029 10 ft. Parallel Cable
75P7030 2-meter USB Cable
39V1291 Caster Base
39V1292 Large Spacer
53P7950 Printer Stand with Cabinet
53P7951 Printer Stand
53P7952 Low Profile Printer Stand
Accessibility by people with disabilities
For hardware offerings:
The following features support use by people with disabilities:
Controls and latches are operable with one hand and minimal dexterity.
Keys are discernible by touch without activating them.
The display, controls, latches, and levers are accessible to someone in a wheel chair.
Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.
Section 508 of the U.S. Rehabilitation Act
Models
Model Summary Matrix
Model Standard Memory Maximum Memory Ethernet USB Port Processor Hard Drive Modem
011 256 MB 640 MB Standard Standard 514MHz No Yes
x11 256 MB 640 MB Standard Standard 514MHz No Yes
Customer Setup (CSU)
All products are Customer Setup.
Technical Description
Printer Data Streams
The Infoprint 1650 MFP supports the following data streams:
PostScript 3 Emulation
Hewlett-Packard Company PCL 6 Emulation
PPDS Migration Tool
PDF v1.5 emulation
Fonts and Symbol Sets
The fonts in the PCL emulation are compatible with the fonts in the HP LaserJet 4550 and include nine additional fonts and many extra symbol sets to support extra languages and applications. Included in the PCL emulation are OCR-A, OCR-B and Code 3 of 9 barcode fonts. The fonts in the PostScript emulation are compatible with all 136 fonts in Adobe PostScript 3 and include 22 additional fonts.
Additional fonts can be downloaded to the MFP RAM and optional User Flash card.
Included on the CD-ROM shipped with the MFP are screen fonts to match the MFP's resident scalable fonts.
Support for the euro currency character is included in all applicable fonts for both the PostScript and PCL emulations. Twelve of the PCL symbol sets support the euro character including all seven Windows symbol sets.
The MFP supports Unicode printing with special UTF-8 encodings in both the PCL and PostScript emulations. UTF-8 encoding is a particular way to access characters that is very useful for fonts with large character sets. UTF-8 is used by our SAP printing solution.
Maximum Print Speed and Performance
The Infoprint 1650 MFP supports the maximum print speeds listed below. Actual performance depends on:
- Interface to host (parallel, serial, USB or network)
- Host system and application
- Complexity and content of the page
- Certain options added to or selected with the MFP
- Available memory in the MFP
- Media size, media type and tray source
- Print Resolution
Media Size 1200 dpi 600 dpi
------------------------- -------- -------
Ready time to first print
Simplex Letter 12.1 sec 8.5 sec
Duplex Letter 22.7 sec 13.0 sec
Duplex Legal 24.3 sec 13.5 sec
Power saver time to first print
Simplex Letter NA 28.2 sec
Simplex Thru-put up to
Letter 17.9 ppm 45.0 ppm
A4 16.9 ppm 43.0 ppm
Legal 14.5 ppm 36.9 ppm
MPF Thru-put up to
Letter 13.3 ppm 34.9 ppm
Duplex Thru-put up to
Letter 16.4 ppm 35.7 ppm
A4 15.9 ppm 34.2 ppm
Legal 13.7 ppm 32.3 ppm
Nearly Narrow Media Performance (width between 170-209 mm)
Pages before slowdown, number NA 35.0 ppm
After slowdown, PPM NA 17.9 ppm
A5/Narrow Media Performance (width is less than 170 mm)
Pages before slowdown, number NA 10.0 ppm
After slowdown, PPM NA 17.9 ppm
Note: Unless otherwise indicated, all tests are performed from Tray 1 to the standard output bin.
Note: Simplex thru-put tests measure the average steady state speed and starts when the 1st page exits the standard output bin.
Note: Duplex thru-put tests measure the average steady state speed and starts when the 2nd duplex sheet exits the standard output bin.
Note: TTFP tests measure the average time it takes from pressing the "Enter" button on the keyboard to the page exiting the standard output bin.
General Statement on Print Quality
Due to the Infoprint 1650 MFP print technology, paper designed for use with xerographic copiers should provide satisfactory print quality and feed reliability. Other types of supplies may be suitable. It is recommended that users test any particular brand for suitability to their applications. Refer to the MFP User's Guide for additional media specifications.
Print Area
The Infoprint 1650 MFP's printable area is within 4.2 mm (0.176 in.) of all edges of the media. Any information placed outside this specified printable area will not print.
Print Resolution
The following print resolutions are supported:
- 1200 x 1200 dpi
- 2400 Image Quality
- 1200 Image Quality
- 600 x 600 dpi
- 300 x 300 dpi
The Toner Darkness setting offers 10 user selectable settings to balance print darkness and toner savings. The higher the setting: the darker the print. Within the range of print darkness settings up to 50% toner savings can be realized from the factory default setting of 8. The Toner Darkness setting is available through the operator panel under the Quality menu and also accessible from the print driver.
Print Quality Settings
The following settings are available to enhance print quality:
Setting accessed by: Operator panel Driver Embedded Web Server
-------------------- -------------- ------ -------------------
Brightness Yes Yes Yes
Contrast Yes Yes Yes
Enhance Fine Lines No Yes Yes
Gray Correction No Yes Yes
The Infoprint 1650 MFP supports the following printed image formats:
- USB Direct: Support for Direct Image file format
- jpeg (or .jpg), tiff (or .tif), .jpg, .bmp, .*png, .pcx, and .dcx
- HTML
Detailed first copy out times
Input Mode Size Copy Start State Copy Time(1)
------- ---------------------- ------ ---------------- ------------
ADF(1) Text or Text/Photo Letter StandBy/Ready <9.5 sec.
ADF(1) Text or Text/Photo A4 StandBy/Ready <9.5 sec.
Flatbed Text or Text/Photo Letter StandBy/Ready <7.5 sec.
Flatbed Text or Text/Photo A4 StandBy/Ready <7.5 sec.
ADF(1) Photo or Printed Image Letter StandBy/Ready <9.5 sec.
ADF(1) Photo or Printed Image A4 StandBy/Ready <9.5 sec.
Flatbed Photo or Printed Image Letter StandBy/Ready <8.5 sec.
Flatbed Photo or Printed Image A4 StandBy/Ready <8.5 sec.
ADF(1) Text/Mixed Letter PowerSaver 26.0 sec.(1)
ADF(1) Text/Mixed A4 PowerSaver 26.0 sec.(1)
Flatbed Text/Mixed Letter PowerSaver 26.0 sec.(1)
Flatbed Text/Mixed A4 PowerSaver 26.0 sec.(1)
Note: (1) Loading paper in the ADF or Flatbed or touching the Infoprint 1650 MFP display will activate warm-up of the MFP and could lower this time to first copy.
Copy Features/Functions
Copy Resolution:
Copy Output Resolution is 600 X 600dpi.
Copy Collation:
Copy collation function is available on all models, however, this will operate at a reduced level due to no hard drive
Paper Save Functions (N-Up):
2 Up Portrait
2 Up Landscape
4 Up Portrait
4 Up Landscape
Reduced/Enlarge function 25% to 400%
Maximum Number of Copies:
999
Margin Shift
Separator Sheets:
Between pages
Between copies
Between jobs
Overlays
Duplex output without option print duplexor:
Long edge binding
Short edge binding
Fax Specific Specifications
Fax Performance
The following table summarizes performance numbers for the Infoprint 1650 MFP.
Infoprint 1650 MFP Performance
-------------------------------------- --------------------------------
(1) Fax Send Transmission Speed - 12KB 3 spp (seconds per page)
(96K Bits) at 33.6KBS
Fax Storage
-All models 12 MB (0.5 MB Fax logs + 11.5 MB
Fax Storage)
Maximum Group Speed Dials Based on the number of digits in
each raw or group speed dial - no
exact limit
Fax ReDirect E-mail Address Storage 512 characters
Note: (1) Based on ITU-T Test Chart #1 - Text Format Business Letter.
Fax and Telecom Compatibility Information
FAX Compatibility:
-Line Connection PSTN or Analog PABX (RJ-11)
-ITU Compatibility Group 3 / ECM
Standard Resolution 200x100 (Send) 200x100, 204x98 (Receive)
Fine Resolution 200x200 (Send) 200x200, 204x196 (Receive)
SuperFine Resolution 300x300 (Send) 300x300, 204x391 (Receive)
UltraFine Resolution 400x400 (Send) 400x400, 408x391 (Receive)
-Modem
Speed - Standard Max is 33,600 bps, V.34
Half-Duplex
Error Correction Method ITU T.30
Automatic Train Down Yes
-Hand Set No
-Communications
The modem satisfies the requirements specified in ITU-T (CCITT) recommendations V.34 half-duplex,
V.17, V.33, V.29, V.27 ter, V.21and meets the binary signaling requirements of V.8 and T.30 with annex F.
Protocol: ITU T.30
Modulation Type: ITU V.34, V.17, V.29, V.27ter
Tonal Signal: ITU V.8, V.21 T.30
Data Compression/Compression Memory T.4 1D Modified Huffman Encoding
T.4 2D Modified Read Encoding
T.6 Modified Modified Read Encoding
Modem Speeds: 33600, 31200, 28800, 26400, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400bps
Receive Level: -9dBm ~ -43 dBm
Output Level: Adjustable: -9dBm~-15dBm
Initial Setting: Country Dependent
Line Interface Section
-Modular Plug: RJ-11C
OutBand Signal Level: Guaranteed North American standard and Europe PTT
-Insulation
Resistance
(250VDC)
Tip - Ring: Higher than 5 Meg Ohms
Tip, Ring-GND: Higher than 5 Meg Ohms
Ring Detection: Complies with all regulatory requirements
Dialing Characteristics
Dial Pulse:
Dialing Characteristics
-Dial Pulse
Not Supported
1) DTMF
Coding Format
1209 Hz 1336 Hz 1477 Hz
697 Hz 1 2 3
770 Hz 4 5 6
852 Hz 7 8 9
941 Hz * 0 #
Retry No Answer 1 Additional Retry
(also if not a fax at the far end)
Busy 0 to 9 Additional Tries
(user programmable, factory default is 5)
Frequency 1 to 200 minutes
(user programmable, factory default is 3 minutes)
Fax Features
Block Junk Fax Function/Banned Fax List:
Block Junk Fax Function = Yes.
Blocks junk faxes based on caller ID and remote station ID.
Caller ID Support = Yes
Fax Forwarding:
Incoming faxes may be forwarded to another fax machine, e-mail, FTP, or LDSS. In order to fax to LDSS, LDSS is required.
HalfTone:
Infoprint 1650 MFP does not support 8-bit grayfax.
Max Broadcast Locations:
Maximum Broadcast locations is 400. Note: each number in a group fax is a location.
Group Fax (Broadcasting):
Broadcasting is available on the Infoprint 1650 MFP. It can broadcast to 46 locations (based on 10 digit numbers with a max of 512 characters). This function is supported by Speed Dials (shortcuts) and the touch screen menus for Group Fax (Broadcasting).
Manual Fax:
Manual Fax capability is available on Infoprint 1650 MFP.
Fax from PC:
Fax from PC is supported using Postscript driver for both local and network attach modes.
Fax Shortcuts:
Maximum charactors per shortcut = 512 characters
Speed Dials:
The number of SpeedDials/Shortcuts is greater than 500, based on a 10-digit phone number.
Fax Preservation:
Faxes are preserved over POR on the Infoprint 1650 MFP.
Fax Content:
Text
Text/Photo
Photograph
LDAP Lookup:
LDAP Address Lookup capability on the Infoprint 1650 MFP.
Scan Specific Specifications
Scan Performance
The following table summarizes performance numbers for the Infoprint 1650 MFP.
Scan Speed
-Sides Per Minute (SPM) (Mono Simplex) Letter - 35
A4 - 33
-Sides Per Minute (SPM) (Color Simplex) Letter - 17
A4 - 16
Scan Features
Job Build from Flatbed:
Job Build from Flatbed is not available on the Infoprint 1650 MFP.
Job Build Custom Job from ADF:
Custom Job from ADF is not available on the Infoprint 1650 MFP.
Duplex Scan:
Duplex scan capability is not available on the Infoprint 1650 MFP.
Mono Output Resolution: 600 X 600dpi
Color Output Resolution: 300 X 300dpi
USB and Network TWAIN Drivers:
For a list, see operating systems table
Scan Destinations:
USB Thumbdrive
FTP
LDSS
Scan to PC (Network and USB)
File Formats:
TIFF
JPG or JPEG
Scan Preview
Scan Preview is not available on the Infoprint 1650 MFP.
Supported Compressions:
PDF - 1 bit - JBIG2, CCITT G4, Flate 8/24 bit - Flate, JPEG
TIFF - 1 bit - CCITT G4 8/24 bit - Packbits, LZW
JPG - 8/24 bit - JPEG
Security Features
This product contains several standard and optional features and functions that improve or enhance the security of the device. See User Guide for more information.
Available MFP security features
Apply an administrative password to restrict unauthorized users from making changes to the MFP configuration.
Requires user authentication prior to performing sensitive operations such as scan-to-e-mail and scan-to-fax. This process ensures that unauthorized individuals cannot use these functions.
Disable various device capabilities, including Copy, E-mail, FTP, Fax Send, Fax Receive, and Driver to Fax.
Disable all unneeded protocols and network communication paths by which the MFP can be configured.
Setting security using the Embedded Web Server (EWS)
To enhance the security of network communications and MFP configuration, use the advanced security options. These features are available through the Web page of the MFP.
Setting the system password
Setting the system password protects configuration of the Embedded Web Server. A system password is also required for Secure mode and confidential communication with MVP.
Using the secure Embedded Web Server
The SSL (Secure Sockets Layer) allows for secure connections to the Web server within the print device. To connect to the Embedded Web Server more securely, connect to the SSL port instead of the default HTTP port. The SSL port connection will encrypt all Web server network communications between the PC and MFP.
Supporting SNMPv3 (Simple Network Management Protocol version 3)
SNMPv3 protocol allows for encrypted and authenticated network communications. It also lets the administrator select a desired level of security. Prior to use, at least one user name and password must be established from the settings page. Configure for SNMPv3 through the Embedded Web Server of the MFP.
Supporting IPSec (Internal Protocol Security)
IP Security protocol provides authentication and encryption of communications at the network layer allowing all application and network communications over the IP protocol to be secure. IPSec can be set up between the MFP and up to five hosts, using both IPV4 and IPV6.
Disabling ports and protocols
The TCP and UDP ports can be configured to one of three modes or values:
Disabled - Never allows network connections to this port
Secure and unsecure - Allows the port to remain open, even in Secure mode
Unsecured Only - Allows the port to only open when the MFP is not in Secure mode
Using 802.1x Authentication
802.1x port authentication allows the MFP to join networks that require authentication before allowing access. 802.1x port authentication can be used with the WPA (Wi-Fi Protected Access) feature of an optional internal wireless print server to provide WPA-Enterprise security support.
Support for 802.1x requires the establishment of credentials for the MFP. THe MFP must be known to the Authentication Server (AS). The AS will allow network access to devices presenting a valid set of credentials which typically involves a name/password combination and possibly a certificate. The AS will allow network access to the MFP presenting a valid set of credentials. The credentials can be managed by using the Embedded Web Server of the MFP.
Locking the operator panel menus
Password Protect allows creation of two levels of passwords (Advanced and User) and a choice of specific menus to protect. Each time a locked menu is selected, either at the operator panel or through the Embedded Web Server (EWS), the user is prompted to enter an appropriate password.
Confidential Print Setup
Confidential Print Setup allows the designation of a maximum number of PIN entry attempts and allows setting an expiration time for print jobs. When a user exceeds a specific number of PIN entry attempts, all of the user's print jobs are deleted. When a user has not printed their jobs within a designated time period, the print jobs are deleted.
Using the restricted server list function
The Restricted Server list lets a system support person restrict which hosts are allowed to communicate with the MFP over the network which prevents other hosts from managing and printing to the MFP.
Note: The Restricted Server List only restricts TCP traffic; it does not affect UDP traffic. The Restricted Server List supports up to ten host addresses or ten network addresses.
Digitally Signed Firmware Update Files
Upgraded firmware files from Lexmark are now signed with a digital signature, which verifies the source and authenticity of the updated code. This prevents a malicious user from creating and uploading to the MFP custom code that could intercept and expose potential confidential data.
Printer Specifications
Media Support
Input Media Combinations and Capacities (sheets)
Standard Optional Optional Optional Optional Total
Aux. Tray Drawer 1 Drawer 2 Drawer 3 Drawer 4 Drawer 5 Capacity
--------- -------- -------- -------- -------- -------- --------
Standard 100 500 600
Maximum 100 500 500 500 500 2000 4100
Output Media Capacities (sheets)
Standard Total
Output Bin Capacity
---------- --------
Standard 500 500
Media Sizes Supported
Media Capacity for Infoprint 1650 MFP
Stack
Source Media Height Reference Capacity
--------------------- ---------------- ------ --------------------
Inputs
- 250-Sheet Tray(2)
Plain Paper(1) 25 mm 250 sheets (75 gsm)
Transparencies 225 tranparencies
Paper labels(4) 100 paper labels(3)
- 500-Sheet Tray(2)
Plain Paper(1) 55 mm 500 sheets (75 gsm)
Transparencies 450 tranparencies
Paper labels(4) 200 paper labels(3)
- 2000-Sheet Tray(2)
Plain Paper(1) 212 mm 2000 sheets (75 gsm)
Transparencies NA NA
Paper labels(4) NA NA
- Envelope Feeder (2)
Envelopes 64.7mm 85 envelopes (75 gsm)
- Multipurpose Tray(2)
Plain Paper 10 mm 100 sheets (75 gsm)
Envelopes 10 envelopes (75 gsm)
Paper labels (4) Various quantities
- Scanner ADF Plain paper, other 7.5mm 50 sheets
Output
- 500-sheet Output(1),(2)
Plain Paper 85 mm 500 sheets (75 gsm)
Transparencies 300 tranparencies
Paper labels(4) 200 paper labels(3)
Envelopes 50 envelopes (75 gsm)
Note: (1) 20 lb xerographic paper at ambient environment.
Note: (2) Capacity may vary and is subject to media specs and operating environment.
Note: (3) Capacity will vary with label material and construction.
Note: (4) Occasional paper label use only.
Input Media for Infoprint 1650 MFP
250 1
500- 2000- 250- 400-
Std Sheet Sheet Env. Sheet Sheet
Paper Size & Type MPT Tray Tray Drawer Feed UAT UAT
------------------------ ---- ---- ----- ------ ---- ----- -----
A4 (210x297 mm) Yes Yes Yes Yes No Yes Yes
A5 (148x210 mm) Yes Yes Yes Yes No Yes Yes
B5-JIS (182x257 mm) Yes Yes Yes Yes No Yes Yes
Letter (8.5"x11"] Yes Yes Yes Yes No Yes Yes
Legal (8.5"x14"] Yes Yes Yes Yes No Yes Yes
Executive (7.25"x10.5"] Yes Yes Yes Yes No Yes Yes
Folio (8.5"x13"] Yes Yes Yes No No Yes Yes
Statement (5.5"x8.5"] Yes Yes Yes No No Yes Yes
7 3/4 Env. (98x191 mm) Yes No No No Yes No No
9 Env. (98x225 mm) Yes No No No Yes No No
Commercial #10 Env. Yes No No No Yes No No
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No No No Yes No No
B5 Env. (176x250 mm) Yes No No No Yes No No
DL Env. (110x220 mm) Yes No No No Yes No No
Other Env.(1) Yes No No No Yes No No
Universal(2) No Yes Yes No No No No
Universal(3) Yes No No No No No No
Universal(4) No No No No No No No
Universal(5) No No No No No Yes Yes
Paper Yes Yes Yes Yes No Yes Yes
Transparencies Yes Yes Yes No No Yes Yes
Cardstock Yes Yes Yes No No No No
Paper Labels(6) Yes Yes Yes No No No No
Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).
Note: (2) Size 139.7x210mm to 215.9x355.6mm (5.5x8.27 in. to 8.5x14 in.)
Note: (3) Size 69.85x127mm to 215.9x355.6mm (2.75x5 in. to 8.5x14 in.).
Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
Note: (5) Size 76.2x177.8mm to 215.9x355.6mm (3x7 in. to 8.5x14 in.).
Note: (6) Occasional paper labels printing only.
Output Media for Infoprint 1650 MFP
Std
Out.
Paper Size & Type Dup. Bin
----------------------- ---- --- Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).-
A4 (210x297 mm) Yes Yes
A5 (148x210 mm) Yes Yes
B5-JIS (182x257 mm) Yes Yes
Letter (8.5"x11"] Yes Yes
Legal (8.5"x14"] Yes Yes
Executive (7.25"x10.5"] Yes Yes
Folio (8.5"x13"] Yes Yes
Statement (5.5"x8.5"] No Yes
7 3/4 Env. (98x191 mm) No Yes
9 Env. (98x225 mm) No Yes
Commercial #10 Env. No Yes
(104.8x241.3 mm)
C5 Env. (169x229 mm) No Yes
B5 Env. (176x250 mm) No Yes
DL Env. (110x220 mm) No Yes
Other Env.(1) No Yes
Universal (2) No Yes
Universal (3) No Yes
Universal (4) Yes Yes
Paper Yes Yes
Cardstock Yes Yes
Transparencies No Yes
Paper Labels No Yes
Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).
Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).
Note: (3) Size 69.85x127mm to 215.9x355.6mm (2.75x5 in. to 8.5x14 in.).
Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
Media Type and Weights Supported
Input Media for Infoprint 1650 MFP
2000-Sht Env. Scanner
Print Media MPT & 250-Sht 500-Sheet Tray Drawer Feeder ADF
------------------ ------------- -------------- ---------- ------ -------
Copier/Xerographic 60-135 gsm 60-176 gsm 60-135 gsm No 14-32lb
16-36 lb 16-47 lb 16-36 lb 52-120gsm
Card Stock Upper
Limit grain Long(1)
- Index-Bristol 120 gsm (67lb) 163 gsm (90lb) No No No
- Tag 120 gsm (74lb) 163 gsm (100lb) No No No
- Cover 135 gsm (50lb) 176 gsm (65lb) No No No
Card Stock Upper
Limit grain Short(1)
- Index-Bristol 163 gsm (90lb) 199 gsm (110lb) No No No
- Tag 163 gsm (125lb)203 gsm (125lb) No No No
- Cover 176 gsm (65lb) 216 gsm (80lb) No No No
Transparencies 138-146 gsm 138-146 gsm No No No
37-39 lb 37-39 lb No No No
Labels Upper Limit
- Paper(5) 163 gsm (43lb) 180 gsm (48lb) No No No
Integrated Forms
- Pressure Area (2)140-175 gsm 140-175 gsm No No No
- Paper Base 75-135 gsm 75-135 gsm No No No
20-36 lb 20-36 lb
Envelopes(4) 60-105 gsm No No 60-105 gsm No
(Sulfite, wood-free 16-28lb bond(3) 16-28 lb(4)
or up to 100%
cotton bond)
Note: All media specified in lb is bond.
Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.
Note: (2) Pressure sensitive area must enter the printer first.
Note: (3) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond bond envelopes are limited to 25% cotton content. This spec applies to the MPF tray, not the optional 250-sheet drawer.
Note: (4) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond bond envelopes are limited to 25% cotton content.
Note: (5) Occasional paper label support only.
Additional Media Guidelines
Follow the media guidelines below for successful printing:
Paper
Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
Colored papers must be able to withstand 220 deg C (446 deg F) fusing temperature.
Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with these printers.
Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.
Recycled paper less than 80 gsm may cause unacceptable results.
Envelopes
If envelope wrinkling occurs refer to the User's Guide for correct loading and stacking of envelopes
All envelopes should be new, unused, and without package damage.
Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
Minimum weight: 75 g/m2 (20 lb.)
The following envelopes should not be used:
Envelopes with windows, holes, perforations, cutouts, or deep embossing.
Envelopes with metal clasps, string ties, or metal folding bars.
Envelopes with exposed flap adhesive when the flap is in the closed position.
For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
Under high humidity conditions (over 60%), envelopes may seal during printing.
Transparencies
Use letter or A4-size sheets only.
Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint 1650 MFP.
Labels
Only occasional paper label use is supported.
Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability. VINYL AND POLYESTER LABELS ARE NOT SUPPORTED.
Guidelines for Scanner Document Feeder
The automatic document feeder is designed to handle most paper types. However, the following cannot be properly fed by the automatic document feeder:
- Paper with clip or staple attached
- Paper with ink not totally dry
- Paper with inconsistent thickness, such as envelopes
- Paper with wrinkles, curls, folds or tears
- Tracing paper, coated paper, carbonless paper
- Paper that is too large or too small (use flatbed instead)
- Items other than papers, such as cloth, metal or OHP film
- Notched paper
- Paper with an odd (non-rectangular) shape
- Photographic paper
- Paper with perforations on its side
- Very thin paper
Printer drivers are provided on the Software and Documentation CD that is packaged with the printer. See Publications section for details.
The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.
Supported Operating Systems (Printer & Scan Drivers)
Print Network USB
Driver TWAIN TWAIN
---------------------------------------------------- ------ ------- -----
Apple Macintosh(1)
-Mac OS 9.x Y N N
-Mac OS X (10.2, 10.3, or 10.4) Y Y N
Microsoft Windows(1)
-Microsoft Windows 95 4.00950 (OSR2) or later(3) Y N N
-Microsoft Windows 98.1st Edition(3) Y N N
-Microsoft Windows 98.2nd Edition Y N Y
-Microsoft Windows Me Y N Y
-Microsoft Windows NT 4 SP6 Y N N
-Microsoft Windows NT 4 Server SP6 Y N N
-Microsoft Windows 2000 Professional Y Y Y
-Microsoft Windows 2000 Server Y Y Y
-Microsoft Windows 2000 Advanced Server Y Y Y
-Microsoft Windows 2000 Server running Terminal Serv. Y Y(7) Y(7)
-Microsoft Windows 2000 Server running Terminal Serv. Y Y(7) Y(7) with Citrix MetaFrame XP Presentation Server
-Microsoft Windows 2000 Server running Terminal Serv. Y Y(7) Y(7) with Citrix MetaFrame Presentation Server 3.0
-Microsoft Windows 2000 Server running Terminal Serv. Y Y(7) Y(7) with Citrix MetaFrame Presentation Server 4.0
-Microsoft Windows XP Home Y Y Y
-Microsoft Windows XP Professional Y Y Y
-Microsoft Windows XP Professional x64 Edition Y Y(6) Y
-Microsoft Windows Server 2003 Standard Edition Y Y Y
-Microsoft Windows Server 2003 Enterprise Edition Y Y Y
-Microsoft Windows Server 2003 x64 Standard Edition Y Y(6) Y
-Microsoft Windows Server 2003 x64 Enterprise Edition Y Y(6) Y
-Microsoft Windows Server 2003 Standard Edition Y Y(7) Y(7) running Terminal Server
-Microsoft Windows Server 2003 x64 Enterprise Edition Y Y(6) Y(7) running Terminal Server (7)
-Microsoft Windows Server Enterprise Edition Y Y(7) Y(7) running Terminal Server
-Microsoft Windows Server 2003 running Terminal Server Y Y(7) Y(7) with Citrix MetaFrame XP Presentation Server
-Microsoft Windows Server 2003 running Terminal Server Y Y(7) Y(7) with Citrix MetaFrame Presentation Server 3.0
-Microsoft Windows Server 2003 running Terminal Server Y Y(7) Y(7) with Citrix MetaFrame Presentation Server 4.0
-Microsoft Windows Server 2003 Standard x64 Edition Y Y(6) Y(7) running Ternimal Server with Citrix MetaFrame (7)
Presentation Server 4.0 for Microsoft Windows Server 2003 x64 Edition
-Microsoft Windows Server 2003 Enterprise x64 Edition Y Y(6) Y(7) running Ternimal Server with Citrix MetaFrame (7)
Presentation Server 4.0 for Microsoft Windows Server 2003 x64 Edition
Novell(2)
-Novell NetWare 3.2, 4.2 (bindery) Y N N
-Novell NetWare 4.2, 5.x, 6.x (NDS) Y N N
-Novell NetWare 5.x, 6.x with iPrint or NDPS Y N N
-Novell Open Enterprise Server for NetWare with NDS, Y N N
iPrint or NDPS
Print Network
Driver SANE
---------------------------------------------------- ------ -------
UNIX(3)
-HP UX 11.00, 11.11 Y N
-Sun Solaris SPARC 7, 8, 9, 10 Y N
-Sun Solaris x86 10 Y N
-IBM AIX 5.1, 5.2, 5.3(4) Y N
Linux
-SuSE Linux Enterprise Server 8 Y Y
-SuSE Linux Enterprise Server 9 Y Y
-SuSE Linux Professional 9.1 Y Y
-SuSE Linux Professional 9.2 Y Y
-RedHat Enterprise WS 3 Y Y
-RedHat Enterprise WS 4 Y Y
-Debian GNU/Linux 3.0 Y Y
-Linspire 4.5 Y Y
-Red Flag 4.0 (Simplified Chinese only)(4) Y Y
-Limpus 9.2 (Traditional Chinese only)(4) Y Y
IBM AIX Colon Files
-IBM AIX 4.3.3, 5.1, 5.2, 5.3 Y N
Other
-Virtually any platform supporting TCP/IP (5) Y N
-IBM iSeries and AS/400 Systems with TCP/IP with OS/400 Y N
V3R1 or later, using OS400 Host Print Transform5
-SAP Device Type Support Y N
Note: (1) Download the latest MFP drivers from the IBM Web Site.
Note: (2) IBM Printing Solution is only available from the IBM Web Site.
Note: (3) MFP driver support only. No support for IBM utilities. Driver must be installed using Windows Add Printer Wizard.
Note: (4) Support for these operating systems only available from the IBM Web Site.
Note: (5) Drivers for these operating system not provided by IBM.
Note: (6) Drivers for these operating systems available from the IBM Web Site in 1st half 2006.
Note: (7) TWAIN support in Terminal Server environments requires a Terminal Server-aware TWAIN application.
The Windows software applications, which operate in the operating systems, listed above, are best suited to run with the drivers supplied with the printer. These drivers take advantage of advanced printer functions and increase the printer performance wherever possible.
Management Solutions
MarkVision Professional and MarkVision Messenger are available via the Web at:
www.markvisionprofessional.com.
MarkVision Professional
MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.
MarkVision Messenger
MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.
Software Installation and Distribution Tools
The IBM Script Install utility provides a very powerful method to install or uninstall MFPprinter software in Windows NT 4.0, Windows 2000, Windows XP or Windows Server 2003 environments. Through the use of the Script Install utility, System Administrators can easily perform mass rollouts of IBM printers/MFPs by creating custom scripts to perform local or remote printer/MFP software installations on end user workstations.
When combined with the Driver Profiler utility, I/T shops can centrally create and deploy custom printing environments for each remote location. Together, these utilities drastically reduce the time required to install MFP software in a distributed environment.
Printing Solution for Novell systems
The IBM Printing Solution for Novell systems offers administrators more control over IBM printers/MFPs. This all-inclusive package provides support for both NDPS and iPrint printing systems on NetWare 5.1, 6.0 and 6.5 servers and NOES for NetWare servers. The package consists of Novell's NDPS gateway coupled with IBM's custom control snap-ins for both NetWare Administrator (NWAdmin) and iManager. By offering custom support for both NetWare Administrator and iManager management utilities, this offering allows administrators to take full control of IBM MFPs in a Novell printing environment.
Host Software
Windows Custom Drivers
To maximize the user experience, IBM offers custom PCL emulation and PostScript drivers for Windows systems. Custom drivers for Windows provide the most comprehensive set of printing features available for IBM products. Offering an easy-to-use interface and time saving preset features, the IBM custom drivers allow users to access popular MFP features intuitively.
Windows System Drivers
System drivers for Windows provide users with basic printing capabilities for their IBM printers/MFPs. Built on Microsoft technology, system drivers mix key IBM MFP capabilities with Microsoft's rendering engine to provide a solid, no-frills driver. IBM system drivers are available in PCL emulation and PostScript versions. PostScript versions.
MFP Drivers for UNIX and Linux systems
IBM MFP/printer drivers reduce the complications of printing in UNIX and Linux environments. Built on the LPRng printing system, the IBM printer/MFP drivers provide fully scriptable command-line options. When running in X-Windows mode, IBM MFP drivers make it easy to access many popular MFP features without memorizing command line options through a GUI interface.
Printing Software for Macintosh
IBM offers Mac OS printing software (PPDs, PDEs, etc.) to provide a first rate printing experience in an Apple environment. These files allow Mac OS 9 and Mac OS X users access to advanced printing features included with the IBM product. Status Window complements the driver software by providing printer status feedback from a remote location. Other utilities such as File Downloader and IP Settings Utility provide efficient means to perform targeted tasks.
Network TWAIN Scan Drivers
IBM Network TWAIN scan drivers provide remote scanning capabilities to Windows and Macintosh computers. IBM provides Network SANE drivers with remote scanning capabilities for Linux workstations. These drivers allow TWAIN (or SANE) compatible applications to acquire raw scan data directly from a networked IBM multi-function printer.
USB Scan Drivers
The Infoprint 1650 MFP includes USB TWAIN data source and a Windows Imaging Architecture (WIA) scan driver. USB TWAIN for Windows offers MFP-to-host scanning capabilities to take full advantage of TWAIN compatible applications. WIA driver for Windows XP and Windows Server 2003 provides direct scanning capabilities to applications supporting Microsoft's imaging architecture.
IBM Infoprint Manager
Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.
Network Printer Resource Utility (NPRU)
NPRU will not support the Infoprint 1650 MFP
TCP/IP Network Port Monitor Utility
This utility will not support the Infoprint 1650 MFP
LPR Remote Printing Client Utility
This utility will not support the Infoprint 1650 MFP
Physical Specifications
Dimensions
Width Depth Height Weight(1)
Infoprint 1650
--------- --------- --------- ---------
MFP 560.0 mm 645.0 mm 710.0 mm 36.3 kg
(no options) (22.0 in) (25.4 in) (28.0 in) (80.0 lb)
Options
Width Depth Height Weight(1)
--------- --------- --------- ---------
500-Sheet Duplex 398.0 mm 613.0 mm 54.0 mm 5.1 kg
Unit (15.6 in) (24.1 in) (2.13 in) (11.3 lb)
500-Sheet Drawer 398.0 mm 520.0 mm 134.0 mm 3.2 kg
(15.6 in) (20.5 in) (5.3 in) (7.0 lb)
250-Sheet Drawer 398.0 mm 495.0 mm 90.0 mm 2.7 kg
(15.6 in) (19.5 in) (3.5 in) (6.0 lb)
2000-Sheet Drawer 398.0 mm 495.0 mm 388.6 mm 14.1 kg
(15.6 in) (19.5 in) (15.6 in) (31.0 lb)
Envelope Option (2) 312.0 mm (2) 4.0 kg
(12.28 in) (1.8 lb)
MFP Stand with 569.0 mm 622.0 mm 800.0 mm 29.0 kg
Cabinet (22.4 in) (24.5 in) (31.5 in) (64.0 lb)
Low Profile MFP 569.0 mm 622.0 mm 579.0 mm 20.4 kg
Stand (22.4 in) (24.5 in) (22.8 in) (45.0 lb)
MFP Stand w/o 569.0 mm 622.0 mm 800.0 mm 28.1 kg
Cabinet (22.4 in) (24.5 in) (31.5 in) (62.0 lb)
Caster Base 686.0 mm 686.0 mm 152.0 mm 11.3 kg
(27.0 in) (27.0 in) (6.0 in) (25.0 lb)
Large Spacer 397.6 mm 445.7 mm 255.0 mm 7.8 kg
(15.7 in) (17.54 in) (10.04 in) (17.1 lb)
Note: (1) Weights for low-voltage and high-voltage models are the same.
Note: (2) Envelope feature fits within height and width of MFP.
Recommended clearances
Left Right Front Rear Top
All models --------- -------- -------- -------- ---------
304.8 mm 203.2 mm 508.0 mm 203.2 mm 304.8 mm
(12.0 in) (8.0 in) (20.0 in) (8.0 in) (12.0 in)
Operating Environment
Operating Environment:
Temperature: 16.0 to 32.0 C (60 to 90 F)
Relative humidity: 8 to 80%
Altitude: 0 to 3,048 meters (10,000 ft)
Storage and shipping environment (packed):
Temperature: -40.0 to 43.3 C (-40 to 110 F)
Relative humidity: 5 to 95%
Altitude: 0.25 atmospheric pressure (equivalent to 10,300 m, 34,000 ft)
Storage environment (unpacked):
Temperature: 0 to 40.0 C (32 to 104 F)
Relative humidity: 5 to 80%
Electrical specifications
Low-voltage models:
100 - 127 VAC at 50 to 60 Hz, nominal
90 - 137 VAC, extreme
High-voltage models
220 - 240 VAC at 50 to 60 Hz, nominal
198 - 259 VAC, extreme
Average power consumption
Printing states All Models
------------------------------ ----------
Off 0 W
Power Saver Mode 30 W
Standby Mode 105 W
Continuous Copying 650 W
Continuous Printing 800 W
Maximum Current while printing
120 Volts 10.5 A
230 Volts 5.4 A
Average Current while printing
120 Volts 8.0 A
230 Volts 4.4 A
Note: Using a 220 VAC to 110 VAC power converter with the low voltage model is not recommended.
Note: All models are ENERGY STAR compliant.
Acoustics
All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
All models:
Bystander Position Measured Sound
Mode Average (LpAm) Power Level Bels
------------------- ------------------ ----------------
Printing 56 7.0
Copying 57 7.2
Scanning 52 6.8
Ready 30 4.6
Special Feature Codes -- Chargeable
Mach Feature Part
type Model number number Description UPC
---- ----- ------- ------- -------------------------- ---------------
4544 011 39V1382 Infoprint 1650 MFP NA (LV)
4544 x11 39V1572 Infoprint 1650 MFP Express
39V1588 Bar Code Card
39V1589 Decryption Card
39V0318 400-Sheet Universal Adj. Tray
39V0319 400-Sheet Universal Adj. Drawer
39V0320 250-Sheet Universal Adj. Tray
39V0321 250-Sheet Universal Adj. Drawer
ServicePacs
Machine Electronic
type Model Description part number
------- ----- ------------------------- -----------
4544 All SVCPAC PTR 2YR IOR 9X5/ND 42V1650
4544 All SVCPAC PTR 3YR IOR 9X5/ND 42V1651
4544 All SVCPAC PTR 1YR IOR 24X7/SD 42V1652
4544 All SVCPAC PTR 2YR IOR 24X7/SD 42V1653
4544 All SVCPAC PTR 3YR IOR 24X7/SD 42V1654
4544 All SPACMA PTR 1YR IOR 9X5/ND 42V1655
4544 All SPACMA PTR 1YR IOR 24X7/SD 42V1656
4544 All SPACMA PTR 2YR IOR 9X5/ND 42V1657
4544 All SPACMA PTR 2YR IOR 24X7/SD 42V1658
Printer Features
All printer features are customer installable.
Input, Output and Other Media Features
The Infoprint 1650 MFP media features include:
(P/N 39V0213) 250-Sheet Drawer
Minimum required = 0, maximum allowed = 4
Prerequisite = none, Co-requisite = none
This input option can be installed beneath the printer to offer an added input source which holds approximately 250 sheets of 20 lb. Paper. Multiple optional drawers are supported simultaneously.
(P/N 39V0214) 500-Sheet Drawer
Minimum required = 0, maximum allowed = 4
Prerequisite = none, Co-requisite = none
This optional input source installs beneath the printer, and it holds approximately 500 sheets of (20 lb.) paper. Multiple optional drawers are supported simultaneously. This feature is standard with models.
(P/N 39V0215) 2,000-Sheet Drawer for Letter
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of letter (20 lb.) paper.
(P/N 39V0216) 2,000-Sheet Drawer for A4
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of A4 (20 lb.) paper.
(P/N 39V0317) 500-Sheet Tray
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 500 sheets of (20 lb.) paper.
(P/N 39V0217) 500-Sheet Duplex Unit
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This option offers two-sided printing capability. The duplex unit is standard with the models that begin with "d".
(P/N 39V0219) Envelope Feeder
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
Although occasional envelope printing is supported through the printer's multi-purpose tray, this option is available for more frequent envelope printing. It holds up to 85 envelopes.
(P/N 39V0320) 250-sheet Universally Adjustable Tray (UAT)
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
This tray supports a range of narrow media not supported by the standard paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 250-sheet UAT is 3x7 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.
(P/N 39V0318) 400-sheet Universally Adjustable Tray (UAT)
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
This tray supports a range of narrow media not supported by the standard paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x7 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 500-sheet integrated tray in the appropriate base printer.
(P/N 39V0321) 250-sheet Universally Adjustable Drawer
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 250-sheet UAT is 3x7 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.
(P/N 39V0319) 400-sheet Universally Adjustable Drawer
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x7 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 500-sheet integrated tray in the appropriate base printer.
Memory and Flash Memory Features
The Infoprint 1650 MFP has one slot for memory DIMMs and two slots for flash memory cards and application solution cards. Only one flash memory card is allowed.
The memory features include the following SDRAM features:
(P/N 75P6986) 128 MB Memory DIMM
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
(P/N 75P6987) 256 MB Memory DIMM
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
(P/N 75P6988) 512 MB Memory DIMM
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
The flash memory features include:
(P/N 75P6989) 32 MB Flash Card
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
(P/N 75P6990) 64 MB Flash Card
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
Connection Features
In addition to the standard USB port and standard parallel port, each Infoprint 1650 MFP has one slot for internal print servers, or optional local connections.
Internal Local Connection Features
The following local connection options are supported:
(P/N 39V0327) Parallel 1284-B Interface Card
Minimum required = 0, maximum allowed = 1
Prerequisite = network model, Co-requisite = none
This card provides a IEEE 1284-B parallel port.
(P/N 39V0326) RS-232C Serial Interface Card
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This card provides an RS-232C serial port.
Cable Features
(P/N 75P7029) 10 Ft. Parallel Cable
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
For parallel attachment, this cable is recommended for ten feet or less and may be ordered by the customer.
(P/N 75P7030) 2-meter USB Cable
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
For USB attachment, this USB cable is recommended and may be ordered by the customer.
Network Connection Features
Network cards plug into the one internal interface adapter slot.
Network Cards for Internal Print Server Features
(P/N 75P6992) Ethernet 1000BaseTX
Minimum required = 0, maximum allowed = 1
Prerequisite = base model, Co-requisite = none
This internal Ethernet adapter supports the Gigabit Ethernet standard over CAT-5 cabling.
External Network Cards
(P/N 39V1524) Ethernet 10BaseT/100BaseTX (1 USB port)
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This external print server has one USB port to connect to an Ethernet 10BaseT/100BaseTX network.
(P/N 39V1525) Ethernet 1000BaseTX (4 USB ports)
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This external print server has four USB ports to connect up to four printers to an Ethernet 1000BaseTX network.
(P/N 39V1526) Ethernet 10BaseT/100BaseTX (1 parallel port)
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This external print server has one parallel port to connect to an Ethernet 10BaseT/100BaseTX network.
(P/N 75P6857) 802.11G Wireless To Ethernet (U.S. and Canada)
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite =none
This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11g wireless standard. This standard operates at speeds of up to 54 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building contruction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.
The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.
(P/N 75P6854) 802.11G Wireless To USB (U.S. and Canada)
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite =none
This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11g wireless standard. This standard operates at speeds of up to 54 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building contruction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device. This does not support scan to network or scan to PC functions.
The feature is an external adapter that connects to the USB port on the printer.
Network Compatibility
The internal and external network adapters support Network Plug and Print 2.0 on Windows NT 4.0 and Windows 2000 systems.
The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:
TCP/IP
Novell (IPX/SPX including NetWare Directory Services)
AppleTalk**
LexLink** (DLC/LLC)
The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:
IPP: Internet Printing Protocol
SLP: Service Location Protocol
NTP: Network Timing Protocol
The printer with standard Ethernet internal print servers and external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.
The remote operator panel is available from internal and external print servers.
Applications Solutions
(P/N 39V1588) Bar Code Card
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
The Bar Code Card Card enables the Infoprint 1650 MFP to print more than forty seven of the most popular industry standard bar codes, including Datamatrix, QR Code, Aztec, microPDF417, PLANET, Codablock F, ITF14, and HIBC128. The Bar Code Card card generates bar codes algorithmically for improved readability.
The Bar Code Card Card emulates HP MFPsprinters with an HP BarCodes 1 More font solution, JetCAPS BarDIMM or JetCAPS BarSIMM (v. 2.0b).
(PN 39V1589) Decryption Card
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none
This feature is installed in the flash memory/applications solutions slots.
The Decryption feature allows an equipped printer to receive and decrypt print jobs that have been encrypted using the decryption software on compatible client operating systems. Decryption supports AES encryption using key and block lengths of 128, 192, and 256 bits, providing robust security for sensitive documents. Decryption also supports the use of Session or dynamic encryption keys, which greatly reduces management overhead. Session keys are automatically and randomly generated with each print job, ensuring that a unique key is applied to each print job. For more information, please refer to the Decryption documentation.
Furniture Features
(P/N 39V1291) Caster Base
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
This feature includes casters to move the Infoprint 1570 MFP easily.
(P/N 39V1292) Large Spacer
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
This feature is used to raise the level of the Infoprint 1650 MFP when additional height is needed to better access the paper input options. It provides approximately 10 inches additional height. It also provides storage space for print and MFP supplies.
(P/N 53P7951) T Printer Stand Feature
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
T/spanhe standard printer stand (without cabinet) is a solution for an office environment where the user desires a printer at approximately table height. It is solid grey in color.
(P/N 53P7952) T Low-Profile Printer Stand Feature
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
The low-profile printer stand is targeted for an office environment where:
The printer is usually accessed by a user who is sitting down (for example directly behind a desk), or
Reduced access height to the printer and output options is desired, or
It's required to meet ADA needs.
It is solid grey in color.
(P/N 53P7950) T Printer Stand with Cabinet Feature
Minimum required = 0, maximum allowed = no maximum
Prerequisite = none, Co-requisite = none
The standard printer stand with cabinet is targeted for an environment where:
the user desires the printer to reside approximately at table height, or
An increased height is desired for input option access, or
A storage bin is desired.
(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited. IBM Corporation 2006.