Real inventory that we refurbish and stand behind, since 1985.

Attention Dealers and Repeat customers:

Discounts may be available based on your log-in. Call or Email for information.

We hold a huge inventory and are in a position to present a fair market price. Other dealers compete against this, so:

Call the REAL source!

Want to use your own freight account for shipping? Please call so we can set it up for you.

IBM Infoprint 1226 (4526)

 
 
 
 


ImageParts
4526-001 53P7830 Infoprint 12264526 TN1 53P7831 Infoprint 1226tn



IBM 4526-TN1 Infoprint 1226TN
Fully refurbished with 90-day warranty
4526-TN1 53p7831



IBM Infoprint 1226 - Cost-Effective Printing for Up to A3/Ledger Media

Toner Cartridge
IBM 53P7582 Toner Cartridge
New
53P7582 12,000 page yield (New)
$190.00


Usage Kit

39V2629 Usage Kit (low volt)
New
39V2629 (New)
$544.00


4501
53P7812 250 Sheet Drawer For IP 1226
Fully refurbished with 90-day warranty
53P7812


4502
53P7813 500 Sheet Drawer with Tray
New
53P7813 (New)
$299.00



53P7813 500 Sheet Drawer For IP 1226
Fully refurbished with 90-day warranty
53P7813


4402

53P7815 Duplexer
Fully refurbished with 90-day warranty
53p7815


4820
53P7820 IPDS/SCS/TNE For IP 1226
New
53P7820 (New)
$125.00



53P7820 IPDS/SCS/TNE For IP 1226
Fully refurbished with 90-day warranty
53P7820
$114.00


4821 53P7821 ImageQuick Card
4870 53P7822 Bar Code Card
4308
53P7601 8MB Memory DIMM
Fully refurbished with 90-day warranty
53P7601
$16.00


4316
53P7602 IBM Brand 16 MB Memory DIMM
New
53P7602 (New)
$29.00



53P7602 IBM Brand 16 MB Memory DIMM
Fully refurbished with 90-day warranty
53P7602
$19.00


4332
53P7603 IBM Brand 32MB Memory DIMM
Fully refurbished with 90-day warranty
53P7603
$20.00


4364
53P7604 64MB Memory DIMM
New
53P7604 Compatible (New)
$39.00



53P7604 64MB Memory DIMM
Fully refurbished with 90-day warranty
53p7604
$47.00


4390
53P7605 IBM Brand 128MB Memory DIMM
New
53P7605 (New)
$99.00



53P7605 128MB Memory DIMM
Fully refurbished with 90-day warranty
53p7605
$69.00


4030
28P1853 2 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1853
$25.00


4032
28P1854 4 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1854
$124.00


4034
28P1855 8 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1855
$148.00


4036
28P1856 16MB Flash DIMM
New
28p1856 (New)
$69.00


4329
28P1858 5GB+ Hard Drive w/ Adapter
Fully refurbished with 90-day warranty
28P1858
$48.00




4873
28P1864 Optra Forms 2MB Flash DIMM
Fully refurbished with 90-day warranty
28p1864
$223.00


4874
28P1865 4MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1865
$247.00


4875
28P1866 8MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1866
$247.00


4876
28P1867 16MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1867
$427.00


4877
4871
28P1862 Optra Forms Software
New
28P1862 (New)
$434.00


4872
28P1863 Optra Forms Director Software
New
28P1863 (New)
$789.00


4878 28P1869 Optra Forms 2-Key Security
4879 28P1870 Optra Forms 3-Key Security
4880 53P9307 Optra Forms Manager
4168
53P9344 Fiber Print Server SC
New
53P9344 (New)
$464.00


4169
53P9346 Fiber Print Server MTRJ
New
53P9346 (New)
$464.00


4136
53P9353 Parallel Card and 1284-C Cable
Fully refurbished with 90-day warranty
53P9353


4137
53p9585 Parallel Card and C-B Adapter
New
53p9585 (New)
$79.00


4135
53P9584 Parallel 1284 C-B adapter
New
53P9584 (New)
$95.00


4133
4132
28P1845 External Serial Attachment
Fully refurbished with 90-day warranty
28P1845
$95.00


4141
28p1842 Coax/Twinax Adapter
Fully refurbished with 90-day warranty
28P1842
$237.00


4120
28P1835 Token Ring
Fully refurbished with 90-day warranty
28P1835
$124.00


4121
28P1836 Token-Ring-3 Port
New
28P1836 (New)
$285.00


4163
28P1839 Ethernet 10/100BaseTX-1 Port
Fully refurbished with 90-day warranty
28P1839
$266.00


4162
28p1838 10/100 Ethernet for IBM InfoPrint
Fully refurbished with 90-day warranty
28P1838
$148.00


4161
28P1837 10BaseT/2
Fully refurbished with 90-day warranty
28P1837


4164

4165
28P1841 Ethernet 10/100TX/10Base2 1 Pt
New
28P1841 (New)
$223.00


4180
28P1871 10 ft. Parallel Cable 1284
Fully refurbished with 90-day warranty
28p1871
$19.00


4181 28P1872 20 ft. Parallel Cable
4183 28P1874 50 ft. Serial Cable
4182
28P1873 Parallel 1284 A-C Cable 3M
Fully refurbished with 90-day warranty
28P1873


4184
28P1875 IBM USB 2 Meter Cable
New
28P1875 (New)
$10.00


The IBM 4526 Infoprint 1226 is a 26 page-per-minute monochrome laser printer specializing in performing complex applications for small and medium-size workgroups. It is ideal for applications requiring support for larger sizes of paper, such as A3 and ledger sizes.

Model Abstract 4526-001

The IBM 4526 Infoprint 1226 Model 001 is a low-voltage base model monochrome laser printer with 16 MB of memory, one 250-sheet drawer (standard) 150-sheet auxiliary tray, input capacity of 400 sheets, output capacity of 250 sheets, Ethernet and Token-Ring networking capabilities, USB and parallel interfaces (standard), and language support.

Model Abstract 4526-TN1

The IBM 4526 Infoprint 1226 Model TN1 is a low-voltage network model monochrome laser printer with 32 MB of memory, two 250-sheet drawer (standard) 150-sheet auxiliary tray, input capacity of 650 sheets, output capacity of 250 sheets, 10/100BaseTX Fast Ethernet (standard), USB and parallel interfaces (standard), and language support.

Highlights
The IBM Infoprint 1226 is IBM's value leader for large format paper including A3/Ledger requirements. It features 26 pages-per-minute, fast first page out time, and excellent print quality in a very small footprint.

Perfect for small and medium-size workgroups, its benefits include:
High-speed desktop laser printer
Fast first page out time as fast as 8 seconds
Fast Ethernet and Token-Ring networking capability
Universal Serial Bus (USB) and Parallel interfaces standard

Description

Customers who print documents with very small font sizes just to fit all critical data on one page will find this printer essential to their business because it enables the same data to fit on a larger page in a bigger font size or enables users to simply place more data on a page.

The most popular networking options are available, including Fast Ethernet 10/100 BaseTX and Token-Ring. The Infoprint 1226 also supports Intelligent Printer Data Stream (IPDS). With its overall fast speed and quick first page out time as fast as 8 seconds, this printer is a winner with workgroups that require versatility and performance.

The Infoprint 1226 is a monochrome laser printer that supports up to A3/Ledger size media at up to 26 pages-per-minute.

Base Models

The base models come with 16 MB of memory, 150-sheet auxiliary tray, and a 250-sheet drawer as standard. Standard input capacity is 400 sheets and output capacity is 250 sheets. Model 001 is the low-voltage model and 002 is the high-voltage model.

Network Models

The network models come with 32 MB of memory, 150-sheet auxiliary tray, two 250-sheet drawers, and 10/100BaseTX Fast Ethernet as standard. Standard input capacity is 650 sheets and output capacity is 250 sheets. Model TN1 is the low-voltage model and TN2 is the high-voltage model.

Media Handling Features

The Infoprint 1226 has the following media handling options:

250-sheet drawer, 500-sheet drawer (Letter), and 500-sheet drawer (A4) options are available. The printer supports up to three drawers total for a maximum input capacity of 1,400 sheets.

Duplex option for two-sided printing is available.

High Performance Controller

The Infoprint 1226 controller features a 300 MHz RISC processor and a 100 MHz internal data bus. It comes with PostScript 3 emulation and PCL 6 emulation as standard data streams.

Memory:

The controller has two slots for memory DIMMs and flash memory DIMMS.

The base models come with 16 MB of memory soldered onboard and can support a maximum of 272 MB of memory with two 128 MB DIMMs installed. The network models come with 32 MB of memory soldered onboard and can support a maximum of 288 MB of memory with two 128 MB DIMMs installed.

Flash memory up to 16 MB is support using the flash memory DIMMS. Flash memory DIMMs can be installed in either memory slot but the controller only supports one flash DIMM installed.

Printer System Attachment Interfaces:

The base models come with an IEEE 1284 Parallel interface with a type B connector and a Universal Serial Bus (USB) interface as standard.

The network models come with a USB interface and a 10/100BaseTX Fast Ethernet interface as standard.

The controller has one interface slot for local connection feature, internal print server feature or hard disk feature.

Usage Rates

The maximum monthly usage is 65,000 impressions. IBM does not recommend printing to the monthly maximum on a consistent basis.

Print Quality

The default resolution of the printer is 600 x 600 dpi and the following print quality modes are supported:
1200 Image Quality (2 bits per pixel)
600 dpi (1 bit per pixel)
300 dpi (1 bit per pixel)

The Toner Darkness setting offers ten user selectable settings to balance print darkness and toner savings. The higher the setting, the darker the print. Within the range of print darkness settings, up to 30% toner savings can be realized from the factory default setting of 8. The toner darkness setting is available through the operator panel under the "Print Quality" menu.

Font Support

The printer's resident fonts include support for following:

Emulation Number of Scalable Fonts Number of Bitmapped Fonts
------------ ------------------------ -------------------------
PCL 6 84 2
PostScript 2 156 0

Accessibility by People with Disabilities

For Hardware Offerings

The following features support use by people with disabilities:

Controls and latches operable with one hand and minimal dexterity.

Keys are discernible by touch without activating them.

The display, controls, latches, and levers are accessible to someone in a wheel chair.

Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.

Model Summary Matrix

Drawer Capacity (Input) Total
Model ----------------------- Output
Model Voltage Type Memory Standard Auxiliary Capacity
----- ------- ------- ------ ----------- ----------- ----------
001 Low Base 16 MB 1x250-sheet 1x150-sheet 400 sheets
TN1 Low Network 32 MB 2x250-sheet 1x150-sheet 650 sheets

Performance Specifications

The Infoprint 1226 maximum print speeds are shown in the following table. Actual performance depends on:
Interface to the host (serial, parallel, network)
Host system and application
Network complexity and traffic
Page complexity and content
Certain printer options installed and selected
Printer memory
Printer resolution
Media size, media type setting and tray source

Continuous Print Speeds (in pages-per-minute) are shown in the following table:

Media Speed
------------------- ---------
A5 (LEF)(1) 26.4 ppm
B5 (LEF) 26.4 ppm
A4 (LEF) 26.4 ppm
Letter (LEF) 25.8 ppm
Legal 13 18.3 ppm
Legal 14 17.2 ppm
B4 16.8 ppm
A3 14.5 ppm
Postcard (LEF) 15.0 ppm
Envelope Yokei #4 15.0 ppm
(105 x 235 mm LEF)
Monarch (LEF) 16.0 ppm

Note: (1) LEF = Long Edge First.

Duplex speeds (in pages-per-minute) are shown in the following table:

Single Page Multi-page
Media Mode Productivity Batch Mode Productivity
------------ ----------- ------------ ---------- ------------
A5 (LEF)(1) 14.1 ppm 53.5 % 20.5 ppm 77.6 %
B5 (LEF) 13.6 ppm 51.4 % 19.9 ppm 75.3 %
A4 (LEF) 12.9 ppm 48.8 % 19.2 ppm 72.5 %
Letter (LEF) 12.8 ppm 49.4 % 18.9 ppm 73.4 %
Legal 13 10.6 ppm 58.0 % -- --
Legal 14 10.2 ppm 59.4 % -- --
B4 10.1 ppm 60.2 % -- --
A3 9.4 ppm 64.6 % -- --

Note: (1) LEF = Long Edge First.

Time to First Print values are shown in the following table:

Cold Start Standby Mode
Media Front Tray Front Tray
-------------------- ---------- ------------
A5 (LEF)(1) 13.5 sec 6.0 sec
B5 (LEF) 13.8 sec 6.3 sec
A4 (LEF) 14.0 sec 6.5 sec
Letter (LEF) 14.1 sec 6.6 sec
Legal 13 15.0 sec 7.5 sec
Legal 14 15.2 sec 7.7 sec
B4 15.3 sec 7.8 sec
A3 15.8 sec 8.3 sec
Postcard (LEF) 21.0 sec 15.0 sec
Envelope Yokei #4 21.0 sec 15.0 sec
(105 x 235 mm LEF)
Monarch (LEF) 21.0 sec 15.0 sec

Note: (1) LEF = Long Edge First.

Time to First Print values from other sources are shown in the following table:

Input Source Time (seconds)
--------------------------- --------------
Auxiliary Tray 8.0
Tray 1 (250-sheet standard) 8.0
Tray 2 (500-sheet feeder) 8.1
Tray 3 (500-sheet feeder) 8.3

Note: Time to first print is defined as the elapsed time when the print engine receives the Start Command from the printer controller to when the trailing edge of the first sheet exits the printer's exit feed rollers into the output bin. All measurements are with letter size paper, long-edge-feed and standby mode.

Print Quality

General Statement on Print Quality

During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure high quality printing and good performance throughout the life of the printer.

Data Streams

The Infoprint 1226 supports the following data streams:
PostScript Level 3 Emulation
PCL 6 Emulation
PPDS (Page Printer Data Stream) Migration Tool
Optional IPDS (Intelligent Printer Data Stream)

Fonts

Fonts and Symbol Sets

The Infoprint 1226 includes international font support. The printer's resident fonts include support for languages that use the following character sets:
Latin 1 (US, Western Europe, etc)
Latin 2 (Eastern Europe)
Latin 5 (Turkish)
Latin 6 (Baltic)
Cyrillic
Greek
Japanese

There are 83 symbol sets in the PCL 6 emulation to support all the languages that use these characters. The symbol set names are listed below. Not all symbol sets are supported by all fonts. Refer to the Technical Reference manual or use the printer operator panel to find which symbol sets are supported by each font.

The Infoprint 1226 will have UTF-8 code support standard. UTF-8 code is a particular way in which fonts are accessed. UTF-8 code is a particular way in which fonts are accessed. UTF-8 is available for PCL and PostScript fonts.

The following table lists the number of fonts available in each emulation. The typeface names are shown below.

Emulation # of Scalable Fonts # of Bitmapped Fonts
------------ ------------------- --------------------
PCL 6 84 2
PostScript 2 156 0

The fonts in the PCL emulation are compatible with the fonts in the HP8550**. The PCL fonts also include four additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with Adobe PostScript 3 and include 20 additional fonts above and beyond the Adobe PostScript 3 fonts.

Additional fonts can be downloaded to the printer RAM or optional Flash DIMM or Hard Disk. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts, and PPDS emulation supports only downloadable bitmapped fonts. Font cards and font cartridges are not supported.

Included on the CD-ROM shipped with the printer are extra Hebrew and Arabic downloadable fonts. Also included on the CD-ROM is the FontVision Font Management utility and screen fonts to match the resident scalable fonts.

PostScript 3 Fonts

Note: Font order is partially alphabetical and partially functional.

156 scalable fonts:

AlbertusMT
AlbertusMT-Italic
AlbertusMT-Light
AntiqueOlive-Roman
AntiqueOlive-Italic
AntiqueOlive-Bold
AntiqueOlive-Compact
ArialMT
Arial-ItalicMT
Arial-BoldMT
Arial-BoldItalicMT
AvantGarde-Book
AvantGarde-BookOblique
AvantGarde-Demi
AvantGarde-DemiOblique
Bookman-Light
Bookman-LightItalic
Bookman-Demi
Bookman-DemiItalic
Coronet-Regular
Courier
CourierPS
Courier
Courier-Oblique
Courier-Bold
Courier-BoldOblique
CourierPS Bold Oblique
Courier-BoldOblique
Garamond-Antiqua
Garamond Halbfett
Garamond-Kursiv
Garamond-KursivHalbfett
Helvetica-Light
Helvetica-LightOblique
Helvetica-Black
Helvetica-BlackOblique
Helvetica
Helvetica-Oblique
Helvetica-Bold
Helvetica-BoldOblique
Helvetica-Narrow
Helvetica-Narrow-Oblique
Helvetica-Narrow-Bold
Helvetica-Narrow-BoldOblique
Intl-CG-Times
Intl-CG-Times-Italic
Intl-CG-Times-Bold
Intl-CG-Times-BoldItalic
Intl-Univers-Medium
Intl-Univers-MediumItalic
Intl-Univers-Bold
Intl-Univers-BoldItalic
Intl-Courier
Intl-Courier-Oblique
Intl-Courier-Bold
Intl-Courier-BoldOblique
LetterGothic
LetterGothic-Slanted
LetterGothic-Bold
LetterGothic-BoldSlanted
Marigold
NewCenturySchlbk-Roman
NewCenturySchlbk-Italic
NewCenturySchlbk-Bold
NewCenturySchlbk-BoldItalic
Optima
Optima-Bold
Optima-BoldItalic
Optima-Italic
Palatino-Roman
Palatino-Italic
Palatino-Bold
Palatino-BoldItalic
Symbol
Times-Roman
Times-Italic
Times-Bold
Times-BoldItalic
TimesNewRomanPSMT
TimesNewRomanPS-ItalicMT
TimesNewRomanPS-BoldMT
TimesNewRomanPS-BoldItalicMT
Univers
Univers-Oblique
Univers-Bold
Univers-BoldOblique
Univers-Condensed
Univers-CondensedOblique
Univers-CondensedBold
Univers-CondensedBoldOblique
Wingdings-Regular
ZapfChancery-MediumItalic
ZapfDingbats
Univers-Extended
Univers-ExtendedObl
Univers-BoldExt
Univers-BoldExtObl
Univers-Light
Univers-LightOblique
Clarendon
Clarendon-Light
Clarendon-Bold
Helvetica-Condensed
Helvetica-Condensed-Bold
Helvetica-Condensed-BoldObl
Helvetica-Condensed-Oblique
StempelGaramond-Bold
StempelGaramond-BoldItalic
StempelGaramond-Italic
StempelGaramond-Roman
Apple-Chancery
Chicago
Geneva
Monaco
NewYork
Oxford
Taffy
MonaLisa-Recut
Candid
Bodoni
Bodoni-Italic
Bodoni-Bold
Bodoni-BoldItalic
Bodoni-Poster
Bodoni-PosterCompressed
CooperBlack
CooperBlack-Italic
Copperplate-ThirtyTwoBC
Copperplate-ThirtyThreeBC
Eurostile
Eurostile-Bold
Eurostile-ExtendedTwo
Eurostile-BoldExtendedTwo
GillSans
GillSans-Italic
GillSans-Bold
GillSans-BoldItalic
GillSans-Condensed
GillSans-BoldCondensed
GillSans-Light
GillSans-LightItalic
GillSans-ExtraBold
Goudy
Goudy-Italic
Goudy-Bold
Goudy-BoldItalic
Goudy-ExtraBold
HoeflerText-Regular
HoeflerText-Italic
HoeflerText-Black
HoeflerText-BlackItalic
HoeflerText-Ornaments
JoannaMT
JoannaMT-Italic
JoannaMT-Bold
JoannaMT-BoldItalic
LubalinGraph-Book
LubalinGraph-BookOblique
LubalinGraph-Demi
LubalinGraph-DemiOblique

PCL 6 Fonts

Note: Font order is partially alphabetical and partially functional.

84 scalable fonts:

Albertus Medium
Albertus Extra Bold
Antique Olive
Antique Olive Italic
Antique Olive Bold
Arial
Arial Italic
Arial Bold
Arial Bold Italic
ITC Avant Garde Book
ITC Avant Garde Book Oblique
ITC Avant Garde Demi
ITC Avant Garde Demi Oblique
ITC Bookman Light
ITC Bookman Light Italic
ITC Bookman Demi
ITC Bookman Demi Italic
Clarendon Condensed Bold
Coronet
CourierPS
CourierPS Oblique
CourierPS Bold
CourierPS Bold Oblique
CG Omega
CG Omega Bold
CG Omega Italic
CG Omega Bold Italic
Garamond Antiqua
Garamond Halbfett
Garamond Kursiv
Garamond Kursiv Halbfett
Helvetica Light
Helvetica Light Oblique
Helvetica Black
Helvetica Black Oblique
Helvetica
Helvetica Italic
Helvetica Bold
Helvetica Bold Italic
Helvetica Narrow
Helvetica Narrow Italic
Helvetica Narrow Bold
Helvetica Narrow Bold Italic
CG Times
CG Times Italic
CG Times Bold
CG Times Bold Italic
Univers Medium
Univers Medium Italic
Univers Bold
Univers Bold Italic
Courier
Courier Italic
Courier Bold
Courier Bold Italic
Letter Gothic
Letter Gothic Italic
Letter Gothic Bold
Marigold
Century Schoolbook Roman
Century Schoolbook Italic
Century Schoolbook Bold
Century Schoolbook Bold Italic
Palatino Roman
Palatino Italic
Palatino Bold
Palatino Bold Italic
SymbolPS
Symbol
Times Roman
Times Italic
Times Bold
Times Bold Italic
Times New Roman
Times New Roman Italic
Times New Roman Bold
Times New Roman Bold Italic
Univers Condensed Medium
Univers Condensed Medium Italic
Univers Condensed Bold
Univers Condensed Bold Italic
Wingdings
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbats
ZapfDingbats
2 bitmapped fonts
Line Printer 16
POSTNET Barcode

Symbol Sets

ABICOMP Brazil/Portugal
ISO 8859-1 Latin 1 (ECMA-94)
Math-8
ABICOMP International
ISO 8859-2 Latin 2
Greek-8
DeskTop
ISO 8859-5 Latin/Cyrillic
Turkish-8
Legal
ISO 8859-7 Latin/Greek
Roman-8
MC Text
ISO 8859-9 Latin 5
Roman-9
Microsoft Publishing
ISO 8859-10 Latin 6
Roman Extension
Russian-GOST
ISO 8859-15 Latin 9
Ukrainian
Ventura ITC Zapf Dingbats
PCL ITC Zapf Dingbats
PC-8 Bulgarian
Ventura International
PS ITC Zapf Dingbats
PC-8 Danish/Norwegian (437N)
Ventura Math
PS Math
PC-8 Greek Alternate (437G)
Ventura US
PS Text
PC-8 Turkish (437T)
Pi Font
PC-8 Latin/Greek
Windows 3.0 Latin 1
Symbol
PC-8 PC Nova
Windows 98 Cyrillic
Wingdings
PC-8 Polish Mazovia
Windows 98 Greek
POSTNET Barcode
PC-8 Code Page 437
Windows 98 Latin 1
Windows 98 Latin 2
ISO : German
PC-775 Baltic (PC-8 Latin 6)
Windows 98 Latin 5
ISO : Spanish
PC-850 Multilingual
Windows 98 Latin 6 (Baltic)
ISO 2: IRV (Int'l Ref Version)
PC-851 Greece
ISO 4: United Kingdom
PC-852 Latin 2
ISO 6: ASCII
PC-853 Latin 3 (Turkish)
ISO 10: Swedish
PC-855 Cyrillic
ISO 11: Swedish for Names
PC-857 Latin 5 (Turkish)
ISO 14: JIS ASCII
PC-858 Multilingual Euro
ISO 15: Italian
PC-860 Portugal
ISO 16: Portuguese
PC-861 Iceland
ISO 17: Spanish
PC-863 Canadian French
ISO 21: German
PC-865 Nordic
ISO 25: French
PC-866 Cyrillic
ISO 57: Chinese
PC-869 Greece
ISO 60: Norwegian version 1
PC-911 Katakana
ISO 61: Norwegian version 2
PC-1004 OS/2
ISO 69: French
ISO 84: Portuguese
ISO 85: Spanish

Note: Not all fonts support all of the symbol sets. Refer to the Technical Reference manual for your specific printer or use your printer operator panel to find which symbol sets are supported by each font.

Media Support

All base models come standard with one 250-sheet paper drawer and one 150-sheet auxiliary tray. One 250-sheet output bin is standard. See tables below for standard and maximum media capacities.

Input Media Combinations and Capacities (Sheets)

Optional Optional Total
Aux. Tray Drawer 1 Drawer 2 Drawer 3 Capacity
--------- -------- -------- -------- --------
Standard 150 250 400
150 250 250 650
150 250 500 900
150 250 250 250 900
150 250 250 500 1150
150 250 500 500 1400
150 250 500 250 1150

Output Media Capacities (Sheets)

Standard Total
Output Bin Capacity
---------- --------
Standard 250 250

Media Sizes Supported

Input Drawers

The standard and optional 250-sheet drawers contain a rotary switch to indicate input media. The switch setting will automatically set the printer to the indicated media size. The table below lists switch settings. The optional 500-sheet drawer only supports their fixed media size.

Switch
Indication Media Size
---------- ------------
0 Letter
1 Legal
2 11 x 17 in.
3 A5
4 A4
5 A3
6 B5-JIS
7 B4-JIS
8 8.5 x 13 in.
9 Universal

Duplex Support

The optional duplex unit supports paper weights of 64-90 gsm (17-24 lb). It does not support cardstock, transparencies, labels, or envelopes. the indicated media size. The table below lists paper sizes supported.

Paper Sizes Supported
---------------------
Statement
A5 LEF(1)
B5 LEF
Executive LEF
A4 LEF
A4 SEF
Letter LEF
Letter SEF(1)
B5 SEF
Legal 13 SEF
Legal 14 SEF
B4 SEF
A3 SEF
Ledger SEF

Note: (1) LEF = Long Edge Feed, SEF = Short Edge Feed.

Input Media

Standard Optional Optional
Aux. 250-Sheet 250-Sheet 500-Sheet
Paper Size & Type Tray Drawer Drawer Drawer
------------------------ ---- --------- --------- ---------
A4 (210x297 mm) Yes Yes Yes Yes
A5 (148x210 mm) Yes Yes Yes No
B5-JIS (182x257 mm) Yes Yes Yes No
Letter (8.5"x11") Yes Yes Yes Yes
Legal (8.5"x14") Yes Yes Yes No
Executive (7.25"x10.5") Yes No No No
Folio (8.5"x13") Yes Yes No No
Statement (5.5"x8.5") Yes No No No
A3 (297x420 mm) Yes Yes Yes No
Tabloid (279.4x431.8 mm) No No No No
Universal(1) Yes Yes Yes No
7 3/4 Env. (98x191 mm) Yes No No No
9 Env. (98x225 mm) Yes No No No
Commercial #10 Env. Yes No No No
(104.8x241.3 mm)
DL Env. (110x220 mm) Yes No No No
C5 Env. (169x229 mm) Yes No No No
B5 Env. (176x250 mm) Yes No No No
Other Env.(2) Yes No No No
Paper Yes Yes Yes Yes
Cardstock Yes No Yes No
Transparencies Yes No Yes No
Paper Labels Yes No Yes No

Note: (1) Maximum: 148x297 mm to 148x508 mm (5.8x11.7 in. to 5.8x20 in.), Minimum: 101.6x101.6 mm (4x4 in)

Note: (2) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.)

Input Media Types and Weights Supported

Input Source Weight Supported
------------------------------------- --------------------
Auxiliary Tray 64-200 gsm (17-53 lb)
250-Sheet Standard Drawer 64-105 gsm (17-28 lb)
250-Sheet Optional Drawer (A3) 64-200 gsm (17-53 lb)
500-Sheet Optional Drawer (A4/Letter) 64-90 gsm (17-24 lb)

Additional Media Guidelines

Follow the media guidelines below for successful printing:

Paper

Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.

Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.

Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the Infoprint 1226.

Unsuitable papers include multipart forms and documents, chemically treated papers, coated and synthetic and thermal papers, carbonless forms, and preprinted papers requiring a high degree of registration.

Recycled paper less than 80g/sqm may cause unacceptable results.

Envelopes

All envelopes should be new, unused, and without package damage.

Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.

Minimum weight: 75 g/m2 (20 lb.)

The following envelopes should not be used:

Envelopes with windows, holes, perforations, cutouts, or deep embossing.

Envelopes with metal clasps, string ties, or metal folding bars.

Envelopes with exposed flap adhesive when the flap is in the closed position.

For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.

Under high humidity conditions (over 60%), envelopes may seal during printing.

Transparencies

Use letter or A4-size sheets only.

Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint 1226.

Labels

Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.

Paper Sensing

The Infoprint 1226 printer has the following sensors:
Output Bin Full
Life Counter for Supplies
New/Present Supplies
Supplies Low/Life Warning
Cover Open

Certifications

Infoprint 1226 complies with the global safety standard for Information Technology Equipment, i.e. IEC 60950, and its country equivalents in the markets we serve. The following sections highlight the approvals and certifications that Infoprint 1226 is expected to receive.

120V Version

Underwriters Laboratories, Inc. UL 1950, Third Edition, Information Technology Equipment

Energy Star compliant

FCC Class B per FCC Rules, Parts 2 and 15 - all geographies

Industry Canada (EMC) Compliance Statement

Official Mexican State Agency approval & import registration to equipment standard NOM-018-SCFI-1993 Safety of Data Processing Equipment

IEC 320, International Standard Electrical Appliance Connectors

Canadian Standards Association CAN/CSA-C22.2 No. 950-95, Third Edition, Information Technology Equipment

230V Version

International Chemical Registration

International Electrotechnical Commission IEC 60950 2nd Edition, plus Amendments 1, 2, 3, 4

IEC 61000-3-2 (Harmonics) and IEC 61000-3-3 (Flicker)

EN 55022:1998

EN 55024:1998

EN 61000-3-2: 1995

EN 61000-3-3 : 1995

IEC 320, International Standard Electrical Appliance Connectors

CB Certificate and Test report to include the country differences of all participating CB Scheme members as listed at:
www.cbscheme.com,

With the exception of Canada (CA), Japan (JP), and U.S.A. (US), CB assessment shall be to IEC 60950 2nd ED. + A1+A2+A3+A4 and IEC 60825-1 +A11.

European Union - CE marking via EU Declaration of Conformity to the EMC (89/336/EEC) and Low-Voltage (73/23/EEC) Directives

CISPR Class B

CISPR 22, C-tick mark

CISPR 22, PRC (CCC)

Software

MarkVision Professional and printer drivers are provided on the Drivers, MarkVision, and Utilities CD that is packaged with the printer. See Publications section for details. MarkVision Professional for Sun Solaris, SuSE Linux, Red Hat Linux, HP-UX and IBM AIX operating systems are available from the IBM Web site.

The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.

Operating Systems

Infoprint 1226 is compatible with applications running under the following operating systems for either local or network connections: For information about USB connections, see Local Connections.

Apple Macintosh:

Apple MacOS 8.6 or later

Microsoft Windows:
Microsoft Windows 95 4.00.950 or later
Microsoft Windows 98, 2nd Edition
Windows Me
Microsoft Windows NT 4.00
Microsoft Windows NT 4.00 Server
Microsoft Windows 2000 Professional
Microsoft Windows 2000 Server
Microsoft Windows 2000 Advanced Server

Download the latest printer drivers from the IBM Web site

Novell:

Novell NetWare** 3.x, 4.x, 5.x including full DNS and NDPS support

Novel** Distributed Print ServicesTM (NDPSTM) 2.0 or later with IBM NDPS IP Gateway.

Novel NetWare Enterprise Print Services (NES) with IBM NDPS IP Gateway.

Download the NDPS IP Gateway from the IBM Web site.

Linux:
Caldera eDesktop 2.4
Red Hat Linux 6.1, 6.2, 7.0
SuSE 6.3, 6.4, 7.0 Linux
TurboLinux Workstation 6.0, 6.1

Download the Enhanced Printer Drivers from the IBM Web site.

UNIX:
Compaq Tru64 (Digital) UNIX 4.0D
HP-UX 10.x, 11.x
IBM AIX 4.2.1 or higher
SCO OpenServer 5.0.4 or higher
SGI IRIX 6.x
Sun Solaris x86 2.6, 7, 8
Sun Solaris 2.6, 7, 8
UnixWare 7.x

Download the Enhanced Printer Drivers from the IBM Web site.

Other:

Virtually any platform supporting TCP/IP

IBM iSeries Systems with TCP/IP with OS/400(r) V4R5 or later using OS400 Host Print Transform.

The software applications that operate with most Apple LaserWriter printers will generally operate with the Infoprint 1226. The Macintosh 128, 512, and 512e Computers are not supported.

Management Solutions (MarkVision)**

MarkVision Professional, MarkVision Messenger, NetPnP and Software Installation and Distribution tools are provided on Drivers, MarkVision and Utilities CDs.

MarkVision Professional

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a Web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

MarkVision Messenger

MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.

NetPnP(1)

NetPnP senses when an additional IBM printer is attached to the network and automatically creates a shared printer object on the Windows NT 4.0 or Windows 2000 system. Furthermore, NetPnP notifies end-users via e-mail that the network printer is available for printing. Designed for Windows NT 4.0 and Windows 2000 environments, Net PnP makes the Infoprint 1226 printers available to end-users within seconds of network attachment.

Note: (1) Provided on CD-ROM.

Software Installation and Distribution Tools(1)

In Windows NT 4.0 and Windows 2000 environments, these tools enable administrators to push printer software installation to other Windows NT 4.0 or Windows 2000 workstations or to write a script that will install specified printer software on specified Windows NT 4.0 or Windows 2000 workstations on the network. In Windows 9X environments, it enables administrators to write installation scripts that can then be distributed to other workstations. When executed, these scripts will silently install all specified IBM software.

Note: (1) Provided on CD-ROM.

Solaris Ready for Sun customers

These printers are certified Solaris Ready by Sun and include Infoprint 1226 Enhanced Printer Drivers for Sun Systems and Sun specific documentation seamless installation and use in Sun Solaris environments. The IBM network printers are Ethernet-ready for use in Sun networks.

The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances. MarkVision Professional is available from the IBM Web site.

IBM Infoprint Manager

Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.

Network Printer Resource Utility (NPRU)

NPRU will not support the Infoprint 1226.

TCP/IP Network Port Monitor Utility

This utility will not support the Infoprint 1226.

LPR Remote Printing Client Utility

This utility will not support the Infoprint 1226.

802.11g Wireless to Ethernet

Specifications

Model ACR-201-G
Standard IEEE 802.11g, 802.11g WPA-TKIP, WPA-PSK
Host Interface Ethernet, 802.3, RJ-45 receptacle
Frequency 2.4835 GHz (US and Europe)
RF Channels 11 channels (US, Canada)
13 channels (Europe, except France)
4 channels (France)
Transmission power 14 dBm at antenna input typical for 802.11g
16.2 dBm at antenna input typical for 802.11b
Receiver sensitivity -65dBm @ 54Mbps, -80sBm @11Mbps at 1e-5 BER
Typical
Antenna Dipole antenna with ~2dBi gain
Data Rate 1/ 2/ 5.5/ 6/ 9/ 11/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Modulation OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) DBPSK,
DQPSK, CCK (11b)
Link Distance ~1200 ft in open space
Network Types Support both the ad hoc mode and the
infrastructure mode
Data Encryption Support WPA-TKIP, WPA-PSK and 128/64-bit WEP
LED Indicators 4: Power, Transmission, Receiving,
Link/Ethernet-connection
Network Protocol TCP/IP, IPX/SPX, AppleTalk
Support

Printer Management Utilities

MarkVision Professional (provided on the printer CDs)

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser. It provides IT administrators with real time device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

The 802.11g Wireless to Ethernet acts as a wireless Ethernet bridge. When used with a Lexmark printer that supports MarkVision Professional management capabilities, the wireless bridge provides the same level of functionality as if the printer were connected to the network via a wired connection.

MFP Information / Compatibility

When used with a network-capable MFP, the 802.11g Wireless to Ethernet provides network capabilities equivalent to a MFP connected to a wired 10/100BaseTX Ethernet network.

Network Security

The 802.11g wireless to Ethernet supports the following wireless security methods and protocols:

WPA-Personal-level security:
TKIP
Pre-Shared Key (PSK)

WEP:
64-bit
128-bit

These security modes cannot be used in combination. For example, if a user selects WPA-personal, the user cannot enable WEP security features.

In addition to the wireless security methods, the 802.11g Wireless to Ethernet included with the printer or MFP provides the following access control methods that an be used in conjunction with any wireless security methods stated above:
Device configuration password protection
Restricted Server List

Operating System Support

Workstation Operating Systems:
Apple Mac OS 8.6-9.x (LPR printing)
Apple Mac OS X.2 and above (Zero Configuration support)
Windows 98SE, Me
Windows NT 4.0(1)
Windows 2000
Windows XP
Red Hat Linux 7.3, 8.0, 9.0(1)
SuSE Linux 8.0, 8.1, 8.2(1)

Server Operating Systems:

Apple Mac OS X.2 Server and above

Windows NT 4.0 Server(1)

Windows 2000 Terminal Server

Windows 2000 Server, Advanced Server

Windows Server 2003

IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(1)

Virtually any platform supporting TCP/IP(1)

Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0

Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(1)

Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(1)

Red Hat Linux 7.3, 8.0, 9.0(1)

SuSE Linux 8.0, 8.1, 8.2(1)

Note: (1) May require initial configuration through Ad-hoc mode.

Printing Protocols

The 802.11g Wireless to Ethernet feature is compatible with all network protocols supported by the printer.

802.11g Wireless to USB

Network Security

The 802.11g wireless to USB supports the following wireless security methods and protocols:

WPA-Personal:
TKIP
Pre-Shared Key (PSK)

WEP:
64-bit
128-bit

These security modes cannot be used in combination. For example, if a user selects WEP, the WPA-Personal cannot be enabled. In addition to the wireless security methods, the print server provides the following access control methods:
Device configuration password protection
Restricted Server List

Operating System Support

Workstation Operating Systems:
Apple Mac OS 8.6, 9.x (LPR printing)
Apple Mac OS X 10.2 and above (Zero Configuration support)
Windows 98SE, Me
Windows NT 4.0(2)
Windows 2000
Windows XP
Red Hat Linux 7.3, 8.0, 9.0(2)
SuSE Linux 8.0, 8.1, 8.2(2)

Server Operating Systems:

Apple Mac OS X.2 Server and above

Windows NT 4.0 Server(2)

Windows 2000 Terminal Server

Windows 2000 Server, Advanced Server

Windows Server 2003

IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(2)

Virtually any platform supporting TCP/IP(2)

Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0

Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(2)

Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(2)

Red Hat Linux 7.3, 8.0, 9.0(2)

SuSE Linux 8.0, 8.1, 8.2(2)

Note: (2) May require initial configuration through Ad-hoc mode.

Printing Protocols

The following print protocols are supported:
Direct IP (TCP 9100)
LPR/LPD (TCP 515)
IPP (Internet Printing Protocol) (TCP 631 or TCP 80)
HBN (Host Based Networking)

Address Management Protocols

The following address management protocols are supported:
Auto-IP
DHCP
DDNS
mDNS
ARP
WINS

Device Management Protocols

The following device management protocols are supported:
Zero Configuration
HTTP
ICMP
SNMP
HCP Host Configuration Protocol
Telnet 9000

File Transfer Protocols

The following file transfer protocols are supported:
FTP (printing, UCF file configuration)
TFTP (printing, code updating)

IPDS is not supported through the USB port.

Network Management

These features provide management capabilities primarily via its embedded web server. Basic network management is also provided using traditional TCP/IP functions.

Basic Management

The following basic management applications are supported:
Ping
Finger
Telnet 9000
Discovery Utility

Advanced Management

These features are designed to allow the user to learn network status and configure network settings remotely. The printer server support
the following management methods:
Embedded Web Server
SNMP
Universal Configuration Files (UCF)

Embedded Web Server Function

Supported Web Browsers
Microsoft Internet Explorer 5.0, 6.0 and newer
Netscape 4.0, 7.0 and newer
Safari 1.0 and newer

Primary Web Server Functions

The following items are available regardless of the status of the USB-attached device:
Name and picture of print server
Wireless status (connect speed, signal strength, Access Point)
Print Server Setup Page
Configuration of all general adapter settings (LAA, Contact Name, Locations, Etc.)
Configuration of all TCP/IP settings
Configuration of password
Links and Index section
Link to Troubleshooting
Applet to flash update

Certifications

802.11g wireless to Ethernet

These features meet the following standards and has obtained the appropriate approvals.
UL 60950-1: Safety of Information Technology Equipment
Code of Federal Regulations 47, FCC Part 15 (Class B)
FCC Part 15 Subpart C Section 15.247
FCC Declaration of Conformity (DoC) Mark on the label
Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
Industry Canada RSS-210
UL 60950 3rd Edition

802.11g wireless to USB

These features meet the following standards and has obtained the appropriate approvals.
Code of Federal Regulations 47, FCC Part 15 (Class B)
FCC Part 15 Subpart C Section 15.247
FCC Declaration of Conformity (DoC) Mark on the label
Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
Industry Canada RSS-210
Underwriters Laboratories, Inc., UL 60950-1
Physical Specifications

Dimensions

Width Depth Height Weight(1)
--------- --------- --------- ---------
Base 459.0 mm 430.0 mm 310.0 mm 19.5 kg
Model (18.1 in) (16.9 in) (12.2 in) (43.0 lb)

Network 459.0 mm 430.0 mm 392.0 mm 25.2 kg
Model (18.1 in) (16.9 in) (15.4 in) (55.5 lb)

Note: (1) Weights for low-voltage and high-voltage modes are the same.

Recommended Clearances

Left Right Front Back Top
------ ------ ------- ------ -------
Base 200 mm 200 mm 700 mm 200 mm 400 mm
Model (8 in) (8 in) (28 in) (8 in) (16 in)

Network 200 mm 200 mm 700 mm 200 mm 400 mm
Model (8 in) (8 in) (28 in) (8 in) (16 in)

Operating Environment
Operating temperature: 15.6C to 32.2C (60F to 90F)
Relative humidity: 8% to 80%
Max. wet bulb temperature (operating): 23.0C (73F)
Altitude: 2,500 meters (8,200 feet)
Ambient operating environment: 15.6 to 32.2C (60 to 90F) and 8% to 80% RH
Printer without cartridges: -40 to 43.3C (-40 to 110F)

Electrical Specifications

Low-Voltage Models:
110 - 127 V ac at 47/63 Hz

Power Consumption

Power consumption for base model, low-voltage and high-voltage models is the same.

Printing States Power
---------------------------- ---------
Average Power while Printing 500 watts
Standby Mode 100 watts
Sleep Mode
- Fuser Off 8 watts
- Fuser Off/Fan Stop 5 watts

Note: All models are Energy Star compliant.

Acoustics

All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

Meter Average Sound Pressure, dBa:

1-Meter Average Sound Pressure:
Standby: 28 dBa
Simplex printing: 51 dBa

Sound Power:
Standby: 4.5 Bels
Simplex printing: 6.6 Bels
Limitations

Mach Feature Part
Type Model Number Number Description UPC
---- ----- ------- ------- ------------------------------ ---------------
4526 001 53P7830 Infoprint 1226 NA (LV) 0-87944-81564-8
4526 TN1 53P7831 Infoprint 1226 tn NA (LV) 0-87944-81565-5
53P7812 250-Sheet Drawer 0-87944-82640-8
53P7813 500-Sheet Drawer (Letter) 0-87944-82641-5
53P7815 Duplex Unit 0-87944-82643-9
53P7820 Card for IPDS & SCS/TNe 0-87944-82648-4
53P7821 ImageQuick Card 0-87944-82649-1
53P7822 Bar Code Card 0-87944-82650-7
53P7601 8 MB memory DIMM 0-87944-82183-0
53P7602 16 MB memory DIMM 0-87944-82230-1
53P7603 32 MB memory DIMM 0-87944-81970-7
53P7604 64 MB memory DIMM 0-87944-81971-4
53P7605 128 MB memory DIMM 0-87944-81972-1
28P1853 2 MB flash SIMM 0-87944-67838-0
28P1854 4 MB flash SIMM 0-87944-67839-7
28P1855 8 MB flash SIMM 0-87944-67840-3
28P1856 16 MB flash SIMM 0-87944-67841-0
28P1858 5+GB ISP Hard Disk w/Adapter 0-87944-67843-4
28P1864 Optra Forms 2MB Flash DIMM 0-87944-67846-5
28P1865 Optra Forms 4MB Flash DIMM 0-87944-67847-2
28P1866 Optra Forms 8MB Flash DIMM 0-87944-67848-9
28P1867 Optra Forms 16MB Flash DIMM 0-87944-67849-6
28P1868 Optra Forms Hard Disk w/Adapt 0-87944-67852-6
28P1862 Optra Forms Software 0-87944-67844-1
28P1863 Optra Forms Director Software 0-87944-67845-8
28P1869 Optra Forms 2-Key Security 0-87944-67850-2
28P1870 Optra Forms 3-Key Security 0-87944-67851-9
53P9307 Optra Forms Manager 0-87944-72539-8
53P9344 Fiber Print Server SC 0-87944-73636-3
53P9346 Fiber Print Server MTRJ 0-87944-73640-0
53P9353 Parallel Card and 1284-C Cable 0-87944-73647-9
53P9585 Parallel Card and C-B Adapter 0-87944-74551-8
53P9584 Parallel 1284 C-B Adapter 0-87944-74550-1
28P1846 RS-232-C Serial/Parallel 1284-C0-87944-67910-3
28P1845 External Serial Adapter 0-87944-67911-0
28P1842 Twinax/Coax Adapter for SCS 0-87944-73691-2
28P1835 Token-Ring 0-87944-67907-3
28P1836 Token-Ring-3 port 0-87944-67906-6
28P1839 Ethernet 10/100BaseTX-1 port 0-87944-67903-5
28P1838 Ethernet 10/100BaseTX 0-87944-67908-0
28P1837 Ethernet 10BaseT/2 0-87944-67909-7
28P1840 Ethernet 10/100BaseTX-3 port 0-87944-67905-9
28P1841 Ethernet 10/100TX/10Base2-1 pt 0-87944-67904-2
28P1871 10 ft. Parallel Cable 0-87944-67916-5
28P1872 20 ft. Parallel Cable 0-87944-67917-2
28P1874 50 ft. Serial Cable 0-87944-67919-6
28P1873 Parallel 1284-C Cable 6 ft. 0-87944-67915-8
28P1875 2-meter USB Cable 0-87944-67918-9

Servicepacs

Machine Electronic
Type Model Description Part Number
------- ------- ------------------------------- -----------
4526 001,TN1 SVCPAC PTR 2YR DEPOT EXC 9X5/ND 69P9598
4526 001,TN1 SVCPAC PTR 3YR DEPOT EXC 9X5/ND 69P9599
4526 001,TN1 SVCPAC PTR 4YR DEPOT EXC 9X5/ND 69P9600
4526 001,TN1 SVCPAC PTR 5YR DEPOT EXC 9X5/ND 69P9601

4526 001,TN1 SVCPAC PTR 1YR IOR 9X5/NXTDAY 69P9602
4526 001,TN1 SVCPAC PTR 2YR IOR 9X5/NXTDAY 69P9603
4526 001,TN1 SVCPAC PTR 3YR IOR 9X5/NXTDAY 69P9604
4526 001,TN1 SVCPAC PTR 4YR IOR 9X5/NXTDAY 69P9605
4526 001,TN1 SVCPAC PTR 5YR IOR 9X5/NXTDAY 69P9606

4526 001,TN1 SVCPAC PTR 1YR IOR 24X7/SAMDAY 69P9607
4526 001,TN1 SVCPAC PTR 2YR IOR 24X7/SAMDAY 69P9608
4526 001,TN1 SVCPAC PTR 3YR IOR 24X7/SAMDAY 69P9609
4526 001,TN1 SVCPAC PTR 4YR IOR 24X7/SAMDAY 69P9610
4526 001,TN1 SVCPAC PTR 5YR IOR 24X7/SAMDAY 69P9611

Printer Features

All printer features are customer installable. FC = feature code.
Input, Output and Other Media Features

(#4501) 250-Sheet Drawer
Minimum required = 0
Maximum allowed = 2 for base models, 1 for network models
Prerequisite = None
Co-requisite = None

These input drawers can be installed beneath the printer to offer an added input source which holds approximately 250 sheets of 20 lb. paper including A3 size.

(#4502) 500-Sheet Drawer (Letter)
Minimum required = 0
Maximum allowed = 2 for base models, 1 for network models
Prerequisite = None
Co-requisite = None

These input drawers can be installed beneath the printer to offer an added input source which holds approximately 500 sheets of 20 lb. paper of letter size.

(#4503) 500-Sheet Drawer (A4)
Minimum required = 0
Maximum allowed = 2 for base models, 1 for network models
Prerequisite = None
Co-requisite = None

These input drawers can be installed beneath the printer to offer an added input source which holds approximately 500 sheets of 20 lb. paper of A4 size.

(#4402) Duplex Unit
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

Memory and Flash Memory Features

The Infoprint 1226 has two slots for memory and flash memory features. A maximum of 272 MB of memory for base model, 288 MB for network model and 16 MB of flash memory is supported.

Only one flash memory feature is allowed. If more than one flash feature is installed, the feature with the largest capacity is used. If a flash feature and an Optra Forms flash feature are both installed, the Optra Forms flash feature is used.

The memory features for the printer include:

(#4308) 8 MB Memory DIMM
Minimum required = 0
Maximum allowed = 2
Prerequisite = None
Co-requisite = None

(#4316) 16 MB Memory DIMM
Minimum required = 0
Maximum allowed = 2
Prerequisite = None
Co-requisite = None

(#4332) 32 MB Memory DIMM
Minimum required = 0
Maximum allowed = 2
Prerequisite = None
Co-requisite = None

(#4364) 64 MB Memory DIMM
Minimum required = 0
Maximum allowed = 2
Prerequisite = None
Co-requisite = None

(#4390) 128 MB Memory DIMM
Minimum required = 0
Maximum allowed = 2
Prerequisite = None
Co-requisite = None

The flash memory features for the printer include:

(#4030) 2 MB Flash DIMM
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

(#4032) 4 MB Flash DIMM
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

(#4034) 8 MB Flash DIMM

Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

(#4036) 16 MB Flash DIMM
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

If larger storage is required, an optional hard disk feature is also available.

(#4329) 5+GB Hard Disk with Adapte
Maximum allowed = 1
Prerequisite = None
Co-requisite = None
Conflict = This feature is mutually exclusive with the Optra Forms 5+GB Hard Disk with Adapter (FC 4877) and with any network card for internal print servers (FCs 4120, 4161, 4162, 4168 and 4169).

The hard disk with adapter feature is required for a hard disk support. The adapter plugs into the one interface slot and does not take up a memory slot.
Internal Local Connection Features

In addition to the standard USB port for all models and standard parallel port on the base models, each Infoprint 1226 model has one interface slot that can be used for optional network connections or local connections.

The following local connection options are supported:
(#4132) External Serial Adapter
Minimum required = 0
Maximum allowed = 1
Prerequisite = base printer model (001/002) or RS 232-C Serial/Parallel 1284 C card (FC 4133).
Co-requisite = None

This adapter is installed on the printer's parallel port and receives its power through the parallel port. It utilizes a standard 25-pin D-shell females connector and supports baud rates up to 19,200 bps for RS-232C or 38,400 bps for RS-422.

(#4133) RS 232-C Serial/Parallel 1284 C Card
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

This card provides an RS 232-C serial port and 1284-C parallel port.

(#4135) Parallel 1284 C-B Adapter
Minimum required = 0
Maximum allowed = No maaximum
Prerequisite = None
Co-requisite = None

This adapter allows an RS-232C Serial/Parallel port with a type C connector (1284-C) to accept a cable with a type B connector (1284-B).

(#4136) Parallel Card and 1284-C Cable
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

This feature includes both the RS-232C Serial/Parallel 1284-C Interface Card and a Parallel 1284-C 6-foot cable.

(#4137) Parallel Card and C-B Adapter
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

This feature includes both the Parallel 1284 C-B Adapter (FC 4135) and the RS-232C Serial/Parallel 1284-C Interface Card (FC 4133).

Cable Features
(#4182) Parallel 1284-C Cable 6-Ft.
Minimum required = 0
Maximum allowed = No maaximum
Prerequisite = None
Co-requisite = None

For personal Computers and UNIX Workstations, the recommended PC parallel printer cable is required for attachment of the Infoprint 1226. It must be ordered separately.

(#4180) 10-Ft. Parallel Cable
Minimum required = 0
Maximum allowed = No maaximum
Prerequisite = None
Co-requisite = None

For parallel attachment, this cable is recommended for ten feet or less and must be ordered separately.

(#4181) 20-Ft. Parallel Cable

Minimum required = 0
Maximum allowed = No maaximum
Prerequisite = None
Co-requisite = None

For parallel attachment, this cable is recommended for twenty feet or less and must be ordered separately.

(#4183) 50-Ft. Serial Cable
Minimum required = 0
Maximum allowed = No maaximum
Prerequisite = None
Co-requisite = None

For serial attachment, this cable is recommended for fifty feet or less and must be ordered separately.

(#4184) 2-meter USB Cable
Minimum required = 0
Maximum allowed = No maaximum
Prerequisite = None
Co-requisite = None

For USB attachment, this USB cable is recommended and must be ordered separately.
Network Connection Features

Network cards plug into the one interface slot. Only one card is allowed per network protocol. That is, only one Ethernet and only one Token-Ring card. The network models have Ethernet onboard and cannot have a 10/100BaseTX card installed. These models can have the 10Base/2 card installed but it will disable the onboard Ethernet.
Network Cards for Internal Print Server Features

Infoprint 1226 network models come standard with Fast Ethernet 10/100BaseTx built-in to the controller board. Additionally, Infoprint 1226 supports the following MarkNet** N2000 Series Internal Print Servers:

(#4120) Token Ring attachment
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None
Conflict = This feature is mutually exclusive with the Hard Disk with Adapters (FCs 4329, 4877) and with other any network card for internal print servers (FCs 4161, 4162, 4168 and 4169).

(#4162) Ethernet 10BaseT/100BaseTX
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None
Conflict = This feature cannot be installed in the network printer models, N01 and N02 and it is mutually exclusive with the Hard Disk with Adapters (FCs 4329, 4877) and with other any network card for internal print servers (FCs 4120, 4161, 4168 and 4169).

(#4161) Ethernet 10BaseT/2
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None
Conflict = This feature will disable the onboard ethernet on the network printer models, N01 and N02 and it is mutually exclusive with the Hard Disk with Adapters (FCs 4329, 4877) and with other any network card for internal print servers (FCs 4120, 4162, 4168 and 4169).

(#4168) Fiber SC Card
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None
Conflict = This feature is mutually exclusive with the Hard Disk with Adapters (FCs 4329, 4877) and with other any network card for internal print servers (FCs 4120, 4161, 4162 and 4169).

This print server allows the printer to connect a 100BaseFX fiber optic Ethernet network. This card supports multimode fiber (62.5/125um) and has a duplex SC connector.

(#4169) Fiber MTRJ Card
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None
Conflict = This feature is mutually exclusive with the Hard Disk with Adapters (FCs 4329, 4877) and with other any network card for internal print servers (FCs 4120, 4161, 4162 and 4168).

This print server allows the printer to connect a 100BaseFX fiber optic Ethernet network. This card supports multimode fiber (62.5/125um) and has a female MTRJ connector.

(#4170) 802.11b Adapter
Minimum required: 0
Maximum allowed: 1
Prerequisite: Network model or Ethernet feature
Co-requisite: None

This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11b wireless standard. This standard operates at speeds of up to 11 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building contruction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.

The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.

(#4171) Ethernet to USB Adapter
Minimum required: 0
Maximum allowed: 1
Prerequisite: USB port
Co-requisite: None

This adapter attaches to the printer's USB port and has one 10/100BaseTX RJ-45 port for connection to the network.

Note: This features is customer installable.
Network Cards for External Print Servers Features

These extenal Print Server features allow the printer to be connected to a network using the printer's parallel or serial port. These features are in addition to any internal print server features.

(#4163) Ethernet 10BaseT/100BaseTX-1 port
Minimum required = 0
Maximum allowed = 1
Prerequisite = Base printer model or RS-232-C Serial/Parallel 1284-C feature (FC 4133) or Parallel Card and 1284-C Cable feature (FC 4136).
Co-requisite = None

This external print server has one parallel port to connect to a Ethernet 10BaseT/100BaseTX network.

(#4165) Ethernet 10/100BaseTX/10Base2-1 port
Minimum required = 0
Maximum allowed = 1
Prerequisite = Base printer model or RS-232-C Serial/Parallel 1284-C feature (FC 4133) or Parallel Card and 1284-C Cable feature (FC 4136).
Co-requisite = None

This external print server has one parallel port to connect to a Ethernet 10BaseT/100BaseTX or 10Base2 network.

(#4164) Ethernet 10BaseT/100BaseTX-3 port
Minimum required = 0
Maximum allowed = 1
Prerequisite = Base printer model or RS-232-C Serial/Parallel 1284-C feature (FC 4133) or Parallel Card and 1284-C Cable feature (FC 4136), or External Serial Adapter feature (FC 4132).
Co-requisite = None

This external print server has two parallel ports and one serial port to connect up to three printers to a Ethernet 10BaseT/100BaseTX network.
(#4121) Token Ring-3 port
Minimum required = 0
Maximum allowed = 1
Prerequisite = Base printer model or RS-232-C Serial/Parallel 1284-C feature (FC 4133) or Parallel Card and 1284-C Cable feature (FC 4136), or External Serial Adapter feature (FC 4132).
Co-requisite = None

This external print server has two parallel ports and one serial port to connect up to three printers to a Token Ring network.

MarkNet Compatibility

The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:
TCP/IP
Novell (IPX/SPX including NetWare Directory Services)
AppleTalk**
LexLink** (DLC/LLC)

The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:
IPP: Internet Printing Protocol
SLP: Service Location Protocol
NTP: Network Timing Protocol

The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.

The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.
IBM Host Connection Features
(#4823) Decryption Card

Minimum required = 0, maximum allowed = 1

Prerequisite = Infoprint 1120, 1125, 1130, 1140, 1145, 1226, 1332, 1352, 1372 printer with a standard network connection (n or dn models). Infoprint 1120 must have 32 MB of memory.

Co-requisite = none

Conflict = the decryption feature plugs into the firmware slot in the printer and is mutually exclusive with the application solution features including Card for IPDS and SCS/TNe (FC 4820), Bar Code (FC 4870) and ImageQuick Card (FC 4821). This feature cannot be installed on any of the "in" models.

Encryption Overview

This feature offers an encryption solution for print output on hosts such as a mainframe, UNIX server, Microsoft Windows PC or Apple workstation that connect over a TCP/IP network to the IBM workgroup printer. The decryption card is installed in the printer and decryption takes place at the printer for maximum security.

This decryption solution is based on Federal Information Processing Standard (FIPS-197) for the Advanced Encryption Standard (AES). This standard specifies Rijndael as the encryption algorithm. AES is the new encryption standard that replaces DES, the old standard. AES is a symmetric algorithm supporting key lengths of 128, 192, and 256 bits for encryption. A symmetric algorithm uses a single key for both encryption and decryption. A key length of 256 bits provides 1.1 times 10 to the power of 77 possible combinations which makes it extremely difficult for eavesdroppers to decrypt intercepted print jobs.

The decryption feature also supports sessions keys. Session keys are used during a specific host session with the printer. The key is different for every session providing maximum security. Most competitive decryption solutions don't support session keys.

Connectivity Requirements for Decryption Feature

The printer must be connected to an ethernet network using TCP/IP. This feature only work on printer models with a standard ethernet port. It will not work with any of the optional ethernet print server features. The decryption card plugs into the firmware slot in the printer and is mutually exclusive with the application solution features such as IPDS, Bar Code, and ImageQuick.

Unique TCP/IP port numbers are used for encrypted print jobs. The decryption card decrypts and prints information appropriate for the port.

This feature is supported on the following IBM drivers:
Sun Solaris 7, 8, 9
HP-UX 11
IBM AIX 4.3, 5.0
Linux (Re Hat, Caldera, SuSE, TurboLinux)
Windows 98/Me/NT4.0/2000/XP
Mac OS X
iSeries (AS/400)

Note: iSeries is formerly known as AS/400.

IBM iSeries with OS/400 V4R5 or later utilizing OS/400 Host Print Transform. Use Manufacturer Type and Model (MFRTYPMDL) of LEXOPTRAT** (in OS/400 Version 4 Release 2 or later), LEXOPTRAS**, or LEXOPTRA**.

(#4141) Coax/Twinax Adapter for SCS
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

This card plugs into the expansion slots.

Notes:
Coax/Twinax Adapter for SCS is FCC class A only

When the printer is emulating an IBM printer, the function supported depends on the IBM host software.
The SCS adapter uses PCL(fonts from the printer for IBM host fonts. The default resolution of the printer determines the resolution of the SCS data and its PCL fonts.

For Direct Twinaxial Attachment - Hardware Compatibility

When the printer contains the optional Coax/Twinax Adapter for SCS with a twinaxial cable, the printer attaches to the following IBM hardware:
iSeries servers and e-systems
iSeries Twinaxial Workstation Controllers
iSeries Advanced System/36 Twinaxial Workstation Controller
5494 Remote Control Unit
5394 Remote Control Unit

Software Compatibility:

The IBM host software requirements for SCS printing when the printer is emulating an IBM 3812 Model 1, 5219 D01/D02, 4214-02, 5225-01, 5224-01 or 5256-03 printer are as follows:
iSeries OS/400 (All releases)
iSeries OS/400 V3R6 with System Support Program (SSP) Release 7.5 or later
iSeries SSP Release 7.1 or later

For Direct Coaxial Attachment - Hardware Compatibility

When the printer contains the optional Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:
IBM 3174 Control Unit
ES/9000 Work Station Subsystem Controller
3174 compatible control units

Software Compatibility:

The IBM host software requirements for DSC/DSE or SCS printing when the printer is emulating an IBM 3812-01, 4224-01, 3287, 3268 or 4214 printer are as follows:

Any application or host software that generates the SCS or DSC/DSE data streams for one of the emulated printers such as:
JES/328X Print Facility V2R2 or later
Graphical Data Display Manager (GDDM) V2.3
RSCS V3.2 or later
VTAM
DisplayWrite/370 V1R2.1 or V2R1 or later (MVS/CICS or VSE/CICS)

The SCS data stream is supported by IBM MVS/CICS and VSE/CICS.
Optra Forms Features

(#4871) Optra Forms Software Feature
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = Optra Forms flash or Hard Disk

Optra Forms uses 'up-to-the-minute' data directly from customer applications and combines it with printer resident electronic forms with text and graphics to produce (print) completed forms such as invoices, statements, pick slips, labels, purchase orders or confirmations with bar codes or other specialized graphics on a variety of paper types.

For Optra Forms:
No Server-based or host based merge program or software is required.
Use with virtually any ASCII text print file from any platform, mainframe, iSeries, UNIX or workstation, over Coax, Twinax, parallel, serial or LAN (TCP/IP).
Generally, make no changes to database applications.
Print different forms at different locations from the same database, possibly using the same data.
Update forms quickly and easily (globally) over the LAN
Provides support for bar codes, color, duplex, multipage form sets and more.
Store forms as efficient, compact forms in flash.

Optra Forms is supported by the Infoprint 1226 printer using the Optra Forms 2, 4, 8 and 16MB Flash DIMM's or Optra Forms Hard Disk.

(#4872) Optra Forms Director Feature
Minimum required = 0
Maximum allowed = 1
Prerequisite = Optra Forms Software (FC 4871)
Co-requisite = None

Optra Forms Director is a Windows NT or Windows 2000 server-based program. Using additional host software (AS/400, UNIX or Mainframe), the host application sends a print spool file to a Windows NT or 2000 print queue. Optra Forms Director service automatically pareses the print spool file into single or multiple print jobs using Microsoft Visual Basic Script or JScript methods and Named Pipes.

The spool file which may contain many individual documents is customized by separating it into individual jobs or by adding data or particular commands to the individual documents that are then sent to IP, LPR, or Windows printer destinations. The additional data or commands may be to staple, separate documents with a cover page, copy and collate, print on both sides, offset stack, fax, or hole punch each individual job. Print jobs are customized and distributed electronically to network printers automatically without making any changes to host applications.

Optra Forms is supported on the Infoprint 1226 using a Optra Forms flash or Hard Disk. Only one Optra Forms flash DIMM is supported. If a Flash DIMM and Optra Forms Flash DIMM are both installed, the Optra Forms DIMM will be used.

(#4880) Optra Forms Manager
Minimum required = 0
Maximum allowed = 1
Prerequisite = Optra Forms Flash (FCs 4874, 4875, 4876) or Optra Forms Hard Disk w/Adapter (FC 4877),
Co-requisite = None

Optra Forms Manager enables administrators to manage and distribute forms to multiple printers over a TCP/IP network. This includes loading new forms and updating existing forms on an Optra Forms printer over a TCP/IP network.

Optra Forms Manager lets you:
Keep a master copy of all forms on a PC
Update all printers at same time over TCP/IP after a printer query for its resident Styles and creation dates. Only matching Styles (flash files) with different creation dates are downloaded to the printer over TCP/IP.
Import a printer IP address txt file (also from MarkVision(tm) registry)
Select the printers to which the Download or Update operations apply.
Run the update as a batch job
Create a log file to know successful printer updates
Create a Style report and save it to a comma separated variable (CSV) file giving better knowledge about the forms of the printers. The Style report includes the printer listed by their IP address or DNS name and a description, Style names and their versions and the Optra Forms Merge program version in each printer.
Create PDF files (using Acrobat Distiller) of the data merged with forms after retrieving archive data files from the Optra Forms hard disk. The PDF file can be saved as a softcopy archive file.
With an Optra Forms hard disk, create a job buffering partition or change its size. After the disk is formatted and partitioned, the Optra Forms Merge program is written to the disk.

To use Optra Forms Manager, the Optra Forms printers must be connected to a TCP/IP network. The LPR protocol is also supported to download forms.

Optra Forms Manager is now available on a separate CD for those customers who want to use this program to more effectively manage their Optra Forms printers over TCP/IP. Other third party service providers can also manage their customers forms more cost effectively.

(#4873) Optra Forms 2 MB Flash DIMM
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = Optra Forms Software

(#4874) Optra Forms 4 MB Flash DIMM

Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = Optra Forms Software

(#4875) Optra Forms 8 MB Flash DIMM
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = Optra Forms Software

(#4876) Optra Forms 16 MB Flash DIMM
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = Optra Forms Software

(#4877) Optra Forms 5+ GB Hard Disk with Adapter
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = Optra Forms Software
Conflict = This feature is mutually exclusive with the 5+GB Hard Disk with Adapter (FC 4329) and with any network card for internal print servers (FCs 4120, 4161, 4162, 4168 and 4169).

The adapter plugs into the interface slot and does not take up a memory slot.

(#4878) Optra Forms 2-Key Security
Minimum required = 0
Maximum allowed = 1
Prerequisite = Serial Port & Optra Forms SW
Co-requisite = None
Conflict = This feature is mutually exclusive with the 3-key security feature (FC 4879).

For added security, confidential forms printing can be restricted to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not.

(#4879) Optra Forms 3-Key Security
Minimum required = 0
Maximum allowed = 1
Prerequisite = Serial Port & Optra Forms SW
Co-requisite = None
Conflict = This feature is mutually exclusive with the 2-key security feature (FC 4878).

For added security, confidential forms printing can be restricted to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not.

Applications Solution Features

These features plug into the firmware card slot on the controller board. There is only one slot for either Bar Code card, ImageQuick card, or card for IPDS & SCS/TNe (see IBM Environment Solution features).

(#4870) Bar Code Card Feature
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

The Bar Code Option Card enables the Infoprint 1226 to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Bar Code Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM( (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.

(#4821) ImageQuick Card Feature
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

The ImageQuick Option Card enables the Infoprint 1226 to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.

IBM Environment Solution Features

(#4820) Card for IPDS and SCS/TNe Feature
Minimum required = 0
Maximum allowed = 1
Prerequisite = None
Co-requisite = None

The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM mainframe and iSeries computers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers or over distributed SNA networks using the Coax/Twinax Adapter for SCS with a coaxial or twinaxial cable connected printer.

Detailed information on this feature is provided below. This feature is installed in the optional firmware slot. It supports monochrome printing only.

IPDS is only supported for Single Byte Character Set and does not support Double Byte Character Set.

Differences Between These Printer's IPDS and Previous IBM Printers

The Infoprint 1226 has a different level IPDS support than the previous IBM workgroup printers. Some key differences are:

For emulation, the Infoprint 11xx printers emulate the 4028, 4312, 4317, 4324, 3812/16, and 3112/16. These are LF1 emulations ONLY.

Infoprint 1226 does not support "Manage IPDS Dialog".

Details on Card for IPDS and SCS/TNe Emulation

Product Overview:

The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident Web server, a browser and the printer's IP address.

For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.

These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM iSeries applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).

IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:

Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.

Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.

No changes to host applications.

Supports emulation of common IBM IPDS and SCS printers.

Additional or new remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.

One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or iSeries documents (AFP/IPDS, SCS).

With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an iSeries or System/390 computer.

With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or iSeries host printer. See the compatibility section for details.

With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an iSeries or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the compatibility section for more details.

For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145 and 1226) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.

The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.

The IPDS emulation supports the IPDS data and resource towers. SBCS fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.

The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.

Fonts

AFP/IPDS Font and Typestyle Support:

The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).

The following languages are supported:

Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English

Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian

Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian

Greek

Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.

The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.

The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.

The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.

The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.

Font Capture

Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.

PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.

Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.

If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.

The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.

iSeries

On the iSeries, Font capture is supported by OS/400 V4R5 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG/CHGPSFCFG), set FNTCAPTURE (*YES).

Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Verify that *YES is specified for the Font Capture attribute. Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.

For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.

Mainframe (OS/390 or z/OS)

Font capture is supported by PSF for OS/390 or z/OS. Use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.

Font capture is supported by PSF for OS/390 or z/OS 2.2.1 with APAR DY43969. With PSF for OS/390 or z/OS, use APSRMARK to mark eligible fonts if they are not already marked.

SCS Font and Typestyle Support

The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.

On the iSeries, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.

A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.

These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).

Compatibility

For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.

Notes:

Microcode updates and User's Guides are available from the IBM Web site.

See the appropriate User's Guide for configuration instructions.

When the printer is emulating an IBM printer, the function supported depends on the IBM host software.

For Direct Network Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:
Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
MarkNet(tm) N2000 Series print servers
MarkNet X2000 Series print servers (AFP/IPDS only)
MarkNet Pro print servers (AFP/IPDS only)

The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.

Notes:

MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.

For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.

Any MarkNet X2000 microcode level provides AFP/IPDS supportp only.

For IPDS printing, a minimum of 16MB of printer memory is required.

Software Compatibility for AFP/IPDS Printing over TCP/IP

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:
OS/400 V4R5, V5R1 or later through PSF/400 (See Note).

Note: With OS/400 V4R5 or OS/400 V5R1, to print IPDS over TCP/IP through PSF/400.

Software Compatibility for SCS LU1 Printing over TCP/IP

The IBM iSeries software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:
OS/400 V4R5, V5R1 or later with all PTFs applied

Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same.

The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:

IBM Communications Server (CS) for OS/390 or z/OS Version 2 Release 5 or later on ESA systems

TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)

TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature

Using Cisco 7500 Series Routers

Note: All appropriate APARs must be applied.

SCS LU1 Printing using a Gateway and TCP/IP

If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or iSeries. Examples of these gateways are:

IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp

Microsoft NetResults SNA Server 4.0

Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server

Attachmate E-Vantage SNA Gateway 2.0

Barr Systems Communications Server

Cisco TN3270 Server

OpenConnect using the WebConnect SNA Access Server or SNA Print Server

For Direct Twinaxial Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS with a twinaxial cable, the printer attaches to the following IBM hardware:
iSeries servers and e-systems
iSeries Twinaxial Workstation Controllers
iSeries Advanced System/36 Twinaxial Workstation Controller
5494 Remote Control Unit
5394 Remote Control Unit

Notes:

Coax/Twinax Adapter for SCS microcode level H02-8491 or later is required.

There must be two separate twinax addresses, one for the SCS emulation using the Adapter for SCS and another for the Card's IPDS emulation. The Adapter for SCS does not require the Card for IPDS and SCS/TNe to support SCS.

The Coax/Twinax Adapter for SCS provides SCS data stream support for a twinax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

For Direct Coaxial Attachment - Hardware Compatibility

When the printer contains the Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:
IBM 3174 Control Unit
ES/9000 Work Station Subsystem Controller
IBM 3174 compatible control units

Notes:

Coax/Twinax Adapter for SCS microcode level H01-9072 or later is required.

The Coax/Twinax Adapter for SCS provides SCS data stream support for a coax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

For Direct Coaxial Attachment - Software Compatibility

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:

Any application or host software that generates the AFP/IPDS data stream for one of the emulated printers such as:
PSF/VSE V2.2.1
PSF/VM V2.1.1 (with maintenance)
GDDM V2.3 with APARs
RSCS V3.2 or later
(P/N 75P6444) ImageQuickTM Card Feature (Infoprint 1145)
Minimum required = 0, maximum allowed = 1
Prerequisite = none, Co-requisite = none

The ImageQuick Option Card enables the Infoprint 1332/1352 laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.

(P/N 75P6857) 802.11g Wireless to Ethernet
Minimum required = 0, maximum allowed = 1,
Prerequisite = network model or model with internal Ethernet card, Co-requisite = none

The IBM 802.11g Wireless to Ethernet allows customers to quickly place Ethernet-capable workgroup printers or multifunction priners (MFPs) on a wireless network. This wireless print adapter is a bridge that uses the existing Ethernet port of the printer or MFP, which in turn provides a wireless solution that is flexible and easy to use. It supports both 802.11b and 802.11g wireless standards. This feature includes one Ethernet (RJ-45) port for connection to the printer.

Very few steps are required to configure the 802.11g adapter. A setup utility is not needed, as the setup is done using your Windows-based browser. The 802.11g Wireless Print Adapter is also supported in a Mac OS X environment using the printer or MFP Zero Configuration networking, that allows automatic printer discovery to make it easier for users to locate devices on a network.

By using the existing Ethernet on the printer or MFP, the adapter supports all the networking capabilities the internal Ethernet card provides. This includes TCP/IP printing support (including port 9100 printing) and printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows the adapter to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.

Since the 802.11g wireless to Ethernet is transparent to MarkVision Professional, all mass management capabilities available in printers and MFPs are available to the administrator when using the 802.11g wireless to Ethernet. In addition to these capabilities, the device includes an embedded web server.

An embedded web server allows administrators to easily manage the wireless adapter through a standard web browser. While settings on the adapter are optimized for most environments, through a web browser an administrator can easily make changes to the device.
(P/N 75P6854) 802.11g Wireless to USB
Minimum required = 0, maximum allowed = 1,
Prerequisite = none, Co-requisite = none

The 802.11g Wireless to USB is a Wi-Fi Certified device supporting both 802.11b and 802.11g networking technologies and offers a USB 2.0 Full Speed port to connect to the printer. Its WPA personal security offers a high level of protection for value conscious consumers.

Setup is a breeze with this print server. In Microsoft Windows environments (98SE and above), it offers an intuitive setup wizard to guide the user through installation of most printers.

The 802.11g Wireless to USB also provides an easy installation for Mac OS X environments using Zero Configuration networking which allows automatic printer discovery, making it easier for users to locate devices on a network.

By offering TCP printing support (including port 9100 printing), this feature provides network printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows this feature to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.

An embedded web server allows administrators to easily manage the print server through a standard web browser. While settings on the print server are optimized for most environments, through a web browser an administrator can easily make changes to the device. Customizable settings allow the network administrator to get the most from this feature.

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

Windows is a trademark of Microsoft Corporation.

UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
IBM Corporation 2005.