IBM Infoprint 1145 & 1145n (4545-001 & 4545-N01)

 
 
 
 


IBM Infoprint 1145 Printer
IBM 4545-001 Infoprint 1145 Printer
Fully refurbished with 1-year warranty
4545-001 28p1800
$695.00


IBM Infoprint 1145n Printer
IBM 4545-N01 Infoprint 1145n Printer with 10/100 Ethernet
Fully refurbished with 1-year warranty
4545-N01 28P1802
$695.00


IBM Infoprint 1145dn Printer
IBM 4545-DN1 InfoPrint 1145dn With Duplex And 10/100 Ethernet
Fully refurbished with 1-year warranty
4545-DN1 28p1808 28P1804
$725.00


IBM Infoprint 1145MFP Printer


Add multifunction to your IBM 1145 -- 4890-001 M35
Finisher Parts

IBM InfoPrint 1145 (4545) Laser Printer

Accessories

Toner for IBM 1145
28P1882 High Yield Return Toner Cartridge
New
28P1882 30K Page Yield (New)

Retired, no longer available: Contact for alternatives



28p1882 Toner for IBM (4545) 1145
New
28P1882 30K Page Yield Compatible (New)
$145.00



28p1882 MICR Toner for 1145 (4545)
New
28p1882 MICR 30K Page yield Compatible (New)
$188.00


Fuser Usage Maintenance Kit
28P1883 IBM Fuser Usage Kit 1145
New
28p1883 (New)
$899.00



28P1883 Fuser Usage Kit IBM 1145
Fully refurbished with 90-day warranty
28P1883
$499.00



28p1883 IBM Fuser Usage Kit 1145
Fully refurbished with 90-day warranty
28p1883 Advanced Exchange
$399.00


Duplexer for IBM 4545 (1145)
28P1830 Duplexer for IBM 4545 (1145)
Fully refurbished with 90-day warranty
28P1830
$95.00



28P1831 Envelope feeder for 4545 (1145)
New
28P1831 (New)
$190.00



28P1831 Envelope feeder for 4545 (1145)
Fully refurbished with 90-day warranty
28p1831
$142.00


2500 Sheet Input Feeder IBM IP 1145
28P1832 2500 Sheet Input Feeder IBM IP 1145 (4545)
Fully refurbished with 90-day warranty
28P1832
$249.00




3000 Sheet Finisher For 4545
28P1833 3000 Sheet Finisher For 4545 (1145)
Fully refurbished with 90-day warranty
28P1833


3000 Sheet Finisher For 4545

Token ring
28P1835 Token Ring
Fully refurbished with 90-day warranty
28P1835

Retired, no longer available: Contact for alternatives



28P1836 Token-Ring-3 Port
New
28P1836 (New)
$285.00



28P1837 10BaseT/2
Fully refurbished with 90-day warranty
28P1837


10/100 Ethernet for IBM InfoPrint
28p1838 10/100 Ethernet for IBM InfoPrint
Fully refurbished with 90-day warranty
28P1838
$148.00


Ethernet 10/100BaseTX-1 Port
28P1839 Ethernet 10/100BaseTX-1 Port
Fully refurbished with 90-day warranty
28P1839
$266.00


 Ethernet 10/100TX/10Base2 1 Pt


Coax/Twinax Adapter
28p1842 Coax/Twinax Adapter
Fully refurbished with 90-day warranty
28P1842
$237.00


Tri-Port Adapter
28p1843 Tri-Port Adapter
Fully refurbished with 90-day warranty
28P1843
$75.00



28P1844 Infrared Adapter
Fully refurbished with 90-day warranty
28P1844
$45.00



28P1845 External Serial Attachment
Fully refurbished with 90-day warranty
28P1845
$95.00




4 MB Memory DIMM
28P1847 4 MB Memory DIMM
Fully refurbished with 90-day warranty
28P1847
$16.00


8MB Memory
28P1848 8MB Memory
Fully refurbished with 90-day warranty
28P1848
$20.00


16MB Memory
28P1849 16MB Memory
Fully refurbished with 90-day warranty
28P1849
$29.00



28P1849 16MB Memory
New
28P1849 (New)
$39.00


16MB Memory
28P1850 32MB Memory
New
28P1850 (New)
$88.00



28P1850 32MB Memory
Fully refurbished with 90-day warranty
28P1850
$20.00


32MB Memory
28P1851 64MB Memory
New
28P1851 Compatible (New)
$95.00



28P1851 64MB Memory
Fully refurbished with 90-day warranty
28P1851
$46.00


64MB Memory
28P1852 Infoprint Brand 128MB Memory
New
28P1852 (New)
$277.00



28P1852 128MB Memory
Fully refurbished with 90-day warranty
28P1852
$65.00


Infoprint Brand 128MB Memory
28P1853 2 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1853
$25.00


2 MB Flash DIMM
28P1854 4 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1854
$124.00


4 MB Flash DIMM
28P1855 8 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1855
$148.00


8 MB Flash DIMM
28P1856 16MB Flash DIMM
New
28p1856 (New)
$69.00





28P1858 5GB+ Hard Drive w/ Adapter
Fully refurbished with 90-day warranty
28P1858
$39.00


16 MB Flash DIMM
75P6445 IPDS/SCS/TNE For 1145 4545
Fully refurbished with 90-day warranty
75P6445
$99.00





28P2598 IPDS/SCS/TNE For IP1145
Fully refurbished with 90-day warranty
28P2598
$119.00



28P2598 IPDS/SCS/TNE For IP 1145
New
28P2598 (New)
$237.00


IPDS/SCS/TNE For 1145 4545
28P2599 ImageQuick** Card
New
28P2599 (New)
$89.00


ImageQuick Card
28P1861 Bar Code Card
New
28P1861 (New)
$285.00



28p1861 Bar Code Card
Fully refurbished with 90-day warranty
28p1861
$190.00


Bar Code Card
28P1862 Optra Forms Software
New
28P1862 (New)

Retired, no longer available: Contact for alternatives


Optra Forms Software
28P1863 Optra Forms Director Software
New
28P1863 (New)

Retired, no longer available: Contact for alternatives


Optra Forms Director Software
28P1864 Optra Forms 2MB Flash DIMM
Fully refurbished with 90-day warranty
28p1864
$223.00


Optra Forms 2MB Flash DIMM
28P1865 4MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1865
$247.00


4MB Optra Forms Flash Memory
28P1866 8MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1866
$247.00


8MB Optra Forms Flash Memory
28P1867 16MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1867
$427.00


16MB Optra Forms Flash Memory
28P1868 Optra Forms** Hard Disk 5+GB
New
28P1868 (New)
$195.00



28P1869 Optra Forms** 2-Key Security

28P1870 Optra Forms** 3-Key Security

28P1871 10 ft. Parallel Cable 1284
Fully refurbished with 90-day warranty
28p1871
$12.00



28P1872 20 ft. Parallel Cable

28P1873 Parallel 1284 A-C Cable 3M
Fully refurbished with 90-day warranty
28P1873



28P1874 50 ft. Serial Cable



28P1876 Printer Stand

Note: (1) Supplies item.

Rugged and high speed -- the IBM Infoprint 1145 is ideal for large workgroups who demand high reliability and support for a wide range of applications.

  • Easy to install high-yield cartridges help keep operating costs down
  • Wide range of connectivity solutions help ensure high speed communications and broad compatibility
  • Optional finisher offers stacking, stapling and hole punching to maximize productivity
  • Supports a variety of media sizes including large format (A3) for user flexiblity
  • ImageQuick option ensures quality printing of Web and Intranet-based images as well as HTML, PDF, TIFF and other popular formats directly to your Infoprint 1145

Technical Specifications

Maximum speed pages per minute (ppm) 45 ppm
Technology A3 Monochrome laser
Maximum monthly usage 250,000 pages
Processor 350 MHz
Print resolution 300, 600, 1200 dpi
Memory (std/max) Options 32/384 MB Hard Drive/Flash
Paper input capacity (std/max) 1,035/3,535 pages
Paper output capacity (std/max) 500/3,550 pages
Duplex Option
PC-interface (standard) USB/Parallel
Printer attachments
Standard USB port, bidirectional parallel port (base model)
Two internal solutions ports
Optional Internal Ethernet 10BaseT/2, Ethernet 10/100BaseTX, Twinax/Coax Adapter for SCS, Token Ring, Tri-Port Adapter, RS-232 Serial/Parallel 1284-C Interface Card
External Ethernet 10/100BaseTX - 1 port, Ethernet 10/100BaseTX - 3 port, Ethernet 10/100BaseTX 10Base2 - 1 port, Token Ring - 3 port, Infrared Adapter, External Serial Adapter
Media Sizes
Standard Letter, legal, A3, A4, A5, JIS B4, B5 executive, statement, folio, universal, envelopes
Expanded Custom Sizes
Media
Types Plain paper, bond, envelopes, card stock, transparencies, labels
Weight 16 lb to 90 lb
Network Environment Microsoft Windows XP, 2000, Me, 98, 95, NT 4.0 or higher; UNIX, Linux and Mac OS
Physical Characteristics (WxDxH) 35.5" x 22" x 19"
Environmental Characteristics 54 dBA 33 dBA (idle)
Toner Yield (std/high yield) 30,000 Toner Cartridge
First Page Out Time <4 sec (Ready) <7 sec (Standby)

The IBM 4545 Infoprint 1145 is a 45-page-per-minute monochrome laser printer that specializes in complex applications for large workgroups. Designed with "flexibility" in mind, this printer can sit on a desktop for simple applications or be made into a floor-standing unit with a 2,500-sheet high capacity paper input. If complex finishing is required, this printer offers output devices that staple in multiple positions, offset jogs output for easy retrieval, and can hole punch in a variety of locations.

The most popular networking options are available, including Fast Ethernet 10/100 BaseTX and Token-Ring. Infrared, LocalTalk, and Serial connections are also available. Many of IBM's customers prefer the Intelligent Printer Data Stream (IPDS) datastream, which the Infoprint 1145 successfully supports.

With its high speed and first page out time as fast as 4 seconds, this printer is a winner with large workgroups with high levels of expectation.

Model Abstract 4545-001

The IBM 4545 Infoprint 1145 model 001 is the low voltage, base model, that includes 32 MB of memory standard and three available memory slots to support a maximum of 384 MB of SDRAM memory.

Model Abstract 4545-N01

The IBM 4545 Infoprint 1145 model N01 is the low voltage, networked model, that includes a 10/100BaseTX Fast Ethernet card, 64 MB of memory standard, and three available memory slots to support a maximum of 384 MB of SDRAM memory.

Model Abstract 4545-DN1

The IBM 4545 Infoprint 1145 model DN1 is the low voltage, duplex/networked model, that includes a 10/100BaseTX Fast Ethernet card, 64 MB of memory standard, three available memory slots to support a maximum of 384 MB of SDRAM memory, and a duplex option.

Highlights

The IBM Infoprint 1145 is IBM's fastest, most rugged monochrome laser printer to date. With powerful speed (45 pages per minute), fast first page out time, excellent print quality and incredible durability, this is a printer that large workgroups will demand. Benefits include:

  • High-speed desktop or floor-standing laser printer
  • Fast first page out time as fast as 4 seconds
  • High-capacity input, output, and creative finishing options
  • Fast Ethernet and Token-Ring networking capability
  • Universal Serial Bus (USB) and Parallel interfaces standard, LocalTalk, Serial, and Infrared interfaces optional
Description

The IBM Infoprint 1145 is an A3/Ledger laser printer with fast print speed of up to 45 pages per minute and finishing capability.

Infoprint 1145 media handling capabilities include:

  • Two 500-sheet input trays and one 35-sheet auxiliary tray standard for a total of 1,035-sheets standard input capacity
  • Optional 2,500-sheet High Capacity Feeder for a 3,535-sheet maximum input capacity
  • Optional duplex capability for two-sided printing
  • Optional finisher with stacking/stapling/hole punching
  • 500-sheet standard output capacity and 3,550-sheet maximum output capacity with finisher installed

Usage Rates

The maximum monthly usage for Infoprint 1145 is 200,000 impressions. IBM does not recommend printing to this monthly maximum on a consistent basis.

High-Performance Controller

Infoprint 1145 controller has a 350 MHz PMC-Sierra RM5231A processor and a 100 MHz internal data bus. It comes with PCL 6, PostScript 3, and Page Printer Data Stream (PPDS) standard, and IPDS is available as an option.

  • Memory:
    • Base printer models (001/002) have 32 MB SDRAM standard.

      This standard memory is soldered on the controller board. There are three memory slots available for SDRAM memory and flash memory. The controller supports a maximum of 384 MB of SDRAM memory (total of soldered and memory slots).

    • Network printer models (n01/n02) and Duplex models (dn1/dn2) have 64 MB SDRAM standard.

      This standard memory is soldered on the controller board. There are three memory slots available for SDRAM memory and flash memory. The controller supports a maximum of 384 MB of SDRAM memory (total of soldered and memory slots).

  • Printer system attachment interfaces:
    • Base printer models (001/002) have an IEEE 1284 Parallel interface with a Type B connector and a USB interface as standard.
    • Network printer models (n01/n02) and duplex models (dn1/dn2) have an USB interface and integrated 10/100BaseTX Fast Ethernet interface standard.

Print Quality

The Infoprint 1145 supports the following print resolutions:

  • 1200 Image Quality
  • 600 x 600 dpi (dots per inch)
  • 300 x 300 dpi

The Toner Darkness setting offers ten user-selectable settings to balance print darkness and toner savings. The higher the setting the darker the print. Within the range of print darkness settings, up to 50% toner savings can be realized from the factory default setting of six. The Toner Darkness setting is available through the operator panel under the Print Quality menu and also accessible from the print driver.

Font Support

Infoprint 1145 resident fonts include support for the following:

Emulation # of Scalable Fonts # of Bitmapped Fonts
---------- ------------------- --------------------
PCL 6 84 2
PostScript 156 0
PPDS 39 5

For Direct Network Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:

  • Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
  • MarkNet(tm) N2000 Series print servers
  • MarkNet X2000 Series print servers (AFP/IPDS only)
  • MarkNet Pro print servers (AFP/IPDS only)

The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.

Notes

  1. MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.
  2. For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.
  3. Any MarkNet X2000 microcode level provides AFP/IPDS support only.
  4. For IPDS printing, a minimum of 16MB of printer memory is required.

For Direct Twinaxial Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS (P/N 44H0011) with a twinaxial cable, the printer attaches to the following IBM hardware:

  • AS/400e servers and e-systems
  • AS/400 Twinaxial Workstation Controllers
  • AS/400 Advanced System/36 Twinaxial Workstation Controller
  • 5494 Remote Control Unit
  • 5394 Remote Control Unit

Notes

  1. Coax/Twinax Adapter for SCS (P/N 44H0011) microcode level H02-8491 or later is required.
  2. There must be two separate twinax addresses, one for the SCS emulation using the Adapter for SCS and another for the Card's IPDS emulation. The Adapter for SCS does not require the Card for IPDS and SCS/TNe to support SCS.
  3. The Coax/Twinax Adapter for SCS provides SCS data stream support for a twinax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:

  • AS/400 PSF/400 V4R5, V5R1 or later
  • AS/400 OS/400 V4R5, V5R1
  • AS/400 OS/400 V4R5, V5R1 or later
  • AS/400 SSP Release 7.1
  • IPDS Advanced Function PRPQ is required if using the Card for IPDS

When the printer contains the Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:

  • IBM 3174 Control Unit
  • ES/9000 Work Station Subsystem Controller
  • IBM 3174 compatible control units

Note: Coax/Twinax Adapter for SCS microcode level H01-9072 or later is required.

Note: The Coax/Twinax Adapter for SCS provides SCS data stream support of a coax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

When the printer contains the optional Coax/Twinax Adapter for SCS with a twinaxial cable, the printer attaches to the following IBM hardware:

  • AS/400e servers and e-systems
  • AS/400 Twinaxial Workstation Controllers
  • AS/400 Advanced System/36 Twinaxial Workstation Controller
  • 5494 Remote Control Unit
  • 5394 Remote Control Unit

When the printer contains the optional Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:

  • IBM 3174 Control Unit
  • ES/9000 Work Station Subsystem Controller
  • 3174 compatible control units

Performance Specifications

The maximum print speeds are shown in the following table. Actual performance depends on:

  • Interface to the host (serial, parallel, network)
  • Host system and application
  • Network complexity and traffic
  • Page complexity and content
  • Certain printer options installed and selected
  • Printer memory
  • Media size, media type setting and tray source
Media Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Aux Tray
------------------ -------- -------- -------- -------- -------- --------
Simplex Printing (pages per minute)
Letter LEF 45 ppm 45 ppm 44 ppm 43 ppm 41 ppm 36 ppm
A4 LEF 45 ppm 45 ppm 44 ppm 43 ppm 41 ppm 36 ppm
Executive LEF 45 ppm 45 ppm 44 ppm 43 ppm 41 ppm 36 ppm
Statement LEF 45 ppm 45 ppm 44 ppm 43 ppm 41 ppm 36 ppm
A5 LEF 45 ppm 45 ppm 44 ppm 43 ppm 41 ppm 36 ppm
B5-JIS LEF 45 ppm 45 ppm 44 ppm 43 ppm 41 ppm 36 ppm
B4-JIS SEF 28 ppm 27 ppm 27 ppm N/S N/S 25 ppm
Folio SEF 28 ppm 27 ppm 27 ppm N/S N/S 25 ppm
Legal SEF 28 ppm 27 ppm 27 ppm N/S N/S 25 ppm
Ledger 24 ppm 24 ppm 24 ppm N/S N/S 22 ppm
A3 SEF 24 ppm 24 ppm 24 ppm N/S N/S 22 ppm

Duplex Printing (impressions per minute)
Letter LEF 38 ipm 37 ipm 36 ipm 29 ipm 24 ipm 35 ipm
A4 LEF 38 ipm 37 ipm 36 ipm 29 ipm 24 ipm 35 ipm
Executive LEF 38 ipm 37 ipm 36 ipm 29 ipm 24 ipm 35 ipm
Statement LEF 38 ipm 37 ipm 36 ipm 29 ipm 24 ipm 35 ipm
A5 LEF 38 ipm 37 ipm 36 ipm 29 ipm 24 ipm 35 ipm
B5-JIS LEF 38 ipm 37 ipm 36 ipm 29 ipm 24 ipm 35 ipm
B4-JIS SEF 17 ipm 17 ipm 17 ipm N/S N/S 16 ipm
Folio SEF 17 ipm 17 ipm 17 ipm N/S N/S 16 ipm
Legal SEF 17 ipm 17 ipm 17 ipm N/S N/S 16 ipm
Ledger 16 ipm 16 ipm 16 ipm N/S N/S 15 ipm
A3 SEF 16 ipm 16 ipm 16 ipm N/S N/S 15 ipm

Note: LEF = Long Edge Feed
Note:
SEF = Short Edge Feed
Note:
N/S = Media size not supported in this tray Speeds are for 300, 600, and 1200IQ dpi using plain paper setting. Actual speed will vary with other media type settings.

First Print-Out Times (FPOT) are shown in the following table.

Paper Source FPOT (seconds)
------------ --------------
Tray 1 4.0
Tray 2 4.8
Tray 3 5.1
Tray 4 6.0
Tray 5 7.2

Note: FPOT is defined as the time when the print engine receives the Start Command from the printer controller to when the trailing edge of the first sheet exits the printer's exit feed rollers into the output bin. All measurements are with letter size paper, Long Edge Feed (LEF), standby mode.

Usage Rates

The maximum monthly usage for Infoprint 1145 is 200,000 impressions. IBM does not recommend printing to this monthly maximum on a consistent basis.

Stapling Capability

Parameter Capability
------------------- ---------------------------------------------
Staple capacity 5,000 staples
Staple low sensing Yes, approximately 40 staples left
Staple out sensing Yes
Maximum packet size 50 sheets(20lb/75g/m2, A4/Letter, plain paper
Staple output bin Finisher Bin #2 only

Hole Punch Capability

Parameter Capability
-------------------------- -------------------------------------------
Letter Size Standard 3-hole punch
A4 Size Standard 4-hole punch
Collector Box full sensing Yes
Maximum packet size Holes punched one sheet at a time until bin is full
Hole punch output bin Finisher Bin 1 or 2

Offset Stacking

Offset stacking of 15 mm (0.6 in.) can be set in the printer for job or copy boundary. When multiple copies are selected in certain applications or operating environments, the document is sent multiple times to the printer and would be treated as separate print jobs. Offset stacking in the printer Standard Bin is 30mm (1.18 in.).

Finisher Limitations

  • The Finisher requires the High Capacity Feeder or Printer Stand be installed
  • Maximum paper size for both bins is 11.7 x 17.0 (297mm x 432mm)
  • Universal media output size is not supported
  • Stapling may reduce output bin capacity
  • The hole punch configuration is factory set and not user or field configurable
  • The hole punch does not support transparency, labels or card stock
  • The capacity of the printer Standard Bin is reduced to 300 sheets (20lb/75g/m2, A4/Letter, plain paper) with the Finisher installed

Print Area

The Infoprint 1145 printable area is limited to within 4.0mm (0.16 in) of the edges of the media. Any information placed outside this specified printable area will not print.

Data Streams

The Infoprint 1145 supports the following data streams:

  • PostScript Level 3 Emulation
  • Hewlett-Packard Company PCL 6 Emulation
  • Optional IPDS (Intelligent Printer Data Stream)
  • PPDS (Page Printer Data Stream) Migration Tool

Fonts and Symbol Sets

The printer's resident fonts include support for languages that use the following character sets:

  • Latin 1 (US, Western Europe, etc)
  • Latin 2 (Eastern Europe)
  • Latin 5 (Turkish)
  • Latin 6 (Baltic)
  • Cyrillic
  • Greek
  • Japanese (Katakana characters only)

There are 83 symbol sets in the PCL 6 emulation to support all the languages that use these characters. The symbol set names are listed below. Not all symbol sets are supported by all fonts. Refer to the Technical Reference manual or use the printer operator panel to find which symbol sets are supported by each font.

Support for the euro currency character is included in all applicable fonts for both the PostScript and PCL emulations. Twelve of the PCL symbol sets support the euro character including all seven Windows symbol sets.

The following table lists the number of fonts available in each emulation. The typeface names are shown below.

Emulation # of Scalable Fonts # of Bitmapped Fonts
---------- ------------------- --------------------
PCL 6 84 2
PostScript 156 0
PPDS 39 5

The fonts in the PCL emulation are compatible with the fonts in the HP4500 and include four additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with Adobe PostScript 3 and include 20 additional fonts.

Additional fonts can be downloaded to the printer RAM or optional Flash DIMM or Hard Disk. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts, and PPDS emulation supports only downloadable bitmapped fonts. Font cards and font cartridges are not supported.

Included on the CD-ROM shipped with the printer are a variety of downloadable fonts for Hebrew and Arabic.

Also included on the CD-ROM is the FontVision Font Management utility and screen fonts to match the resident scalable fonts. An additional 48 TrueType fonts are available on the IBM web site when a customer registers the printer.

PostScript 3 Fonts

Note: Font order is partially alphabetical and partially functional.

156 scalable fonts
------------------------
AlbertusMT
AlbertusMT-Italic
AlbertusMT-Light
AntiqueOlive-Roman
AntiqueOlive-Italic
AntiqueOlive-Bold
AntiqueOlive-Compact
ArialMT
Arial-ItalicMT
Arial-BoldMT
Arial-BoldItalicMT
AvantGarde-Book
AvantGarde-BookOblique
AvantGarde-Demi
AvantGarde-DemiOblique
Bookman-Light
Bookman-LightItalic
Bookman-Demi
Bookman-DemiItalic
Coronet-Regular
Courier
CourierPS
Courier
Courier-Oblique
Courier-Bold
Courier-BoldOblique
CourierPS Bold Oblique
Courier-BoldOblique
Garamond-Antiqua
Garamond Halbfett
Garamond-Kursiv
Garamond-KursivHalbfett
Helvetica-Light
Helvetica-LightOblique
Helvetica-Black
Helvetica-BlackOblique
Helvetica
Helvetica-Oblique
Helvetica-Bold
Helvetica-BoldOblique
Helvetica-Narrow
Helvetica-Narrow-Oblique
Helvetica-Narrow-Bold
Helvetica-Narrow-BoldOblique
Intl-CG-Times
Intl-CG-Times-Italic
Intl-CG-Times-Bold
Intl-CG-Times-BoldItalic
Intl-Univers-Medium
Intl-Univers-MediumItalic
Intl-Univers-Bold
Intl-Univers-BoldItalic
Intl-Courier
Intl-Courier-Oblique
Intl-Courier-Bold
Intl-Courier-BoldOblique
LetterGothic
LetterGothic-Slanted
LetterGothic-Bold
LetterGothic-BoldSlanted
Marigold
NewCenturySchlbk-Roman
NewCenturySchlbk-Italic
NewCenturySchlbk-Bold
NewCenturySchlbk-BoldItalic
Optima
Optima-Bold
Optima-BoldItalic
Optima-Italic
Palatino-Roman
Palatino-Italic
Palatino-Bold
Palatino-BoldItalic
Symbol
Times-Roman
Times-Italic
Times-Bold
Times-BoldItalic
TimesNewRomanPSMT
TimesNewRomanPS-ItalicMT
TimesNewRomanPS-BoldMT
TimesNewRomanPS-BoldItalicMT
Univers
Univers-Oblique
Univers-Bold
Univers-BoldOblique
Univers-Condensed
Univers-CondensedOblique
Univers-CondensedBold
Univers-CondensedBoldOblique
Wingdings-Regular
ZapfChancery-MediumItalic
ZapfDingbats
Univers-Extended
Univers-ExtendedObl
Univers-BoldExt
Univers-BoldExtObl
Univers-Light
Univers-LightOblique
Clarendon
Clarendon-Light
Clarendon-Bold
Helvetica-Condensed
Helvetica-Condensed-Bold
Helvetica-Condensed-BoldObl
Helvetica-Condensed-Oblique
StempelGaramond-Bold
StempelGaramond-BoldItalic
StempelGaramond-Italic
StempelGaramond-Roman
Apple-Chancery
Chicago
Geneva
Monaco
NewYork
Oxford
Taffy
MonaLisa-Recut
Candid
Bodoni
Bodoni-Italic
Bodoni-Bold
Bodoni-BoldItalic
Bodoni-Poster
Bodoni-PosterCompressed
CooperBlack
CooperBlack-Italic
Copperplate-ThirtyTwoBC
Copperplate-ThirtyThreeBC
Eurostile
Eurostile-Bold
Eurostile-ExtendedTwo
Eurostile-BoldExtendedTwo
GillSans
GillSans-Italic
GillSans-Bold
GillSans-BoldItalic
GillSans-Condensed
GillSans-BoldCondensed
GillSans-Light
GillSans-LightItalic
GillSans-ExtraBold
Goudy
Goudy-Italic
Goudy-Bold
Goudy-BoldItalic
Goudy-ExtraBold
HoeflerText-Regular
HoeflerText-Italic
HoeflerText-Black
HoeflerText-BlackItalic
HoeflerText-Ornaments
JoannaMT
JoannaMT-Italic
JoannaMT-Bold
JoannaMT-BoldItalic
LubalinGraph-Book
LubalinGraph-BookOblique
LubalinGraph-Demi
LubalinGraph-DemiOblique

PCL 6 Fonts

Note: Font order is partially alphabetical and partially functional.

84 scalable fonts
----------------------
Albertus Medium
Albertus Extra Bold
Antique Olive
Antique Olive Italic
Antique Olive Bold
Arial
Arial Italic
Arial Bold
Arial Bold Italic
ITC Avant Garde Book
ITC Avant Garde Book Oblique
ITC Avant Garde Demi
ITC Avant Garde Demi Oblique
ITC Bookman Light
ITC Bookman Light Italic
ITC Bookman Demi
ITC Bookman Demi Italic
Clarendon Condensed Bold
Coronet
CourierPS
CourierPS Oblique
CourierPS Bold
CourierPS Bold Oblique
CG Omega
CG Omega Bold
CG Omega Italic
CG Omega Bold Italic
Garamond Antiqua
Garamond Halbfett
Garamond Kursiv
Garamond Kursiv Halbfett
Helvetica Light
Helvetica Light Oblique
Helvetica Black
Helvetica Black Oblique
Helvetica
Helvetica Italic
Helvetica Bold
Helvetica Bold Italic
Helvetica Narrow
Helvetica Narrow Italic
Helvetica Narrow Bold
Helvetica Narrow Bold Italic
CG Times
CG Times Italic
CG Times Bold
CG Times Bold Italic
Univers Medium
Univers Medium Italic
Univers Bold
Univers Bold Italic
Courier
Courier Italic
Courier Bold
Courier Bold Italic
Letter Gothic
Letter Gothic Italic
Letter Gothic Bold
Marigold
Century Schoolbook Roman
Century Schoolbook Italic
Century Schoolbook Bold
Century Schoolbook Bold Italic
Palatino Roman
Palatino Italic
Palatino Bold
Palatino Bold Italic
SymbolPS
Symbol
Times Roman
Times Italic
Times Bold
Times Bold Italic
Times New Roman
Times New Roman Italic
Times New Roman Bold
Times New Roman Bold Italic
Univers Condensed Medium
Univers Condensed Medium Italic
Univers Condensed Bold
Univers Condensed Bold Italic
Wingdings
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbats
ZapfDingbats
2 bitmapped fonts
Line Printer 16
POSTNET Barcode

PPDS Fonts

Note: Font order is partially alphabetical and partially functional

39 scalable fonts
-----------------------
AvantGarde-Book
AvantGarde-BookOblique
AvantGarde-Demi
AvantGarde-DemiOblique
Bookman-Light
ITC Bookman Light
Bookman-Light
Bookman-LightItalic
Bookman-Demi
Bookman-DemiItalic
Courier
Courier-Oblique
Courier-Bold
Courier-BoldOblique
Helvetica-Light
Helvetica-LightOblique
Helvetica-Black
Helvetica-BlackOblique
Helvetica
Helvetica-Italic
Helvetica-Bold
Helvetica-BoldItalic
Helvetica-Narrow
Helvetica-Narrow-Italic
Helvetica-Narrow-Bold
Helvetica-Narrow-BoldItalic
CenturySchlbk-Roman
CenturySchlbk-Italic
CenturySchlbk-Bold
CenturySchlbk-BoldItalic
Palatino-Roman
Palatino-Italic
Palatino-Bold
Palatino-BoldItalic
Symbol
TimesNewRoman
TimesNewRoman-Italic
TimesNewRoman-Bold
TimesNewRoman-BoldItalic
ZapfChancery-MediumItalic
ZapfDingbats
5 bitmapped fonts
Courier 10
Courier 12
Courier 17.1
Courier 10 Bold
Boldface PS

Symbol Sets

Symbol Set Names
----------------------------
ABICOMP Brazil/Portugal
ISO 8859-1 Latin 1 (ECMA-94)
Math-8
ABICOMP International
ISO 8859-2 Latin 2
Greek-8
DeskTop
ISO 8859-5 Latin/Cyrillic
Turkish-8
Legal
ISO 8859-7 Latin/Greek
Roman-8
MC Text
ISO 8859-9 Latin 5
Roman-9
Microsoft Publishing
ISO 8859-10 Latin 6
Roman Extension
Russian-GOST
ISO 8859-15 Latin 9
Ukrainian
Ventura ITC Zapf Dingbats
PCL ITC Zapf Dingbats
PC-8 Bulgarian
Ventura International
PS ITC Zapf Dingbats
PC-8 Danish/Norwegian (437N)
Ventura Math
PS Math
PC-8 Greek Alternate (437G)
Ventura US
PS Text
PC-8 Turkish (437T)
Pi Font
PC-8 Latin/Greek
Windows 3.0 Latin 1
Symbol
PC-8 PC Nova
Windows 98 Cyrillic
Wingdings
PC-8 Polish Mazovia
Windows 98 Greek
POSTNET Barcode
PC-8 Code Page 437
Windows 98 Latin 1
Windows 98 Latin 2
ISO : German
PC-775 Baltic (PC-8 Latin 6)
Windows 98 Latin 5
ISO : Spanish
PC-850 Multilingual
Windows 98 Latin 6 (Baltic)
ISO 2: IRV (Int'l Ref Version)
PC-851 Greece
ISO 4: United Kingdom
PC-852 Latin 2
ISO 6: ASCII
PC-853 Latin 3 (Turkish)
ISO 10: Swedish
PC-855 Cyrillic
ISO 11: Swedish for Names
PC-857 Latin 5 (Turkish)
ISO 14: JIS ASCII
PC-858 Multilingual Euro
ISO 15: Italian
PC-860 Portugal
ISO 16: Portuguese
PC-861 Iceland
ISO 17: Spanish
PC-863 Canadian French
ISO 21: German
PC-865 Nordic
ISO 25: French
PC-866 Cyrillic
ISO 57: Chinese
PC-869 Greece
ISO 60: Norwegian version 1
PC-911 Katakana
ISO 61: Norwegian version 2
PC-1004 OS/2
ISO 69: French
ISO 84: Portuguese
ISO 85: Spanish

Note: Not all fonts support all of the symbol sets. Refer to the Technical Reference manual for your specific printer or use your printer operator panel to find which symbol sets are supported by each font.

Media Support

All models come standard with two 500 sheet paper drawers and one 35 sheet auxiliary tray. One 500 sheet output bin is standard. See tables below for standard and maximum media capacities.

Input Media Capacities (sheets)

Total
Aux Tray Drawer 1 Drawer 2 Drawer 3 Drawer 4 Drawer 5 Capacity
-------- -------- -------- -------- -------- -------- ---------
Standard 35 500 500 1035
2.5K Input 35 500 500 500 1000 1000 3535
Installed

Note: When the Envelope Feeder option is installed, the auxiliary tray is not useable.

Output Media Capacities (sheets)

Standard
Face-down Finisher Finisher Total
Bin Bin #1 Bin #2 Capacity
--------- -------- -------- --------
Standard 500 500
Finisher Installed 300 250 3000 3550

Note: Standard Bin capacity is 300 sheets with Finisher installed.

Media Sizes Supported

Input Media

Paper Size Aux. Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Env.
----------------------- ---- ------ ------ ------ ------ ------ ----
A4 (210x297 mm) Yes Yes(4) Yes(4) Yes(4) Yes(4) Yes(4) No
Letter (8.5"x11"] Yes Yes(4) Yes(4) Yes(4) Yes(4) Yes(4) No
Letter (8.5"x11"] Yes Yes Yes Yes Yes Yes No
A5 (148x210 mm) Yes Yes(4) No No No No No
B5-JIS (182x257 mm) Yes (1) (1) (1) (1) (1) No
B4-JIS (257x364 mm) Yes (1) (1) (1) No No No
Legal (8.5"x14"] Yes Yes(4) Yes(4) Yes(4) No No No
Folio (8.5"x13"] Yes Yes(4) Yes(4) Yes(4) No No No
Ledger (11"x17"] Yes Yes(4) Yes(4) Yes(4) No No No
A3 (297x420 mm) Yes Yes(4) Yes(4) Yes(4) No No No
Executive (7.25"x10.5"] Yes Yes(4) Yes(4) Yes(4) Yes(4) Yes(4) No
Statement (5.5"x8.5"] Yes Yes(4) No No No No No
7 3/4 Env. (98x191 mm) Yes No No No No No Yes(4)
Commercial #10 Env. Yes No No No No No Yes(4)
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No No No No No Yes(4)
DL Env. (110x220 mm) Yes No No No No No Yes(4)
Other Env.(2) Yes No No No No No Yes
Universal(3) Yes No No No No No No

Note: (1) Support for B4 and B5 require the "Size Sensing" setting be changed in the configuration menu. The user must set auto size sensing for B4 or Legal and B5 or Executive.
Note:
(2) 245 mm maximum width and 216 mm maximum length.
Note:
(3) 76 x 76 mm minimum size and 297 x 432 mm maximum size.
Note:
(4) Supported with Hardware Auto Size Sensing.

Output Media

Standard Finisher
Face-Down Main
Paper Size Bin Bin
---------- --------- --------
A4 (210 x 297 mm) Yes Yes
Letter (8.5" x 11"] Yes Yes
A5 (149 x 210 mm) Yes No
B5-JIS (182 x 257 mm) Yes Yes
B4-JIS (257 x 364 mm) Yes Yes
Legal (8.5" x 14"] Yes Yes
Folio (8.5" x 13"] Yes Yes
Ledger (11" x 17"] Yes Yes
A3 (297 x 420 mm) Yes Yes
Executive (7.25" x 10.5"] Yes Yes
Statement (5.5" x 8.5"] Yes No
Commercial #10 Env. Yes No
(104.8 x 241.3 mm)
C5 Envelope (169x229 mm) Yes No
DL Envelope (110x220 mm) Yes No
Other Env. Yes No
Universal Yes No

Note: Envelopes are automatically routed to the standard Bin if any other destination is selected.

Media Type and Weight Supported

Print Media Auxiliary Tray Trays #1, 2, 3 Trays #4, 5 Env. Feed
------------------ -------------- -------------- ------------ ----------
Copier/Xerographic Yes Yes Yes No
Card Stock Yes Yes No No
Labels Yes Yes No No
Transparencies Yes Tray 1 only No No
Envelopes No No No Yes

Weight 16 lb. (bond) 16 lb. (bond) 16 - 24 lb. 17 - 28lb
90 lb. (index) 90 lb. (index)
(60 - 163 gsm) (60 - 163 gsm) (60 - 90gsm) (64-105gsm)

Additional Media Guidelines

Follow the media guidelines below for successful printing:

  • Paper:
    • Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
    • Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.
    • Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the Infoprint 1145.
    • Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.
    • Recycled paper less than 80g/sqm may cause unacceptable results.
  • Envelopes:
    • All envelopes should be new, unused, and without package damage.
    • Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
    • Minimum weight: 75 g/m2 (20 lb.)
    • The following envelopes should not be used:
      • Envelopes with windows, holes, perforations, cutouts, or deep embossing.
      • Envelopes with metal clasps, string ties, or metal folding bars.
      • Envelopes with exposed flap adhesive when the flap is in the closed position.
      • For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
      • Under high humidity conditions (over 60%), envelopes may seal during printing.
  • Transparencies:
    • Use letter or A4-size sheets only.
    • Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint 1145.
  • Labels:
    • Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.

Differences Between Infoprint 11xx IPDS and Previous IBM Printers

The Infoprint 11xx printers have a different level IPDS support than the previous IBM workgroup printers. Some key differences are:

  • For emulation, the Infoprint 11xx printers emulate the 4028, 4312, 4317, 4324, 3812/16, and 3112/16. These are LF1 emulations ONLY.
  • Infoprint 11xx printers do not support "Manage IPDS Dialog".
  • Infoprint 11xx printers do not support Tray Protection.
  • Infoprint 11xx printers do not support Edge Protection.

Details on Card for IPDS and SCS/TNe Emulation

Product Overview:

  • The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident web server, a browser and the printer's IP address.
  • For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.
  • For Infoprint 1145 and IPDS emulation, offset stacking is supported in the printer's standard bin and the finisher bin. Stapling is supported for the finisher.

These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM AS/400 applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).

IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:

  • Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.
  • Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
  • No changes to host applications.
  • Supports emulation of common IBM IPDS and SCS printers.
  • Additional or new remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.
  • One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or AS/400 documents (AFP/IPDS, SCS).

With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an AS/400 or System/390 computer.

With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or AS/400 host printer. See the compatibility section for details.

With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an AS/400 or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the Devices Supported section for more details.

For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.

The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.

The IPDS emulation supports the IPDS data and resource towers. Fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.

The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.

Fonts

AFP/IPDS Font and Typestyle Support:

  • The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Interchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).

The following languages are supported:

  • Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English
  • Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian
  • Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian
  • Greek
  • Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.

The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.

The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.

The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.

The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.

Font Capture

Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer using PSF/MVS V2.2.0 and PSF/400 V4R2 or later. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.

PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.

Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.

If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.

The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.

AS/400

On the AS/400, Font capture is supported by AS/400 OS/400 V4R5 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG), set FNTCAPTURE (*YES).

Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Check for FNTCAPTURE (*YES). Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.

For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.

Mainframe (MVS and VSE)

Font capture is supported by PSF/MVS 2.2.0 with APAR 0W08340. With PSF/MVS, use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.

Font capture is supported by PSF/VSE 2.2.1 with APAR DY43969. With PSF/VSE, use APSRMARK to mark eligible fonts if they are not already marked.

SCS Font and Typestyle Support

The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.

On the AS/400, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.

A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.

These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).

Compatibility

For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.

Support Notes:

  • Microcode updates and User's Guides are available from the IBM web site
  • See the appropriate User's Guide for configuration instructions
  • When the printer is emulating an IBM printer, the function supported depends on the IBM host software

SCS LU1 Printing using a Gateway and TCP/IP

If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or AS/400. Examples of these gateways are: as follows:

  • IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp
  • Microsoft NetResults SNA Server 4.0
  • Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server
  • Attachmate E-Vantage SNA Gateway 2.0
  • Barr Systems Communications Server
  • Cisco TN3270 Server
  • OpenConnect using the WebConnect SNA Access Server or SNA Print Server

Agency Approvals

The Infoprint 1145 printer complies with the global safety standard for Information Technology Equipment, IEC 60950, and its country equivalents in the markets we serve. The following sections highlight the approvals and certifications that Infoprint 1145 is expected to receive.

Low Voltage Models

  • Underwriters Laboratories, Inc. UL 1950, Third Edition, Information Technology Equipment
  • U.S. FDA, CDRH registration per 21 CFR Chapter I, Subchapter J, Section 1040
  • Energy Star compliant
  • FCC Class B (w/o INA), Class A (w/INA) per FCC Rules, Parts 2 and 15
  • Canadian Standards Association CAN/CSA-C22.2 No. 950-95, Third Edition, Information Technology Equipment Note: This and the UL standard are a single "bi-national" document, published jointly with UL
  • Industry Canada (EMC) Compliance Statement
  • IEC 320-1, International Standard Electrical Appliance Connector
  • Official Mexican State Agency approval & import registration to equipment standard NOM-019-SCFI-1993 Safety of Data Processing Equipment

High Voltage Models

  • International Chemical Registration
  • International Electrotechnical Commission IEC 60950 2nd Edition, plus Amendments 1, 2, 3, 4
  • EN 60950 + Amendments 1, 2, 3, 4
  • IEC 60825-1, International Standard Safety of Laser Products
  • EN 60825-1
  • EN 55022: 1998
  • EN 55024: 1998
  • EN 61000-3-2: 1995 & EN 61000-3-3: 1995
  • IEC 320-1, International Standard Electrical Appliance Connectors
  • CB Certificate and Test Report to read as follows:
    • A sample of the product was tested and found to be in conformity with IEC 60950 Edition 2, with amendments 1 (1992), 2 (1993) 3 (1995), and 4 (1996); National Deviations AT, AU, BE, CH, CN, CZ, DE, DK, EN, FI, FR, GB, GR, HU, IE, IL, IS, IT, KR, NL, NO, PL, RU, SE, SI, SG, SK, UA, YU and ZA. (IEC 60825-1 Laser Safety Report shall be included).
  • European Union - CE marking via EU Declaration of Conformity to the EMC (89/336/EEC) and low voltage (73/23/EEC) Directives
  • CISPR Class A (with INA, networked attached)
  • CISPR Class B (Non-networked)

802.11g Wireless to Ethernet

Specifications

Model ACR-201-G
Standard IEEE 802.11g, 802.11g WPA-TKIP, WPA-PSK
Host Interface Ethernet, 802.3, RJ-45 receptacle
Frequency 2.4835 GHz (US and Europe)
RF Channels 11 channels (US, Canada)
13 channels (Europe, except France)
4 channels (France)
Transmission power 14 dBm at antenna input typical for 802.11g
16.2 dBm at antenna input typical for 802.11b
Receiver sensitivity -65dBm @ 54Mbps, -80sBm @11Mbps at 1e-5 BER
Typical
Antenna Dipole antenna with ~2dBi gain
Data Rate 1/ 2/ 5.5/ 6/ 9/ 11/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Modulation OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) DBPSK,
DQPSK, CCK (11b)
Link Distance ~1200 ft in open space
Network Types Support both the ad hoc mode and the
infrastructure mode
Data Encryption Support WPA-TKIP, WPA-PSK and 128/64-bit WEP
LED Indicators 4: Power, Transmission, Receiving,
Link/Ethernet-connection
Network Protocol TCP/IP, IPX/SPX, AppleTalk
Support

Printer Management Utilities

MarkVision Professional (provided on the printer CDs)

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser. It provides IT administrators with real time device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

The 802.11g Wireless to Ethernet acts as a wireless Ethernet bridge. When used with a Lexmark printer that supports MarkVision Professional management capabilities, the wireless bridge provides the same level of functionality as if the printer were connected to the network via a wired connection.

MFP Information / Compatibility

When used with a network-capable MFP, the 802.11g Wireless to Ethernet provides network capabilities equivalent to a MFP connected to a wired 10/100BaseTX Ethernet network.

Network Security

The 802.11g wireless to Ethernet supports the following wireless security methods and protocols:

  • WPA-Personal-level security:
    • TKIP
    • Pre-Shared Key (PSK)
  • WEP:
    • 64-bit
    • 128-bit

These security modes cannot be used in combination. For example, if a user selects WPA-personal, the user cannot enable WEP security features.

In addition to the wireless security methods, the 802.11g Wireless to Ethernet included with the printer or MFP provides the following access control methods that an be used in conjunction with any wireless security methods stated above:

  • Device configuration password protection
  • Restricted Server List

Operating System Support

  • Workstation Operating Systems:
    • Apple Mac OS 8.6-9.x (LPR printing)
    • Apple Mac OS X.2 and above (Zero Configuration support)
    • Windows 98SE, Me
    • Windows NT 4.0(1)
    • Windows 2000
    • Windows XP
    • Red Hat Linux 7.3, 8.0, 9.0(1)
    • SuSE Linux 8.0, 8.1, 8.2(1)
  • Server Operating Systems:
    • Apple Mac OS X.2 Server and above
    • Windows NT 4.0 Server(1)
    • Windows 2000 Terminal Server
    • Windows 2000 Server, Advanced Server
    • Windows Server 2003
    • IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(1)
    • Virtually any platform supporting TCP/IP(1)
    • Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
    • Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(1)
    • Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(1)
    • Red Hat Linux 7.3, 8.0, 9.0(1)
    • SuSE Linux 8.0, 8.1, 8.2(1)

Note: (1) May require initial configuration through Ad-hoc mode.

Printing Protocols

The 802.11g Wireless to Ethernet feature is compatible with all network protocols supported by the printer.

802.11g Wireless to USB

Network Security

The 802.11g wireless to USB supports the following wireless security methods and protocols:

  • WPA-Personal:
    • TKIP
    • Pre-Shared Key (PSK)
  • WEP:
    • 64-bit
    • 128-bit

These security modes cannot be used in combination. For example, if a user selects WEP, the WPA-Personal cannot be enabled. In addition to the wireless security methods, the print server provides the following access control methods:

  • Device configuration password protection
  • Restricted Server List

Operating System Support

  • Workstation Operating Systems:
    • Apple Mac OS 8.6, 9.x (LPR printing)
    • Apple Mac OS X 10.2 and above (Zero Configuration support)
    • Windows 98SE, Me
    • Windows NT 4.0(2)
    • Windows 2000
    • Windows XP
    • Red Hat Linux 7.3, 8.0, 9.0(2)
    • SuSE Linux 8.0, 8.1, 8.2(2)
  • Server Operating Systems:
    • Apple Mac OS X.2 Server and above
    • Windows NT 4.0 Server(2)
    • Windows 2000 Terminal Server
    • Windows 2000 Server, Advanced Server
    • Windows Server 2003
    • IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(2)
    • Virtually any platform supporting TCP/IP(2)
    • Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
    • Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(2)
    • Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(2)
    • Red Hat Linux 7.3, 8.0, 9.0(2)
    • SuSE Linux 8.0, 8.1, 8.2(2)

Note: (2) May require initial configuration through Ad-hoc mode.

Printing Protocols

The following print protocols are supported:

  • Direct IP (TCP 9100)
  • LPR/LPD (TCP 515)
  • IPP (Internet Printing Protocol) (TCP 631 or TCP 80)
  • HBN (Host Based Networking)

Address Management Protocols

The following address management protocols are supported:

  • Auto-IP
  • DHCP
  • DDNS
  • mDNS
  • ARP
  • WINS

Device Management Protocols

The following device management protocols are supported:

  • Zero Configuration
  • HTTP
  • ICMP
  • SNMP
  • HCP Host Configuration Protocol
  • Telnet 9000

File Transfer Protocols

The following file transfer protocols are supported:

  • FTP (printing, UCF file configuration)
  • TFTP (printing, code updating)

IPDS is not supported through the USB port.

Network Management

These features provide management capabilities primarily via its embedded web server. Basic network management is also provided using traditional TCP/IP functions.

Basic Management

The following basic management applications are supported:

  • Ping
  • Finger
  • Telnet 9000
  • Discovery Utility

Advanced Management

These features are designed to allow the user to learn network status and configure network settings remotely. The printer server support

  • the following management methods:
  • Embedded Web Server
  • SNMP
  • Universal Configuration Files (UCF)

Embedded Web Server Function

Supported Web Browsers

  • Microsoft Internet Explorer 5.0, 6.0 and newer
  • Netscape 4.0, 7.0 and newer
  • Safari 1.0 and newer

Primary Web Server Functions

The following items are available regardless of the status of the USB-attached device:

  • Name and picture of print server
  • Wireless status (connect speed, signal strength, Access Point)
  • Print Server Setup Page
  • Configuration of all general adapter settings (LAA, Contact Name, Locations, Etc.)
  • Configuration of all TCP/IP settings
  • Configuration of password
  • Links and Index section
  • Link to Troubleshooting
  • Applet to flash update

Certifications

802.11g wireless to Ethernet

These features meet the following standards and has obtained the appropriate approvals.

  • UL 60950-1: Safety of Information Technology Equipment
  • Code of Federal Regulations 47, FCC Part 15 (Class B)
  • FCC Part 15 Subpart C Section 15.247
  • FCC Declaration of Conformity (DoC) Mark on the label
  • Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
  • Industry Canada RSS-210
  • UL 60950 3rd Edition

802.11g wireless to USB

These features meet the following standards and has obtained the appropriate approvals.

  • Code of Federal Regulations 47, FCC Part 15 (Class B)
  • FCC Part 15 Subpart C Section 15.247
  • FCC Declaration of Conformity (DoC) Mark on the label
  • Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
  • Industry Canada RSS-210
  • Underwriters Laboratories, Inc., UL 60950-1
Physical Specifications

The base models are table-top. However, the addition of the High Capacity Feeder makes it a floor-standing printer.

Dimensions below do not include packaging.

Width Depth Height Weight (1)
------------- ----------- ----------- --------------
Base Network 902 mm(35.5"] 559 mm(22"] 483 mm(19"] 47.7 Kg(105lb)
Printer

Base with Duplex 972 mm(38.25"] 559 mm(22"] 483 mm(19"] 52.7 Kg(116lb)

Base with Duplex, 972 mm(38.25"]629 mm(24.75"]1372 mm(54"]109.7 Kg(241lb)
HCF

Base with Duplex, 1486 mm(58.5"] 584 mm(23"]1257 mm(49.5"]144.1 Kg(317lb)
HCF, Finisher

Note: (1) Weights shown are for low voltage model. Add 2.7 Kg (6 lbs) for high voltage models.

Recommended Clearances

Width Depth Height
------------ ------------ -----------
Base Network Prntr 1092 mm(43"] 1067 mm(42"] 711 mm(28"]

Base with Duplex 1168 mm(46"] 1067 mm(42"] 711 mm(28"]

Base with Duplex, 1168 mm(46"] 1143 mm(45"] 1702 mm(67"]
HCF

Base with Duplex, 2057 mm(81"] 1067 mm(42"] 1524 mm(60"]
HCF, Finisher Operating Environment
  • Operating Temperature: 15.6C to 32.2C (60F to 90F)
  • Relative Humidity: 8% to 80%
  • Maximum Wet Bulb Temperature: 23C (73F)
  • Altitude: 2,500 meters (8,200 feet)

Shipping Environment

  • Shipping Temperature: -40C to 60C (-40F to 140F)
  • Relative Humidity: 5% to 100%
  • Maximum Wet Bulb Temperature: 30C (85F)
  • Altitude: 10,300 meters (34,000 feet)

Shipping Environment for Supply Items

  • Shipping Temperature: -40C to 40C (-40F to 104F)
  • Relative Humidity: 5% to 100%
  • Maximum Wet Bulb Temperature: 27C (80F)

Storage Environment

  • Storage Temperature: 0.6C to 60C (0F to 140F)
  • Relative Humidity: 5% to 80%
  • Maximum Wet Bulb Temperature: 30C (85F)
  • Altitude: 10,300 meters (34,000 feet)

Storage Environment for Supply Items

  • Shipping Temperature: 0.6C to 40C (0F to 104F)
  • Relative Humidity: 5% to 80%
  • Maximum Wet Bulb Temperature: 27C (80F)

Electrical Specifications

Low Voltage Models

  • 120 - 127 V AC at 50 to 60 Hz, nominal
Power Consumption & Thermal Output
  • Printing: 1.2 KW or less
  • Sleep Mode: 47 W or less

Notes:

  1. Using a 220 V AC to 110 V AC power converter with the low voltage model is not recommended.
  2. All models are ENERGY STAR compliant

Acoustics

All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

Meter Average Sound Pressure, dBa

Mode Printer only Printer with Duplex, HCF, Finisher
---------------- ------------ ----------------------------------
600 dpi printing 55 dBa 58 dBa
Standby mode 28 dBa 28 dBa

Limitations

Not applicable.

Hardware Requirements

See the Devices Supported section for information on compatible hardware devices.

Software Requirements

Client Operating System Support

Infoprint 1145 is compatible with applications running under the following operating systems for either local or network connections:

  • Microsoft Windows 95 4.00.950 or higher
  • Microsoft Windows 98, 98 2nd Edition
  • Microsoft Windows Me
  • Microsoft Windows 2000
  • Microsoft Windows NT 4.00 or higher
  • Virtually any platform supporting TCP/IP
  • IBM AS/400(R) System with TCP/IP
  • IBM Application System/400(R) with Operating System/400(R) Version 3 Release 1 or later utilizing OS/400 Host Print Transform function
  • UNIX Systems:
    • Caldera OpenLinux 2.3 or later
    • Compaq Tru64 (Digital) UNIX 4.0
    • HP-UX 10.x, 11.x
    • IBM AIX 4.x
    • Red Hat Linux 5.2, 6.0 or later
    • SCO OpenServer 5.x
    • SCO UnixWare 2.1.x, 7
    • SGI IRIX 6.x
    • Sun Solaris x86 2.5, 2.6, 7, 8
    • Sun Solaris 2.5, 2.6, 7, 8
    • SuSE 6.1 Linux or later
    • TurboLinux Workstation 3.6 or later

MarkVision Professional and printer drivers are provided on the MarkVision, Drivers and Utilities CD that is packaged with the printer. See Package Contents for details.

Note: Enhanced printer drivers for Linux and UNIX are available from the IBM Web site. Drivers for Windows 3.1x, Windows NT 3.51 and OS/2 are also available from the IBM Web site.

MarkVision for UNIX Systems is recommended to assist in remote printer setup for UNIX platforms.

Note: MarkVision for UNIX Systems, MarkVision for Sun Systems, MarkVision for Windows 95/98/NT, Windows 2000 and MarkVision for Macintosh are available from the IBM Web site.

The Windows software applications which operate in the operating systems listed above are best suited to run with the drivers supplied with the Infoprint 1145 printer. These Infoprint 1145 drivers take advantage of your printer functions and increase the printer performance wherever possible.

Note: The Infoprint 1145 printer with an optional Tri-Port Adapter, Ethernet (EtherTalk) or Token-Ring (TokenTalk) MarkNet N2000 Internal Print Server installed supports the Apple operating system. The software applications that operate with most Apple LaserWriter printers will generally operate with Infoprint 1145. The Macintosh 128, 512, and 512e Computers are not supported.

Software Compatibility for AFP/IPDS Printing over TCP/IP

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:

  • Print Services Facility(PSF)/MVS Version 2.2 or later
  • Application System(AS)/400 Operating System(OS)/400 V4R5, V5R1 or later through PSF/400(1)(2)
  • PSF for OS/2 (PSF/2) 2.0 or later
  • PSF for AIX (PSF/6000) 2.1 or later

Note: (1) The IBM AS/400 software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:

  • AS/400 OS/400 V3R7 or later with all PTFs applied

Note: (2) Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same. The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:

  • IBM Communications Server (CS) for OS/390 Version 2 Release 5 or later on ESA systems (Note: all appropriate APARs must be applied)
  • TCP/IP for MVS Version 3 Release 2 or later
  • TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)
  • TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature
  • Using Cisco 7500 Series Routers

MarkVision Professional** (provided on CD)

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser. It provides IT administrators with real-time device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

MarkVision Messenger (Provided on CD)

MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. It enhances administrator's quality of service and improves end-user productivity and satisfaction.

NetPnP (Provided on CD)

NetPnP senses when a new IBM printer is attached to the network and automatically creates a shared printer object on the Windows NT 4.0 or Windows 2000 system. Furthermore, NetPnP notifies end-users via e-mail that the new network printer is available for printing. Designed for Windows NT 4.0 and Windows 2000 environments, Net PnP makes the IBM printers available to end-users within seconds of network attachment.

Software Installation and Distribution tools (Provided on CD)

In Windows NT 4.0 and Windows 2000 environments, it enables administrators to push IBM software installation to other Windows NT 4.0 or Windows 2000 workstations or to write a script that will install specified IBM software on specified Windows NT 4.0 or Windows 2000 workstations on the network.

In Windows 9X environments, it enables administrators to write installation scripts that can be then distributed to other workstations. When executed these scripts will silently install all IBM software that is specified.

Solaris Ready for Sun Customers

The Infoprint 1145 network models are Ethernet-ready and include Enhanced Printer Drivers for Sun Systems and Sun-specific documentation on CD for seamless installation and use in Sun Solaris network environments. MarkVision for Sun Systems is available from the IBM Web site. The IBM Infoprint 1145 is certified Solaris Ready by Sun.

For Direct Coaxial Attachment - Software Compatibility

The IBM host software requirements for DSC/DSE or SCS printing when the printer is emulating an IBM 3812-01, 4224-01, 3287, 3268 or 4214 printer are as follows:

  • Any application or host software that generates the SCS or DSC/DSE data streams for one of the emulated printers such as:
    • VTAM Printer Support (VPS - Levi, Ray & Shoup (LRS) software)
    • JES/328X Print Facility V2R2 or later
    • Graphical Data Display Manager (GDDM) V2.3
    • RSCS V3.2 or later
    • VTAM
    • DisplayWrite/370 V1R2.1 or V2R1 or later (MVS/CICS or VSE/CICS)

The SCS data stream is supported by IBM MVS/CICS and VSE/CICS.

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:

  • Any application or host software that generates the AFP/IPDS data stream for one of the emulated printers such as:
    • PSF/MVS V2.2 or later
    • PSF/VSE V2.2.1, V2.2.0
    • PSF/VM V2.1.1, V2.1.0 (with maintenance)
    • VTAM Printer Support R70 or later (VPS - Levi, Ray & Shoup (LRS) software
    • GDDM V2.3 with APARs
    • RSCS V3.2 or later

The IBM host software requirements for SCS printing when the printer is emulating an IBM 3812 Model 1, 5219 D01/D02, 4214-02, 5225-01, 5224-01 or 5256-03 printer are as follows:

  • AS/400 OS/400 (All releases)
  • AS/400 OS/400 V3R6 with System Support Program (SSP) Release 7.5 or later
  • AS/400 SSP Release 7.1 or later

IBM Network Printer Manager (NPM)

NPM will have generic support for Infoprint 1145.

IBM Infoprint Manager

Infoprint Manager will have generic support for Infoprint 1145.

Network Printer Resource Utility (NPRU)

NPRU will not support the Infoprint 1145.

TCP/IP Network Port Monitor Utility

This utility will not support the Infoprint 1145.

LPR Remote Printing Client Utility

This utility will not support the Infoprint 1145. Special Feature Codes -- Chargeable

Note: Some of these features may no longer be available. Always check announcement letters to ensure if specific features listed here are available.

Mach Feature Part
Type Model Number Number Description
---- ----- ------- ------- ---------------------------------
4545 001 28P1800 Infoprint 1145 US (LV)
4545 n01 28P1802 Infoprint 1145 n US (LV)
4545 dn1 28P1804 Infoprint 1145 dn US (LV)

Feature Descriptions

All printer features are customer installable.

Input, Output & Other Media Features (#4621, #4622) Finisher
  • Minimum required = 0, maximum required = 1
  • Prerequisite = High Capacity Feeder (FC 4520) or Printer stand (FC 4530), Corequisite = none

The Infoprint 1145 optional Finisher has two output bins with bin full and empty sensing and supports stapling, hole punch and offset stacking. The Finisher is customer setup and attaches to the right side of the printer. The High Capacity Feeder or Printer Stand must be installed prior to installing the Finisher.

There are two orderable part numbers, Finisher 3-hole punch (FC 4621) and Finisher 4-hole punch (FC 4622). Power is supplied from the printer power supply therefore no separate external power source is required. Total output capacity is 3,250 sheets: Bin 1 is 250 sheets and Bin 2 is 3000 sheets (20lb/75g/m2, A4/Letter, plain paper).

(#4402) Duplex
  • Minimum required = 0, maximum required = 1
  • Prerequisite = none, Corequisite = none

The Infoprint 1145 optional Duplex is customer setup and attaches to the left side of the printer.

Duplex Feed Characteristics

Paper Size Orientation Duplex Support
---------- ----------- --------------
A5 LEF Yes
JIS-B5 LEF Yes
JIS-B4 SEF Yes
Executive LEF Yes
Letter LEF Yes
A4 LEF Yes
Ledger SEF Yes
A3 SEF Yes
Folio SEF Yes
Statement LEF Yes
Universal SEF No
7 3/4 Env. LEF No
Commercial 10 Env. LEF No
DL Env. LEF No
C5 Env. LEF No
Other Env. SEF No

Note: The Duplex feature does not support Cardstock, Transparency, Labels or Envelopes.

(#4520) High Capacity Feeder
  • Minimum required = 0, maximum required = 1
  • Prerequisite = none, Corequisite = none

The Infoprint 1145 optional High Capacity Feeder (HCF) provides three additional input trays (Tray 3, Tray 4, Tray 5) with a total capacity of 2500 sheets (20lb/75g/m2, A4/Letter, plain paper). This feature is customer setup and attaches below the printer (printer sits on top of HCF to provide mechanical and electrical connection). The input trays support sensing for size (see supported sizes below), tray presence, tray low, and tray empty. Other specifications are listed below:

Tray 3

  • Capacity: 500 sheets (20lb/75g/m2 plain paper)
  • Media type support: paper, bond, cardstock, labels
  • Minimum size: 75 mm x 125 mm (3" x 5"]
  • Maximum size: A3/11 x 17 "
  • Automatic size sensing: A3, A4, 11 x 17 in., legal, letter, executive (184.2mm x 266.7mm)

Tray 4/5

  • Capacity: 1000 sheets each tray (20lb/75g/m2 plain paper)
  • Media type support: paper, bond
  • Minimum size: 176 mm x 250 mm (7" x 10"]
  • Maximum size: 216 mm x 297 mm (8.5" x 11.7"]
  • Automatic size sensing: A4, letter, executive (184.2mm x 266.7mm)
  • Universal size support: No
(#4511) Envelope Feeder
  • Minimum required = 0, maximum required = 1
  • Prerequisite = none, Corequisite = none

The Infoprint 1145 optional Envelope Feeder is customer setup and attaches to the left side of the printer, replacing the auxiliary tray.

  • Capacity: 100 envelopes (20lb/75g/m2 COM10)
  • Media type support: envelopes (LEF only)
  • Minimum size: 98.4 mm x 162 mm (3.9" x 6.4"]
  • Maximum size: 176 mm x 250 mm (6.4" x 9.8"]
  • Automatic size sensing: No
  • Envelope Types: 73/4, COM10, DL, C5, Other Envelope

Envelope Feeder Limitations include:

  • The Envelope Feeder and auxiliary tray cannot be installed concurrently
  • All envelopes are directed to the printer Standard output bin regardless of output bin selected
  • Envelope conditioning is not supported
Memory, Flash Memory and Hard Disk Features

The Infoprint 1145 has three slots for memory and flash features. Only one flash feature is allowed. If more than one flash feature is installed, the feature with the largest capacity is used. If a flash feature and an Optra Forms flash feature are both installed, the Optra Forms flash feature is used.

The memory features for the Infoprint 1145 include the following SDRAM features:

(#4304) 4 MB Memory DIMM
  • Minimum required = 0, maximum allowed = 3
  • Prerequisite = none, Corequisite = none
(#4308) 8 MB Memory DIMM
  • Minimum required = 0, maximum allowed = 3
  • Prerequisite = none, Corequisite = none
(#4316) 16 MB Memory DIMM
  • Minimum required = 0, maximum allowed = 3
  • Prerequisite = none, Corequisite = none
(#4332) 32 MB Memory DIMM
  • Minimum required = 0, maximum allowed = 3
  • Prerequisite = none, Corequisite = none
(#4364) 64 MB Memory DIMM
  • Minimum required = 0, maximum allowed = 3
  • Prerequisite = none, Corequisite = none
(#4390) 128 MB Memory DIMM
  • Minimum required = 0, maximum allowed = 3
  • Prerequisite = none, Corequisite = none

The flash memory features include:

(#4030) 2 MB Flash DIMM
  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none
(#4032) 4 MB Flash DIMM
  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none
(#4034) 8 MB Flash DIMM
  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none
(#4036) 16 MB Flash DIMM
  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

If larger storage is required, an optional hard disk feature is also available. The hard disk with adapter feature is required for a hard disk support. The adapter plugs into one of the 2 connection slots. Multiple hard disk features may be ordered although only one hard disk can be installed at a time.

(#4329) 5+ GB Hard Disk with Adapter
  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none
Internal Local Connection Features

In addition to the standard USB port for all models and standard parallel port on the non-network models, each Infoprint 1145 model has two expansion slots that can be used for an optional hard disk, optional internal print servers, or optional local connections.

The following local connection options are supported:

(#4130) Tri-Port Adapter
  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

The Tri-Port Adapter supports three interfaces:

  1. RS-232/RS-422 Serial

    This serial port utilizes a standard 25-pin D-shell female connector at speeds up to 115,200 bps. It can be connected to most systems that support an RS-232C or RS-422 interface. Serial baud rates range from 1200 to 115,200 bps.

  2. Apple Macintosh or LocalTalk

    This port utilizes a standard 8-pin LocalTalk port for direct connection to an Apple Macintosh or LocalTalk network.

  3. Infrared

    The Infrared adapter (FC 4131) is required to use this port. The infrared adapter plugs into this port and provides a wireless I/R connection at up to 4 megabit per second (mbps).

    • Minimum required = 0, maximum allowed = 1
    • Prerequisite = Tri-Port Adapter (FC 4133), Corequisite = none

The Infrared adapter plugs into the Tri-Port adapter and provides a wireless interface for devices such as laptop computers and handheld computers and pocket PCs. Its transfer rates are up to 4 mbps.

(#4133) Parallel/USB Interface Card

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

This card provides a USB port and 1284-C parallel port. The USB interface offers data transfer rates of 12 mbps.

Note: USB is supported only under Windows 98, Windows Me, Windows 2000 operating systems, Sun's Sun Ray appliances running Sun Ray Server code version 1.2 or later, Sun Blade workstations, Windows Me, and Apple Macintosh i Mac computer with operating system 8.6 or higher. A USB cable is included with this card.

External Serial Adapter

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = base printer model (001/002) or Parallel/USB Interface card (FC 4133), Corequisite = none

This adapter is installed on the printer's parallel port and receives its power through the parallel port. It utilizes a standard 25-pin D-shell females connector and supports baud rates up to 19,200 bps for RS-232C or 38,400 bps for RS-422.

Cable Features

(#4182) Parallel 1284-C Cable 3-meters

  • Minimum required = 0, maximum allowed = no maximum
  • Prerequisite = none, Corequisite = none

For personal Computers and UNIX Workstations, the recommended PC parallel printer cable is required for attachment of the Infoprint 1145. It must be ordered separately.

(#4180) 10 Ft. Parallel Cable

  • Minimum required = 0, maximum allowed = no maximum
  • Prerequisite = none, Corequisite = none

For parallel attachment, this cable is recommended for ten feet or less and must be ordered separately.

(#4181) 20 Ft. Parallel Cable

  • Minimum required = 0, maximum allowed = no maximum
  • Prerequisite = none, Corequisite = none

For parallel attachment, this cable is recommended for twenty feet or less and must be ordered separately.

(#4183) 50 Ft. Serial Cable

  • Minimum required = 0, maximum allowed = no maximum
  • Prerequisite = none, Corequisite = none

For serial attachment, this cable is recommended for fifty feet or less and must be ordered separately.

(#4184) 2-meter USB Cable

  • Minimum required = 0, maximum allowed = no maximum
  • Prerequisite = none, Corequisite = none

For USB attachment, this USB cable is recommended and must be ordered separately.

IBM Application System/400

For serial attachment to the IBM AS/400 ASCII Workstation Controller, refer to the IBM AS/400 ASCII Workstation Reference and Example manual (SA41-9922) for specific cable information. The printer requires a Tri-Port adapter.

Network Connection Features

Network cards plug into the two expansion slots. Only card is allowed per network protocol. That is, only one Ethernet and only one Token-Ring card. One Ethernet and one Token-Ring card are allowed. Any of the non base models have Ethernet onboard and cannot have a 10/100BaseTX card installed. These models can have the 10Base/2 card installed but it will disable the onboard Ethernet.

Network Cards for Internal Print Server Features

Infoprint 1145 network models come standard with Fast Ethernet 10/100BaseTx built-in to the controller board.

(#4120) Token Ring attachment

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

(#4162) Ethernet 10BaseT/100BaseTX

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

(#4161) Ethernet 10BaseT/2

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

Network Cards for External Print Servers Features

These external Print Server features allow the printer to be connected to a network using the printer's parallel or serial port. These features are in addition to any internal print server features.

(#4163) Ethernet 10BaseT/100BaseTX-1 port

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133), Corequisite = none

This external print server has one parallel port to connect to a Ethernet 10BaseT/100BaseTX network.

(#4165) Ethernet 10/100BaseTX/10Base2-1 port

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133), Corequisite = none

This external print server has one parallel port to connect to a Ethernet 10BaseT/100BaseTX or 10Base2 network.

(#4164) Ethernet 10BaseT/100BaseTX-3 port

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133) or Tri-Port Adapter feature (FC 4130) or External Serial Adapter feature (FC 4132), Corequisite = none

This external print server has two parallel ports and one serial port to connect up to three printers to a Ethernet 10BaseT/100BaseTX network.

(#4170) 802.11b Adapter

  • Minimum required: 0
  • Maximum allowed: 1
  • Prerequisite: Network model or Ethernet feature
  • Co-requisite: None

This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11b wireless standard. This standard operates at speeds of up to 11 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building contruction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.

The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.

(#4171) Ethernet to USB Adapter

  • Minimum required: 0
  • Maximum allowed: 1
  • Prerequisite: USB port
  • Co-requisite: None

This adapter attaches to the printer's USB port and has one 10/100BaseTX RJ-45 port for connection to the network.

Note: This features is customer installable.

(#4121) Token Ring-3 port

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133) or Tri-Port Adapter feature (FC 4130) or External Serial Adapter feature (FC 4132), Corequisite = none

This external print server has two parallel ports and one serial port to connect up to three printers to a Token Ring network.

The MarkNet N2000 Series and MarkNet X2000 Series support Network Plug and Print 2.0 on Windows NT 4.0 and Windows 2000 systems.

The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:

  • TCP/IP
  • Novell (IPX/SPX including NetWare Directory Services)
  • AppleTalk**
  • LexLink** (DLC/LLC)

The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:

  • IPP: Internet Printing Protocol
  • SLP: Service Location Protocol
  • NTP: Network Timing Protocol

The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.

The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.

IBM Host Connection Features

(#4823) Decryption Card

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Infoprint 1145 printer with a standard network connection (n or dn models).
  • Co-requisite = none
  • Conflict = the decryption feature plugs into the firmware slot in the printer and is mutually exclusive with the application solution features including Card for IPDS and SCS/TNe (FC 4820), Bar Code (FC 4870) and ImageQuick Card (FC 4821). This feature cannot be installed on any of the "in" models.

Encryption Overview

This feature offers an encryption solution for print output on hosts such as a mainframe, UNIX server, Microsoft Windows PC or Apple workstation that connect over a TCP/IP network to the IBM workgroup printer. The decryption card is installed in the printer and decryption takes place at the printer for maximum security.

This decryption solution is based on Federal Information Processing Standard (FIPS-197) for the Advanced Encryption Standard (AES). This standard specifies Rijndael as the encryption algorithm. AES is the new encryption standard that replaces DES, the old standard. AES is a symmetric algorithm supporting key lengths of 128, 192, and 256 bits for encryption. A symmetric algorithm uses a single key for both encryption and decryption. A key length of 256 bits provides 1.1 times 10 to the power of 77 possible combinations which makes it extremely difficult for eavsdroppers to decrypt intercepted print jobs.

The decryption feature also supports sessions keys. Session keys are used during a specific host session with the printer. The key is different for every session providing maximum security. Most competitive decryption solutions don't support session keys.

Connectivity Requirements for Decryption Feature

The printer must be connected to an ethernet network using TCP/IP. This feature only work on printer models with a standard ethernet port. It will not work with any of the optional ethernet print server features. The decryption card plugs into the firmware slot in the printer and is mutually exclusive with the application solution features such as IPDS, Bar Code, and ImageQuick.

Unique TCP/IP port numbers are used for encrypted print jobs. The decryption card decrypts and prints information appropriate for the port.

This feature is supported on the following IBM drivers:

  • Sun Solaris 7, 8, 9
  • HP-UX 11
  • IBM AIX 4.3, 5.0
  • Linux (Re Hat, Caldera, SuSE, TurboLinux)
  • Windows 98/Me/NT4.0/2000/XP
  • Mac OS X

AS/400

AS/400 IBM Application System/400 (with Operating System/400 (Version 3 Release 1 or later utilizing OS/400 Host Print Transform. Use Manufacturer Type and Model (MFRTYPMDL) of LEXOPTRAT** (in OS/400 Version 4 Release 2 or later), LEXOPTRAS**, or LEXOPTRA**.

(#4141) Coax/Twinax Adapter for SCS

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

This card plugs into the expansion slots. Notes on the Coax/Twinax Adapter for SCS are below:

  • Coax/Twinax Adapter for SCS is FCC class A only
  • Microcode updates are available from the IBM web site at www.ibm.com/printers.
  • When the printer is emulating an IBM printer, the function supported depends on the IBM host software.
  • The SCS adapter uses PCL fonts from the printer for IBM host fonts. The default resolution of the printer determines the resolution of the SCS data and its PCL fonts.

Applications Solution Features

These features plug into the firmware card slot on the controller board. There is only one slot for either Bar Code card or ImageQuick card or card for IPDS & SCS/TNe (see IBM Environment Solution features).

(#4870) Bar Code Card Feature

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

The Bar Code Option Card enables the Infoprint laser printers to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Bar Code Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM/BarDIMM) (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.

(#4821) ImageQuickTM Card Feature

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

The ImageQuick Option Card enables the Infoprint laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.

(#4822) Card for PRESCRIBE**

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

The card for PRESCRIBE interprets the PRESCRIBE data stream designed for Kyocera PRESCRIBE printers and converts it into PCL. The Infoprint 1120/1125 with a card for PRESCRIBE can replace Kyocera Page Printers such as Kyocera FS-600, FS-800, FS-1500, FS-1550, FS-1600, FS-1700, FS-1700+, FS-3700, FS-6700, FS-7000.

Optra Forms Features

(#4871) Optra Forms Software Feature

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = Optra Forms flash or Hard Disk

Optra Forms uses 'up-to-the-minute' data directly from customer applications and combines it with printer resident electronic forms with text and graphics to produce (print) completed forms such as invoices, statements, pick slips, labels, purchase orders or confirmations with bar codes or other specialized graphics on a variety of paper types. For Optra Forms:

  • No Server-based or host based merge program or software is required.
  • Use with virtually any ASCII text print file from any platform, mainframe, AS/400, UNIX or workstation, over Coax, Twinax, parallel, serial or LAN (TCP/IP).
  • Generally, make no changes to database applications.
  • Print different forms at different locations from the same database, possibly using the same data.
  • Update forms quickly and easily (globally) over the LAN
  • Provides support for bar codes, color, duplex, multipage form sets and more.
  • Store forms as efficient, compact forms in flash.

Optra Forms is supported by the Infoprint 1145 printer using the Optra Forms 2, 4, 8 and 16MB Flash DIMM's or Optra Forms Hard Disk.

(#4872) Optra Forms Director Feature

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Optra Forms Software (FC 4871), Corequisite = none

Optra Forms Director is a Windows NT or Windows 2000 server-based program. Using additional host software (AS/400, UNIX or Mainframe), the host application sends a print spool file to a Windows NT or 2000 print queue. Optra Forms Director service automatically pareses the print spool file into single or multiple print jobs using Microsoft Visual Basic Script or JScript methods and Named Pipes.

The spool file which may contain many individual documents is customized by separating it into individual jobs or by adding data or particular commands to the individual documents that are then sent to IP, LPR, or Windows printer destinations. The additional data or commands may be to staple, separate documents with a cover page, copy and collate, print on both sides, offset stack, fax, or hole punch each individual job. Print jobs are customized and distributed electronically to network printers automatically without making any changes to host applications.

Optra Forms is supported on the Infoprint 1145 using an Optra Forms flash or Hard Disk. Only one Optra Forms flash DIMM is supported. If a Flash DIMM and Optra Forms Flash DIMM are both installed, the Optra Forms DIMM will be used.

(#4873) Optra Forms 2 MB Flash DIMM

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = Optra Forms Software

(#4874) Optra Forms 4 MB Flash DIMM

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = Optra Forms Software

(#4875) Optra Forms 8 MB Flash DIMM

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = Optra Forms Software

(#4876) Optra Forms 16 MB Flash DIMM

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = Optra Forms Software

(#4877) Optra Forms 5+ GB Hard Disk with Adapter

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = Optra Forms Software

(#4878) Optra Forms 2-Key Security

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Serial Port & Optra Forms SW, Corequisite = none

For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 3-key security feature (FC 4879).

(#4879) Optra Forms 3-Key Security

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Serial Port & Optra Forms SW, Corequisite = none

For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 2-key security feature (FC 4878).

IBM Environment Solution Features

(#4141) Coax/Twinax Adapter for SCS Feature

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Corequisite = none

The Coax/Twinax Adapter for SCS provides SCS (for Coax, DSC/DSE) data stream support with Infoprint 1145 printers for IBM mainframe and AS/400 customers who must print SCS over distributed SNA networks using a coaxial or twinaxial cable connected printer.

(#4530) Printer Stand Feature

  • Minimum required = 0, maximum allowed = no maximum
  • Prerequisite = none, Corequisite = none

The optional Printer Stand is customer setup and attaches below the printer (printer sits on top of the Printer Stand). The Printer Stand raises the printer to the correct height and provides the physical connection for the optional Finisher. The Printer Stand and the 2,500 sheet input unit feature cannot be installed concurrently.

(P/N 75P6445) Card for IPDS & SCS/TNe (Infoprint 1145)

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Co-requisite = none

This feature is installed in the flash memory/applications solutions slots.

The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM mainframe and iSeries computers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers

  • For IPDS, N-up and N-up Explicit Page Placement support has been added. Print 1 to 4 partitions per side or up to 8 pages per sheet when printing duplex pages.
  • For IPDS, Quick Response (QR) 2D barcodes are now supported in the bar code tower.
  • For IPDS, print DBCS downloaded outline and bitmap fonts from the host. Simplified Chinese, Traditional Chinese, Korean and Japanese can be downloaded and printed from the host

(P/N 75P6443) Decryption Card (Infoprint 1145)

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = Duplex Network model,
  • Co-requisite = none

This feature offers an encryption solution for print output on hosts such as a mainframe, UNIX server, Microsoft Windows PC or Apple workstation that connect over a TCP/IP network to the IBM workgroup printer. The decryption card is installed in the printer and decryption takes place at the printer for maximum security.

(P/N 75P6446) Barcode Card Feature (Infoprint 1145)

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Co-requisite = none

The Barcode Option Card enables the Infoprint 1145 MFP to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Barcode Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM( (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.

(P/N 75P6444) ImageQuickTM Card Feature (Infoprint 1145)

  • Minimum required = 0, maximum allowed = 1
  • Prerequisite = none, Co-requisite = none

The ImageQuick Option Card enables the Infoprint laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.

(P/N 75P6857) 802.11g Wireless to Ethernet

  • Minimum required = 0, maximum allowed = 1,
  • Prerequisite = network model or model with internal Ethernet card, Co-requisite = none

The IBM 802.11g Wireless to Ethernet allows customers to quickly place Ethernet-capable workgroup printers or multifunction priners (MFPs) on a wireless network. This wireless print adapter is a bridge that uses the existing Ethernet port of the printer or MFP, which in turn provides a wireless solution that is flexible and easy to use. It supports both 802.11b and 802.11g wireless standards. This feature includes one Ethernet (RJ-45) port for connection to the printer.

Very few steps are required to configure the 802.11g adapter. A setup utility is not needed, as the setup is done using your Windows-based browser. The 802.11g Wireless Print Adapter is also supported in a Mac OS X environment using the printer or MFP Zero Configuration networking, that allows automatic printer discovery to make it easier for users to locate devices on a network.

By using the existing Ethernet on the printer or MFP, the adapter supports all the networking capabilities the internal Ethernet card provides. This includes TCP/IP printing support (including port 9100 printing) and printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows the adapter to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.

Since the 802.11g wireless to Ethernet is transparent to MarkVision Professional, all mass management capabilities available in printers and MFPs are available to the administrator when using the 802.11g wireless to Ethernet. In addition to these capabilities, the device includes an embedded web server.

An embedded web server allows administrators to easily manage the wireless adapter through a standard web browser. While settings on the adapter are optimized for most environments, through a web browser an administrator can easily make changes to the device.

(P/N 75P6854) 802.11g Wireless to USB

  • Minimum required = 0, maximum allowed = 1,
  • Prerequisite = none, Co-requisite = none

The 802.11g Wireless to USB is a Wi-Fi Certified device supporting both 802.11b and 802.11g networking technologies and offers a USB 2.0 Full Speed port to connect to the printer. Its WPA personal security offers a high level of protection for value conscious consumers.

Setup is a breeze with this print server. In Microsoft Windows environments (98SE and above), it offers an intuitive setup wizard to guide the user through installation of most printers.

The 802.11g Wireless to USB also provides an easy installation for Mac OS X environments using Zero Configuration networking which allows automatic printer discovery, making it easier for users to locate devices on a network.

By offering TCP printing support (including port 9100 printing), this feature provides network printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows this feature to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.

An embedded web server allows administrators to easily manage the print server through a standard web browser. While settings on the print server are optimized for most environments, through a web browser an administrator can easily make changes to the device. Customizable settings allow the network administrator to get the most from this feature.

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.
IBM Corporation 2005.